How to fix Hyperflash WITHOUT RESISTORS

in this video I am using the EP29 electronic flasher nut they make an assortment of different relays for different trucks.

[@OKJefe]

Thanks. Great information and easy fix.

[@Dirtydetours]

Np man

[@214deleon4]

In place of where you said to put it theres the flasher relay do you have a flasher relay? And if so where is it located? Or my other thought was if that led relay works as flashers too?

[@Dirtydetours]

You remove your old flasher relay and put the new relay in

[@HappyHands.]

Keep in mind, this only works if ALL your turn signals and flashers are LED

[@Dirtydetours]

Forgot to include this in the video

[@Jaemg5]

Will this work for any chevy car? I bought a vland sequential tai light for my camaro 2017 and it does hyper flash when i turn the signals.

[@raulm2868]

What do you mean by flashers??? I installed LEDs in my license plate light and removed my day time running light bulbs completely. Now I’m getting hyper flash.

[@jfoxofficial7]

@@Jaemg5me too man.. did you figure out how to fix this issue? I need help

[@Jaemg5]

@@jfoxofficial7 nope i could never fixed it. Sorry man.

[@thomasknuuttila5482]

Does a 2014 Silverado have a relay for turn and hazard light? And if it does, where is it located? I have all new LEDs bulbs put in

[@vincentgiordano403]

i drive an 06 honda civic ex coupe. do you know if this relay would work on that, or do you know where i can find one that would fit with my car ?

[@bradleycruz2286]

Local Auto parts store

[@homerdadon6363]

did you find anything ? I want one for my 12 TL

[@shawnmcclure7282]

Does it work for a 87 gmc?

[@That.97.z71]

Im having this problem where after i installed my blinker bulbs, everytime i use my blinker it flips my hazards on. Ive already replaced my relay and its still not working. Any ideas?

[@realmadridFS7]

does this work on a Infiniti G35 Coupe?

[@Cgarrison]

Got a question.I’ve swapped all leds.change the relay out but with low beam lights on my high beam indicator stays on as well as my blinker arrows are illuminated.got an idea?

[@Dirtydetours]

What vehicle is it

[@Cgarrison]

@@Dirtydetours 96 c1500 but I think I just figured it out.i believe I had the factory truck plugs backwards.

[@derricknelsonjr.9941]

@@Cgarrison that will do it. Have led turn signals installed and found out I miswired them.

[@shawnmcclure7282]

My 87 gmc does the same thing and blinkers don't work with low or high on only off or running lights

[@frightenedskillet1051]

I got a 2005 Silverado 1500 with all led lights and I need help finding what I can buy

[@barillasayala]

I cant find anything for a 04 dodge dakota SLT, any help will be well apreciated!!!!

[@Dirtydetours]

Dodge may not have an alternative

[@barillasayala]

@@Dirtydetours I did put led resistors...it worked

[@MMR-ju1nz]

Can i use that on a 2018 chevy camaro? Do you have a link where can i buy it?

[@shawnmcclure7282]

I believe all new vehicles like my 11 silverado is controlled by bcm. So now flasher relay to change. Have to tune it or buy lasfit with built in hyperflash fix

[@philfish6619]

Can you get them for a hummer H2 08

[@alfredo042295]

I can find the Relay in my 2013 Ford Edge se can somebody help me I look under the Dashboard and don’t see it

[@angelestrada9874]

Does it works on a 1999 chevy silverado 1500 the heavy duty flasher relay

[@Dirtydetours]

I believe so but I’m not completely sure

[@Dirtymax_Danimal]

You’re is a square shaped 99-02 . 03-07 is rectangular shaped.

[@katiewilkins8851]

Where can I buy this abs van it works on a 2020 Toyota Tacoma

[@Dirtydetours]

You should have no hyper flash on a 2020 model

[@eddiesantiago6288]

I need an electronic flasher for 2019 Ford ranger. I can’t seem to find one can you help me locate one?

[@Dirtydetours]

You probably will not need one on a new truck

[@jamesm568]

I never understood why you needed a resistor in the first place if you had a normal flasher to swap out for an LED flasher.

[@Dirtydetours]

Because too many watts are being pushed through the stock relay

[@jamesm568]

@@Dirtydetours If you're using a LED, that reduces the watts to the stock flasher, but adding resistors just requires more power as all you have to use is an LED flasher to eliminate resistors. I have never in my life used a resistor to install an LED.

[@Dirtymax_Danimal]

It’s because the computer thinks the bulb is blown therefore it hyper flashes to notify you a bulb is out. The led isn’t being registered my the computer.

[@FelNoobs]

@@Dirtymax_Danimal you right , no read is there bulb , my friend installed extra wires with sockets and keep halogen bulb and hidden them and installed LEDs and eveything work good without resistors , computer still read there is bulbs

[@shawnmcclure7282]

Different resistance

[@petera1808]

Does this fit on 95 Yukon ?

[@Dirtydetours]

Yes

[@Giorgio_.1]

It worked for my front turn signals but not for the tail lights. Any suggestions for the tail lights? 《94 Chevy Silverado 1500》

[@Dirtydetours]

Are you running stock taillights

[@Giorgio_.1]

@@Dirtydetours I'm running leds bulbs on the tail lights.

[@Dirtydetours]

They might need a resistor in them I only have experience with taillights that are full led with a relay

[@Giorgio_.1]

@@Dirtydetours then I will probably be using resistors for my tail lights thanks.

[@jamesm568]

Or you have more than one flasher.

[@RenoMadeCGP]

could i get a link to the relay and will it work on a 1990 sierra?

[@larrybanks867]

Look on eBay that’s where I got mine

[@Dirtydetours]

I also got mine on eBay

[@sergiod21]

Does this work on a 92 Silverado?

[@sergiod21]

?

[@sobhi05]

Trying to locate the relay for 2011 avalanche 1500 but no where to be found. Does anyone knows where it is?

[@Dirtymax_Danimal]

I’ve been looking too bro.

[@animosity1622]

does this work on a 96 sierra?

[@Dirtydetours]

Yes

[@ohhmega7330]

Is this a thing for a 2001 tahoe

[@Dirtydetours]

Yes

[@daylangio]

would this work on a 2008 silverado

[@Dirtydetours]

They don’t make a relay for your truck so you will have to go the route of the load resistors

[@daylangio]

@@Dirtydetours yep i used resistor, i’ve got no hyperflash though haha

[@Dirtydetours]

Daylan Giovati glad I could help

[@Chevro91]

Ok so tell us what the part # name is where can we find it locally

[@chrissmith7765]

Lmao

[@alolipa]

Stop moving around

[@IIIPUMPERIII]

Tysm