How to fix a stuck rebound dial (DVO)

Hey folks,
If you had your rebound dial stuck after a service to your DVO diamond D1, here is what you can do to fix it. Essentially you remove the foot nut , take a 4mm hex key and rotate it clock wise as well as counter clock wise to free it . You wil hear some clicks and it’s ok. You will eventually get it unstuck. All the best
Disclaimer ; I am not responsible if yours break.

[@ka81alex]

but what's the reason? what is actually going on there inside?

[@Zenpedaler]

Hello, Based on what I have read/seen if you use a general socket ( which I did) during seal maintenance, you could while tightening the nut also keep rotating the rebound knob( as it sits right over the nut) causing it to get stuck. I will probably use a wrench next time and not a socket to avoid this. DVO tech was not surprised when I mentioned this. May be a common thing !!.