Also just spend about 4 hours from others videos. But you are the only one who says not to do it with a battery. F&%KING THANK YOU
@Benchpressr3 жыл бұрын
That was the best tech Tutorial I’ve ever seen, easiest to listen to and learn
@TahoeSteve3 жыл бұрын
Glad it was helpful!
@skyflow_kreative_imaging3 жыл бұрын
Oh my gosh man I've been trying for hours to fix a controller that would not turn on. I was doing firmware upgrade, following videos online where you put in bootloader mode to do it. But then my controller stopped turning on. I was like wtf and spent 3 hours finding answers. Came across your video and it worked. So nuts that it worked because all the other videos are showing the firmware upgrades while the tx is powered on with a battery. BUT YOUR VIDEO WORKED MAN!!!!!!!!!!!!!!!!!!!!! How can I ever thank you? You just earned a subscriber, that's for sure. SERIOUSLY THANK YOU SO MUCH!!!!
@TahoeSteve3 жыл бұрын
It is comments like these that keep me motivated to keep making videos. I appreciate you taking the time. You can support me by telling everybody about my videos on social media and if you really want I have a Patreon account. Thank you.
@gattenmattie30804 жыл бұрын
The computer doesn't see the taranis😢
@carbonbird28804 жыл бұрын
My taranis is not recognized from the computer when I plug the USB in?!
@pepper10santos8 ай бұрын
run impulse rc fixer
@brady19292 жыл бұрын
I spent 6 hours trying to update my firmware on my Qx7. Then I bricked it. Thank you so much. I fixed it in about 10 minutes.
@rogelmarisese29392 жыл бұрын
Your video is a lifesaver! Very easy to understand and follow. Kudos!
@slimjim39214 жыл бұрын
Sir, Thank you!!! I am breathing once again. Seems I left my Taranis plugged into the computer when the battery died. Followed your flashing instructions and voila! My models are still there too!!! thanks!!!
@TahoeSteve4 жыл бұрын
Glad I could help!
@Akolakua4 жыл бұрын
My Taranis qx7 now is working. Thank you!!!!!
@TahoeSteve4 жыл бұрын
Glad to help
@pepper10santos8 ай бұрын
yeah steve mine still doesn't work. says new firmware not compatible. now what?
@mrp3pper21Ай бұрын
did you find a rix yet
@shogunemperor3 жыл бұрын
Good video bruh!! Love that last bit.. "breathe... breathe... breathe... " ROFL
@TahoeSteve3 жыл бұрын
Glad you enjoyed
@jeremykoerber2 ай бұрын
Fucking lifesaver in 2024 with a 2019 X9D+. FREAKING OUT. Breathing now.
@FranciscoRivera-qw8qw4 жыл бұрын
I love you bro those breathing techniques really helped out😭
@TahoeSteve4 жыл бұрын
Glad it helped
@canaldrone21 Жыл бұрын
Muito obrigado, já estava comprando outro rádio quando vi seu vídeo, e voltou a funcionar perfeitamente
@bachkawrd2 жыл бұрын
THANK YOU SO MUCH! It worked perfectly, you earned my subscription and like, keep up the good work man!
@overratedsrtchallenger4 жыл бұрын
Bro you just saved my ass 🙏 thank you so much
@TahoeSteve4 жыл бұрын
So glad to hear that. Glad it helped!
@redriot21734 жыл бұрын
Hey steve, i have the same problem in the video however it says the radio isnt connected to the computer, so i cant write the firmware to the TX
@TahoeSteve4 жыл бұрын
Did you remove the battery?
@redriot21734 жыл бұрын
@@TahoeSteve yeop
@TahoeSteve4 жыл бұрын
I will do some digging. At what point exactly do you get the error?
@MrAndromedean4 жыл бұрын
@@redriot2173 what did you do to fix it? must be fixed, you didnt come back
@redriot21734 жыл бұрын
@@MrAndromedean Yeah I fixed it, I had to entirely reset it along with some other stuff. Changed the code, Had to do some other bits and bobs but I got there in the end.
@robinsonacosta21124 жыл бұрын
I followed all the steps however my taranis qx7 either: 1. turns on, and will never turn off. or 2. doesn't turn on back again
@eddiepfund3 жыл бұрын
You ever figure this out? Mine did the exact same thing, and can't fix it.
@reyreyna35553 жыл бұрын
My tranais x9 lite been put away for about a month ... powered on to check battery and it was 7.1v so i powered back off to put fully charged battery.. now it wont power back on ... put the 7.1v batterys back in still wont... do you think its bricked?
@captainkook93713 жыл бұрын
Thank You. You just saved my radio.
@TahoeSteve3 жыл бұрын
Excellent
@dronesetc97693 жыл бұрын
On a customers X9D that will not show up in aurdopilot as connected , I tried flashing and it looked bricked, would only light up in "boot loader mode" flashed the back up to it and it works again. I still need to update it, wish i knew how to tell which X9D it is? SE , Plus or Plus 2019. I tr5ied with no battery and companion errored about USB device not found (ie no power to remote per this video, did I miss something ?)
@MeHmEtYLdIrAn2 ай бұрын
aynı sorun bende de var çözdüyseniz bana da söylermisiniz
@alexnadin87684 жыл бұрын
Thank you!! You save my Taranis!!
@TahoeSteve4 жыл бұрын
Awesome 👌
@parzi73342 жыл бұрын
This didn't work for me I have a qx7 please 🙏🏻 help me
@MrAndromedean4 жыл бұрын
"could not check firmware from radio" wish this worked but we are effed up here a lot more than your bricked controller.
@Mnmn-xi6cj2 жыл бұрын
Same issue, did you ever solve it?
@xFlowXxX Жыл бұрын
@@Mnmn-xi6cj you have to use Zadig to re install the STM32 driver
@awangbayunugroho5223 жыл бұрын
Same problem with my taranis x9 lite, I tried flash, but the radios still same. Any idea sir?
@SpFabiomt Жыл бұрын
Hey did you ever get a solution on this? Having the same problem with mine
@nickmarangelis22514 жыл бұрын
Is this the same with the x9d plus se 2019 ?
@TahoeSteve4 жыл бұрын
I dont have one, but it should.
@ez-ee3 жыл бұрын
You are the best.Thank you!
@christianeisner35903 жыл бұрын
haha, i like it ;-) "BREATHING AGAIN"
@TahoeSteve3 жыл бұрын
Glad to help
@RC-Heli8353 жыл бұрын
This is better than the way I unbricked mine!😀
@hoagietime12 жыл бұрын
not going to lie, I was kinda hoping this wouldn't work so I'd have a good excuse to upgrade from my old QX7. Guess I'll have money to buy my kid a x-mas presents after all. thanks
@bretsheffer82633 жыл бұрын
Sad to report, this trick didn't work for me. Apparently the pc not recognizing firmware on Tx.
@jacksonwazny2 жыл бұрын
My pc will not recognize the radio in bootloader mode... Any ideas?
@Mnmn-xi6cj2 жыл бұрын
I have the same problem. Did you ever fix it?
@zuqafpv Жыл бұрын
Please help me guys same issue but it doesnt work for me
@Alex_hlden2 жыл бұрын
Life. Saver.
@fpvfritz4 жыл бұрын
this got mine to get to the audio start up screen, but no backlight and nothing else. i'm not breathing!
@TahoeSteve4 жыл бұрын
If you try again while connected to the computer will it let you try a firmware update the normal way?
@fpvfritz4 жыл бұрын
@@TahoeSteve yes, you mean through the open TX companion? it gives me this error File downloaded successfully No valid DFU suffix signature Warning: File has no DFU suffix
@briancox99604 жыл бұрын
Hey Steve, I have this very problem but when I click write firmware, it gives me a message that it isn’t compatible with the software on the Taranis
@TahoeSteve4 жыл бұрын
It could be that your taranis software is 2.2.x. if so, start over and flash a 2.2.x firmware and see if it works.
@briancox99604 жыл бұрын
Tahoe Steve thanks, I’ll give that a shot.
@jamz23484 жыл бұрын
Hey have the same problem but I'm very new at this. How do I flash that firmware? I'm really stuck here
@briancox99604 жыл бұрын
@@jamz2348I’m also very new at this and I never got mine fixed. It’s a paperweight that still won’t turn on. I’m trying to find a local shop that can fix it.
@skyflow_kreative_imaging3 жыл бұрын
@@briancox9960 - You ever get it figured out? I have a controller that suddenly wont power on after trying to update to OpenTx 2.3.11
@Tuvasom_fpv2 жыл бұрын
Thank you!!
@Punisher973 жыл бұрын
I LOVE YOU !!!
@truthplease984 жыл бұрын
Thank you Sir
@TahoeSteve4 жыл бұрын
Most welcome
@KhenZ4 жыл бұрын
Life Savior!
@TahoeSteve4 жыл бұрын
Glad to hear it!
@PP-97803 ай бұрын
Awesome!
@GuilhermeSantos-mt3mq3 жыл бұрын
saved my savings hahaha
@lanegrippy10544 жыл бұрын
this did not work, but anyways, got it to work,, do not ask how,, something of this and that,, wow