Exactly what I was looking for to cure the door rattles in my 2001 Tacoma . I despise rattles...and now I can eradicate them thanks to you!
@Tanner731 Жыл бұрын
its been two years, did you end up doing it? I have a 98 4runner I want to do
@InfiniteRiffs Жыл бұрын
@@Tanner731 yep. I did do it. In fact I posted about it here two years ago right below. It did make a difference. Still pretty good two years later. Except the damn lock button vibrates when locked. Haven’t messed with it yet though.
@Tanner731 Жыл бұрын
@@InfiniteRiffs nice, bet you can put some felt or foam around the door lock to dampen it. think thats going to be a project for my 4runner soon
@InfiniteRiffs Жыл бұрын
@@Tanner731 thanks. I was thinking of doing something like that. And yeah it’s a fun little project to do that has nice results, even though you don’t actually see all the work. Just takes time and patience.
@sk-uy4xo11 ай бұрын
finally a guy that actually knows what he is talking about when it comes to car rattles. Thank you so much. Huge thumbs up!
@josetijerino51986 жыл бұрын
why only the owner hear any noises... people think one is crazy .
@StebanHern5 жыл бұрын
Because you are the one driving it daily.
@dushyantkumarshandilya63623 жыл бұрын
😂
@FezCaliph3 жыл бұрын
👌🏾👌🏾
@paralelmind3 жыл бұрын
in some cases even the owner doesn't hear the noises. i have a friend with a car with lots of rattles and I even asked if those doesn't bother him.. and guess what, he didn't even notice the noises. conslusion: perception differs and some are more sensible or not
@amalgotra3885 Жыл бұрын
Hahahaha..been there bro🤣
@WayneGeorge23074 жыл бұрын
I just did the doors on my F80 Bmw M3 using window weld on the clips and Dynamat for isolation. Sooo much better! I am enjoying the car way more without the annoying door rattles. Highly recommend this process!
@Ghustryder4 жыл бұрын
Great video, i followed your directions to a T on my Q50 and all rattles are gone even rattles i heard from outside the car are gone. Starting to really appreciate the 15 Bose speaker system again. Thanks.
@autofanaticcars4 жыл бұрын
glad this video helped and enjoy the audio system now/
@iTank23 жыл бұрын
MAN! I came here because my driver side is driving me insane! And it is too a q50s! So lucky to find this video. Thank you so much, I'm doing this this weekend
@emilyl77462 жыл бұрын
I just bought a new 2022 Camry and low and behold the daggon driver's side panel is rattling when I have the music on. Your video is exactly what I was looking for. SOOOO helpful and something I am going to try. THANK YOU!
@clix翻唱3 ай бұрын
This is the only video I watch without skipping thanks man finally some real car guy showing us how
@jeguzmanramirez2 жыл бұрын
You don't know it, but you are my best friend...!!!! My wife absolutely hates my fixation on eliminating even the tiniest noise in my truck!!! I even ride now fatter tires: 285/70 17 Michelins and Bilsteins with neoprene cushions between the several suspension parts and joints. Greetings from Monterrey, México
@clevelandaeromotive4 жыл бұрын
I’m using solutions you’ve brought up here like 3M Window Weld, dynomat and then additionally, never-dry modeling clay (made video on that) for lightly damaged (cracked) panels. I have an X6 and oh boy! Noisy AF! Not anymore.
@CLoSC2 жыл бұрын
Thank you for this video. It helped eliminate the noises from my driver side door panel on a 2009 Honda Fit. As a side note, I added Kilmat to the metal door. On the removable panel, I applied most of the techniques that were recommended in this video. I used the same tacky gummy black adhesive that I removed from the plastic sheet to deaden and "glue" in place the red plastic clips on the panel and it worked. All the red clips stayed in place and were no longer loose. Will repeat on the passenger door.
@TheGreatBrownBoy4 ай бұрын
Wow great video. I am obsessed with my rattling jeep. And my door panels are a big culprit. This is gold. Thank you so much.
@autofanaticcars4 ай бұрын
Glad it was helpful!
@davidbray65153 жыл бұрын
Did all mine with blue tack works a treat
@Spartan198913 жыл бұрын
Great video, I've been following your channel for quite some time mostly because of the Giulia QV but never expected to find a video that would give me an answer to my issues with rattling. I own an Alfa Romeo Giulietta, and I have rattling noise from the passenger seat door panel. I've noticed that some of the clips are not actually making a good contact so after seeing your video I now have a clear idea of what's the cause. Regards from Athens, Greece
@rizetothemoon7 жыл бұрын
This channel is severely underrated.
@autofanaticcars7 жыл бұрын
Roger Hu thanks help spread the word, just started it few weeks back
@yacinekhelifaoui14624 жыл бұрын
My 2015 Camry drives me crazy. I just foot the sunroof knock fixed and the glove boxe area rattle fixed but still a lot more coming from the back I need to go through it and fixe it.
@cholomackdaddy3 жыл бұрын
I have a new TRD camry. 300 miles so far and shit rattles.
@chriswu38564 ай бұрын
Great video. Thank you for all the tips. Gonna tackle my door panel rattle soon
@autofanaticcars4 ай бұрын
Glad it helped
@chriswu38563 ай бұрын
@@autofanaticcars Finished over the weekend. Worked like a charm. Thanks again for the video. Exactly what I needed to know
@Hyperdrive.Auto__7 ай бұрын
This is an excellent fix, but just curious, will damping sheets have better results?
@mikeluv37734 жыл бұрын
great video! I have a 2019 Honda Accord and the driver door rattles at a specific area, and that drives me nuts. i will remove the panel and follow your advice - thanks
@ophrasbankaccount77162 жыл бұрын
Did you find and fix the problem with the Honda ?
@mikeluv37732 жыл бұрын
@@ophrasbankaccount7716 yes I was able to resolve the issue. Despite the shitty roads we have in Ontario, I never heard the rattle again.
@stephendu56103 жыл бұрын
You saved my life, I was that close to give up my car. Now it is as good as new. Thank you
@autofanaticcars3 жыл бұрын
so glad this video helped you out, happy motoring noise free now
@wildc4447 жыл бұрын
Set the camera lower so we can see what your doing .
@fiftysquiggly4 жыл бұрын
Yeah seriously. As an entire noob to this watching, he's sitting there like "You're gonna put a little bit of this over there, and then put some of it in here" and I'm just like "Over where? Where is here? I CAN'T SEE WHAT YOU'RE DOING BECAUSE IT'S OFF CAMERA!!" lol
@Bettercallsoren3 жыл бұрын
Incredible! Thanks a lot, you gave me confidence that this could be done by myself. amazing work! Land rover discovery 4, 2009 harmon kardon, logic 7, struggling bad.
@LayzeLyfe4 жыл бұрын
Wow, you make it look easy. I will be doing my Q50 now.
@jcs12753 жыл бұрын
Great video! I'm applying kilmat to all four doors of my 2018 Toyota Corolla iM so I'll do the same with the clips. Do you have any videos on finding and fixing seat rattles?
@TheDarvec16 ай бұрын
I'm currently trying to fix a rattling 2014 Ford C-max window regulator. I'm going to try that window weld on the clips that hold the regulator to the actual window.
@zahialhamad18776 жыл бұрын
Thank you for the fantastic demo so thorough
@96radster4 жыл бұрын
You sir are a car fanatic, me too Thanks for the tips and I've shared on Facebook for other car guys who really like thier car to be quiet. Huge Thanks
@autofanaticcars4 жыл бұрын
thanks glad this video helped you out and thanks for sharing. Much more DIY content on the channel check it out.
@tld003 жыл бұрын
Commenting for algorithm boost. Excellent vid
@Dthenn6 жыл бұрын
Bloody hell, this is a good video.
@letbraski6 жыл бұрын
Appreciate your effort and your passion
@tittuspics606 жыл бұрын
Thanks man..I thought I just got the One volvo v40 with a cracking door. Now I know is common on premium brands and the best...fixable!
@Anonymous-ji4sb9 ай бұрын
I was in an accident and they had to remove the drivers side door panel for the repair, it now rattles like crazy. This very helpful, I can’t take it anymore. 😂
@InfiniteRiffs4 жыл бұрын
Well I applied this method to my 2001 Tacoma door panels, which were rattling and squeaking. Pretty simple process, just takes a little time. And he wasn't kidding about the clips rattling around in the door panel. They don't rattle after using the window weld!
@Zaque-TV2 жыл бұрын
I'm going to try this in a few days. The bass in my car has been driving me nuts with the driver door buzzing. I'll update this comment when I do it!
@user-vj9qz3br6l3 жыл бұрын
This video is gold-thank you
@LukaDaudt6 жыл бұрын
I'd kill to be your friend haha.. Texas needs you!
@autofanaticcars6 жыл бұрын
funny you say that Texas is on our radar to relocate very soon, considering TX and NC, watch some of my other videos. AF
@MrKadillon8 ай бұрын
I very much appreciate this video. But are there any issues with being able to remove the door panel in the future after the window weld has been applied to the clips?
@autofanaticcars8 ай бұрын
No issues for future service the materials stay pliable for years
@justinp39316 ай бұрын
It's not just the noise but window,tilting in mirror and even lock. Basically cutting off electronics for that door on a 2016 Buick Escalade
@clevelandaeromotive4 жыл бұрын
If you own a BMW X5 or X6 this video is gold. Those cars ALLLL rattle and creak. Especially their hatches.
@MahlmeisterTV6 жыл бұрын
2 Questions: 1) Does using the window weld on the door side of the door panel clip (shown at 19:54 of your video) make it harder to take off the door if I need to remove it again? I understand using the WW on the panel side of the clip, that isn't meant to come off...but the clip is supposed to pull away from the door and it seems like the WW will cause this to be more difficult. 2) Do you recommend putting some window weld along the top channel that slides over the door near the window slot? I have a Toyota Sienna and the door panel hangs on the edge and I suspect it rattles around on that surface, but much like question #1, I am concerned that using the WW on that junction will cause the door panel to be difficult to remove from the door later.
@twofoureights6 жыл бұрын
thank you for the informative video. my wife thinks im too 'critical' when it comes to the rattles...
@gav240z4 жыл бұрын
Rattles drive me nuts! Ruins the feel of the drive.
@Andrewkosche3 жыл бұрын
divorce her
@justinmetson33062 жыл бұрын
Hi, great video and advice. I'm suffering bad with my mk7 fiesta with the rattling. I thought at 1st it was my tweeter's blown so I replaced them but still bad rattling. 😮 So I'm going to give this method a go later on. Just wondering, do I need to put any deading sheet behind the speaker itself? Many thanks.
@nagendrasharma23315 жыл бұрын
Nice vedio.....love from India....keep it up
@Assurraa4 жыл бұрын
Wish me luck! Gonna try this with my 2003 Silverado, damn subwoofers makes everything rattle in the poor thing haha
@You-wo9su4 жыл бұрын
How did it go? I’m planning on trying it as well on my 2000 Camry
@noahcrooker45263 жыл бұрын
@@You-wo9su 06 gmc that I’m gonna do soon how’d it turn out?
@You-wo9su3 жыл бұрын
@@noahcrooker4526 I took the door apart and found that it was actually my shitty 2000 cardboard speakers that were rattling. I bought a $100 kit online with all the speakers in the car and paid for someone to replace them. Good luck to you though man!
@dennisbird59013 жыл бұрын
Great advice. The rattles in my BMW i3 make it sound like a cheap junker. Will definitely use these techniques. Thanks!
@deseremere5 жыл бұрын
Thank you, very informative. That's exactly what I have with my CRV - rattle box that drives me nuts. You may want to add the door lock parts to your list, the steel connectors may rattle a lot with no easy way to silence them
@jordanriffic23596 ай бұрын
Did you get any solutions to this?
@WaiWaiSzeto4 жыл бұрын
Great video! I have a ticking noise in my 13 ml 350. Sometimes it does, sometimes it doesn't. Any tips how to trace where the sounds coming from?
@elterrible00esb4 жыл бұрын
have someone else drive your car around so you can sit closer to the source of the noise. If the noise is recreatable (example rattles when certain songs play at just the right frequency) then try to push down on the trim pieces at different points to see where its coming from.
@jdmcars-lt64995 жыл бұрын
Nice vid man. Ahh u should make video how to sound deadening door shut. Have different types of sound deadening but just dont know where to put them to make door shut quiet
@Nitrous82 жыл бұрын
thank you for the video, I just wonder if you watched your video before putting up, most of the time we cant see what your doing
@jivanescalante-garcia88412 жыл бұрын
Thanks for this great video!, shame the camera was pointing upwards missing most of the important action.
@Maxfli823 жыл бұрын
Thank you. I also have a door rattle caused by my dealership last time when they try to fix a window issue. Do you think it’s better for me to bring it back to them and risk something else going wrong. Or just pay out of pocket at a body shop. Do body shops even do things like this?
@rizocars61156 жыл бұрын
bro you are putting gold info out, subscribed right away !!!!
@paralelmind3 жыл бұрын
Hi! No need to soundproof the metalic layer on the door?
@chriscarpen7867 ай бұрын
I have a Mazda3 with Bose speakers in the front doors. When the bass hits, the doors rattle. Does this help with removing rattles from the bass?
@freshmilk9805 жыл бұрын
Gonna follow this video for my door panels … any tips on doing the headliner/roof near sunroof? That rattles real bad on my car and it's driving me nuts O_o
@HerodiasM4 жыл бұрын
2019 VW Tiguan with an intolerable rattling (like a screw is loose inside the door) that, of course, the dealership does not hear and thinks I am crazy for noticing (it can only be heard around 35+ mph)
@selineey4 жыл бұрын
2020 Terrain Denali doing the same thing when my speakers hit bass. It's INFURIATING!
@_anthonyr4 жыл бұрын
Very useful. Thank you for the video. I'll definitely do this for my Q50. I love the car but the rattling drives me crazy lol
@Viking742566 жыл бұрын
Great ideas and video!! My older Chevy S10 Blazer has metal rods and linkage for the locks and door handles. Any tips or ideas for reducing rattles and vibration on these?
@autofanaticcars6 жыл бұрын
Scott Wieben cover rods in rubber vacuum hose 👌
@Jstatham19795 жыл бұрын
Just wanted to say thanks for this video, just used ribbon to fix my door....great job here
@cmambro53 жыл бұрын
There should be a support group for guys with cars that have rattling / buzzing sound. My Mercedez Benz 2018 GLC300 has something loose in the back door driver side (right behind my ears) and it's driving me crazy. It's making my speaker's buzz. My wife doesn't hear it. Dealer has looked at twice, can't fix it. I either sell the car or try this. Good video
@julmerose3 жыл бұрын
Thanks for your informative video!!!
@dlaroc6 жыл бұрын
I have the rattle from music but it’s the window. If I hold the window up button, it goes away. I roll the window down. Gone. But when window is up, it makes the rattle from the bass in my music.
@aceinthehole_tv48985 жыл бұрын
Maybe the window runner is loose
@FreshTillDeath563 жыл бұрын
@@aceinthehole_tv4898 i think thats the problem with mine
@LukasDozer Жыл бұрын
I have just the door lock pin rattling on the drivers side. 2017 Chevy Cruze Premier. Do you have any suggestions of what I can put there without disturbing the function? Thanks.
@robjames38646 жыл бұрын
Good video.. thanks
@GlobalGreenPower3 жыл бұрын
REALLY helpful!!. Thanks
@asmrKeeper-si5mp Жыл бұрын
I have a Fcosport 2015 and the driver door it seriously annoying because it rattles a lot i was told that i will pay a lot to get it fix. Can i please get the details of those stuff that you use for fixing the door rattle? It will be a big help to me😢..
@doubleatube3 жыл бұрын
The passenger side door panel on my new car rattles whenever I go over bumps. It's driving me nuts.
@ananditverma71303 жыл бұрын
Which car ? And is it resolved now?
@Gamingpro-vz1dm3 жыл бұрын
Where are you located at in tx because I need to hit you up to fix my door rattles on my new 2021 Elantra
@justinp39316 ай бұрын
A car,I might add that we just got but that's the only issue. We do have extra insurance if anything happens but don't know if that will even cover
@Psilocy-ben3 жыл бұрын
Great video. Need to do this on my GX470. What’s the difference between the 80 mil sound deadener and the dynapad? Do you recommend getting both? Also, so it’s better to put the sound deadener directly on the plastic? I always thought it was meant for directly on metal.
@mr.anderson45714 жыл бұрын
lmao at 21:45 when you start smashing the door xD idk man it sounds like you're damaging it just a LITTLE bit.
@chriscarpen7867 ай бұрын
Quick update: for my Mazda3, I need to cover as much of the door panel with Kilmat because it's hard to tell where the rattle is coming from. I did this the 1st time and will have to go back and do it a 2nd time because I'm sure there are a few areas I missed. Mind you, I covered about 80 to 90% of the door panel. These car companies need to do a better job
@tkmsound5 жыл бұрын
On the clips , did you use the 3M liquid or the ribbon? Also what did you end up using the ribbon for if not the clips?
@danielboccia5 жыл бұрын
See you've listed/linked Dynamat as well as Noico sound deadeners... do they have different applications or just two options for the same application?
@MrTimjin5 жыл бұрын
I am wondering if blue tack can function the same way as the Window Weld?
@autofanaticcars5 жыл бұрын
no
@MrTimjin5 жыл бұрын
What the differences make Window Weld a better choice than Blue Tack? Thanks
@ItsCamplicated3 жыл бұрын
So I’m new to this stuff, I have a Subaru Crosstrek with mid-woofers in the front door panels, I had my local audio shop put in some sound proofing materials in certain spots. It helped in many cases, but now I noticed the actual plastic door frame (like where you rest your arm) rattles pretty bad when the bass hits. Can I apply these kind of materials to the plastic part as well? Instead of the metal door frame?
@patlainesmith56682 жыл бұрын
Have o7 ford focus left side in 3 times little bit better tune up checked under..balance tires but when ideals it shakes drive slow.. faster not so much..
@fh34862 жыл бұрын
Recently my wife's 2017 sienna passenger's door is rattling when stepping my gas. I hit the door and it goes away and comes back. It's about 30 degrees here so I think cold whether has something to do with that
@berukteklemariam5854 Жыл бұрын
Is there any other option for the 3M liquid weld the 3M seems to be expensive. Is there like any other replacement that does the same thing
@autofanaticcars Жыл бұрын
use 3M because it is the absolute best anything that is a knock up is not the same.
@FlightHours3 жыл бұрын
Any advantage to getting the thicker 150mil Noico? It's cheaper than the 80mil on Amazon right now. (Thank you for this explanation - new 2020 Subaru WRX driver side door is buzzing from certain bass frequencies even at low volume. Ordered Tesa Tape for the wires, will get the Noico wetsuit material for the paneling.)
@calartian854 жыл бұрын
Was hoping you’d address a buzzing window controls / door lock cluster. It rattles in its place when the radio is on. If I press on the door handle or the control cluster I can arrest the rubbing. You talk about isolating panels with tapes and caulks...what about lubing? Like a dot of silicone lube flooded into the contact zone?
@luciafeeney55534 жыл бұрын
Great to know, my Infiniti has the same problem in both front doors. So sick to hear the noise.
@adenbaksh48434 жыл бұрын
Lucia Wang does it make that noise when the music is too loud ?
@ivarb6293 жыл бұрын
If I were to hire someone to do this for my Ford fusion sport, what should I expect to pay? And would I find this person at an audio shop or body shop?
@deapozol Жыл бұрын
Are you in Chicago?
@y_m_20252 жыл бұрын
Hi Brother, I am in Riyadh and own a Honda Accord Coupe 2008. I have lots of rattling sound in my car. Specially from the back. Subwoofer also sounds bad. Please do advise me how can I open its door from top to bottom? for the rear portion, lots of cracking sound comes, can't figure out the reason.
@Queenie3366 жыл бұрын
What would you use if the door skin is rattling on the door it’s self? It’s come unglued just a little?
@LasdilElizaga5 жыл бұрын
is there a video on how did you remove and seal the door clips? they seem to be fragile and one of my clip has already cracked when i removed the door panel
@jannercaicedo27474 жыл бұрын
awesome video thanks Man!!
@inaeemk3 жыл бұрын
I have QX60 and feel like a bolt drop in the back door I opened the panel but did not find anything in there but noise is killing me.an suggestions ?
@cemilcam3 жыл бұрын
can you name any other brand for 3M uretan? which material I can use for another option to stick the clips? Thx
@davidcohen53003 жыл бұрын
GOOD ONE VERY PRO!!! TNX
@m2ugu8246 жыл бұрын
Ow! Great video! Really appreciate your time and effort here. It helped me with my problems on the car. If you have any tips about the wind noise on the q50 from 2014 please let me know. Thank you.
@pepino7358 ай бұрын
good
@wjwitt3 жыл бұрын
Great video...need to reposition the camera
@rezasyahzan5 жыл бұрын
Can I use a silicone window sealant instead of 3M's Windo-Weld? Or it wouldn't stick? Kinda hard to find 3M Windo-Weld around my place.
@autofanaticcars5 жыл бұрын
no window weld is the only solution
@shuycg3 жыл бұрын
Definitely put some soundproofing sheet inside the door itself.
@JohnSmith-es8lj6 жыл бұрын
thanks for input !!
@charleslastname85872 жыл бұрын
Get some hard wax (crayon, candle, etc) and shave off tiny little pieces with a knife or anything sharp. Look for every clip or screw that have some play in them and heat it up a little with a heat gun and apply a little bit of the wax in between. Don't add too much where it might run when it gets hot, add just enough to give it a thin layer.
@autofanaticcars2 жыл бұрын
wax will never isolate as good as the 3M window weld I show in the video