How To Fix An Outboard That Is Hard To Start

If your outboard motor doesn’t start on the first or second pull, then it needs a little tweaking. This engine works great once it starts but it takes too many pulls to get it started. Anything past 4 pulls is unacceptable.
In this video, I am running a Nissan outboard motor that is manufactured by Tohatsu, Japan’s oldest outboard manufacturer. Tohatsu produces high quality and extremely durable outboard motors.
Have you done your annual tune up? Every year before you take your outboard out, you need to check all the basics including carburetor adjustments, choke, idle, spark plugs, fresh fuel, etc. Stay tuned for more outboard repair videos.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for micro drill bits ➜ amzn.to/31lm8Jm
For more videos like this, check out:
👉Garage Sale Antique Outboard - Will It Start? ➜ • Garage Sale Antique Ou...
👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ • CORRECT WAY To Adjust ...
👉Proper Way To Tip A Lawn Mower Over ➜ • Proper Way To Tip A La...
🔧WELCOME to the Steve’s Small Engine Saloon KZbin channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmall...
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmal...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #outboard #outboardengine #outboardmotor #outboards #nissan

[@StevesSmallEngineSaloon]

✅Click here for micro drill bits ➜ amzn.to/31lm8Jm For more videos like this, check out: 👉Garage Sale Antique Outboard - Will It Start? ➜ kzbin.info/www/bejne/jZnHenxplriiZtk 👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ kzbin.info/www/bejne/g2e3Zn2lfL2Wfrs 👉Proper Way To Tip A Lawn Mower Over ➜ kzbin.info/www/bejne/m5aoh5ydqLukqKc You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

[@johnsommi6716]

Steve's Small Engine Saloon Hey quick question. I’ve been working on a 1989 Mercury 2.2 and am having trouble. I have cleaned every aspect of it including the carburetor. Each time I take the carburetor apart and put it back on, the engine will run beautifully for about 30 mins then will randomly shut off and not start again. Then, when I take the carburetor apart and put it back on same thing happens. Any suggestions as to why it stops working after a while and needs to have the carburetor played with each time?

[@bradb3651]

I respect any man who measures time in beers! Thanks for the videos. I own a few small engines that I can fix now

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@DANIEL2423able]

@@StevesSmallEngineSaloon Hi Steve I have a 1989 20 hp long shaft outboard Johnson motor runs great but it takes 2 men and a boy to pull the cord . Is there any thing I can do to make it pull over easer ?

[@johndallis9901]

@@DANIEL2423able oil down the plug hole

[@bumblbesss]

Ya know , The best thing about fixing a small engine is the "Adrenalin" felling you get before you pull that rope. And then it starts!!!!!!!! such great satisfaction. Awesome video Steve

[@StevesSmallEngineSaloon]

Thank You...

[@lanajantz2240]

Yeah, man!

[@thinkingimpaired5663]

I did that yesterday starting my pony motor on my cat d4. One pull start while the past two weeks I needed to use the 12 volt electric start motor for the pony.

[@dannymotovlogs4254]

bumbl besss agreed

[@fredkaminski6138]

If your out in the ocean with one of those things, you have bigger problems!

[@OtterLakeFlutes]

probably knows how to stay safe better than you in a million dollar yacht

[@RudyNortz]

Well, that chain saw at the beginning of every video you make starts by the 4th pull every time so there's that.....

[@jackmatney9088]

I don't have any micro drill bits ,I do have Acetylene torch tip cleaners work well/ Just sayin

[@StevesSmallEngineSaloon]

Right on Jack...

[@larrysmall3521]

I use piano wire from my local hobby shop. I only need 1 size for the carbs I have.

[@thinkingimpaired5663]

I like the acetylene torch tip cleaners myself because there isn't any sharp steel cleaning rods out on brass main jet.

[@scottfirman]

I have used electrical wire strands in a pinch. Whatever punches through that jet!

[@patrickamcguire8749]

I use them also, but sometimes I need a smaller gauge wire and pull one from my wire brush.

[@hermanmurphy4899]

Steve, great job on the outboard. I am having problems with my Bolen weed wacker. Ran last week, this week nothing. The coil and plug are firing great. Since a 110 weed wacker runs about $10-15 bucks, would you suggest replacement or repair of the carburetor?

[@hermanmurphy4899]

Thanks

[@searider9922]

If you want to avoid collecting fuel debris, garbage, whatever inside any carb you should run carb dry before motor is stored, can do so while motor is being flushed with fresh water after use. If you count with a healthy motor running strong and want to turn it ON on second pull try this starting procedure : Open tank's air valve, prime fuel bulb with arrow pointing upwards till firm, place the throttle grip to the staring position, pull kill cord off from its switch, make 2 hard pulls, move throttle grip back to min resting position, install kill cord on switch, pull hard once, motor should start right up. Check if works for you...

[@dozamm]

I have Suzuki 2.5hp outboard portable. It was not started on its 4th trip on a 10.5 ft inflatable boat. Every time it started max 2-3 pull. It was traveled the wrong side up and the fuel switch was on. Not sounded once after maybe 100 pulls. What may be the problem and how can I fix it by myself? I am a first-time user and I am, skeptical to open carb whether I will return all parts of carb in the right way. May I get help from you?

[@petemoore8923]

Love your videos! I’ve messed with a few carbs the last couple months and learned a few lessons on my own and from you. The biggest lesson is don’t be afraid to take a carb off! For YEARS I didn’t do it because I thought it would magically be thrown out of adjustment. Troubleshoot down to a carb issue. TAKE IT OFF! CLEAN IT!

[@GlobalDesignHD]

My issue is I need new gaskets probably

[@ihus9950]

Steve, nice job quick fix👍 But Please don't take that out in the ocean.

[@Hoffmanpack]

8 pulls !!! I go fifty on my 70's Yamaha

[@cchvac4919]

R H 12 or 13 on my 74 evinrude

[@TheOutBoardSurgeon]

Try starting fluid or new plugs or carb cleaning all super easy and usually fix it also could be the gas would be a good idea to check that

[@edwardcave1947]

Well done, I’m puttering with a Johnson 9.9 hp 1968 that’s hard to pull start

[@curtchase3730]

Love your vids! I have that exact same engine! Yes, it usually starts by 2nd pull when properly prepped up by pumping bulb up, full choke and and all that. Being a one lung, it is a noisey rattle trap, but it is reliable. Also, if you don't expect to use motor for a few weeks or longer, disconnect fuel hose and run until it dies out. Choke it and start again till it dies. I've never had my carb off yet.

[@bocabretts123]

I have a 2002 NSF5A but it's a 5 hp. Basically same thing. I just resurrected it after its sat idle for about 12 years. Thats a really good tip. Do you recommend anything specific for getting this thing back into and useable condition?

[@augusttornquist1733]

I have a 6 hp 4 stroke mercury. It is the complete same engine and it is noisy as shit and shakes a lot but it is dependeble as hell and just keep going day long 👌

[@GmGarlo]

NICE, My 9.9 evinrude takes about 9 pulls, but once its running , first pull everytime. my question is , if you cleaned the carb and its still hard to start what other things should you check. GREAT STUFF

[@trekstrains]

Hi Steve I’ve got a Honda Four Stroke 20hp outboard that will only cold start with the help of spraying some kind of assistance in the carb (starting fluid, carb cleaner, gas, etc) after it’s warm it starts first pull every time. Carb has been cleaned, spark plugs are brand new, new gas, I’m out of guesses as to what it could be. Any suggestions are appreciated. Thanks for informing us about all the things you have uploaded to KZbin I often watch your videos for help.

[@diane2193]

I soaked my carb in Tennesee moonshine overnite.Started first pull.

[@johnleach7879]

I love it, but I guess the 'shine is then undrinkable. Or maybe it was in the first place?

[@robertb7254]

Steve: I have the 2005 Tohatsu 6 4 Stroke …had always started then began to act up and stranded me…. I did a compression test and got 58…..I added oil to the spark plug hole and retested and got 110…..I’ve never pulled a head and replaced rings before and was hoping to find someone to guide me……valves appear okay but I haven’t put my feeler gauge on them yet

[@takingoutthetrash1512]

Dear steve, specifically i have a 1994 johnson 3 cylinder carburetor 2 stroke.. bought it and it ran like a champ, but sat it for 2 months and took it back out and it will start but run like shit. Struggle to run and run sluggish and if i open throttle wide open it will cut off... people tell me i need to clean carbs. Is that the case?

[@jamiegilbert4612]

Hi there iv just picked up a little TAS 1hp 2 stroke. Really old but in good condition. Was running before I picked up. Had a long journey in the back of the van. 4hours lol. But iv not been able to start it so I'm guessing the van ride has dislodged some old gunk. It's got compression and a spark so fuel gota be blocked??

[@renegademind1833]

How about 100 pulls = 2 stroke .. why? old Evinrude 9.5 hp

[@gemale]

Hi Steve. I did clean carburetor , fresh gas , change gear oil and engine oil. New spark plug but no luck. Pls help and advise. Thanks

[@gardenfork]

Love it when it all works the first time Steve, enjoy the surf. -Eric.

[@StevesSmallEngineSaloon]

Thank You...

[@ames477]

enjoyed the video - but... I've always heard that pushing a metal pick (drill bit) through a jet is a bad idea as it can change the diameter of the hole. are there any soft brush type tools to use?

[@scottfirman]

I find my own stuff gets neglected because I am so busy working on other peoples stuff. The last 3 years I have used other peoples mowers to mow my lawn than my own because I want to make sure theirs is all set to go. Same with snow blowing. I guess its a perk huh?

[@joegilbert693]

I ran a 6hp Nissan for years and it was bulletproof. I switched to a 5hp Merc and I want to put a bullet in it. Super hard to start. Unreliable. I use ethanol free 91 octane with both additives that Merc recommends and it still won't start. I am using the self contained fuel tank.

[@saltylandscaper7193]

Oh wow. Haven't thought about this in a long time. I have a 1953 (i believe that's the correct year) evinrude outboard i got from my grandfather after he passed. It ran just fine when i was a teen. Then sat in his basement for about 25 years. Then has been sitting in my garage for several more now. I wonder if i could actually get it running again some day.

[@pepperjake44]

My dad had had a 1963 15hp Evinrude that we kids couldn’t kill. That thing ran great until he sold it I the late 1990’s. I’m sure you will get yours running in no time.

[@incognito9510]

My Dads 1955 5hp Johnson ran like a top and it always started on the 2nd pull. ALWAYS ‼️. Unless of course it was already warmed up 🤷🏼‍♂️ A restart was a one pull unless pilot error flooded it 😂

[@jontrenthem3751]

You will be surprised how these vintage motors will crank and run with just a good carb cleaning. Have a go at it

[@jordanbrazell6933]

I cleaned my carb and my fuel pump but my motor seems to take to long to warm up I don't understand why? Any idea?

[@robertb7254]

Steve one more question on those plastic carbs on lawn mowers…..the primer bulb on our Sears Briggs mower has no tubing connected to the carb just mounted against it …seems odd and it’s hard starting…..

[@thebminusshow]

Great video. You might need some craft brew cans on your lineup in the back. DM me and I will send you a couple cans.

[@eugenewillsey2135]

Hey Steve Nice job on the main jet clean out with the micro drill . another thing you may be able to use is a tip cleaning set for a cutting torch . find the appropriate size and run it through. nice wide range of diameters . liked the video , keep up the fine content Steve , that's at least one beer celebration for that..LOL

[@StevesSmallEngineSaloon]

Right on Buddy..

[@davids8133]

I was curious if you have run into problems with small engines not starting after being used for a while, i.e. using the string trimmer / lawn mower engine a while, then cutting it off to come in and cool off for 10 minutes and then the engine won't start again. This is a fairly common problem and I would appreciate it if you could do a video regarding this problem. I'm sure there are many others that would appreciate it as well.

[@chrisssmallengines7163]

Hey Steve , I have a homelite XL2 . I would like to find out how old it is .the Canadian serial # are different than the American ones te serial # is 3345T095 . Thanks for the video's .

[@billkrause4585]

Okay you did good, but we want to learn more Steve. How about a little repair knowledge on repairing a outboard motor's starter, and a bit of a electrical diagram on the starting system for troubleshooting a bad rectifier that wired to the coil, or maybe changing out the starter, starting relay, and rectifier ... say the guy has these problems on his dingy having a key switch ignition. Tie it all in for us to make it interesting.

[@Johanneshandmark]

I have a Yamaha 4 hp 2 stroke. Every time before i start i have to choke it every time and when it starts at 6-7 puls i have to choke it back oterwise it will stop in 5-6 seconds. Is it the carbulator that need to be cleaned or is it another problem. I have changed spark plug so i dont think it is that causing this.

[@Aaron-hi7if]

STEVE, I say it over and over, ENJOYED YOUR VIDEO AGAIN!!!!! And hell of a video brother!!!! Kick ass bro!!!! Peace and love......... catch ya on the flip.....

[@StevesSmallEngineSaloon]

Right on Aaron! Thank You...

[@TTTT-rc4fv]

Hello ! Was out on the water for an hr no issues with this engine. I stopped it for 25 mins and went to start again and it wouldn't. It's my first outboard and didn't know you have to put the throttle on a certain a position and then pull the rope, I have been pulling the rope without throttle on set position and It has always taken me 7 pulls or more to start it so I think I flooded the motor. How do I de flood? is there such a thing? I tried putting throttle all the way open and choke closed to possibly deflood and cranked it ten to fifteen times and then tried with throttle on the start position to crank but have had no luck starting, tried also with choke on for a few strokes with no luck either. Could I have fouled up the spark plug?

[@eduardocortes-dv4lo]

My Yamaha 9.9 JMH 4 strokes its physicaly hard to pull, how can i fit it?

[@loupecci4901]

Steve is the doppelgänger of Carl, the assistant greens keep from Caddy Shack.

[@jontill78]

If you want to cut some corners sometimes you can take the fuel line loose and shoot some air through the carb if you have an air compressor. Doesn't always work but most of the time thats all it takes .

[@tomwilliams8675]

If you didn't have the drill bit to clean the jet do you think spraying the carb cleaner down through it would have worked as well? Do you ever work on diesel engines in generators? Great channel. Syracuse NY.

[@michaelames6317]

Thank you Steve, I'm pulling my carb tomorrow.... same issues!

[@StevesSmallEngineSaloon]

Good luck!

[@mikemccrary9346]

I have a 9.9 and it takes 20-30 pulls it has a new gasoline tank pump carburetor bulb new gas all this was done at the shop once stated it only takes two pulls to start after you get it started the fist time

[@FabricatorFactory]

Cool. It's always a 10 mm wrench. Lol. Now to find the 10 mm wrench or socket. Lol. I got a 4.5 hp Sears outboard, 2 stroke, on my work bench. I'm looking for a water pump impeller to fit. Any one got one to sell?great video. Good job.

[@BrucesShop]

If I did outboards I would be a rich man. But my back would be toast.

[@StevesSmallEngineSaloon]

I agree 100%....

[@danatara69]

I have a new mercury 9.9 hp always had a problem starting from day one never buy a mercury ever again

[@ljlatorre1943]

Good morning Steve. I have a question for you if you wouldn't mind. I know this is not on topic. But I've been watching your chainsaw videos trying to get caught up. My question is I have a Husqvarna 455 Rancher and I would like to do some light Alaskan chainsaw milling with it. It currently has a 20-in bar. I would like to put a longer bar on could you tell me not necessarily the absolute maximum., But what would be The links that I could go with and still get decent performance out of the saw. Thank you very much for what you do!

[@janr.a.fischer3785]

Thanks Steve, but it takes much more effort to detach the carburator. My guess is the issue's there in my case..

[@doctordoom2710]

I love you Steve ....your actually saving lives with this one.... not just money! Thank you!!!!!!!!!

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@flarenator]

my lawn mower is like, if I Start..........im fine.......even after 23 pulls

[@johnhubbard3399]

I bought a brand new pressure washer from Sears before the store closed where we live Craftsman 3000 psi it would not start unless you gave it a shot of gas down the carb it sat for a year and a half or better and had rotten gas cleaned that out still didn't start took it off blew it out there are 2 holes in the face by the choke butter fly blew those out now it starts at least on the second pull must of had some crap in it from the factory.

[@catherinelarson7975]

Have a 99 Johnson it’s quite old just had it tuned up, hoping to get it in the lake soon but the guy that turned it up ran all the gas out of it now I can’t get it started got any advice?

[@iluvucuzjesus5347]

My mercury starts but then when I start it again it wont start . I f I wait an hour it will start again . Any help with a diagnosis would help thanks

[@conradb7200]

Can anybody please explain to me why Honda engines are, without question, the ONLY small engines that appear to be completely dependable and able to be started the first time EVERY TIME? What exactly makes them head-and-shoulders above Briggs & Stratton, Kohler, Vanguard and others?

[@A50S2D]

Perhaps MOST Honda engines, I have a lawnmower that is really difficult to get started every time.

[@tangydiesel1886]

I have a Robin Subaru that's dang reliable, but I agree, I pay the extra money for the Honda. The Briggs engines are mostly Chinese parts anyway.

[@marcharris2734]

Well... I work on outboards and they all suck if nobody maintained them properly. Especially using ethanol

[@conradb7200]

Ryan Kinsler Lol ... I come from a generation when “Made In Japan” meant pure, unadulterated JUNK! How times have changed😂

[@christinamoneyhan5688]

conrad b ,I came from that same generation too. The reason that things have changed as that we Americans rebuilt there country after we had to blow them to Hell. All there industrial was new as we were still using worn out machinery. Our factories just did not get modernized until the 1990s when they were forced to in able to compete with other nations. We are doing the same thing with China( buying there junk) building up a Communist country so they can become a world power and that's exactly what they are doing. History repeats its self and U S A. still has not learned.

[@JoshKilen]

very nice job, do you have a video on how to clean a Nikki carb on a Briggs engine?

[@jdretiree2433]

I wouldn't go too far out in the ocean with that boat and motor

[@thomaslockley945]

jdretiree yeah I'm sure he's going in the ocean with that little boat lol with fish as big as that boat....

[@2aminitials]

How far out in the ocean Steve goes depends on how much liquid courage he has consumed.

[@Leonardokite]

Dude, he's ready to head out to international waters!!!! Hawaii here we come!!! Hmmmmm, what beer to take???

[@jessecoleman2271]

I would go out on the ocean with a pluged carb! Def would go

[@JoshSees]

Why does 2 cycle smell great from an outboard and not so nice from a chainsaw? I always wondered.

[@Icecold0505]

In one situation you’re working hard. In the other you’re going fishing!

[@TonyEnglert]

You should get a torch tip cleaner set. You can get them from any welding supply store or Amazon. It is a set of thin round stainless steel files that are made for cleaning cutting and welding torch tips. Get the 5" set and you will be able to reach places you can't reach with a little drill bit.

[@TimsWorkshopTJY]

Here's a tip I accidently found out. I didn't have just regular fuel to start it on a video last year so I hooked up my 50:1 old outboard fuel mix and just ran it for a little and stored it for winter that way. I went to start it this week to get ready for fishing and first pull well actually 2nd because I forgot to pull the choke on and it fired right up. no cleaning carb this year on the 4hp 4 stroke yamaha. Lake fishing here we come.

[@StevesSmallEngineSaloon]

Nice work!

[@williamwhitehead8362]

I think you should've done that first before you try to start it up yesterday just my opinion

[@coreydavis6427]

Great video of explaining the problem.

[@StevesSmallEngineSaloon]

Thank You...

[@concernedcitizen3651]

The A Team....I love it when a plan comes together......Thumbs up.

[@StevesSmallEngineSaloon]

Thank You...

[@keithfowler6876]

I'm not a very good marine engine mech , but I'm pretty good at drinking beer,

[@donaldsaunders4736]

Great video Steve my buddy has a 3.5 mercury outboard 4 stroke very hard to start but it runs perfect when it do start so I will tell him to clean the carburetor thanks so much. 👍

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@MikeSheasheaDtree]

Someone gave me a Johnson 18HP 1958 . It won't start and to pull the rope , I think I pulled my arm out....I think I need a starter for it. Anyone know about these motors?

[@gregkidd5731]

Check for spark first those engines use points and the contacts on the points get corroded and won’t conduct electricity. If you’ve got spark then you’ve got to look at the carb

[@bfflorida2311]

My problem with your approach is that you are cutting into my working beer time.. You are fixing things too fast.. It should take at least 6 pack .. Very disappointing..😁

[@StevesSmallEngineSaloon]

LOL! Sorry about that buddy...

[@dennismackiewicz1032]

How did you know what size drill bit to use?

[@bobwayne911]

WOW Steve

[@stevensmith1881]

Hey, my 6HP takes 8 pulls to start too. I'm going to clean the carburetor before I take it out again. Do you have any trouble getting it to rev up to wide open throttle? Mine seems to bog a lot. Maybe cleaning that main jet in the carburetor will help. Thanks for making this video. There aren't many Nissan/Tohatsu videos out there.

[@janetyeoman1544]

Steven Smith , my tohatsu 2.5 hp is labelled as a Merc. Runs great for years. No shift levers . Just start and go like a lawnmower. Your Tohatsu is a quality product.

[@humphreybugoy3865]

Thank you for this wonderful video, it really helps a lot, we have had problem with our rescue boat engine onboard ship

[@StevesSmallEngineSaloon]

Glad it helped

[@bush600r2]

Awesome job Steve. Love your work mate☺👍. I have a 15hp 2 stroke outboard that gets parked up over winter. Do you reckon you could possibly do a video on the maintenance and maybe good ideas for when parking it up in the shed and what to do when bringing it out for summer sometime, some tips or any advice for yearly service etc.

[@sweda8119]

I sit in the creek for two hours trying to pull start a 25 hp mercury and you pull in it no problem

[@darinmckillop5044]

Drop it off the back of the boat paddle in and buy a used 2 stroke😁

[@OutdoorsWonder]

I was hoping you can show us how to take out the carburetor

[@bootersdad]

Steve you are the man! You'll NEVER end up like Gilligan did!

[@StevesSmallEngineSaloon]

Thank You...

[@SeeMooreVids]

Well, this spring I’ll be doing just this. Wish we had a gas station local that had premium non-corn contaminated fuel. Thx.

[@nyjohn12]

Working on your own equipment - A Busman's Holiday

[@Meyers2strokeRcgarage]

Have you done a wallbro carburetor?

[@antonyjohnson5779]

How to do the water pump and impeller on that same motor,Please.

[@markhuyette8509]

For a good fix like that you deserve a good bear not caned piss !

[@smallenginerepairs3772]

Thats 90% of carb issues. Thats a good quick fix should keep those tools in the boat if need too ....get your ass home. 🤘

[@StevesSmallEngineSaloon]

Right on ...

[@johnbrianneary8844]

Txs for video. What I did: Take carb out. Open bowl. Remove jet and let it all soak in White Spirit overnight. Reassemble and bingo.

[@granthopper4132]

NO ONE SHOULD EVER WORK ON AN ENGINE WITHOUT A CAN I F BEER, LAW!!

[@RONALDB62]

It has an internal gas tank right? What happens when u try to start it that way?

[@ronweaver7089]

Steve ,this is an off topic question sorry about that. I'm in the middle of a project and hope you can help. I have a Duerr#678 8hp chipper shredder in bad need of chipper blades. Would you have any idea where I might locate some.I think the company out of business. Or could I maybe be able to find a machine shop to make some for me. Great Visio by the way ,I don't have a boat anymore but will that fix filed away for future.

[@johnmoynihan4616]

Thanks Steve, you have given me the confidence to have a go at fixing a few problems with my garden tools. Particularly the carburettor issues. Thanks again...

[@StevesSmallEngineSaloon]

You're Welcome...

[@MrAwesomeglock]

Any 2 stroke outboard videos. Thanks for the tip. I need these drill bits.

[@brandonlawncare2176]

Why my edger machine when I hit the gas shut off

[@theodorecuringa673]

Tried this on my 1970 Johnson 15 horse which was taking 7 to 10 pulls to start. After the clean out, it starts on the first pull. Thanks for saving my arm.

[@StevesSmallEngineSaloon]

You're Welcome...

[@paulsmith5872]

Feels good when it works . Ihope I can share your sucess now with my outboard. Thanks

[@StevesSmallEngineSaloon]

Good luck!

[@tomdewey9907]

I use torch tip cleaners on carb jets & orifices , no drill bits. They are like $4.00 off of eBay/Amazon.

[@maxhammontree3169]

I subscribed so that some day you won’t have to drink that dog vomit anymore. Great video.

[@StevesSmallEngineSaloon]

Right on Max..

[@kbjerke]

Great vid yet again, Steve. If I may suggest, though - I use welding tip cleaners as opposed to drill bits. They work every time!

[@StevesSmallEngineSaloon]

Thank You...

[@bearallen8010]

Ethanol fuel strikes again

[@robertmailhos8159]

Another great job with the getting that boat motor going my Canadian brother when testing the compression on a lawnmower motor what should the compression tool read 🙄? Oh by the way your they man I'm happy to hear that motor run. 😀😀😀😀😀😀😀😀😀😀😀😀😀😀

[@zanemaddux5083]

Hey Steve big fan for your videos would you do a video or recommend the best 2 cycle engine for lawn and garden and for marine applications? This would be of great help. I run mix gas at 50:1 with stable and occasionally add sea foam to the mix as well. I then exercise equipment at least once a month except for the outboard Mercury 25 horse 2 cycle.

[@thangknowa2567]

Many of those small engines just have a fuel filter that's actually just a small strainer. Needs a fuel filter/water separator, next problem solved!

[@stanparsley9186]

I have no small engines to repair, but this guy is cool.

[@StevesSmallEngineSaloon]

Right on Stan...

[@craigbuchan316]

Yep going to go try this on my old Yamaha 8A. Runs like a top when its running. But a mongrel to start.

[@StevesSmallEngineSaloon]

Good luck!

[@denyboy15]

Steve I've got a force 9.9 outboard that is from 1988, after few minutes trying to run it wide open on the lake it starts to get weak and then dies. The impeller is working with plenty of water.