How to Fix Cracks On Your Car 2021

[@DIYFans]

❤Get Yours Plastic Bumper Repair Set Now: bit.ly/2PcrPbV ❤Free Worldwide Shipping.

[@mysorauz2745]

how about Malaysia agent?

[@bewell4743]

I should have been born with one of these. 😆

[@hankorejuela3403]

@@mysorauz2745 how I can get the bumper repear

[@geoffreycook7440]

@@mysorauz2745 NJ

[@jankristof8588]

Mám.zaujem

[@joshcrofts2090]

Just a heads up, you're meant to fix the crack from the inside so you dont make the outside look like shit

[@highdatalore2139]

Yeah he made it from the outside so we could see what he does

[@ds50driver20]

but he could sand it away

[@CableGuyRyv]

If you cracked a painted part, you need to sand and repaint anyway unless you want it to *keep* looking like shit

[@dennisbinkhorst2039]

@@ds50driver20 And then spray paint the entire part?

[@ye3zs]

@@dennisbinkhorst2039 it's that or buying a completely new part

[@jbizzy508]

The crack would look better if you did it on other side then you will be able to paint the outside without those showing

[@jaxonm7866]

Well this isn't how it should look at the end this is a plastic weld you sand the area and create a grove on the crack then melt hot plastic into the crack welding it to gather and on the top its pretty much just stapling hot metal into the plastic to hold it together then you would sand the top down and put bondo on on the crack to make it smoth and to hide the Staples then paint and blend it together then your car should look fine

[@danielbota3898]

Yep

[@justinbombs955]

Should be done on inside...then use Easy Sand on outside.

[@fly1ngpapaya]

@@justinbombs955 you can't read very well can you.

[@OtherDalfite]

You'd still have to body work the outside... Why bother going through the pain of that?

[@EmpowertothecreatorWang]

came independent, confident, more aware of things going around me like grocery or fuel prices and learning how to fix the car. I am so grateful for that opportunity in my life, or else I’d still be in a cocoon.

[@nealhead7673]

as SOON as I hear the first two notes I quickly turn the channel

[@killero00]

And where does commenting fit in this changing of the channel

[@nealhead7673]

@@killero00 To let you know that what was probably an informative video was, for me, immediately killed by that same whistling that had been connected to hundreds of USELESS videos.

[@amazoniancustodian]

@@nealhead7673 yEaH b A b Y

[@MrTheHillfolk]

@@nealhead7673 And because DIY usually means Dick It up Yourself

[@zl1521]

So u came back?

[@uhoh6771]

Or you could just use zip ties. A lot of people call it a "drifter's stitch" and they don't look half bad.

[@martindaniel2926]

Drift stitching look pretty cool, plus the term makes it seem like you did something cool. I did that to my old cruze after I hit a racoon, it looks better if you use stainless bailing wire.

[@MrQuijibo]

Half bad? It looks fully bad.

[@gr6e]

@@MrQuijibo it's called fashion. look it up.

[@MrQuijibo]

@@gr6e 😂😂😂😂😂 are you into stancing too?

[@TheCreedBratton]

​@@MrQuijibo💀

[@TheBigred138]

Absolutely genius. I wish I had something like this 20 years ago.

[@derekcollins1972]

I totally agree. I remember my father just wiring the crack together or trying to melt it ...Haha..

[@TheHardiya]

20 years ago most cars have steel bumper covers no?

[@derekcollins1972]

@@TheHardiya Plastic covers over steel bumpers even 20 years ago.

[@TheHardiya]

@@derekcollins1972 i forgot 20 yrs ago is 2000s, not 1990s

[@derekcollins1972]

@@TheHardiya I know..I had to think about that too. Time flies

[@tr7198]

Clamp it together. Put a mesh screen behind it fill in with filler sand prime and paint.

[@keithclark486]

Not hardly how it works But ok if you want to half-ass it.

[@crazyb3265]

To fix the look of the repair, I'd use a little bondo, sand, prime and paint. Thanks for this video.

[@birmatinagwan1185]

Kya Naam ha machine ka

[@richardcruz-torres4942]

I was thinking the same thing

[@babayoga3672]

This is how my dentist did my tooth implants

[@jmton6510]

Way to funny

[@Bob_Lob_Law]

Umm. What?

[@karlallspach5309]

Does he whistle?

[@henrybritto5425]

I love this new technique very good 👍👍👍👍👍👍👍👍👍

[@MakeitExtremeShorts]

Nice!

[@AT.3DITS]

The song always gets me

[@saidmoubsir5202]

What is the name of the song??

[@orvileknox3130]

@@saidmoubsir5202 the happy niGhtmaRe

[@mocchihedron8341]

Someone did something like this to my rare race motorcycle plastics before I got ahold of them. They were all crooked and nearly impossible to fix.

[@prawnstar502]

cause all cracks are perfect like that

[@setphoenix5455]

Actually, this works best with Cracks that are not straight. Those are gonna hold way better

[@rolandvaleriotv622]

nice tenhnology plastic welding good job

[@seanbaechle9162]

So impressive... You fixed it and then left the material you used to it do it where it was. S.m.h. Yeaaaahhhh. Real good.

[@madanjoshi8696]

Super idea ❤

[@isaacandersen1]

Yes I will of course go and grab the ARK WELDER I have lying around.

[@sakofinnbear5654]

Lmao right

[@nikolaikrastev7190]

car guys need this!!!!!

[@pythonpete]

And for the future moms in the house...C sections are a breeze nowadays

[@akam3317]

🤣🤣🤣

[@burntham8752]

Youre pathetic

[@pythonpete]

Pathetic?...you mean the guy that posted the 3 crying laughing faces?...Thats a bit harsh ya think?...better check your grille quick...your ham is burning!

[@mr.nicemice1220]

Snorted my milk, thank you

[@318super98]

My pfp was my face when i read this, fucking gold

[@AndrewKidd14145]

Plastic weld is a great skill

[@SumitKumar-xg3vl]

Name that product

[@diecast164andmore9]

You know....the thing.

[@doutlaw7806]

Plastic welder

[@Biswajit_DMLT]

@@doutlaw7806 fiber

[@stealth5126]

"How to fix cracks on your car" *Buys new car

[@empanada65]

God im so silly. Why didn't I do this before? Let me go get the crack welding machine from the garage

[@BBCforyoHoe]

Staple plastic welder...

[@georgepacheco9983]

A lighter and zip ties work well to.

[@jeffreykbevins7116]

I have never seen anything like this, that is neat .

[@cherrypepsi2815]

From a car guy: DO NOT DO THIS. Use a fiberglass body filler.

[@jaydenwatsonlw8910]

And zip ties

[@cherrypepsi2815]

@@jaydenwatsonlw8910 no

[@jaydenwatsonlw8910]

To bad

[@lordvader2907]

I was wondering if there were any other body repair guys looking at this and crying😂

[@jaydenwatsonlw8910]

@@lordvader2907 damn

[@kaneparker6594]

OOH YEAH CONGRATULATIONS

[@Asprettydoes74]

What if he is only filming the repair from the outside because he wants to show the repair...?? Maybe the lighting and the angle was better filmed from the outside...?? I appreciated the video. Thank you to the content provider! 👍

[@edykurniawan84]

What tools name? To repair plastic bumper?

[@kenduncan3231]

Band aids work great

[@junito1008]

I still waiting for the fix !!

[@frankmueller25]

Where do you buy one of these?

[@kPanosk]

What is the tool you are using? A regular soldering iron? How many watts?

[@jasonm106]

Thanks for the video!! Question: I’m about to cut a piece off of a plastic air intake tube on vehicle and want to patch /cover the hole professionally… What’s your thoughts/recommendations? Thank you!!

[@boomerman6994]

I guess if you want even more damage later on

[@CableGuyRyv]

Explain? How does reinforcing the plastic by embedding wire into it mean it will get more damage later?

[@boomerman6994]

@@CableGuyRyv cause the wire looks super weak and it’s going straight thru the plastic

[@doom6199]

Not sure, but that doesn't look like it finished, I'm sure the wire are supposed for the other side, maybe there are some extra step to get the job done. Well, I dunno, just guessing.

[@szabib2144]

That’s genius

[@RedEyedCowboy]

Tell me you can't weld without telling me you can't weld. This guy is going first.

[@realpatrickstar15]

Since we all got one of those laying around

[@gabrielbarnes6657]

bruh fr 😂 finally a sensible person.

[@Tome13Eclipse]

Drift stitches for the win

[@ToxxicTier]

Yeah, all have this thing!

[@_prasoon_]

Very good... Bought it. Need to buy a car now 😢

[@dryoshili]

DIY music be like :

[@varis_fitness]

Very nice ❤️

[@littleshepherdfarm2128]

Kids do not try this at home. He is a professional....🤣🤣🤣🤣

[@KLOKSLAG1911]

Nice tool 😊

[@DanaKotze]

Nice👍

[@allahkabandaibneadam9841]

Beautiful

[@900bz]

No1 gonna talk about that tire fix? That wont hold air unless it had an inner tube

[@handsandpaws1027]

if thats me, i would put those on the inside part then seal the front part with putty, smoothen it using sandpaper, ready for painting .

[@Zeekdobagui]

drifters: *zip tie.*

[@Fred_Klingon]

Does this last?

[@BaldTorment]

Frankenstein's Car

[@kamleshtrivedi3430]

Great good job

[@vipvitthal918]

What is the process plz tell me

[@seankirby8831]

It's like stitches for a car

[@salsacake]

stamp the King Ranch logo on everything, got it

[@夜明けのヴァン-y1o]

これで強度出るんでしょうね。たいした技術。凹凸はパテで埋めてから表面ならして塗装。

[@commanderhasbulla3732]

Triggered people in the comment section thinking they know body work

[@bekimdedusaj8688]

Wow really

[@GaryDavis-ll4uc]

U do that from back side, that way it's cleaner looking

[@treylem3]

Quick set epoxy is easier, tho may not hold quite as strong

[@durgarana5509]

It's good 💡ideas

[@1Himiko7Toga]

I'm planning to fix a Jzx100 drift bumper on my Lexus LS400 1993-1998, so I'm thinking of cutting it into 4 pieces to extend and make It fit no one makes the bumpers so I gotta DIY

[@godman5043]

Nice

[@Shooting_Stuff]

I would but this and fix my bumper.

[@Failedprodegy42]

Cool. But why did you do it on the outside of the bumper where it shows?

[@themaids360]

they sand it after , then molded sanded againg then painted

[@Monojeetroy04]

First step:- bring the damaged area with the car in your table.

[@tdawg6615]

The fuse is stronger if you don’t water it

[@soxxz2028]

ah yes, beautiful

[@ryomix3587]

This guy didn't have any other songs to decide

[@masonmcgrew9790]

Yea welding was my first idea also

[@CL4SSiCS]

I wonder how the cracks got so perfect

[@pratice3580]

This is not allowed in germany. We use them for the sensors at the front and back . We throw them away for safety reasons and put new ones on it or just replace the destroyed parts.

[@letztv8811]

Whats the name of this product?

[@KOLOBOK_KORTOWKINO]

надо было извнутри пластика это сделать, чтобы снаружи не было ничего заметного и был ровный поверхность!

[@julloa9934]

The car got stitches

[@mataramid7551]

What the tool name?

[@zackjones8437]

Where do you get that thing

[@delta2080]

I just need the tool? What is it?

[@calelvaldez6986]

Cool you have razer logos around your car

[@hankorejuela3403]

Very cool but we're i can buy it from

[@koshi.376]

Oh thank you let me go get my thousands of dollars of equipment just to fix a crack on my car👍

[@xredxaxxfire]

Yeah. I would totally do that. If my truck wasn't made out of metal like it is.

[@wjdwodn2k]

Please let me know this tool name.

[@hugoevia8180]

First they had to sand the part where it was going to be welded so that the weld would not come off but it's okay

[@mukeshbhond6091]

Hi.... Please name this device....

[@jcud3842]

That’s the most crackhead way ever to fix your cracked bumper

[@austinirvin4204]

Genius puts repair on outside of panel 💀💀💀💀💀

[@ongnguyen7436]

How did you do that ?

[@Rotbartokanal]

I Jused it for 🏍 Parts

[@RajuKumar-ms3rp]

Super excited anna sir

[@universocelestiall]

Que ferramentas é essa?

[@devyendusingh8113]

Where i get it

[@norrisgow6130]

Where I get one

[@ashmohd8825]

Painful to watch. 1. You fix it structurally from the inside (always). 2. Only using those flimsy staple wires with heat will not last, the bumper will crack again with change in temperature. 3. You will have a lot of trouble smoothing that over with body filler. Just keep it simple, use 2 part epoxy glue with a first aid bandage dressing from the inside, and then use body filler on the outside. (you will always need to respray or at the very least, use touch up paint, that part is unavoidable).

[@michaelmiller4638]

What kind of machine is that

[@игорьмакс-к4ж]

Я бампер скотчем замечательно ремонтировал - пару лет держалось без проблем... Пока окончательно не разбил бампер. 😁

[@cmd2973]

Lmao now it looks worse 🤣

[@fuzmaginty5822]

take it to the garage have it done properly

[@scarce911]

The garage will do the same+charge you around a grand