💎 How To Fix Dstv Error E48-32 | No Signal Problem

How To Fix Dstv Error E48-32 | No Signal Problem
__
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER :
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#satellite #tv #pbteck #pbteckinfo #lnb #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteckgh #pbtecknology #canalsat #canal+ #free

[@pbteckinfo]

I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...

[@pbteckinfo]

👍

[@lindandovi8773]

Thank you very much it really worked and all the channels are showing

[@pbteckinfo]

You're highly welcome ❤️

[@priscamoiadong1727]

Thank you so much. This just worked for me

[@pbteckinfo]

You're highly welcome ❤️

[@kabelomodisenyane7528]

Thank you so much, it worked

[@pbteckinfo]

You're highly welcome

[@AmedRaheem]

Thank you very I just did mine ❤

[@pbteckinfo]

You're highly welcome ❤️

[@user-et9th2dl4e]

My decoder is connected to a primary decoder and it has been showing this for like 2 weeks now. What could be the issue. Because ive chevked the cabling and everything is right. Please help me

[@pbteckinfo]

Try Increasing the signal quality from the satellite dish

[@videoswhatever6493]

Thanks brother.

[@pbteckinfo]

Much love ❤️

[@user-yn3dt9nt6r]

this video saved my life.

[@pbteckinfo]

Much love ❤️

[@plitheko]

Very helpful. Thanks for sharing.

[@pbteckinfo]

You're highly welcome ❤️

[@mopalamiphetlhu3178]

Mine was working fine,, until yesterday when i hard a problem with my hard drive,, so i reset my settings to factory default, i never got the signal after that reset,, what could be the problem?

[@pbteckinfo]

After factory reset, you have to select the right Satellite + LNB in the Installation wizard for you to get the signal to scan. Carefully watch the video and apply the right settings to get the signal back. Make sure to connect the signal cable well.

[@lucasrexsegopa7000]

❤

[@pbteckinfo]

❤

[@mojalefamofokeng785]

If it says no signal on installation wizard?

[@pbteckinfo]

Connect the cable well and adjust the satellite dish to get a stable signal

[@Korea_247]

My DStv stopped showing,I don't know what I mistakenly pressed on the remote

[@Lesiba88]

Cancel this stupid service because dstv is nonsense

[@pbteckinfo]

Reboot the decoder

[@tsotsonkiey]

How do we increase the signal

[@pbteckinfo]

Adjust the dish to improve the signal quality

[@Boom_studios292]

What to do when it says signal lock:locked

[@lebogangbridget8409]

How do u adjust the signal strength

[@AsipheMaasie]

Am stuck also😢😢

[@pbteckinfo]

By Carefully directing the satellite dish to stabilize the signal

[@aragbajehoshaphat2692]

Hello some channel are not working

[@pbteckinfo]

Improve the signal quality. Get some additional percentage.

[@allysegage9771]

How to get additional percentage

[@grant2149]

​@@pbteckinfoHow?

[@todaysdestinytrading4705]

It worked but only for 5 minutes and goes back again. But it's only no signal on some channels coz others are playing

[@pbteckinfo]

The signal from the satellite dish is not stable. You'll need to adjust it for all the channels to start working

[@todaysdestinytrading4705]

@@pbteckinfo how do I adjust it? Can I do it myself or call a technician?

[@pbteckinfo]

You can do that yourself. But if care is not taken, you might lose all the signal

[@todaysdestinytrading4705]

@@pbteckinfo thank you

[@kidusshiferaw2566]

So the srength should be 50 right to get all channels work

[@tsotsonkiey]

It's not working

[@pbteckinfo]

Adjust the satellite dish for a stable signal

[@user-vj2gi9ho3j]

Stacked on step 4

[@pbteckinfo]

Get a stable signal from the satellite dish

[@thatophasha3407]

​@@pbteckinfo how do you do that?

[@Yvonne_Oyinda]

Some channels are showing while some aren’t

[@pbteckinfo]

The signal from the satellite dish is not good enough. You should let someone adjust the satellite dish a bit, to get a stable signal.

[@kediboneshao3343]

Hy how did u fix