HOW TO FIX AIRMATIC AIR SUSPENSION | MERCEDES-BENZ Airmatic Replacement | S Class W220 | VERY EASY

[@GarageDynamics]

Tell me how your suspension replacement went in the comments down below. I'd love to hear all about it and answer any questions you might have. Feel free to leave a tip 😊💲VENMO: @GarageDynamics

[@freedomfighter-jr4xv]

Can rear suspension level adjusters go bad on S430 Mercedes

[@freedomfighter-jr4xv]

Right side rear is higher than the left side rear

[@GarageDynamics]

@@freedomfighter-jr4xv You might be able to recalibrate them with a AUTEL scan tool

[@GarageDynamics]

@@freedomfighter-jr4xv Try pressing the sport suspension button twice on your center dash. If that doesn't work, you can pull out the air suspension relay and then put it back in. If that still doesn't work then try re-calibrating the suspension with a AUTEL scan tool.

[@LDD1701]

Thanks!

[@Eldermtaylor]

I’m interested in the exhaust system.

[@GarageDynamics]

Hi Eldermtaylor! Thank you for reaching out. I sold out of my exhaust systems and right now there is a 2 to 3 month lead time. If this is ok with you then please email me and we can discuss further details. I'm looking forward to speaking with you soon. Cheers!

[@davejohnson3860]

Awesome video..One question @ 8:15 no brass fitting replacement was used. Should it be reapplied. Thanks

[@isakakfi01]

Thanks for all your hard work and contribution to DIY'ers community.

[@GarageDynamics]

It's my pleasure @a.a2721! Thanks for the kind words 😊

[@FIYAMAN32]

I must say, Glad I found your channel. Very thorough and very easy and simple explanations. I have an 07’ S550 and definitely don’t mind getting my hands dirty to maintain the longevity of a great car. Your passion and expertise is much appreciated. Godspeed!

[@JCKICKS213]

How did you get the bolts out from the lower arm I’m trying it out with the jack by lifting and lowering it like you did but there not coming out 😢

[@JCKICKS213]

That was super easy bro thank you

[@frankki1]

Do you need to release pressure form system somehow when you change those struts?

[@Pablo.Coppola]

Great video! You definitely have the DIY skill down!

[@GarageDynamics]

Thanks Pablo! I appreciate your support and kind words 🙏

[@idahodiy]

Another awesome repair video. I love my w220 and hope to keep it on the road for decades to come.

[@GarageDynamics]

I feel you @idahodiy. It's such a great car.

[@amzmanku]

Great videos man, I'm so glad you have the same vehicle as me. Now it's time you also get a W221 S63, :D

[@GarageDynamics]

Thank you amzmanku! It's a great car! Haha! Yeah, I think it's time to upgrade too 😂

[@robwest1331]

Thanks bro 👍

[@luisassisgoncalves4280]

Does this erases completely the issue or will it come back again? Thank you bro! I have a w219 and having issues with airmatic

[@Magnacardia]

Anyone know how to fix a locked compressor

[@UNKNOWN2009]

Not torqued under load?

[@GarageDynamics]

Hello @UNKNOWN2009, That's a very good question and thanks for asking. I didn't see anything in the service notes about torquing the bolts under load. I hope this helps. Cheers!

[@chrisparker8539]

I like easy peasy Japanesey.

[@GarageDynamics]

Me too lol! 😂

[@abd19946]

Does it need any calibration or programming to make air suspension work again ?

[@alexmontanamc]

Is there a way to lower these manually? I’ve got an s430 and the rear is blown out, I’m eventually going to replace the full air ride with coilovers, but wanted to see if for now there’s a way to level it out so my project car doesn’t look like a dog dragging its but on carpet 😅

[@sinybinl1840]

Yes you can my car was the same way my rear sat lower then my front so I unbolted the airlines on the front shocks to let them leak down just far down enough to match the ride height in the back it isn’t hard to do either just pop your front hood open and you have easy access

[@topsensei7472]

Do i need new rear air struts if I ordered the air bags or all I need is the air bags?

[@9691ark]

I love your videos on the w220 chassis. You've helped me more than once. One of the best on KZbin. Very concise and thorough. Excellent step by step instructions. Thank you and have a fantastic day. 👍🏼💪🏼

[@lifeofholy]

👊

[@alexmontanamc]

Basically asking for the front end

[@major_profitsmajor_profits7581]

Right