How To Fix Dodge Ram Faulty Turn Signal

[@PewLifeCed]

ive been had my truck 6 years and finally someone is solving all my problems. I actually just started having the turn signal issue though but the wet carpet has been a pain

[@Hunterrnorris]

Luckily mine has stayed dried since. But I feel you, I love the looks of a 2nd gen, but they defiantly have some weird quirks

[@earthage3020]

My wet carpet issue started immediately after I Didn't Take Seriously the WARNING Note on the Portal to my Radiator Cap --- and went ahead and added Plain old Distilled water to the Radiator (only about 1/2 Gallon). So I determined that I had now Created a Leak in my Heater Core, so I Immediately Went Down to the Auto parts Store and bought a Bottle of Radiator STOP Leak: And the Problem got about 80 percent Better. A week or so later I got the Other Type with Copper in it, and Put it in as well: and NO MORE Leak on my Carpet. Problem Fixed.

[@petesmith5092]

​@@earthage3020❤ hope you live in a warm climate, because your heater core is probably plugged now. Or soon will be. There's no such thing as mechanic in a can.🙃

[@markkazmierczak1405]

Dude thank you so much for making this video! I have a 2001 ram and had the EXACT same issue. Switched out the relay and everything is all good. Thanks again!!!

[@WayneMurray-n7k]

DUDE you saved me so much money I had no clue what was wrong with my 2001 Dodge Ram v8 1500 watched this video and had nothing to loose and 16 dollars later this fixed my problem with my blinkers completely thank you so much.

[@Hunterrnorris]

@@WayneMurray-n7k glad I could help!

[@eherexx1965]

I just inherited my mom's 01 1500. (Alzheimer’s and Dementia). It was having the exact problem. Thanks for the Video. It solved the problem.😎👍

[@sharifulton3158]

TY U SAVED ME ALOT --AND IAM A OLDER FEMALE IT WORKED --AND AGAIN UR VIDEO WAS SO EASY TO FOLLOW--MY TRUCK IS A 1999 DODGE RAM so back blinkin safely !!!!!!!!!

[@ChronicSurfer]

I have crazy blinker issues with my 05 3500 and was about to disassemble the steering column to clean out the MFS. Going to try this first. If it works, you’ll save me hours of frustration. Thanks.

[@davidzimmerman7770]

Thanks for the info it worked now I'm turning legally again

[@jacksonmeads1161]

Been turning illegally for like 3 months and this is most likely my problem 😂

[@petesmith5092]

On mine, the left rear brake light and turn signal light would not work. The left front flashed real quick as if it was indicating a bulb was out but replaced the bulbs and did not fix it. Some squirrel told me I had to replace the fuse panel itself, and he was actually a "professional" with an automotive electrical repair business. I myself am a professional automotive service technician and I always check the fuses first then the bulbs and then I get the flowchart out for the appropriate equipment such as the multifunction switch. But the Flasher is what the problem is 99% of the time if it's not the bulbs. Rarely ever is it a wiring issue, unless there's been modifications made to suspension or electrical or other components of the vehicle. In my case, all OEM stock, and in original condition.... great video, I like how you use the high quality standard high grade part. 🍺🍺🍺🏴‍☠️🍺🍺🍺

[@Hunterrnorris]

Thank you, and you’ve gotta stay away from those professional squirrels, they’ll get you every time haha

[@richardcharrois3880]

Can’t believe this worked! Thank you sir!!

[@BbB-m2o]

Buying a new relay fixed it for me thanks!

[@dino_egg_hunter_420]

1000000% it worked for my 2001 dodge ram 1500, thank you so much for this video

[@ToolsandTime]

Awesome vid man! Informative and helpful, thanks so much

[@jesserodriguez9021]

Great. I fixed my flasher and turn signals. Thank you❤

[@randyrichardson8516]

Thank you the advice was very useful

[@fedupcitizen5527]

Nice! 1999 ram 1500 and had exact same issue. Only had to pull blue relay, blew like Nintendo cartridge and replaced.....that did the trick!!

[@Hunterrnorris]

Good deal! Glad it fixed it

[@ajsironworks3937]

Going to try this. Exactly what my problem is.

[@ajsironworks3937]

And it worked

[@orionstanbro1680]

Thank you! wiggled my relay and it fixed my issue!!

[@Avh552]

Omg ! I’m going to try that because O m having the Same Problem. I was told It was an Electrical problem .thank you it o doesn’t fix it you still have some nuggets.

[@MrRico550]

Thanks dude, i just got my 98 second gen and it came with the same issue

[@Mobn1981]

Thank you video worked! My blinkers were out pulled fuse and put air into it n they work

[@Hunterrnorris]

@@Mobn1981 glad I was able to help!

[@Mobn1981]

@@Hunterrnorris much appreciated since these trucks are 20 plus years old!!

[@dustinoutlaw9453]

Working on a 1995 Ram 1500 with 5.9- Crank/No Start situation, back probing TPS I'm seeing voltage on signal, reference AND ground... PCM Not sending signal to CPS, Cam, etc... So I end up figuring out that the black and light blue wire at the PCM, black plug (far right side plug) is the ground for the sensors, I back probed it and realized it is receiving voltage... I was originally thinking the PCM was bad... I ran a ground to the back probe to see if it would show a ground signal on my voltmeter and sure enough, it did... No voltage being shown now- so I tried to start it up... Fired right up... Hopefully this helps someone... Check pins on the PCM for 12v, and for the 5v reference, and for ground- Orange wire, black and light blue wire, black and tan wires are the PCM ground... Also check TPS and see if it's showing 5v signal, 5v reference and anything on the ground... When I ground the black light blue wire at PCM, the ground on TPS stopped showing voltage...

[@jmacojp3689]

Worked for me thanks for the help

[@Hunterrnorris]

Glad I could help!

[@TheMaxi748]

Thanks man this worked

[@GVanBurenHainline]

Awesome job! Thanks.

[@Audited33]

Yooooo it worked! I just blew the blue thing off!

[@dirtyboy8336]

I'll have to say thank you Hunter I got a new sensor A little month ago. Soon as I put the new one in my blinkers start working I almost started to cry of joy because it's been like 2 years trying to figure it out going through the wires checking out fuses... Today I just laugh at myself and say why i did not just pull that fuse out and just replace it😂😂

[@Hunterrnorris]

That’s awesome! Glad I could help, and you sound like me, I usually do all the hard stuff first, just to find out I skipped the easiest solution haha

[@MarioRodriguez-ev9be]

Was yours blowing fuses? Muy truck just started doing. Everything works except if I turn the right turn signal it'll blow the fuse.

[@floyds55ford]

my right turn signal front on my 01 dakota is not working most of the time i am willing to bet this fixes it, thank you.

[@Kaldalus888]

Hey I just have this issue with my back right blinker. Everything else works and bulbs aren't out, already replaced the circuit any tips??

[@432fz2]

Thanks breh!

[@AtwoodBoxing]

I have an 07. My problem is when I turn on my headlights my front and rear turn signals on the drivers don't work. They only work with headlights off. I'm so lost on this one. Any suggestions. The dash flashers work. The 07 has no in cab fuse box and no relays. What can I do?

[@austinmp6]

Thanks man!!!

[@mickichikwinya5519]

Oh my. I hope this my fix!!!

[@ariansolano7561]

Thx you from 2024

[@alphaesca2646]

I am having this same issue with my 1994 2nd gen. I replaced with relays and the bulbs look fine but it still isnt working. issue is with my left turn signal not working at all. any tips?

[@Hunterrnorris]

Have you checked the fuses?

[@lauraronnebaum3510]

Thank you!!!

[@Hunterrnorris]

You’re welcome!

[@tanmetanner6950]

I put those led switch backs on and my blinkers hyper flash, with normal bulbs they work fine. How come yours work fine ?

[@Hunterrnorris]

Did you get my other message from yesterday? I’d try to flip them around, they have to go in a certain way. What year is your truck? Mine is a 98

[@tanmetanner6950]

@@Hunterrnorris lmao I just seen your other message when I got this one. I flipped it around , they work now like they should but have hyper flash . Did you install a aftermarket relay ?? What’s it called?

[@tanmetanner6950]

My truck is also a 2000.

[@julieoliver8170]

My new fuse relay went out almost immediately. Worked for 10 minutes

[@Hunterrnorris]

You might have a bad ground or two open wires touching each other that shouldn’t be

[@julieoliver8170]

I checked all the lights and wires. Didn't see anything.

[@Notarobot310]

Good find, however mine has deeper issues. No brake, hazzards, or dash lights. Left blinker working but the rights hyper flashing.

[@Hunterrnorris]

I’d do the basics at first, check fuses, relays, and grounds, then try looking over the wires. These trucks are sometimes finicky, so hopefully it’s something simple

[@Notarobot310]

@@Hunterrnorris I know right, it’s deeper than fuses is relay so I’m getting wiring information so I’m not going down a rabbit hole directionless

[@kaiju_wastelandr7597]

My 95 ram doesn't have that blue relay

[@Hunterrnorris]

This is a 1998, I know the dash is different in the 95, but you still have blinkers, so you should have a relay

[@Gabrg95]

Thats funny, it worked lol ill probably replace it anyways

[@Hunterrnorris]

They are pretty cheap, it wouldn’t hurt

[@julieoliver8170]

Mine keeps clicking.

[@robertr298]

My hazards flash really slow

[@julieoliver8170]

Mine is constantly clicking when of. Turn signal on it stops. Fff uuuu kkk . Flashers not working

[@juanathompson4935]

This to long to resolve the issue

[@Hunterrnorris]

The video is only 6 minutes? And shows a couple different ways to fix the issue. Sorry the video didn’t help

[@dirtyboy8336]

My Truck is Showing The Same thing I keep saying I think it would work if I replace the old Blue one and see if it work