How To Fix AIR Suspension | MERCEDES-BENZ Rear Airmatic Replacement | S Class S500 W220 | VERY EASY

#Mercedesbenz #airsuspension #Arnottindustries
Have you gotten an Airmatic warning light on your Mercedes Dash? Do you hear air leaking from your Air Suspension? Does one side of your Mercedes s class air suspension sit lower to the ground? If you have answered yes to most of these questions then you probably need to change your air suspension strut. The good news is that it's very easy to do and this video will explain how to replace your Mercedes Benz s class air suspension (airmatic / strut). Another good thing is that the rear air suspension is A LOT EASIER to replace than the front suspension. This video can be used as a reference for other Mercedes Benz vehicles such as the CL 550, S550, CLS 550 and other Mercedes that uses Airmatic suspension.
I highly recommend replacing your Mercedes Benz air suspension (air strut/airmatic) with an Arnott industries AS-2605 (without 4matic) air strut for your Mercedes Benz S Class. Arnott makes a very high quality air suspension (strut) that's built to last!
🛒 Amazon
Tools Needed:
▶Arnott AS-2884 Rear Air Strut: amzn.to/45P5D9l
▶Arnott Strut (Air Suspension) : amzn.to/2G9F84k
▶Arnott AS-2605 Front Air Strut: amzn.to/3xRIfKw
▶Autel Scanner MaxiCOM MK808BT OBD2 Scan Tool: amzn.to/31N7SfR
▶Nylon Auto Trim Removal Tool Kit: amzn.to/3FwcpWu
▶1/2 inch ratchet: amzn.to/2AwUKAe
▶3/8 inch ratchet: amzn.to/2VRC065
▶3/8 inch torque wrench: amzn.to/2BwircB
▶Craftsman 20-150 ft lbs 1/2" Drive Torque Wrench: amzn.to/3gva7sl
▶3/8 inch 13mm socket: amzn.to/3f3vsc4
▶Torx Bit Socket Set Star T6 - T60: amzn.to/40dUnln
14-Piece E-TORX Socket Set: amzn.to/3FylE8N
▶E10 torx bit: amzn.to/38tJz85
▶5mm hex bit: amzn.to/2Z4plPg
▶4mm hex bit (T Handle) or Allen Key: amzn.to/38x9Zpf
▶1/2 inch 17mm deep socket: amzn.to/3e04GA4
▶3/8 inch 17mm socket: amzn.to/3dXLRNH
▶10mm open end wrench: amzn.to/2YZFt4r
▶Short flat head screwdriver: amzn.to/38tCbcE
▶Long flat head screwdriver: amzn.to/2ZE7HAR
▶LOCTITE 243 Threadlocker: amzn.to/40aWgzw
▶Tri-Flow: amzn.to/38t33cO
▶Ball joint separator: amzn.to/2CbV8Vu
▶40" Creeper with Magnet Trays: amzn.to/3AR2CbO
▶Microfiber Cleaning Cloths: amzn.to/3ijoyWE
▶Mechanic Stool with Tool Tray: amzn.to/3ASbC0a
▶Powder Free Examination Black Nitrile Gloves: amzn.to/3tOGKx8
▶HYFLEX 11-600 Light Duty Nylon Industrial Gloves: amzn.to/3VeUYAe
▶3-Ton Quick Rise Aluminum Floor Jack: amzn.to/3H8IOEX
▶Jack Stands, 3 Ton Capacity: amzn.to/3GOsTev
🎦Video Equipment Used For Videos
▶Main Camera: amzn.to/3XPXiz6
▶GoPro: amzn.to/3XJXgsG
▶Wireless Microphone: amzn.to/3H1bBLu
▶Microphone (Voice Over): amzn.to/3UgMdnS
▶Camera Microphone: amzn.to/3irXaG2
▶Dead Cat: amzn.to/3OSfLXJ
▶Tripod: amzn.to/3AZlqWn
▶C Stand: amzn.to/3GYgcOv
▶Lights: amzn.to/3UrPalA
▶Light Stand: amzn.to/3in5c2R
▶12-60MM Lens: amzn.to/3VLjSHo
▶Macro Lens: amzn.to/3vbZxOn
I get partial payment if you purchase from this link. Thanks for your support!
Ansia Orchestra - Close To Flame [Epic][No Copyright Music]
/ @mfy2655
Music provided by: MFY - No Copyright

[@GarageDynamics]

Hey everyone! I'm back with another suspension video. If your rear suspension has blow out then this video will help. Also if you would like to donate to the channel, check the link in the description. You can also donate by hitting the "Thanks" button under this video. If you're interested in purchasing an exhaust like the one you see in this video then visit my ebay store here: www.ebay.com/itm/276110383179 Tell me how your suspension replacement went in the comments down below. I'd love to hear all about it and answer any questions you might have. Please be sure to hit that like button if this video has helped you in any way. Thanks!

[@freedomfighter-jr4xv]

Can rear suspension level adjusters go bad on S430 Mercedes

[@freedomfighter-jr4xv]

Right side rear is higher than the left side rear

[@9691ark]

I love your videos on the w220 chassis. You've helped me more than once. One of the best on KZbin. Very concise and thorough. Excellent step by step instructions. Thank you and have a fantastic day. 👍🏼💪🏼

[@FIYAMAN32]

I must say, Glad I found your channel. Very thorough and very easy and simple explanations. I have an 07’ S550 and definitely don’t mind getting my hands dirty to maintain the longevity of a great car. Your passion and expertise is much appreciated. Godspeed!

[@isakakfi01]

Thanks for all your hard work and contribution to DIY'ers community.

[@GarageDynamics]

It's my pleasure @a.a2721! Thanks for the kind words 😊

[@idahodiy]

Another awesome repair video. I love my w220 and hope to keep it on the road for decades to come.

[@GarageDynamics]

I feel you @idahodiy. It's such a great car.

[@pablocoppola5397]

Great video! You definitely have the DIY skill down!

[@GarageDynamics]

Thanks Pablo! I appreciate your support and kind words 🙏

[@robwest1331]

Thanks bro 👍

[@amzmanku]

Great videos man, I'm so glad you have the same vehicle as me. Now it's time you also get a W221 S63, :D

[@GarageDynamics]

Thank you amzmanku! It's a great car! Haha! Yeah, I think it's time to upgrade too 😂

[@davejohnson3860]

Awesome video..One question @ 8:15 no brass fitting replacement was used. Should it be reapplied. Thanks

[@abdulrahmanalhably2005]

Does it need any calibration or programming to make air suspension work again ?

[@topsensei7472]

Do i need new rear air struts if I ordered the air bags or all I need is the air bags?

[@luisassisgoncalves4280]

Does this erases completely the issue or will it come back again? Thank you bro! I have a w219 and having issues with airmatic

[@alexmontanamc]

Is there a way to lower these manually? I’ve got an s430 and the rear is blown out, I’m eventually going to replace the full air ride with coilovers, but wanted to see if for now there’s a way to level it out so my project car doesn’t look like a dog dragging its but on carpet 😅

[@sinybinl1840]

Yes you can my car was the same way my rear sat lower then my front so I unbolted the airlines on the front shocks to let them leak down just far down enough to match the ride height in the back it isn’t hard to do either just pop your front hood open and you have easy access

[@chrisparker8539]

I like easy peasy Japanesey.

[@GarageDynamics]

Me too lol! 😂

[@alexmontanamc]

Basically asking for the front end

[@UNKNOWN2009]

Not torqued under load?

[@GarageDynamics]

Hello @UNKNOWN2009, That's a very good question and thanks for asking. I didn't see anything in the service notes about torquing the bolts under load. I hope this helps. Cheers!