Taranis X9D: How To Completely Reset (when its FUBAR)

[@freedomflyer4582]

Rip brother .. I always come back to your videos

[@ryanluis5648]

wow exactly 4 years ago and this is what I needed

[@dylanzacher3474]

You have helped me a lot, thankyou for your time and effort.

[@MrStreetboy80]

This is useful, just got a used one of these with models still loaded on it, I wanna reset and start a fresh.

[@gwizzfpv6741]

your still helping me ,god bless you x

[@robertlucas5717]

Hello, I have a new x9d+ and want to use S6r receiver. I have a bind and S6r is working in auto level mode. I can't change to gyro or off mode. Firmware is frsky 2.1.6.

[@saquanfields355]

so I erased all the folders on the SD card by accident and now I can't put back the images or sounds on the SD card. can you help?

[@zanderschannel6416]

HELP i have a Taranis x9d plus and none of the switches are coming up like i cant even set them to channels or anything i can have them done when i turn it on and i dont get a warning someone please help i have tried what you did and it didnt change anything

[@MrSabram07]

Bought an X7 that came with my Arris x220, I assume it was pre-bound. I also got a tiny hawk too without a controller. So when they arrived I decided to skip the x220 and try to bind the tiny hawk two freestyle. Long story short I think I deleted the X2 20 and now I have control over either one, please help me

[@vyoufinder]

Do you know a way to reset the Taranis X9D+ to factory defaults? I have been trying: 1. Remove and format the micro sd card from the Transmitter. 2. turn on and browse to "Reset to factory defaults" 3. Take apart the transmitter and remove the CR1220 lithium battery ..Still, not factory defaults. As soon as I turn it on, there's my splash screen - still there. I've tried this 4 times now, each time in different order. Nothing will reset it. Is ther esome sort of internal jumper to do it? Or a memory chip I need to replace? I'd rather keep my x9d than buy a new one.

[@Emzy-87]

Project Blue, I can not seem to get my Taranis to show up as a controller, only as a mass storage device. I have tried changing drivers, and using defuser to remove DFU mode. Any tips?

[@csz8220]

Will this also reset any settings I've might have made on the Taranis? For som reason I can bind to my X4R but it shows no stick response in KISS GUI and I can't arm the darn thing..

[@nicnok95]

so what do you do if three finger solute does nothing

[@almitchell6012]

Still helping me out Bruh, RIP

[@recon_fpv]

These feels won't go away. RIP

[@MrJacntan]

he has passed? i have gotten alot of help from him.. Dont even know his name!!!! what a huge loss! my condolences to his family! he still has many people who hw is helping! Rest in Peace! ONE LOVE

[@raeme105]

G'Day mate having a bit of a problem with the tranis keep getting error msg no bit maps on sd card but the files are bmp ?

[@TheTigersuper6]

Hi Believe it or not only got my Taranis today followed your video's in sequence all good,then when trying to load a new model gone pear shaped. Instead of giving me picture option of model i get Script syntax error wizard.lug:72 attempt to call field 'lock'(a nil value) Gutted as have not even connected my first drone Thanks in advance for any advise Nick

[@mrmidnight32]

Mine wont even pop up or connect to windows. Weather i plug it in or not it doesnt register in windows. No one goes over how to connect it to my PC. I feel like I need a driver.

[@saquanfields355]

I did everything you said from this video and I get this message item not found... this is no longer located in the file I created to download the website

[@ProjectBlueFalcon]

Whenever you unpacked the download did you tell it to unpack it into the same folder? Because sometimes it unpacks it and places it into a different folder.

[@wezcrutchfield]

I just bought the Tara is xd9 had for a couple of weeks put on charge and now all it does is flash blue screen and emit clicks is there a simple fault to fix before I send it back, thx, wez

[@franklinmellott2319]

Mine is brand new. When hold two trims to center and turn on as shown, screen comes on but blank. Shutting off power does nothing. Can only shut off by pulling battery.

[@maddogharper01]

I think I may have broken my taranis, I tried to update the firmware by deleting a load of files and drag dropping the new ones over now my controller won't connect to my computer!!! Please help.

[@tylermetternick3438]

I still have the vibration with no screen, I deleted all the files and tried this but it didn't work. The reason this happened because I was trying to update my firmware and somehow messed it up. Plz help

[@ProjectBlueFalcon]

When I was trying to lock mine up I got the same thing as well. No screen and constant vibration. I cant remember what I did to fix it but first, try holding in both the trim switches then powering it on, then choose restore EEPROM. You can see what I'm talking about in the firmware video. If that doesnt work then go to this web page, www.open-tx.org/downloads and download the open tx 2.0.20, and flash that version of firmware. I know open tx V2.1.9 is newer but I dont think that will unlock it yet. Do 2.0.20, after you get it unlocked then dowload the 2.1.9 and update firmware.

[@admargodoy]

Tyler Metternick solved?

[@billalvarez6699]

my bind function don't make beeping sound on bind mode..I remember it was working when I just got it. something I did?

[@rtcfpv1012]

I recently had the problem on my taranis qx7 when I installed the wrong firmware. My qx7 would show just plain white screen and vibrates until it turns off on its own after a while. I can hear the warning voice though for the switches. I tried reflashing with different versions but always failing and giving me error message " New firmware is not compatible with the one currently installed ". I fixed it by unchecking the box that says " Check Hardware compatibility " before flashing. Last thing to do is reset qx7 to factory. Now my Qx7 is alive again. :)

[@bernhard8540]

Frsky really needs to ship all radios with an SD card so it's not so confusing for newcomers that have never updated or messed with their radio.. I bought the x9d special edition plus 2019 model and even my $300 radio didn't come with an SD card and thats pretty crappy on frsky's part.. I have lost track of the amount of ppl I have had to help fix their radio because they tried updating the firmware and thought they bricked their brand new radios.. great job frsky...

[@MikeRub5001]

Using windows 7, When I use the three finger salute and connect to windows. I will not see the two drives in windows.

[@conradtaggart9959]

Still doing the business and helping people all around the Globe, including me, RIP

[@jakelim7673]

i can't connect to my pc at all! it was working well after i F up some thing during the process. Help needed!

[@FamiliaColl]

First of all greats tutorials keep it up, anyways quick question, did everything upgraded the firmware, bootlegger,... so on the control is working super fine, but now for some reason when creating a model the at the beginning when you see the for models picture for plane, heli, wing and quad the heli one is missing, like I said the x9d is working super fine not gonna use the heli one but just wondering, thanks bro and great content.

[@fauzulhakim9280]

project blue falcon passed away last year from a motorcycle accident...RIP

[@FamiliaColl]

@@fauzulhakim9280 thanks for letting me know, I'm so sorry to hear that, I found out couple of day after I wrote the mesaage.

[@MikeRub5001]

My Taranis plus is completely dead. I tried to upgrade the firmware. I can't get into bootloader mode?

[@joematarc5245]

hey dude, I accidentally format the sd card, and everything is gone. can you help me please?

[@SanchoGonzalezGreen]

Hi. Thanks for your video, it's cute! But after done everything, now all my receivers are not pairing with my Taranis Plus. (the day before were working ok) My receiver are D4R-II and X6R, X8R and X4R. After trying some other firmware, they don't go either. And finally try a DJT ext module and if the D4R-II receiver works. How can I bind it back again? Thanks in advance.

[@shaneintegra]

Unfortunately he passed away a few years back

[@martinmccurley9426]

I Had the vibrate and bright white screen,now I get the open tx splash screen and throttle and switch warnings,when I press any button to clear the warnings I only get a constant fast beeping.Any suggestions?

[@rittmaierbyron]

They won't answer you they never do they just make videos

[@jarettjohnson2721]

Not true. JC was always extremely helpful and the hobby lost a great ambassador when he passed.

[@hub7093]

ok this is what I did I went to betaflight and had my taranis 9+ hooked up I thought that I had to flash the firmware from that site onto my taranis when I did that the screen went black and no amout of flashing from opentx companion has been able to bring it back please help if you know how

[@Lasse_Rudolf]

You wont get a answer from him anymore dude. RIP

[@droneee3478]

Thank you so much for the videos. I got everything working just like you explained. It downloads through the computer, all sounds work but now it won't work with my simulator (Freerider) any suggestions?

[@chitung2277]

hi love your videos. I recently tried to flash the FW and bootloader and afterwards the Taranis X9D plus would not even power up. Have you come across this and have any idea how to fix the problem?

[@juandavidbarrada]

Hey man, sadly "Project Blue Falcon" cannot fix your problem or even answer you anymore since he passed away a few months ago (bike accident).

[@flyinghigh5031]

Still coming to this page for information.

[@MikeRub5001]

What if Your Taranis won't connect to windows 7? Also, you can't see the Two drive ? Please Help

[@jettechdonatkins]

I tried this and still no working tx.I had a good working x9d+,but had only used it to set-up a couple of mini skyhunters for some fpv flying.I had them all set-up using just the tx,but wanted to learn about Open TX.Somewhere in the process while trying to go to Bootloader mode,the tx just starting vibrating and the screen instead of blue was gray with nothing on it,just the gray snow.I thought I didn't have tx connected to laptop while trying to enter bootloader,but now I'm not really sure,they may have been connected.Now after trying this method,which I already tried,but tried again,my tx won't do anything when switched on,acts like no battery is in it.I tried a different battery and a different sd card and still nothing.Who works on the x9d+ in the US,anyone,or should I look for another tx?Love your vids,they are easy to understand for me.Thanks!

[@Nubyrc]

My Taranis will not go into bootloader by pressing the buttons in and turning it on at the same time, so I went to old school stuff. I burnt new firmware and now its bricked!

[@peterweber79]

i installed once excitedly a noplus firmware on my x9d plus -> no screen, feedback motor going wild.

[@MotorDext]

Mines wont load into bootloader

[@sammymallow1742]

THANK YOU I LITERALLY THOUGHT I HAD BROKE MY TX

[@MrArby1]

Thanks man

[@Nubyrc]

Dude your radio works how is this helping?

[@brian_zx6r]

This dude helps a lot beyond the grave, show some respect bruh

[@consciousmeandu]

thank you so much :)

[@rittmaierbyron]

Minds all brand new and I screwed up and I tried everything you said to do and mind still screw it up it just will not work I'm thinking about trashing it. Not even you could fix it.

[@juandavidbarrada]

Hey man, sadly "Project Blue Falcon" cannot fix your problem or even answer you anymore since he passed away a few months ago (bike accident). But I'm sure he would fix it...

[@cecomeco8868]

Hello ,possible connect TARANIS X9D with DEVICT AUTOPILOT g2.0 www.devict.com/sonar-fish-finder.html i tried to connect it many times but without any success.it is possible the rc.telemetry taranis x9d work with DEVICT AUTOPILOT g2.0

[@SaltyFarm]

Still relevant

[@amhfpv]

:(💔 RIP

[@JamesManimal]

RIP