How to fix fuel leak in 1 hr for less than $100 - Land Rover Range Rover Evoque 2011- 2026

[@manny1shido]

30 minutes 😂😂😂 it took me 6 hours to remplace the fuel pump 😢😅😂 but thank you brother !.. your vidéo help me a lot!! ❤

[@GusM-DIY]

Yeah only If you are very skilled I’m sure it can be done faster, I’m glad you saved a couple thousands💸💸🤙

[@DayleFi]

Hey man! Just want to say a big thank you!! I used your video to lower my tank. My axle didn't come out but i pushed up driver side of the tank and pushed down passenger side to get access to filter. Thanks man!!

[@GusM-DIY]

Thank you for watching and comment, I’m very glad you were able to diy and save some 💰💰🤙🏾!!

[@HoraceCrow]

Thank you for video. My son-in-law was able to fix my 2012 Evoque in about 4 or 5 hours. Saved a lot of money. My engine light went out on it's on.

[@GusM-DIY]

Thank you for watching and your support! 🙏

[@Aliasbdzbot]

Your Video is pretty good but im gonna make a few additions and working on the 2017 evoque....

[@flyingscot3666]

gr8 video dude - I have LR2 of same vintage but pretty sure your video is completely applicable - much appreciated.

[@danielgutierrez5362]

I am having the same problem with my 2014 Evoque. Thanks

[@GusM-DIY]

I hope you can fix it! It looks harder than what it really is 👌

[@Mst_thetrollone]

This video it’s like watching someone bake a cake and after introducing itself the cake its ready to eat. Skip a lot of essentials.

[@GusM-DIY]

You are welcome to comment if I missed a step on the video or ask if you out have any questions, thanks for watching 🤙

[@duckyinc2448]

Fantastic video! Link to the parts aren’t showing up, any chance you can post those again?

[@GusM-DIY]

Sorry it took a while but links are updated in description!

[@adrianjimenez3614]

I have a 2014 Evoque and I had the same issue, I followed your video and it took more than 30 minutes,took more like a few hours

[@GusM-DIY]

It should take around one hour with all tools, if you dont remove the driveshaft you only have to drop the gas tank and from there change the filter

[@adrianjimenez3614]

@@GusM-DIY if you're lucky it's an hour, if the driveshaft is seized it will take longer, if the fuel tank is full you need a transmission jack to lower and raise it and then you would have to disconnect the exhaust

[@GusM-DIY]

@@adrianjimenez3614 glad you were able to get it fixed and saved yourself some money man 🤘🏽

[@killersleeve382]

For anyone considering doing this, there is no shot this comes off without removing the entire prop shaft. If you have a 2012 it does not just slide off. I’ve been going at mine for 2 days and the shaft is still stuck on. The tank doesn’t drop enough to remove the styrofoam without the shaft being off so I’m pretty much stuck here

[@GusM-DIY]

⬇My top DIY Tools:⬇ 🛠 Must-Have Tools for Every DIYer! 🛠 🔧 HORUSDY 50-Piece Impact Socket Set - 17% OFF: amzn.to/4dtLLgt 🛠 ANCEL FX2000 OBD2 Scanner - 20% OFF: amzn.to/46Z5a6D 🚗 FOXWELL NT630 Plus ABS Scan Tool - 20% OFF: amzn.to/3AF1kU4 🔩 DEWALT 20V MAX XR Cordless Ratchet Set - 3/8" & 1/2" - 15% OFF: amzn.to/3T5gAjs 💥 DIY Like a Pro! These tools are essential for any project. Plus, sign up with Amazon Prime for even bigger savings! 👍 Like and Subscribe to help the channel grow - your support drives me to create more awesome content for DIY enthusiasts! Thanks for watching!

[@valerioventura]

Great job, is this the same pump for a 2012 Range Rover Evoque?

[@GusM-DIY]

Thank you!! Hope it helped. Not sure but if it’s the same trim could be, you should be able to choose the year when you order the part online 🤙🏽

[@trumpgirl1394]

that is the same as mine.... did you locate the part?

[@trumpgirl1394]

What is this part called ? or part #

[@KrenzNCo]

FYI, just finished mine. The new gasket number is LR117476. Also, getting a grinding noise on acceleration after this work, not sure what it is from yet

[@GusM-DIY]

Thank you for the info!! Hmm grinding noise , make sure the shaft is not touching any metal when it spins, let me know if you find anything please

[@JosephOsorio-x8v]

Will this work on a 2014 lr2 ? Same engine 2.0

[@GusM-DIY]

Should be the same engine, but slightly different turbo charger just make sure to get the same looking one

[@tranghoangvan5565]

After I replaced the fuel filter with a new one, the fuel indicator light is no longer correct, where should I adjust it?

[@GusM-DIY]

It should correct it self right away. Could be defective filter. Also try unplugging and plugging in the battery. Thanks for looking!

[@killersleeve382]

Also, the link for the pump cover says it’s for the v8 only. Are you sure that’s the correct one for the 2.0l evoque?

[@KrenzNCo]

Yes it is correct, just did mjne.

[@killersleeve382]

@@KrenzNCo Yeah i did it and then the engine siezed 1 month later.

[@KrenzNCo]

@@killersleeve382 noooo

[@killersleeve382]

@@KrenzNCo thats the 2nd motor that died in the 2012. we sold it. cant be playing that game anymore

[@GusM-DIY]

Man that’s sucks I’m sorry, do you know why it seized? Did it have an oil leak or burn oil? Turbo chargers go out before 100k on many of these, I had to change mine out. I’ll be uploading the video sometime

[@killersleeve382]

How did you know it was the fuel filter and not a hole in the tank? I have a leak in the exact same spot and there was a small amount of liquid on top of the filter but I don’t see any when running

[@GusM-DIY]

You can tell that the leak comes from the top, plus after I changed it never leaked again

[@killersleeve382]

@@GusM-DIY that link for the fuel pump cover says it’s only for the v8 range rovers. Are you positive that’s the one your ordered for the evoque? Just want to be certain before I order it

[@GusM-DIY]

@@killersleeve382 that’s the one I ordered and it’s exactly the same one as I took out from the car

[@killersleeve382]

@@GusM-DIY thank you. For the info and the video, will be going at this next week. Then I get to chase down this stupid tpms light

[@crazyfaint]

on the filter where you connect the fuel pipe, there should be a Fuel tank vapor connection or am I missing something?

[@MyFloatingPlant]

It’s one connector inside the tank and another one outside!

[@KennethGodfrey-b3f]

I have the same problem, but it only leaks while the car is running

[@GusM-DIY]

Might be a loose hose!

[@drissnakhil1573]

What was the problème please ?

[@GusM-DIY]

Fuel leak through fuel pump

[@massimobalsamo7759]

I have the same issue, I went to a mechanic he quoted me $3260!!!!! 😱 To replace that part!!!

[@GusM-DIY]

Oh man, that’s insane, try do it yourself , get your self a good set of tools , jacks and give a it try, looks harder than it really is. It took me a couple of days just because had to figure out how to drop the gas tank. Also, you should be able to do it without dropping the shaft 🤙🏽

[@GirlsNDragons]

Why is the title “30 minutes” but in your description you admit it took you all day, and then proceed to say if you don’t drop main shaft you “might” be able to do it in an hour. None of that makes any sense. You’re creating clickbait and unrealistic expectations for people. FYI. You guys are getting ripped. The labor rate is 3.5 hours. I have no idea why you guys are quoted thousands for this.

[@GusM-DIY]

Depends on your skill level, your welcome for showing you how to save you thousands of dollars from the dealership ( yes that’s how much they will changer you Land Rover dealer ship) you may take it there 👍🏽

[@GirlsNDragons]

@@GusM-DIYI own a mechanic shop, that’s why I know you guys are getting ripped at your own dealerships/shops. But 30 minutes is unrealistic period, doesn’t matter the skill level. I just think you should edit the title and be more honest. This video could get alot of DIYers in a sticky situation