How to fix a pushed in speaker dust cap or tweeter dome

Рет қаралды 27,188

Ultimate DIY

Күн бұрын

Пікірлер: 46

@UltimateDIY Жыл бұрын

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ THANK YOU FOR WATCHING! PLEASE LIKE AND SUBSCRIBE! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

@EdithMiller-bd4wk Жыл бұрын

THe vaccum finally worked but even that took some time. I had to use full on suction as the covesr are metal. Still some dents but hopefully they com out themselves! Thank You!

@UltimateDIY Жыл бұрын

Glad I could help!

@anuzisrolandas 10 ай бұрын

Likusius įlenkimus turėtų įveikti plaukų džiovintuvas.

@hackercoolio 5 ай бұрын

I thought of using the vacuum but wasn't sure.. but after this video.. tried the vacuum. Worked fine. Just need to be super careful

@UltimateDIY 5 ай бұрын

Exactly 👍🏻

@NIGHTDREADED 4 ай бұрын

Probably the most competent video ive seen on this topic, many thanks. Me dented speaker has the same cone type as the first one, the black plastic one. It is only slightly bigger than 40mm though, so vacumn tube is a bit big... Might have to make adapter. I also have brown painters tape, should I try it?

@UltimateDIY 3 ай бұрын

Welcome! It's your decision if you try it or not.

@lordeuronymous 5 ай бұрын

My technics ex7 speaker the woofer cone is pushed in. It’s a composite mica material, so I’m guessing the vacuum trick would work fine.

@UltimateDIY 5 ай бұрын

Really hard to guess what works. It's more about trial and error.

@lordeuronymous 4 ай бұрын

@@UltimateDIYI guess it’s more comparable to the metal aluminum dust cap.

@UltimateDIY 4 ай бұрын

Most likely

@Curious-z4s 10 ай бұрын

Try brown packing tapes. It will pull out the sunken dome in one attempt. Also the pulling out motion and direction of the tape has to be not perpendicular to the dome but sideways.

@UltimateDIY 10 ай бұрын

Thanks for this info 👍🏻

@danyalarafat1271 6 ай бұрын

I justed a vacuum for a sandwich bag and worked from temu but I was using it for a blue tooth remember no pokey thanks Mr pokey

@UltimateDIY 6 ай бұрын

Welcome! 🤭

@micksterminator3 5 ай бұрын

i used the tape method on some "broken" fluance ai60s I got for 20usd. I had to stick some packing tape pretty well to it then pulled straight out. was left with a few indentations. i wonder if a heat gun at low temps would work well. i guess i could even try just placing them outside. its 45 c where I am at lol

@UltimateDIY 5 ай бұрын

Probably placing outside is safer. Heatgun can cause lots of damage really quickly.

@storungz 10 ай бұрын

A vacuum... GENIUS idea thank you!

@UltimateDIY 10 ай бұрын

You're welcome!!

@kitbuster Жыл бұрын

Some great ideas there

@UltimateDIY Жыл бұрын

Thanks! ✌🏼

@kylesanders8276 10 ай бұрын

Very helpful, thank you

@UltimateDIY 10 ай бұрын

You're welcome!

@ImTiredOfFindingAGoodHandle 4 ай бұрын

is there any way to fix a tweeter with a grill in front of it? i cant get the vaccum to work.

@UltimateDIY 4 ай бұрын

No idea without seing myself.

@stargatewv Жыл бұрын

Very good. Thank you.

@UltimateDIY Жыл бұрын

Welcome!

@Yoyo-me Жыл бұрын

Wow...boxe Unitra... Hmmm...erau tari la vremea lor Eu zic ca merita restaurate. Stima

@UltimateDIY Жыл бұрын

Dap, clar. Mi le-a dat un prieten in starea asta. Cu aiguranta o sa le restaurez cand am putin timp liber.

@nataliegrn17 Жыл бұрын

Genius

@UltimateDIY Жыл бұрын

Thank you 🤭

@spazoq 6 ай бұрын

Hot glue gun.

@UltimateDIY 6 ай бұрын

Would damage the plastic and might rip the surface of the paper one.

@spazoq 6 ай бұрын

@@UltimateDIY I watched a few who used just the stick, it seems hit or miss.

@UltimateDIY 6 ай бұрын

A bit too risky for me.

@seano51 3 ай бұрын

Thank you for the glue gun suggestion. The vacuum did not work but gluing a small nail to the dome and pulling up once the glue cooled worked perfectly. I used a heat gun to then melt the glue to remove it.