How to Fix Cassette Tapes The Right Way. Open, Splice, Repair Like a Pro.

There are a lot of videos about cassette repair, but this one shows the right way to easily fix difficult-to-open prerecorded cassettes, splice them and repair the pressure pad.
Learn how to splice a tap. Learn how to replace a broken pressure pad. Learn how to fix a tape.
For a link to some of the items I use and recommend for tape repair and deck service, visit my Amazon affiliate shop page: www.amazon.com/shop/fluxconde...
#cassette #electronicsrepair #stereo

[@FluxCondenser]

For a link to some of the items I use and recommend for tape repair and deck service, visit my Amazon affiliate shop page: www.amazon.com/shop/fluxcondenservintageaudioelectronics?tag=onamzfluxcond-20&linkCode=ic7

[@davidherron3136]

I think it's pretty important to work with very slow moving super gel glue. That cheap stuff flows like water and will destroy everything lol

[@oldradios09]

Why is it always the tapes with the most interesting stuff on the label always seems to come apart at the spool? Lol. I got a bunch of cassettes from a garage sale that had someone’s recordings from 1971-1974 and tried to play the oldest tape in the bunch, and the leader popped right off the spool and the take up reel was spinning rapidly. Murphy’s Law I guess? 🤷

[@FluxCondenser]

Yup, Murphy’s Law. Or maybe, Dolby’s Law.

[@WHAT3V3RMAN3]

All I gotta say you’re brave if you do it on a 1990 cassette tape because it’s not like they’re still making them but the rarity of original tapes from the 1990s or before it’s just priceless. Minus one from the history collection

[@skrall107]

I'd wager that a repaired tape is worth more than a broken one. Granted I could be wrong, I'm new to cassettes, but that's my guess.

[@drpicklephd]

thank you SO much for this video! i've recently started buying some cassettes here and there, and it's been an absolute pain trying to find thorough resources on repairing and maintaining cassettes. this video was incredibly helpful, and i'll be sure to check your channel first the next time i need any kind of audiophile help!

[@jaychall100]

This video was a huge help. I recently bought a two tape album and both broke instantly where the magnetic tape connects to the plastic tape when played. I tried the method of opening the tape on an old home-made tape to see if I could do it without damaging it, but didn't have the right tool and was a bit impatient. I managed however to make use of this tape's plastic section to fish out the plastic tape on the tapes I was repairing, since the magnetic section was already exposed. It took a good few hours but somehow it worked. I could then follow your advice on how to repair them from there.

[@FluxCondenser]

Glad to hear, Jay. Congrats on getting it fixed.

[@carston101]

Thank you!! I just borrowed my parents old box of cassettes and their little radio to listen to and pull out some of the music i remember from when i was little. And what heppens but the one cassette i was looking forward to the most split the ribbon as soon as i started playing it. I made due with what i had, which was a pair of scissors, sticky notes, scotch tape and some tweezers. It may not be the most elegant (or even proper), but the cassette is playing just fine as i type this comment. So again, thank you for this guide.

[@DeadRelatives]

Thanks for taking the time in sharing your tips and experience. I like the way you kept in some of the problems that can arise! Trouble is now I want a nakamichi rx-505!

[@FluxCondenser]

My pleasure. Sorry about the hit the video will have on your wallet, though ;-)

[@deb533]

Your patience pays off!

[@JTBivens]

Watched to validate that I was opening the case the right way lol. I used heat resistant tape to do the repair. Trimming the sides with a blade. Great video thanks.

[@waterknot1]

If you use a tape dispenser, you can pull a piece of splicing tape and cut it with the razor blade then stick one end to the razor blade parallel to the edge which helps to align it before you stick it down.

[@albertocabezas282]

Very complete and informative way to repair those old tapes. One word of advice: before you touch the tape carefully wash your hands to prevent any grease on your fingers won't finish over the tape ruining the sound.

[@brandona.4600]

Thanks for the clear instructions

[@rfd6039]

Thanks, helped me fix my Pink Floyd’s the Wall Tape

[@FluxCondenser]

Fantastic! I wore out my cassette of The Wall when I was kid.

[@Gauntlet1985]

Superb tutorial! You explained everything in detail while clearly showing each step you were doing. Appreciate the help. Thank you

[@InsatiableMonkey]

Thank you for this. I was able to repair some irreplaceable family tapes that had broken using this guide. (I used 1/4" wide kapton tape and cut it to size with an xacto knife). Tapes play great now and we were able to digitize them for safekeeping :)

[@stevemaricic7585]

Very thorough.

[@richardwalker2645]

I bought a splicing kit and have undertaken many repairs after watching this video 😁

[@josebaaz7461]

Awesome video!! I just got back from the Swapmeet and got my hands on a nat “king” cole Unforgettable cassette. I have the same in CD and vinyl record format . My favorite song (I love you) for sentimental reasons sounds like it was recorded on a cheap 8 track cartridge and with the recording cassette the same song sounds a lot smoother .then it snapped at the end and this video came in handy. Thanks for helping me out.

[@grzegorzwojcik153]

such an amazing video! So informative, you've saved my beloved pre-recorded no-screw tape! Thank you so much

[@allanredford6070]

totally brilliant. the pot-it tip VERY helpful. personally, if tape still plays and not avilable on YT etc., I would dupe it, in case rwpair does’nt work 100% on brecored blank BASF caettes diacard top and side SM components(if fitted), if tape is jamming-de-spooling(one at top, & two side-arms.

[@AlanGregorySEO]

great video - i have a few tapes needing work so will be back once i have my tools to do the job!! Love the tape deck by the way that's a beauty!!

[@cellokratzer]

Thanks a lot! I didn't follow everything as professional as you showed, but it was enough to fix a 42 year old cassette (adhesive tape on both sides had come loose..)to run it once for copying.....

[@FluxCondenser]

Glad it helped!

[@darrenbrana1723]

Very good instructions easy to follow keep up the good work thanks.

[@FluxCondenser]

Thanks for watching!

[@RobertC19850209]

thank you, i will def try this with a few older tapes

[@kevincozens6837]

Thanks for the information. I was able to open and repair a sealed cassette that was about 40 to 45 years old. I was able to digitize it but I may have to do it again. There were variations in tape speed part way through the tape. The tape recorders I have need maintenance as they have been used in a decade or more. One hasn't been used in several decades.

[@homestudioculture]

Super helpful tutorial, great deck btw.

[@cassettekaier]

Nice work man, thank you for your video

[@oklahomaroserock6904]

Going to use this to fix my new Heart tape. Thanks :)

[@FluxCondenser]

Good luck. Let us know how it works out.

[@fustindrench9250]

Great information thanks for posting this tutorial.

[@puffyd58]

Thanks so much for a great video. I'll use this to guide me through a critical repair I need to make on a demo song I did more than 30 years ago . . . the only copy I have. Let's hope I'm as successful as you were. Thanks again.

[@cassettekaier]

Nice work bro, thanks for your sharing

[@salwilk558]

Today i put a screwdriver into a cassette, and then ripped it apart (it was sonically connected, literally put a screwdriver into the tape path and bent it , exploded in my hands lol ). Took the spool and put it onto the replacement . I then taped down one side and got both the sides spoiled close as possible. The tricky part imo is getting the top tape shell back on without pressing into the tape on the tape path . I’ve never felt more accomplished AND IT WORKS . The tape is now worthless but it has exclusive stuff i cannot find online . Always pre wind new tapes, the factory splice sometimes snaps from being so old

[@Misfitnz8]

Very good video , very helpful thank you

[@kimberlysmiley5071]

Yeah, this is much better than the Scotch tape method I used when I was a kid😂

[@apistosig4173]

Hey Man - hugely interesting - fabulous presentation / demonstration. Been doin' this for years - more recently I have been digitising my cassettes with Audacity. Have burned a few to CD for a friend who plays these on-air - they sound fantastic!

[@pandelistcouxnikas3704]

VERY GOOD VIDEO

[@oddyoh]

Great video. Straight forward, no nonsense approach to this common problem. You’re the Bob Ross of cassette repair, an artist! Happy Accidents!

[@FluxCondenser]

Thanks!

[@captianbubble]

I have cassette tapes that are mostly sealed ones that need repair. They all have that pressure pad issue. And another tape just randomly snapped at the very end. The tape is sealed too. Some of the tapes I fixed, have the snapping right where the Lier is, because, the sticky thing comes off. Other tapes are really easy to repair. With screws in it of course. I also made a mini tape repair kit for tape parts.

[@lozziel9662]

Some good hints and an excellent run-though thank you. Although the tape should definitely go INSIDE the side "posts", otherwise the rollers are not functioning efficiently (I have checked this on a couple of transparent pre-recorded bodies). I also prefer the "bend until it creaks" method of opening the bodies, then using a sharp edge like yours, if required - they usually come apart quite readily without cutting. EDIT: upon further research, it seems that both routes are used, (even in otherwise identical cassettes), so I change my advice to "it definitely doesn't matter!"

[@VicBoD]

I just found cassette shields had screws :) Thanks!

[@jake105]

That was awesome. I wish I would've known about the "post-it". My Dire Straits - Brothers in Arms cassette I've had since it's release in 1985, parted last year. I've got older tapes that are still going strong. But that cassette was special. It always sounded amazing in my system.

[@pallavisreetambraparni6995]

Nice work. Will save your tutorial on tape repairing

[@dominicjames8559]

First time watching a video in 720p60! I have half a dozen cassettes to work on already from 1972-94! That's an idea for a lockdown project! Thanks mate! 👍🏻👂🏻

[@FluxCondenser]

Have fun. I’ve got piles waiting for my attention as well. You’re right, great project for lock-down!

[@dominicjames8559]

I would add that half of them are older than I am! They include J.J. Cale 'Naturally' and Pink Floyd 'Wish You Were Here'.

[@FluxCondenser]

@@dominicjames8559 You have good taste, young man ;-)

[@dominicjames8559]

@@FluxCondenserthank you sir! I'll let you know if I have any success. 👍🏻👂🏻

[@dominicjames8559]

Aaaaand... I'm sorry that you have piles!!! 💣💥👊🏻😅😆😂

[@billc6955]

I used your video to fix my Joe Cocker cassette...thanks

[@FluxCondenser]

Well done, glad I could help.

[@buggs33v]

I first was interested in how to repair the pressure pad. Your instructions and sources of material were very helpful. Great video. Loved seeing someone else using cassette players. Loved the Nakamichi cassette drive! One question: if super glue is used on the inside points of the plastic case, won't that make it impossible to reuse? I assume you would just then move tape over to a new unmarked case, correct? Are replacements available that screw together?

[@FluxCondenser]

Thanks, Jim. Glad you found the video helpful. As far as getting the cassette open again after using super glue, it won’t be a problem if you used glue on the outer edge of the shell if you repeat the step with the Xacto blade. That’ll cut through the glue. But yes, if you use a lot of glue on parts of the shell that you can’t get a blade into, it might make reopening the shell difficult. Replacement shells are absolutely still available. Check eBay.

[@carlosguzman7437]

Bro,you are the MAN

[@FluxCondenser]

Joe Jackson is the man. I’m just a fan.

[@lindawolffkashmir2768]

You can do this with VCR tapes as well, there’s a couple of extra parts in them, mainly the locks on the tape reels, and sometimes a little T piece that goes between them that have to be set in accurately, but the principle is the same. And most VCR tapes have screws.

[@FluxCondenser]

Yes, all tape recording media is relatively similar and can be repaired with splicing techniques. Even digital formats.

[@Aaramlias]

Great video .. i'll have to save it incase I need this information in the future. Do you have videos on how to fix tapes that are running slowly or ones that have broken cases? I have at least a dozen tapes (possible more, once I test them all) that have the slow running issue. Another tape is going to have to pulled apart to figure out what's going on it with it. It's frozen and the tape don't move in it no matter what I do. These are all pre-recorded tapes from the 70s-90s mostly.

[@edwardedward7974]

I managed to open the case using a hacksaw on the four corners .When you have opened it please make sure that you have the case with the roller pins facing up towards you otherwise it will be MISSION IMPOSSIBLE ! Cheers Eddie

[@polarjet1833]

Thanks for this video, I got a Jim Croce cassette with no pressure pad, and a blank cassette just begging to have its pressure pad put in the Croce cassette

[@UnulOarecare]

Thank you from Romania, Brasov - followed your instruction and for one cassette by opening it I found out that one of the plastic roles was off, still inside but the pin that was holding that was missing - used a sewing pin to manufacture one and everything was back in place - this cassette is coming from my dead father-in-law so it has sentimental value - loved the joke about hemoroides - piles, never realised that piles is the equivalent of that - translation in Romanian/traducere romana - multumesc din Brasov, Romania - am urmat instructiunile de aici si la o caseta am descoperit in interior ca una din rolele de plastic cazuse si axul ei disparuse - am facut un alt ax dintr-un ac de cusut si acum totul e la loc - casetele astea sunt de la socrul meu care a decedat si au valoare sentimentala - am apreciat gluma despre hemoroizi - piles (mormane) - nu am stiut ca piles poate insemna si hemoroizi pt britanici

[@FluxCondenser]

Glad it helped, Unul! Nice hack with the sewing pin.

[@UnulOarecare]

@@FluxCondenser thank you - nice job once again with this video than brings back to life vintage things

[@soulslip]

I love finding thrift store home recorded tapes! As well as pre-recorded. But the home recording ones are my fav as they are sometimes sample gold! Best one I have found is some lady singing and playing organ at a church and the reverse side is a brother and sister playing in a room and at one point the sister yells at the brother who is being mean and he laughs at her so funny, but he gets in trouble. Another one is some little kid names eric who is playing the recorder or flute for his grandma and he seemingly plays random notes but is super serious and it’s amazing! I can’t wait to sample some of these. Another good one is a creepy self-hypnosis tape from the 60’s.... talks about consciousness and mental fortitude etc lol also found some y2k conspiracy tapes as well... those are cool too

[@SixxRose22]

Thanks for the video. I fixed one of my tapes using regular clear scotch tape. Luckily, it was just unglued from the blue lead. 😎😎😮

[@foxyr4bbit]

this is some bob ross level relaxation

[@umeshupadhyay...]

Nice video of repairing broken tape .It is broken between lead tape and the mag tape ,so good solution.If the magnetic tape itself is broken then howvyo fix with your tools on the splicer andvthe blue tape .

[@Firebrand55]

A tip...get tapes from a charity shop and practice taking them apart, adding/removing leader tape, splicing...tapes that would be the very last thing you would normally buy...in my case, any opera, rap or chamber music! There are Tape Repair Kits, splicing blocks and splicing tape available on line....be prepared!

[@raymondbruce9964]

What is this tool you’re using to pry the cassette casing during the disassembly? My Journey greatest hits tape just did what your Fleetwood Mac tape did, and I’m crushed…I’ve been listening to it since I was like 5. 33 now. Thanks for this tutorial!

[@sickofthissh]

I just got my The Doors Classics cracked in two and NOTHING broke. Dropped some glue in the top holes and snapped it back together. I use sponge and double sided tape for new pads.

[@Tomsonic41]

Tapes that are screwed together, I can easily open up and repair. Tapes that are glued or sonically welded together are a different story. I can never get them apart - always end up breaking the shell into several pieces. Then I have to transfer the reels to another cassette shell to get the tape to play again!

[@johnlomasney]

Tedious patience needed

[@FluxCondenser]

Yes, indeed. But it pays off.

[@nowstick]

But Holy Cow,,!! That must be a Zeppelin Jam tape,, the way yer going down to the tightest degree !! But I love it,, tks

[@FluxCondenser]

I’ve had that Fleetwood Mac live album on vinyl since I was a kid and while it’s not one of their most popular albums I absolutely love it. Yeah, this tape probably ain’t worth $10, but I really wanted to listen to it ;-)

[@clownstudio6133]

I have many cassetts. in my home and i lovet to lisen music on them❤

[@logankirby8105]

Awesome! Thanks. So you only put the tape on one side only? So frustrating, lol.

[@dottiemitchell1651]

Can you show which items you specifically used in this presentation? I don't know what to buy on your Amazon page.

[@Zulonix]

I bought very few pre-recorded cassettes. My experience was those who produced pre-recorded cassettes used low quality tape that caused a lot of hiss even after switching on Dolby. I would buy high quality cassettes and dub them from a record player. In the 2000s, I bought a Sony mini-disc player/recorder. It was impossible to make a digital copy because of Sony's idiotic digital rights management. Of course we all know how Sony fared with that. ;-)

[@audiomez]

Do you have a feature on reattatching leader to hub?

[@FluxCondenser]

Not specifically, but generally this is an easy fix. In the hub there’s a small insert that can be removed. Remove the insert, align the leader with the hub and snap the insert back in to hold the leader in place.

[@joeseehusen2361]

Question: My leader tape came off the spool. How would one re-connect it so it's strong? Thanks for the video!

[@FluxCondenser]

You don’t connect leader tape to the spool using tape. If you look closely, you’ll see there’s a tab on the hub which can be removed and then you can slip the tape in place and secure it with the tab. Good luck!

[@MQ-bl6hr]

This seems complicated for me. But I thought I’d look up a video for fun. Thinking if I could just send it to you and you fix it for me 😂 I came across a Nirvana unplugged live. I did listen to it once! But realized I didn’t finish it through and it indeed was split I’m so sad about it

[@essiebryant2939]

Thanks for sharing you do need a steady hand and to be patient and I'd like to have somebody to do my tapes for me. I got quite a few needs to be fixed so it's going to take quite a bit of time but I will send for the kit through eBay so that I can get busy because I have tapes that are very dear to me my own piano playing and singing and I would love to preserve it , always save it and try and have it transferred to a CD so thanks again great work! Do you know how I would be able to do that transfer my music from a cassette tape to a CD?

[@FluxCondenser]

Essie, good luck repairing all those tapes. Yes, it requires a lot of patience, but it’ll be worth it. Transferring your cassettes to CD is a bit of a long subject to cover in the comments, but I can give you a general idea of your options. To do it yourself, you have the option of using a computer. You’ll need a sound card that allows you to input the audio from your cassette player, recording software and a CD burner. If you don’t have a CD burner, you can also use this option to simply convert the tapes to audio files such as MP3. Another option is to find an audio component that has CD recording and tape playback in one unit. There are actually units still being made that offer this feature and you can buy them from Amazon, etc. Note, that newer units don’t offer true Dolby (the licensing for the technology is no longer available), but the better ones will have noise reduction that should be somewhat compatible. You may find some older used equipment that has cassette and CD burning in one with real Dolby, but I’m not certain. The final option would be a transfer-service company which would accept your tapes via mail and transfer them for you. Hope this helps.

[@mercurialmagictrees]

I think there is cassette players that allow audio transfer to mp3 through a USB cable. That seems to be the easiest way to get it on a computer. Then you could create a CD from the mp3 audio your music platform (iTunes /windows media player)

[@FluxCondenser]

Yes, those options exist, but tend to be fairly low quality and also won’t provide Dolby. The best quality will be had by connecting a good quality deck to the computer using the computer’s sound card or an external DAC. It’s a more versatile solution as well as it can be used to transfer audio from LPs (using a preamp with phono setting), 8-tracks or pretty much anything with an analog audio output.

[@scottsmith7521]

Wow, seems like a lot of work for those non-screw tapes! So I don’t ruin a nice one, looks like I’ll need to go purchase some throwaways to practice on. 😅

[@kennynvake4hve584]

I have learned to take the right sized screwdriver and twist it in the top holes of the cassette, the holes that decide if you can record or not on the tape...that will start the opening, then work your way around.

[@FluxCondenser]

Kennynva, that’s a common method as well. I know many have good luck with prying and that’s great if it works for you. I always go for the blade method myself as I consider it less likely to mar or damage the shell.

[@kennynvake4hve584]

@@FluxCondenser What do you think about using a soldering iron to make the holes in the top so it can auto read some these cassettes that read normal that are chrome.

[@FluxCondenser]

Ouch! That sounds like a bad idea to me. It’s gonna smell horrible. It’s gonna leave an unsightly hole with deformed plastic that’ll have to be trimmed down. It might deform the shell permanently so it no longer fits in the machine. And, it may damage the tape inside. Open the shells, remove the tape and cut some nice clean slots with a blade or Dremel if you must. Or, transfer the tape to a suitable chrome shell.

[@markmorris5780]

Thanks Man. You helped save an oral history interview about MGM history from 1967!! Great Video.

[@fouady69]

Hi! I own a few magnetic tapes from the ‘70s and I was wondering if there was any way that I could save them from ripping apart (I should mention that even if I touch it lightly the tape rips in pieces)

[@FluxCondenser]

I wish I could help, but I’m not sure what would be the best approach with tapes that have become that delicate.

[@inspiredfigmentsarchives]

Tape baking, you may want to send them to a professional service to transfer however

[@m80116]

Just my two cents: it might be easier especially for a novice with an exacto knife to start from the tape slot and work it out from there towards the side with an empty hub or less tape. Also don't forget to replace the slip sheets inside facing the exact way you found them, they are not bilateral and they usually have a slot or two for them to be correctly aligned. Also remember to not flip your reels, you might end up with Side A onto Side B.

[@Mari_Iijima]

Hi, my tape snapped from the roller. It was not the tape was cut in the middle. It was snapped from the end / beginning. Can I still fix it? Thanks.

[@joshuaarmijo5213]

This helps me tp fix my wobbly Mariah Carey's Charmbracelet album, I just need to replace the pressure pad cause it's old

[@harryburnett7086]

I was doing this in the 80s

[@FluxCondenser]

Me too. The 1880s ;-)

[@retrolover659]

Which brand and size of adhesive tape would you recommend here ?

[@FluxCondenser]

I don’t have a brand preference. Just get something that’s specifically designed for splicing the type of tape you’re repairing. Cassette splicing tape is frequently labeled as ⅛” and 8-track and reel-to-reel tape is usually specified as ¼”. Hope this helps.

[@markusziman363]

Excellent video Flux Condenser Vintage Audio Electronics!!!! May I ask where to get these tools and accessories to fix tapes? how to fix a tape that has detached from the reel? thank you very much in advance for your reply

[@FluxCondenser]

Markus, I believe I mentioned where I got the tools in the video. Search eBay and you’ll find lots of options. If your tape has separated from the reel, look for the plastic insert which clips into the reel and holds the tape in place. Slide it out and then use it to re-clip the tape to the reel. Make sure you use a leader tape to connect to the reel as the magnetic tape will eventually break if it’s attached this way. Then, splice the leader tape to the magnetic tape. Hope this helps.

[@markusziman363]

@@FluxCondenser Thank you very much. Sorry, i watched the video without the audio last night while I was copying some cassette tapes and listening them at the same time, my bad.

[@markusziman363]

@@FluxCondenser The following question is probably a dumb one but i am asking you just in case. It is a very valuable and very old tape, just in case the plastic insert was not there or was damaged, are there any spare parts for this particular piece of plastic? I have several other tapes with the same problem and never dared to open them as I did know how to fix them. Thank you very much in advance for your reply.

[@FluxCondenser]

Markus, there’s usually a pin or tab insert. If you can’t locate one on your reel, you could consider buying some spare reels to replace the ones you have. Again, look on eBay for spare parts. You may consider taping the leader to the reel as well. Good luck!

[@seekbalance6891]

it would be more helpful if you could position the camera such that we the audience could see what you're doing with the blade. as it is the magnifier's rim is blocking our view.

[@mercurialmagictrees]

Excellent instructions. I was able to remove the split the shell on my sonic youth "day dream nation" fairly easily pulling apart the shell by putting a small screw driver in holes on bottom of the shell. There is no leader on the side that is available to me. The tape split at the very beginning and the hub has nothing attached to it. What should I do ? I was thinking I could get the splice tape it to the hub and underneath the magnetic tape. Is that a good idea?

[@FluxCondenser]

Taping to the hub is unlikely to hold. There’s a clip or pin in the hub that’s used to attach the tape. Remove the pin or clip and lay the tape over the recessed area and then reinsert the pin or clip to hold it in place. You can attach the magnetic audio tape to the hub this way, but as magnetic tape is fragile (especially as it ages) it won’t like being bent and held to the hub this way and it’s likely to break again. For a long-term solution, get some leader tape and splice a 6-8” piece to the magnetic audio tape. Then, attach the leader to the hub. You may consider temporarily holding the shell together so you can fast forward the tape and do the same on the other hub. Good luck, hope this helps.

[@mercurialmagictrees]

@@FluxCondenser yeah thank you it does. I was looking for the clip or pin in the hub but I could not find it. I was considering buying a repair kit that comes with the leader tape and splicing tape. Even though I allready bought a replacement copy , I am still curious to fix this one. Thanks

[@mercurialmagictrees]

@@FluxCondenser I was able to actually figure out just now that some of the tape and leader was so tightly wound around the hub I couldn't see the clip or pin. I carefully removed it from the hub and now I see that all I need to do is splice the magnetic tape together.

[@FluxCondenser]

Ah, fantastic! Yes, I was surprised to hear that there was no leader as most prerecorded cassettes have one (though not all).

[@mercurialmagictrees]

@@FluxCondenser yeah I was considering buying a leader cassette for _2.75 on splic it.com along with the cassette splic kit. Will the leader cassette be usefull when reparing cassettes? I can link to product. Do you have promo code or anything with splicit.com?

[@chrisa8990]

Question would the super glue break the case if you needed to go back and repair it?

[@FluxCondenser]

Chris, if you repeat the process as I showed using an Xacto to score the seam, there shouldn’t be any issue getting the case back open. Simply prying it open without cutting into the seam first, though, could result in a crack. Hope this helps.

[@bobsbits5357]

hi get a vine pin or needle use it to put blue on around the cassette i have a jig i put tape in when glue sets i have done alot taps over the years there is 1/8 edit tape and block you can get

[@Rockabillyman26]

what kind of blue tape did you use splice them together?

[@swami1]

Any suggestions for flattening wrinkled sections of old cassette tape?

[@FluxCondenser]

No. Once it’s wrinkled, it’s wrinkled.

[@swami1]

@@FluxCondenser Ugh. Thanks. After posting my question here I found another video of a guy using a cool iron to smooth out Ampex tape. That wouldn’t work on cassette tape?

[@AA-ui6sy]

Had no idea about the benefits of using the 45° angle, will try later. Good video!

[@FluxCondenser]

Yes, there’s more surface area for the adhesive that way, and the splice is less likely to get caught in the mechanism.

[@FluxCondenser]

The straight splice is good for cutting the leader where it attaches to the hub.

[@wendyorange1231]

Do you do repairs for others? If not, how do I find someone in my area with this skillset?

[@FluxCondenser]

Hi, Wendy. Sorry, no I don’t take in work. Why not give it a try yourself?

[@manuelcasasureno7814]

Where are you located? I have an old Memorex 45 cassette that came off at the leader just like this one. (Unexposed) Sadly there are no screws and I don’t want to mess it up?

[@infraredplayer]

Is it possible to flatten tape that is twisted or does it have to be discarded unfortunately?

[@DesignCutters]

I have a Cobra announce cassette that is a 20 second tape which loops, for an old answering machine. The tape got snagged inside itself and I had to open the case. Now I can't figure out how to rewind the tape so it can be listened to. Have you ever done this?

[@FluxCondenser]

It sounds like yours may loop similarly to an 8-track. If so, you may want to watch a video showing how 8-tracks loop on the spool from the outside and leave the spool from the inside. If I find out more, I’ll let you know.

[@FluxCondenser]

I did a quick search for “cassette tape loop” and it seems that there are a number of ways to accomplish this, but none seem to use a method similar to 8-track. They simply use various schemes to loop the tape inside the cartridge. I’d suggest doing the same search on Google and look at the images to see if you see a scheme that will work for your tape. To get 20 seconds with a simple loop, your tape player will have to work at a slower than standard speed. Or, the tape will have to take a more complicated path to allow for 20 seconds worth of tape. Good luck.

[@Lively_1185]

The main problem I'm having using scotch tape is any tape deck I tried playing on, all autostopped right at the splice. Is the tape too thick or is the play head grabbing the edge of the tape? I've repaired a dozen tapes and every single one had the autostop issue.

[@FluxCondenser]

Ronaldo, is the scotch tape on the back of the magnetic tape (no music side) or the front (music side)? The tape should be on the back side. Is the magnetic tape cut at the seam or is there an flap of tape remaining? There should be no flap of tape. Is the scotch tape cut exactly to the width of the magnetic tape and perfectly lined up with it? If there’s any scotch tape extending beyond the magnetic tape or if the tape path isn’t completely straight at the splice, that could trigger the auto stop. Also, make sure there’s no sticky residue. If none of those things are present, then yes, I would conclude that the scotch tape is either too thick or rigid and that’s why the auto stop is getting triggered.

[@Lively_1185]

@@FluxCondenser Everything you described I've done correctly, and I did find out it was me splicing the tape on the music side! Oh well, I'll need to fix the other tapes. Thanks for your response! No clue about tape gap tolerance. also I'm using the normal brand of scotch tape from Walmart.

[@thehangmansaxe]

What splicer are you using? It really stays in the groove without any extra help!

[@FluxCondenser]

Yes, it works really well. I believe I purchased that one from Splicit. Check them out here: www.splicit.com

[@thehangmansaxe]

@@FluxCondenser perfect!

[@hifi.david.]

can i get a link to the pad replace kit?

[@FluxCondenser]

Sure thing: www.ebay.com/itm/25-Brown-Pressure-Pads-Cassette-Tape-Repair-Peel-and-Stick-Felt-Free-Sleeves/392881992224?hash=item5b79977220:g:Q1EAAOSwP5JdH-~W

[@hifi.david.]

@@FluxCondenser Ty

[@jacoblabruyere2790]

Just because im curious..What disadvatanges are there to not trimming the broken ribbon and putting a tiny touch of super glue and putting them back together that way?

[@FluxCondenser]

Well, it’s not the traditional approach and the super glue is likely to perhaps not be flexible which could cause issues.

[@lassie6]

Not bad man.

[@FluxCondenser]

Thanks.

[@sameerchhikara8779]

Hi bro I have 25 yrs old panasonic cassete my Mom marriage was in it. Can you help me how I connect to you. In the casseste some white particles are freezed.

[@Chucky_canto_cabron414]

Hello… I have a question can you please fix mines my string came out I will pay for the work thanks ?

[@billieboybuddha4238]

You mention we want the blue tape on the 'inside' because the 'outside' has all the information. But magnetic stuff and this 'special' blue tape should not 'block' the information right? I see somewhere else where they suggest putting the tape on both the inside and outside?

[@kathypalmer2302]

HELP - Today a tape of my Grandfather telling the family history broke at the beginning of Side One at the Take-up Reel/Supply wheel. I attempted to open the cassette with the blade and STOPPED. This is too precious for me to break. Do you fix tapes? If not, do you know where I could send it for a repair.

[@FluxCondenser]

Kathy, I wish you luck getting the tape repaired. I don’t take in work as I do this for a hobby only. I’m not certain who could do the repair for you. I’m sure there’s someone out there if you decide to not continue with the repair yourself. Perhaps a Google search will bring something up. If you do continue with the repair, and carefully follow the instructions, you really shouldn’t have any issues. Additionally, if you’re not sentimentally attached to the cassette’s shell, once you get the tape opened and fixed, you could opt to transfer it to a replacement shell that uses screws to seal the case. That’ll make completing the repair easier and if it breaks again, you’ll have nice, easy access. You could sacrifice another tape to get such a shell, or buy a replacement shell which are available online. Good luck!