I liked your analysis of the problem and coming up with a solution. Many consumer appliances have such built in design faults. It requies to expose such things. Kudos to you.
@day_dreamer_dan2 жыл бұрын
Thank you so much. I'm glad you found it useful. Feel free to check out my other videos as well and do subscribe to my channel it helps to keep me motivated and create more content.
@അച്ചായൻ-ഖ9ട Жыл бұрын
😊😊
@midhunpm2277Ай бұрын
Perfect work perfect class
@day_dreamer_danАй бұрын
Thank you
@day_dreamer_danАй бұрын
Thank you
@maleeqadefalu20472 жыл бұрын
Now I need to go gemba. Very insightful video. Thanks 👍
@day_dreamer_dan2 жыл бұрын
Welcome sir
@day_dreamer_dan2 жыл бұрын
Thank you for subscribing
@kibgsleyjayalath28683 жыл бұрын
Thanks for you solution
@daljeetsingh3163 жыл бұрын
It was the lockdown , so I try do this 😂this works perfectly ,
@day_dreamer_dan3 жыл бұрын
I'm glad it did work out for you. This method may need maintenance after 6-7 months. You can try using metal washer rings instead of cable tie for more permanent solution, but it may damage the plastic.
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel, it will help me make more helpful videos
@venkataramaiyer541311 ай бұрын
I got one top load machine, have to try your tips. If successful will give result.
@AllinOne-cl4xz3 жыл бұрын
I watched some videos of repair personnel but yours gives insight into what really goes wrong explaining that the gaps become too big. Thanks, very good explaining
@day_dreamer_dan3 жыл бұрын
Thank you so much, means alot..
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel, it will help me make more helpful videos
@sreejithk2203 жыл бұрын
Thanks .Iam facing this problem currently.Drum hitting around the body, while spinning.
@day_dreamer_dan3 жыл бұрын
Best solution is to change rod, you will get on Amazon or local shop for 1000rs
@sreejithk2203 жыл бұрын
@@day_dreamer_dan ok thanks your valuable advice.
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel
@ralphhunt8007Ай бұрын
Do not put any Lithium White Grease on the rod. It will become very stiff and sticky in time until the spring cannot function freely. When the spring doesn’t function freely the computer detects it and stops the machine from spinning. There is NOTHING wrong with your rods or springs. Just use regular bearing grease on it and you will get years of trouble free service from them.
@RickyPisano2 жыл бұрын
You nailed it brother. The plastic parts were moving freely on my old suspension rods. Just replaced them.
@day_dreamer_dan2 жыл бұрын
Thank you for your kind words of support. Please do consider subscribing it helps keep me motivated
@rickeykeeton47702 жыл бұрын
How long did the repair last?
@day_dreamer_dan2 жыл бұрын
The fix lasted a good 8 months after which one of the nylon ties broke apart and slowly and steadily due to imbalance the rest gave way too. I simply used fresh nylon ties again and it's going great for quite some time now. The other alternative is to replace the entire rod set but that's not going to last beyond a couple of years on regular daily use too. This issue arises due to unbalanced loading of clothes in the first place resulting in some of the rods wearing out earlier than others. If you found this video useful do consider subscribing to support the channel.
@amanattar9343 Жыл бұрын
Which place the blue one and white one shouker where to stuck in washing machine front side or back side ?? Plz tell me
@maak96022 жыл бұрын
I hope ur machine work My suggestion go back and open and apply some white silicon grease or any u have that keep the plastic some friction .
@jeffhruska8626 Жыл бұрын
you need to use damping grease. then you won't need to wire ties
@kuldeepdinkar49183 жыл бұрын
Gosh I was bothering about how to open drum. That huge nut is as big as 2 inch no wrench is available here. 🤦🏻♂️
@madankumarsharma14892 жыл бұрын
No best more time spend to seen the shoker spring
@SolvingSkills24 күн бұрын
Thank you for this tutorial
@day_dreamer_dan10 күн бұрын
You're welcome!
@rajarapuswamy2 жыл бұрын
You are change spring rods. But 4 sides and inner heavy dust . You are not cleaning that.remove and fixing not shown clearly. Any how good.
@gobinathrukmangathanАй бұрын
Really great thinking and suggestions
@weseehowcommiegoogleis37702 жыл бұрын
Re apply the Sticky lube Dow Corning 111 to make these like new.
@fknucklewit2 жыл бұрын
Cheers from Australia mate. Did my Simpson 7.5kg washing machine the other day.
@day_dreamer_dan2 жыл бұрын
I'm glad i got a solution for you to try out! Do let me know how it turns out going forward. And don't forget to distribute clothes weight evenly prior to spin cycle. If you found this video useful, please do subscribe.
@Live_Loud2 жыл бұрын
This is juggad! I don't think will work even for a month!
@day_dreamer_dan2 жыл бұрын
Yes it is! It does last about 3-4 months on regular use. A lot depends on clothes weight distribution. You can always purchase new part which will cost a significant percentage of your depreciated appliance value or new appliances which is over kill and is like buying a new house because your light bulb stopped working. At the very core it's more about planned obsolescence or bad part design. I observed having rubber rolls secured by cable ties make this solution last much longer but again weight distribution of clothes is key.
@Live_Loud2 жыл бұрын
@@day_dreamer_dan I agree. I disposed old machine and brought new one. Electronics are not built to last these days.
@day_dreamer_dan2 жыл бұрын
@@Live_Loud i see new machines with active weight distribution monitoring system. It alerts you if there is an imbalance and/corrects for the imbalance. Just leads to more complicated system.
@Live_Loud2 жыл бұрын
@@day_dreamer_dan more automation = more maintenance!
@day_dreamer_dan2 жыл бұрын
Yes you are right. Please do subscribe to the channel it will help the channel grow.
@ashutoofani66753 жыл бұрын
What are exact possible reasons for drum unbalance during spin hitting body
@day_dreamer_dan3 жыл бұрын
1. Uneven flooring 2. Uneven clothes load distribution 3. Worn out dampner rods 4. Incorrect dampner rod installation
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel
@ranat5526 Жыл бұрын
Great insight of a planned faulty design, I guess a small o ring within the plastic body should be able to stop the grease leaking out but was never designed for one.
@gadhvipravin13286 ай бұрын
English ko 6odo.. Hindi bolo Bhai .. 😅😅😅😅😅😅😅
@jasonsanitz5623 Жыл бұрын
Thanks for sharing your knowledge!
@day_dreamer_dan Жыл бұрын
You're welcome, please do consider subscribing to the channel
@sukhdeepsingh92532 жыл бұрын
Bosch washing Machine spin shaking problem h
@ngocthachnguyen33212 жыл бұрын
Can you do some with Fisher&paykel, thanks
@day_dreamer_dan2 жыл бұрын
I'm sorry i do not have access to these machines
@terryhelliker1185 ай бұрын
I tried this and it doesn’t stop the tub from swaying side to side. I’ve replaced all 4 rods and even changed the hub.
@day_dreamer_dan4 сағат бұрын
This is a temporary solution. Long term and reliable solution is always replacing
@AFTABAHMED41 Жыл бұрын
how can conform with out load?
@SohailKhan-qy7ms7 ай бұрын
I have ifb topload shockers bushes are same but the springs colors tow of them gold and two of them steel...which color spring has install front and back side..pls rwply me.
@day_dreamer_dan7 ай бұрын
Unfortunately I do not have a answer for this, please try to remember which spring was in which position at time of opening or else refer to the user manual for information if any
@ranveerclub8712 жыл бұрын
Good
@tejashwibhaskar10 ай бұрын
shaking banging possessed ............ exactly wat my wife said for repairing the shocks .
@frankschest85842 ай бұрын
Really good bro. I tried to replace them. But since mine is not branded, it was not successful. Thanks for this!!
@day_dreamer_dan9 сағат бұрын
Welcome!!
@nagarajchennamallu71473 жыл бұрын
Mine LG TOP LOADING WASHING MACHINE...drum banging either side .. on start of SPIN MODE...and changing to Rinse and spin mode again .. Even upon changing .mthe four suspension spring ..blue and white ..no improvement.....pls guide ..what else can be problem... drum banging to sides ..and cloths are bundleing to one side drum is banging to sides...
@day_dreamer_dan3 жыл бұрын
Best solution is to replace the dampner rod, u can new in shop or on Amazon for 1500rs. If you don't want to replace the rod then at the start of the cycle make sure the clothes are not entangled and the weight is evenly distributed. If your washing has low spin mode then that would help too.
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel
@raoamarjeet54732 жыл бұрын
Nice
@naryanav24453 жыл бұрын
Hai brother, can you please help me, samsung fully automatic washing machine top load, stainless steel drum can we remove, steel had a rust, so how much price to replace steel drum, 7.5kg
@day_dreamer_dan3 жыл бұрын
Im not sure about the price but it will definitely be high, you can buy a new machine instead. You can get semi automatic from 6k₹ and fully automatic from 10k₹
@naryanav24453 жыл бұрын
@@day_dreamer_dan thank you, bro, does fully automatic washing machine coming with plastic drum,, this is second timeth washing machine steel rusting.
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel, it will help me make more helpful videos
@homecareservice95813 жыл бұрын
Why sound toplood LG washing
@day_dreamer_dan3 жыл бұрын
Suspension rod problem
@highoff40473 жыл бұрын
Verry good Sir
@waltongraham70318 ай бұрын
Good Video. Thanks
@kuldeepdinkar49183 жыл бұрын
mic bro.
@azimjonkushbaev16412 жыл бұрын
Hi, what type of (size, material type) cable ties did you use for this?
@day_dreamer_dan2 жыл бұрын
Standard, 6 inch nylon cable ties. You can ask in your hardware store buying many together is cheaper. Please do subscribe to my channel if you found the video useful.
@SohailKhan-qy7ms5 ай бұрын
Bro...i have ifb topload..new rods are installed stiil it is banging like anything...pls tell me the roda are having gold and silver color... which color has to install front and rear side.
@oscarmarfori61310 ай бұрын
7:41 I have the same problem with the my washer mostly sounds like halicopter during the spinning cycle, how much tight is it going to be to achieve good result? Thanks for sharing the idea
@dilshankhan76762 жыл бұрын
👌👌👌👌
@narenderverma42032 жыл бұрын
Nice information thanks a lot sir
@day_dreamer_dan2 жыл бұрын
Thank you so much sir. Each video takes a lot of efforts to create. Would appreciate if you could subscribe to my channel, thanks.
@adrianmejia300011 ай бұрын
Mucha retórica eso es para técnicos. No.para otras personas. Los dueños.de.lavadoras no saben esto se manualidades o.sea mecanica de banco. Manualidades?????
@pravinsolanki1083 Жыл бұрын
I have 7kg IFB top load and I want shoker to replace.. What is diff between company and local market...Have you give me the address for buying this.. Contact also please..
@johns60328 ай бұрын
When it's banging top load can it be the shock absorbers?
@wrbwn Жыл бұрын
Good video. Very informative. Thank you.
@day_dreamer_dan Жыл бұрын
You're welcome, don't forget to subscribe.
@warwar4876 Жыл бұрын
Thanks a lot for your sharing.
@day_dreamer_dan Жыл бұрын
You're welcome, don't forget to subscribe
@MANOJKUMAR-it2np3 жыл бұрын
Bhai lg wahing machine spian start hote he water le lene lgti h kya problem h
@day_dreamer_dan3 жыл бұрын
Logic board me problem ho sakti hai ya fir water intake valve me. Valve me problem hoga toh tode saste me repair hoga. Logic board ka repair mahenga padega. 3k se zyada bole toh naya machine mena consider karo
@anilgarg94533 жыл бұрын
This is balance problem, when spin starts it hits the switch top back of machine, if balance is right, drum will not hit that switch
@unyukaksampan4 ай бұрын
Tq for the info fren
@day_dreamer_dan9 сағат бұрын
Your are welcome!!
@engineerIndia1213 жыл бұрын
Nicely described, Thank you.
@day_dreamer_dan3 жыл бұрын
You're welcome
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel, it will help me make more helpful videos
@notagain19523 жыл бұрын
OK, you can replace the parts but there is a secret that most dont know. That is that the tube is missing that would provide dampening. Friction is not a good dampening element because it changes and with wear, very little friction exists so it needs the external cylinder.
@day_dreamer_dan3 жыл бұрын
I agree with what you said. Frictional dampening is a short term solution. Its just another example of planned obsolescence. Makes me feel sad that millions of units like these will be discarded just because of this bad design. Imagine so many otherwise perfectly fine machines being decommissioned.
@HBO1984. Жыл бұрын
This dont work. I tried this and its still spinning violently. 😑
@day_dreamer_dan Жыл бұрын
At this point you can either replace the suspension rods with new ones or buy a new machine. Thank you for watching. Please do consider subscribing.
@timbrown4798 ай бұрын
Same here, new rods did nothing to help
@HBO1984.8 ай бұрын
@@timbrown479 We need to go back to old school mechanical timer Kenmore washers. Fuck the energy guide and environment. 😑
@lalitverma8130 Жыл бұрын
Hindi me bol
@20EUR20 Жыл бұрын
💚
@axd07033 жыл бұрын
Should I let this be a permanent solution?
@day_dreamer_dan3 жыл бұрын
No this won't last beyond 6 months after that u may have to do it again. Permanent solution is to get new dampner rods. It's available on Amazon for 1.5k rs.
@axd07033 жыл бұрын
Possessed🤣🤣
@day_dreamer_dan2 жыл бұрын
🤣🤣 Please do subscribe to my channel
@slntech3082 Жыл бұрын
Improve your audio quality and upload
@day_dreamer_dan Жыл бұрын
Thank you for your suggestion. Will look into this.
@anilgarg94533 жыл бұрын
Sir company use the sticky material on the spring rods to control the movement what is this material
@day_dreamer_dan3 жыл бұрын
It probably is just normal grease
@TheDonjovi3 жыл бұрын
Its not a regular grease,its sticky.i see it every where every store in my city and no body knowed.so i try to use Mouse Glue. And it works,but not permanent.
@heman61333 жыл бұрын
@@TheDonjovi whit thing that you are referring to is actually, glue to connect plastic pipes for leakage, it has nothing to do with rod suspension. You explanations is absolutely in correct.
@riazahmed55013 жыл бұрын
Please come to the point quickly avoid
@anirudhnair96932 жыл бұрын
Bro you can increase the playback speed man !
@ahmadsyahmi3512 жыл бұрын
very nice. i have exactly the same problem. im going to try this fix tomorrow. thank you so much for this sharing💐
@day_dreamer_dan2 жыл бұрын
Thank you so much for watching my video. Sure do try and let me know how it goes, would love know. Buying an entire new washing machine just because of one part never really made sense to me.
@ahmadsyahmi3512 жыл бұрын
@@day_dreamer_dan alright. brb. yeah, me too
@day_dreamer_dan2 жыл бұрын
Please do subscribe to my channel, it will help me make more helpful videos
@ahmadsyahmi3512 жыл бұрын
@@day_dreamer_dan turns out, bearing of the clutch gearbox was worn out. i just changed the bearings afterward.
@day_dreamer_dan2 жыл бұрын
@@ahmadsyahmi351 woah how did you spot the problem? How did you fix it?