How to fix 'Drift' Issues on your Logitech Flight Yoke System!

[@Sy-T007]

Wow thanks, I've always assumed this behaviour was normal, I just correct with rudder. Can you help please with a different issue? My yoke becomes unresponsive after a few minutes into the flight, it'll come back on again when I unplug and replug the USB but would crash the pc at other times. I also have not been able to install the driver as the auto os detection on the website is only giving me the 32bit installer. I get the error message, "the installer is a 32bit find the 64bit and install" or something like that. Its been working fine for the past 3 years I've bought it, just started with the UK update of MFS2020

[@Huddison]

I'm not sure on the top of my head what might be causing that, but will research deeper into this for you - for now I'll pin your comment to see if others can help :)

[@Sy-T007]

@@Huddison thank you so much, its super frustrating

[@bikerboy3k]

Bro, ive gone through pretty much every brand of yoke in the past 2 years lol and any problem you can imagine, ive got a folder and several subfolders on my desktop full of installers, drivers, and notes on how to solve a myriad of issues, hopefully we'll fix yours too. What yoke you got ? Saitek/Logitech one like in the video above ?

[@Sy-T007]

@@bikerboy3k its extremely frustrating, although my issue maybe amd usb power drop off which amd has been investigating for a while now. Hopefully they come up with a fix soon. My yoke is the exact one as in the video

[@bikerboy3k]

@@Sy-T007 is it showing properly under "set up USB controllers"?

[@KaptanKlutz]

I've been getting super frustrated trying to calibrate my system. This was god send, thank you so much for creating/uploading.

[@Huddison]

Glad it helped you.

[@spartansnyder]

It’s like a brand new yoke. Thank you. I’ve been dealing with this for the last week and was about to send it back.

[@Huddison]

Great to hear it's helped.

[@sarahantin2106]

Huddison, I think I love you for this help. Thanks from Arizona.

[@Huddison]

Happy to help :)

[@mrg7858]

Thanks for this video. I'm new to MSFS and just purchased the Logitech yoke. Mine suffered from the right drift issue you show in the video. I'm a fan of Logitech keyboards and mice, but feel their support for the yoke is lacking. I never would have found the adjustment panel without your video. Thanks again!

[@Huddison]

Fantastic, Happy to hear it helped!

[@ErikFigueroa]

I get my flight yoke tomorrow. Thanks for helping me troubleshoot any issues before they crop up!

[@Huddison]

Enjoy; it adds much to the immersion in FS 2020

[@bluecrayon007]

You’re the best. Now my plane isn’t trying to nose dive whenever I fly it. Thank you!!!!

[@egecarsi]

You sir, you are genius! Im trying to solve this problem but only fix i could find is plug in and out yoke to center again. Thank you so much!

[@Huddison]

You are most welcome my friend!

[@michaelbowen5748]

Wow awesome been correcting this issue with rudder for a year now thanks for the video

[@ralphconnell8163]

Thanks... Finally just got this yoke today...installed the data,, still to set it up (X plane and FSX SE) Your vids have been helpful. This one will stoop me wondering..."what the ...?"

[@Huddison]

Great to hear Ralph, on both accounts ;)

[@leerabson4693]

Thank you so much for the quick video Huddison. I only posted the comment yesterday asking about this and already you've uploaded a video, amazing. I will be giving this a try.

[@Huddison]

Let me know how it goes.

[@leerabson4693]

@@Huddison Ok so i changed my deadzone to copy yours from the video you made and that made a big difference to my yoke and i like the feel of that. Now, i went into the device settings menu for the yoke and noticed the red line on my axis were lining up perfectly without needing to change it; it wasn't flickering, so since then i have had zero issues and my experience is a lot better. Now, i've been thinking about why it would suddenly correct itself without needing to adjust the sliders in your video here, and the only thing i did differently was that i plugged my throttle quadrant into the yoke BEFORE i plugged the yoke into my PC usb. I'm wondering if plugging the yoke into your PC first and then inserting the throttle into the yoke somehow interferes with the yoke calibration. All being said i appreciate the vids to solve any issues going forward should i need to correct thing

[@Huddison]

@@leerabson4693 I shall give that a try myself. I actually feel that the current desk I'm using is not level ( I can almost visually see it), so bearing both options in mind.

[@johncrichton4341]

Hey Man - many thanks for thus video - I've been having to unplug and plug in the yoke after a PC restart to reset the centre point but after seeing your video it's now fixed!

[@Huddison]

Great to hear!

[@GG_Booboo]

Thank you so much! I thought this was just an annoying thing I couldn't control! My yoke control has gotten better as I tune it as per your video recommendations! :)

[@Huddison]

Glad it helped! :)

[@diamond4829]

You nailed another one for me !! Thanks for taking the time to demonstrated the fix !!

[@Huddison]

Glad to help!

[@Greazer13]

Thanks man! I thought my yoke is broken or something! Glad I found your Video!

[@Huddison]

You're welcome!

[@brucedavidson55]

Thank you, I knew I had the problem, but did not know how to fix it. Just adjusted my settings as you said, works perfectly now

[@Huddison]

Happy to be off help👍😊

[@sinjin_smith]

in Windows 11. I found my yoke under more "more devices" even though the yoke was properly identified on the normal page. In the "more devices" I was able to calibrate it like you show here.

[@pks15032]

joy.cpl brings it up too. My problem is my tabs are settings and test. Settings lets me calibrate but it associates throttle and pro in the calibration and not any of the yoke options one axes does nothing on any part.

[@pantsgaming759]

thanks i couldn't find it until i read your comment

[@justflightsim503]

This is really helpful and i was finding this problem really frustrating. Will give it a go now.

[@Huddison]

Hope it works out for you!

[@tdelorean2071]

Huddison Thank you so so much! This was what i was looking for ! You made my day ! i know they always drift because of the torque "i need this working i am in the middle of my PPL " so thank you now i can go on and practice some procedures. THANK YOU !

[@Huddison]

Wow great to hear it's helpful to you; Goodluck with your PPL🤞

[@tdelorean2071]

@@Huddison Thank you !

[@hardwaybets]

Thank you! This was the video I was looking for to solve my drifting to the right with my controller. Cheers!

[@Huddison]

Glad it helped!

[@Andy27900]

Thankyou it fixed my issue, the twinotter is now flying better also Happy flying -Andy2790

[@Huddison]

That's great news Andy

[@jeanmarcscognamiglionardel4785]

A good idea I have an other: if you have been using your yoke for several years. Open it and clean the potentiometers with electronic component cleaning fluid can correct all problems.

[@Huddison]

Brilliant tip👍

[@collinmc90]

ahhh yes used to have this problem with an old joy stick this always does the trick but it is unfortunate when it happens.

[@danielalbrecht8875]

Good advice, many thanks !!!

[@cokeandtwirl]

Wow, my exact problem and this has saved me hours looking for a solution!!

[@Huddison]

That was lucky then ;)

[@cokeandtwirl]

@@Huddison indeed! In my case there was a tiny offset but it made a difference! Annoying you can’t actually calibrate the yoke for some reason best known to Windows.

[@Ginga_cs2]

You are a hero!🙌🤩

[@Huddison]

Good to see this is still useful.

[@DKT1st]

Thank you very useful info. Corrected my drift.

[@Huddison]

Glad it helped

[@nikhil-q9j6v]

Awesome, thank you so much for this. I noticed I had the same exact problem! Do you have any videos about playing with the sensitive settings? I find sometimes I need more or less sensitivity at certain situations. And the settings confuse me so much.

[@Huddison]

Many videos on Yoke and other sensitivities - check through my Guides and Tutorials playlist ;)

[@NamAir]

thank you for this, I will try with my yoke system tonight and report back!

[@Huddison]

Yes please do!

[@marcustulliuscicero3790]

Well how was it

[@anthonym1625]

@@marcustulliuscicero3790 yes cheyi vor

[@SouthernMinnesotaOutdoors]

Thanks but now it going up by itself have any solutions

[@Huddison]

You could try this: kzbin.info/www/bejne/rnuph6tsjMankNU

[@lsgallo]

Thanks for the tip on how to correct the deviation. Despite having been published 4 years ago, it is always current. One question: do you use modes 1, 2, 3? How do you make it work with FSX?

[@Huddison]

From memory: FSX does not have separate profiles, Like FS2020 does, so switching between the modes lets you have different bindings for each mode.

[@lsgallo]

@@Huddison tks. I will try it.

[@countyliving]

Just what I needed great video

[@captainzaurcabarov]

Thank you so much it was very helpful!

[@mattevo13aus]

Thanks champion. Helped heaps

[@ThomasGrillo]

A friend got this yoke a few days ago, and it appears to have a fault. It's not being recognized. He did order a replacement, but haven't heard back, regarding the new one's functionality. Have you experienced this problem with this product? Thanks for the tip.

[@Huddison]

Mine was Plug & Play and usable from day one - I've heard stories of others having difficulties though.

[@ThomasGrillo]

@@Huddison Ok, thanks. :)

[@stephenbrown213]

Thsnk you for this!!! Excellent solution!

[@Huddison]

You're welcome!

[@jrz14848]

I've had the same problem with my yoke except it always goes left, for some reason unplugging it and plugging it back in centered the X axis.

[@BigVigo]

Thank you!

[@TheLeelo123]

thanks so much for this vid, deserves a sub

[@Huddison]

Thanks for the sub

[@Airside98]

Thanks for that,much appreciated!

[@Huddison]

No problem!

[@justinv6586]

Thanks for this solution!

[@Huddison]

You're most welcome

[@omri1901]

Thank you !! This was helpfull

[@Mumtazg13]

Thank you for the tutorial, I go properties but there is no deadzones? What could be the problem.

[@Huddison]

Thanks for your kind comment 😊. Rewatch this video and see if have somehow skipped a step (it can happen): if you haven't, maybe try your yoke in a different usb port and try again.

[@Mumtazg13]

Found it, my problem was i did not download driver of the yoke now it’s perfect 👌🏻 you are making my game much enjoyable, thank you so much :)

[@markgilbert6213]

In Windows 11 - Run joy.cpl from start also. Thanks for the tip!!

[@Huddison]

You're welcome!

[@Brandon-hv9uk]

Great video, but when I go into game controls and open properties I do not see a dead zone option

[@Huddison]

Are you seeing calibration instead? Some Logitech yokes do that.

[@tonyhughes2686]

so helpful as always thanks

[@Huddison]

Thanks.

[@nicklunn4912]

Great Video Thank You

[@filipeparanhos]

Great, very helpful!

[@Huddison]

Happy to be off service 👍😊

[@gastongeler1050]

Nice! what version of the yoke driver are you using and where did you download it? i'm trying to get the clock working on my yoke, however my driver is not showing the clock configuration options as yours....thanks

[@Huddison]

I'm just using the default Windows 10 drivers currently, as they seem to work just fine for myself. What clock configuration/options are not showing for you?

[@gastongeler1050]

@@Huddison It doesn't show me the yoke's clock option to set time using computer as source. It's 00:00:00 all time. For some reason I was using Saitek drivers, so I found this Win10 64bit driver for my yoke that allows me set it up correctly, so now clock's yoke (the green one in the middle of the yoke) it's working perfectly using computer's time as source. Here's the link forums.frontier.co.uk/threads/saitek-pro-flight-yoke-windows10-64-driver.401117/

[@Huddison]

@@gastongeler1050 Fantastic, great to hear you've managed to get it working for you!

[@daveflounders6757]

Thanks. I've been struggling with this for a while. On another subject, How do you get the transparent effect on the attitude gauge?

[@Huddison]

Thanks. It's been a while since I recorded this video - which transparent effect are you referring to?

[@daveflounders6757]

About 1 minute into the video you are running down the runway and you can see the centre runway marking in the attitude indicator

[@RSfandude]

Gonna try this tomorrow, thanks!

[@Huddison]

Hope you enjoy!

[@ralphvest5335]

Thanks my flight system just came in today and I had this drift problem

[@Huddison]

Glad it helped😊

[@Karan88]

Why is the plane not trying to yaw left due to slipstream yaw when the yoke is centred?

[@Huddison]

Explain more

[@Karan88]

@@Huddison Well when you fly a plane for real, and you fully open the throttle (max power), planes with a prop on the front in the middle creates a slipstream effect. The slipstream air will hit the left side of the rudder causing the plane to yaw to the left. This is why you get nagged with "right rudder, right rudder, right rudder" :D. You can google Left-Turning Tendencies of an aeroplane or slipstream yaw. It might explain it better than I can.

[@nzwoody]

cheers for this, have the same issue. i haven't checked out all your video's yet, but do you have a fix for level flying (up - down ) in msfs, mines all over the place...... lol. cheeers. p.s i've set pitch up/down to one of my buttons on yoke, but still can't get level flight

[@Huddison]

It might be difficult for me to pinpoint your issues in the comments; but come and join the Discord - you'll have a whole host of willing people, waiting to help you there: discord.gg/3kra6JfHZT

[@nzwoody]

@@Huddison cheers, will check it out

[@wvijay]

Thank you for that Video. Nice work. Regards

[@Huddison]

Thanks

[@nigelmorris4769]

I have this problem but I don't have a dead zone tab in the controller settings

[@Huddison]

It seems some do, whilst others don't - not sure why.

[@nigelmorris4769]

In my control panel the settings are correct but in the flight sim , I check sensitivities and the center dot is on the left hand side.. so as soon as I take off the plane banks or turns fully to the left...

[@derrobi3809]

Thank You for Help. 🤙🏻

[@Huddison]

No problem 👍

[@DarkGT]

Maybe if the steering is heavy and your table is not level can tilt that could be also potential issue. Most likely not, maybe just faulty like ps4 controllers after some use.

[@Huddison]

I hadn't though about that, you might have a good point!

[@robertfeal-martinez3065]

What is odd is when I go into control panel and click on my controller there is Settings & Calibration but not dead zone. Why would that be. I am using latest version of Windows 10.

[@Huddison]

I've not installed drivers for my Logitech yoke; so perhaps they have an influence on what options appear to you.

[@robertfeal-martinez3065]

@@Huddison Neither have I installed drivers, so my should be the same as you. Oh well good old Microsoft.

[@paradoxzero1984]

I go into Flight yoke system properties and the tabs I have are settings and test. I have no deadzone tab. What should I do? (I have windows 10). I go into calibration but it says 512 for both so I think it is centered yet I will still drift to the right and down some. It looks like the deadzone isn't active or something because no matter how I turn, it will eventually begin to drift again. I've also tried spraying pressurized air inside but it also doesn't help.

[@Huddison]

The deadzone tab shows for some and not for others for whatever reason. This video may help you though: kzbin.info/www/bejne/rnuph6tsjMankNU

[@twid5097]

I did this video and it worked amazingly for DCS then I went and put WD-40 because it was sticking and that deleted all of my drift so it would send me over to the left and crash me so I had to kill all of the dead zones LOL but seriously add some lubricant or oil it says it in the user manual and it is certainly worth the try.

[@H3nles]

You are a hero

[@Huddison]

Thanks

[@Jv_R6]

I need help. I uploaded Xplane 12 and did calibration for the yoke but once I am about to take off my yoke does not work.

[@Huddison]

I don't own X-Plane 12 unfortunately.

[@dogukanakyalcin]

You are fantastik bro i will sibsvribe you because you solved my problem

[@Huddison]

Fantastic - thanks!

[@CreepypastaGerman]

I have the same Yoke but my devices thing doesn't show me the deadzones. Wtf am I doing wrong?

[@Huddison]

Does yours have a calibration option?

[@donaldordish5966]

I have windows 11and in control panel under devices, my yoke system doesn't have the deadzones box. Also the calibration isn't working properly. Any solutions please? Don

[@Huddison]

Hi Don, I can't confirm how Windows 11 affects the yoke, as I'm still using it under Windows 10. I know there was a recent discussion about this in our Discord, if you want to check there.

[@abotoohy]

my problem in the Right & left Radder i dont know what is the best way to go left and right on the ground

[@Huddison]

I just use the yoke as rudder on the ground; far from ideal, but it works for now.

[@abotoohy]

thanx for answering. yeah this what i used to do. but after the last update it didnt work. i have to use Enter + Zero botton to lift and right. and when i changed it to the yoke it worked even when i am flying. sorry for my engish.

[@Huddison]

@@abotoohy I'll check this out when I'm back home tomorrow

[@Huddison]

@@abotoohy My yoke still works as Rudder on the Ground - do you have your Flight Model set as 'Modern'? Also with the A320, I can only steer on the ground at low speeds. Having 2 flight controllers plugged into your PC at the same time, can also be problematic.

[@abotoohy]

@@Huddison omg i understand now.i changed the ' Assistance ' to Hard. when i changed it to easy it works well. Thank u so much for ur help& ur time

[@Paradyski]

Many thanks

[@Huddison]

Glad it helped

[@Paradyski]

@@Huddison Yes, I was just about to throw away my Saitek, it was so bad :) Thank you again

[@Huddison]

@@Paradyski Another yoke saved 😃

[@Dropout_Games]

why doesnt my pc doesnt have the deadzone option in control panel?

[@Huddison]

It seems that some do & some don't.

[@HyperFlie]

Heya man, I'm trying to do this. I have the same yoke. When I try to go and open the properties from game controllers that window simply closes and I do not get any other window such as the one for the calibration.

[@Huddison]

It seems to be different for many people - I don't know why.

[@alebarbosa_env]

Useful! helpful stuff!

[@dgstudios6223]

when i try this is doe not allow me to see those settings :(

[@Huddison]

Did you install a driver for your yoke? I haven't so perhaps that is the reason (?)

[@thefallenrift1705]

I have an issue where something the yoke will just turn off, but I look at the controller settings it’s not off, the game just stopped listening to it, any ideas?

[@Huddison]

Only thing that comes to mind is a faulty USB port or connection.

[@eron-youtube]

Thank you verry much

[@Huddison]

You are welcome

[@zeffmetu]

There is no deadzone optioj on my windows interestingly just “test” and “settings” which is only for calibration

[@Huddison]

Hmm that's interesting. Did you install a driver for your yoke? I didn't.

[@zeffmetu]

@@Huddison nope i also didnt install anything just connected via usb. Maybe its already an updated driver on windows and they removed that part. Are you still have that deadzone tab available for u sir?

[@Huddison]

@@zeffmetu Yes the deadzone tab is still available for me. Not certain what's going on with your own - but we have quite an active channel, so someone passing through the comments might be able to help👍

[@zeffmetu]

@@Huddison if its still available then there is hope=) let me dig in to that driver part and lets see if i can also figure out. Any help is welcome meanwhile and tx for the videos they helped a lot

[@jonathanh5789]

I had the same problem at first, but after I´ve installed the driver the deadzone tab appeared. But the calibrate tab sadly disappeared

[@leechurchill8244]

Cheers Ya legend!!!

[@barbaros7377]

Do you have a fix all my buttons don't work 😥

[@IndianArma]

on the runway you need to give a left rudder correction to counter for p factor, and that has nothing to do with the aileron as you have no aileron authority until your speed builds up to at least 70 to 80 percent of your V!.

[@DeepWebDiary]

DUDE THANK YOU SO MUCH!

[@Huddison]

Glad to be of help!

[@DeepWebDiary]

@@Huddison I appreciate your work. Have you shared this on the Microsoft FS site? If you do, I can almost guarantee you will get way more views. The drift issue causes the autopilots to not work. It always disengages because of it for me but this fixed the issue.

[@Huddison]

@@DeepWebDiary I'll look into doing that thanks. There's also a kind of 'reset to factory default' workaround - which some say is even better; might well be doing a video on that too!

[@DeepWebDiary]

@@Huddison nice!

[@LucasChin-dg4ft]

Could you do a windows 11 version?

[@Huddison]

I'm intending to do that.

[@Talon-]

Found a fix. Search RUN in windows search box, then type shell:::{A8A91A66-3A7D-4424-8D24-04E180695C7A} This will open the original windows 10 devices and printers in windows 11 and you should be able to fix

[@jabyho1094]

When i go to the game controller settings, there isn't any tab that says deadzones. It is just settings and a calibrationt tab. I keep trying to calibrate it but a deadzone tab doesnt show up

[@Huddison]

It seems some units have the tab and others don't.

[@aviationgod7773]

My yoke is straight in real life but the game thinks it is turned too the left how so I fix that???

[@Huddison]

Is it still driting after trying the fix in this video?

[@aviationgod7773]

@@Huddison I fell asleep in the middle in addition I am very confused on the screen it shows the yoke tilted to the left when In real life it is straight I am wondering if I messed something with the little buttons. Can I DM u on Instagram and can we do a video call?

[@Huddison]

@@aviationgod7773 Nooo I'm not setting up instagram (or anything similar), I'm a fairly busy guy. Watch through it again and drink lots of coffee next time 🤣👍

[@aviationgod7773]

@@Huddison lol I don’t drink I think it has to do with the yoke itself

[@Huddison]

@@aviationgod7773 Re-watch is all I can advise, it does help with the drift issue.

[@jinhoove]

Thank you! I am encountering a slightly different problem. As I steer to the right my yoke doesn´t react since I have tilted the yoke for about 10°. I think it is a hardware issue but maybe some of you (or you, Huddison) have an idea on how to maybe fix that. :( Its not that funny to have to steer more to the right than to the left when flying...

[@Huddison]

I can only think that it's way out of calibration; there is a fix on youtube, requiring deleting or altering of Registry files, though I've not tried it myself yet.

[@jinhoove]

Tried it but didnt work.. maybe trying it again.. thank you anyway for the answer!

[@Huddison]

@@jinhoove Let's hope somebody else has encountered a similar problem and can help you.

[@peterusher1964]

1: I'm using Win 11 and the calibration for this device looks completely different 2: Have you loaded the drivers that Logitech supplies for this yoke (& rudder) ?

[@Huddison]

I have not downloaded drivers & I'm using Windows 10. Perhaps our Discord might be able to help you out.

[@1984nighthawk450]

ok so firstly this is normal for propeller aircraft! it isn't drift its torque from the direction the prop moves! However the Logitech pro flight yoke does have an issue with the USB where only the ailerons will slightly be out of alignment and the only way to resolve it is to unplug your USB and plug it back in.

[@thanhsontranv2607]

Hi. Can you explain about mose 1.2.3. And how to use this mode?? Thanks…

[@Huddison]

The modes used to be useful (somewhat) in older sims like Flight Sim X - not so much in MSFS as you can just create profiles for different aircraft etc.

[@miguelin96]

which is your sensitivity config?

[@Huddison]

Check out this video of mine: kzbin.info/www/bejne/fnfaZWOIa654f7s

[@seca0815]

Hey i have exactly the same stupid Problem. It must be an error from the THing

[@Huddison]

Yes many others seem to have similar issues

[@seca0815]

@@Huddison OMG you helped me so much. My zone was more to the left then yours. lol. Now i have setup it but little more and now it works perfect. I thought my Stick was build wrong. Thank so so much...

[@Huddison]

@@seca0815 Pleased to be of help 😊

[@sebastiancreque2068]

For some reason when i acces my game controller settings it doesn’t appear a “deadzone” option

[@Huddison]

It seems that some unit show it and others don't.

[@Choedron]

Thanks. But please keep the camera steady in the future.

[@probman12]

Any idea what mode button on Logitech right grip do?

[@Huddison]

Prior to MSFS 2020, it would let you switch between different button setups/profiles. You can simply do that in the MSFS Controls Options setting now.

[@gammaraider]

I have this issue with the pitch. I keep having to adjust the trim every minute or so but eventually that’ll max out and i’m not able to keep on flying. I’ll check this method, thanks! Also, i don’t know if anyone else has this, sometimes when I make a turn, the yaw will suddenly shoot to the maximum and stay there, sending me into an incontrollable roll.

[@Huddison]

Keep your eyes peeled for a video I'm just uploading ;)

[@Poop-vv9qt]

I can’t find the dead zone menu

[@Huddison]

Unfortunately, it doesn't seem to appear on all units of the yoke - do you have a calibration option instead?

[@ASMRHarmonyHub]

i don't have a deadzone setting in game controllers

[@Huddison]

Do you have the Logitech Yoke System?

[@ASMRHarmonyHub]

@@Huddison yes and i can't find anywhere to download the drivers

[@ASMRHarmonyHub]

@@Huddison the actual store page itself link goes straight to support page

[@Huddison]

@@ASMRHarmonyHub Don't download the drivers; I haven't and it's been working just fine. Your yoke is not showing under 'view devices and printers'?

[@ASMRHarmonyHub]

@@Huddison no it is but not showing dead zone settings just calibrations

[@karlidavidson4896]

The best, fastest, easiest and most uncomplicated way to fix the offset is... To unplug it until you hear the windows tone for disconnecting usb-device and plug it in again. It centers perfectly after the 2nd plug in and there's no need to play around with deadzones and shit. Somehow the first time, when plugged in to the pc - or even already plugged device when turning on the pc most of the time gives you a slight offset to the right. But before you start anything else just quick unplug and plug in again - 99% of the time it works instantly for me, 1% of the time I have to do it a second time. That's it. Problem solved!

[@Huddison]

Hi, Yes that does indeed also work. But with mine at least, the drift/offset soon reappears, often part way through a flight!

[@robertfeal-martinez3065]

Problem I have found is in flight if you disconnect there is no guarantee it will reconnect. I have found on occasions I have had to restart the computer.

[@karlidavidson4896]

@@robertfeal-martinez3065 ok... that's sad. I never had that problem.

[@Hoekstes]

Thanks, I have the same problem.

[@Hoekstes]

ps I saw the Rift CV1 cameras in your video. I fly with that as well. 😎

[@trincolio]

updated version?

[@DazzaJay]

Mine is really weird. The controller has a built in dead zone that's always MILES off centre, usually about 5~10 degrees to the left it hits a hardware dead zone, while windows always shows it centring about 10 degrees to the right. I unplugged it's extra power socket, and the left right axis reset to perfectly centre, HOWEVER, the pitch axis went insane. I plugged the extra power back in and everything reset to centre, even the hardware dead zone. I expect it to fall out of centre again. It's just interesting that the extra power port to power its internal USB hub has such a dramatic effect. I'm actually thinking about not using its internal USB hub for anything (currently I'm using it for the autopilot panel) as it seems to be super sensitive to power draw.

[@Huddison]

It is quite strange that the usb hub on the yoke is so sensitive; I rarely use it.

[@DazzaJay]

@@Huddison I use it because the stupid autopilot panel doesn't work for me unless I unplug it and plug it back in one's flight simulator is fully loaded.

[@DazzaJay]

So, it gets even more annoying. It's now centred correctly in game controllers, but the game has its centre waaaay off. In fact, I might record a video of this. Mind if I drop you a link when I have it done?

[@Huddison]

@@DazzaJay Join the Discord and put it in there: lots of knowledgeable people in there that can help too 😉

[@DazzaJay]

@@Huddison Got a link to the Discord?

[@mrsaucetv]

i dont have a deadzone tab

[@Huddison]

in Control Panel?

[@mrsaucetv]

@@Huddison I found it, i had to install the drivers! Love your vids

[@Huddison]

@@mrsaucetv Excellent - thank you!

[@itznotbraedon4208]

I can't see the deadzones tab. Can you help me?

[@Huddison]

Some don't seem to have it. Do you have a calibration option?

[@itznotbraedon4208]

@@Huddison Yes I do, but that for some reason messes with my throttles.