*FIXED* Hyperflash in a 03-07(classic) Silverado!!!!

[@irishuwould5185]

Can’t believe so many people didn’t know about this. Same thing on the obs trucks, which the flasher relay is even easier to get to

[@ZPTVChannel]

Right!

[@jacksonrandolph5]

This fixed my problem! I was gonna wire in resistors but this was worth the time and money. Thank you for this!

[@dumass666]

Ive heard the resistors domt work as well also big pain in ass

[@brianz4948]

Worked great, so much easier than installing resistors

[@Dd45668]

Got mine installed yesterday. The novita module worked perfectly. Thank you 🎉

[@user-manny43]

Resistors work just fine but doing this is much cleaner!

[@kevinjost8588]

Worked great, fixed my hyper flash after i did the drl mod and installed switchbacks. My blinkers are a bit slower than stock, maybe its the difference in relays? Both switchback turn signals function properly. When I turn on flashers, the switchback bulbs go white for a split second then flash amber and repeat. Not terrible as it only does this with the emergency flashers on.

[@crlaw75]

I wish vehicles still had the flasher units, instead it controlled by the BCM. I didn't have to pop the knee bolster off, I just reached quite far back and changed it by feel.

[@ZPTVChannel]

Yea I’m pretty sure the 07 classic is the last year for the flasher relays the rest are bcm controlled…

[@johnhenry363]

Thanks for the information. Great JOB!

[@ZPTVChannel]

Thanks!! Happy to help!

[@scottknodell8946]

Awesome information!

[@dominicr2733]

brotha. finishin up a welding bed over here i got the bed incomplete but there was a nice 56” cutout for a led turn signal bar. the 4 running led lights i put on each side work fine the led bar acts very erratic

[@dominicr2733]

with lights on it mostly works fine sometimes if u push the blinker level a little too hard or soft the rear blinker wont work. sometimes u flip the blinker and it wont work til u pump the breaks a little. u think this might be my issue? my blinker in the truck also flashes a little fast

[@ZPTVChannel]

Very possible! The stock flasher relays freak out when leds are installed and they also do some wild things when the flashers are going bad as well. My left blinker would do anything about 90% of the time and once I added leds they hyper flashed like crazy but after I installed the new Novita relay everything works perfectly!

[@dominicr2733]

@@ZPTVChannel thank you brotha ill pick one up see what it does

[@dominicr2733]

@@ZPTVChannel that relay fixed my issues. thank you kindly

[@ZPTVChannel]

@dominicr2733 happy to help!

[@KanakaMaoli1]

Thanks man you are my hero

[@desigualteam5668]

Mines is 99/02 the really is different, Tks for the location info

[@Blackcateye04]

I put led turn signals with built in resistors on my truck work fine but makes my cluster act weird like a shortage showing on the board should I run this product

[@Blackcateye04]

Like when I turn signal the right one flashes a little bit on my cluster and when I signal left right one flashes a little bit

[@ZPTVChannel]

Yes, you’ll need this relay if you want to run led turn signals!

[@Blackcateye04]

@@ZPTVChannel hopefully it solves my issues with my shortage running through my cluster

[@ZPTVChannel]

Worth a shot! The stock relay does wild things with leds lol

[@todizzle666]

I've just replaced just all the bulbs in the rear and third rear tail light with led lights and got the hyperflashing going on and it's super annoying but I also put in hid(8000k)front lights and I like your front switch backs I think you called them but I also really like the led running lights that they got out now along with the led strips for the running lights it would look nice but putting a ton of money in a truck that's this old.... idk about that idea I mean I got a aydio system but all that like the speakers and amplifiers all can be pulled back out pretty quickly and I really want to replace the 160 amp alt to a 400 amp with possible lithium battery cells or headway cells its a type of lithium that can be charged at 14.8 volts and possible delete the front battery or getting a xs lithium and just save my alternator and battery for when I want to get another vehicle it all can be pulled out my truck is 170k but is in the rust belt but thanks for the video it's very helpful n wondering if it would help me also?

[@ZPTVChannel]

I feel you about putting the money into an old truck lol mines at 310,xxx miles and I’ve put over a couple grand into it already and planning on doing a lot more lol it really just depends on you I’m the type that doesn’t like to throw something away and if I can make something old new again I like to do that stuff. But as far as the hyper flashing the relay I got should fix that problem. Also living in the rust belt with these trucks involves a lot of maintenance thankfully I’m in Tennessee so not too much exposure to salt and stuff like that. But 170k miles your trucks still young as long as the rust isn’t too bad I’d say it’s worth building!

[@ericponce9354]

After putting led turn signals my rear brake lights do not light up unless I’m using a turn signal. Do you have any suggestions??

[@ZPTVChannel]

Most likely a blown fuse. But it could be a bad brake light switch or a faulty flasher relay. I’d start at the fuse though.

[@ZPTVChannel]

Also make sure the leds aren’t in backwards most leds are polarity sensitive try pulling them out, flipping them 180 degrees and putting them back in.

[@dillonperkins4046]

What brand led switch backs are those? Can u link those as well. Thanks for the video it worked for me as well!

[@ZPTVChannel]

www.amazon.com/Alla-Lighting-Switchback-Parking-Blinker/dp/B08QLCFP41/ref=mp_s_a_1_5?crid=PJME5OJ53AGC&keywords=alla+lighting+switchback+turn+signal&qid=1640214965&sprefix=allah+lighting+sw%2Caps%2C83&sr=8-5

[@bikelifejb9875]

I have a 2005 Chevy Silverado i have LED light on mines an I tried to change the Gm original flasher relay the new one I put in wasn’t Novita it didn’t have a name on it.. it made my turn signal an 4way hazards go out an now they want work do I have to get the novita one please help

[@ZPTVChannel]

Yes, you have to get the novita relay.

[@bikelifejb9875]

@@ZPTVChannel I’ve got it today an it works amazing. Also just to inform anyone that’s having or going thru the same issue I was check your “FUSE” for the 4way hazard an signal light they run together its number “25” mines was burnt out i change it an my signal lights an 4way Hazard start working again.

[@Demolitiondude]

I got the weird problem of my right turn signal on the dash is hyper fast but left turn signal isn't.

[@ZPTVChannel]

Did you swap the flasher relay?

[@Demolitiondude]

Not yet. That's on my to do list.

[@ZPTVChannel]

Mine was doing a whole bunch of weird stuff as far as the blinkers go. I was thinking I was going an a hunt for some kind of electrical problem but as soon as I changed out that relay everything was back to normal!

[@Demolitiondude]

That was an adventure and a half. Monday, got the wrong size relay. Today, returned it and got the appropriate one. Everything is working fine.

[@Hoosier81]

What if your dash turn signal arrows stay on, but you have no turn signals at all. If I turn the lights completely off I can turn on the hazards but they flash really fast.

[@ZPTVChannel]

They’ll do that if the relay is going bad as well!

[@Hoosier81]

@@ZPTVChannel copy that, definitely switching the relay tomorrow. Thanks Subbing

[@ZPTVChannel]

I appreciate it! Happy to help!

[@XavierJ514]

Did you have all 4 signals as led? Really wanna run switch backs in the front and LEDs in the rear if this regulates them I will definitely spend the 50

[@ZPTVChannel]

I don’t have them in the rear at the moment but this relay should be able to handle it no problem!

[@robbiekyle2615]

Does this for the dim,blinking led map and some light ?

[@ZPTVChannel]

No this is only for the outside blinker lights.

[@gabeangelo479]

Will this fix led running lights that are flashing? Not the blinker just the regular running lights that stay on because this would be easier than resistors

[@ZPTVChannel]

I think this relay only deals with the flashers.. I’m pretty sure the running lights are on a different circuit

[@perez6534]

okay so i have led taillights with all led lighting in the front and tow mirrors(not wired to fuse yet), but at light or any time my taillights and drls will flicker when im braking? And then my tow mirror signals start to hyper flash but goes away after im at a complete stop. Will this solve my problem

[@ZPTVChannel]

It should! The factory relays hate leds lol

[@mondo9.2.5]

did it ??

[@kevinoconnell8242]

I see in the video that both bulbs the perimeter light and the directional blink together. I will need to check mine as I did not realize that. the inside bulbs on my 04 2500HD are white and the directionals are amber. I am confused now...

[@ZPTVChannel]

The inside lights from factory are drl lights and aren’t supposed to blink but I did the drl to blinker mod on mine.

[@kevinoconnell8242]

@@ZPTVChannel thanks for clarifying

[@ZPTVChannel]

No problem! Here’s the link to that video if that’s something your interested in doing! kzbin.info/www/bejne/noTCiqibmtGgZs0

[@KSDRIVEWAYGUYS]

Doing this , this week!

[@ZPTVChannel]

Super easy compared to other cars! Just one relay fixes it all rather than a bunch of resistors wired in everywhere lol

[@dlardo5751]

I have a avalanche 2013 with same problem hyperflash, what is relay i need to buy

[@ZPTVChannel]

www.amazon.com/Novita-LM487-Flasher/dp/B001KS6GIG

[@raywyatt1483]

It fixed mine but now when the headlights are turned on they don't work at all

[@ZPTVChannel]

That’s most likely going to be another issue… almost like a wire is crossed somewhere.

[@LeonelFelix-y2s]

We’re can I buy this relay my switchbacks don’t work at all don’t flash or turn white

[@ZPTVChannel]

I bought mine off Amazon. Just look up Novita LM487

[@jaredjason8]

I installed some lasfit turn signals that switch from white to amber when flashing one of them works fine but the other one flashes white than amber than back to white than amber but it’s not constant amber when flashing, do you know what would be the cause?

[@ZPTVChannel]

Try swapping them and see if the other bulb starts doing it. If the same bulb is still doing it in the other side it’s probably an issue with the bulb.

[@JuanRodriguez-rt7ws]

So does that mean I would have to remove my inline resistors???

[@JuanRodriguez-rt7ws]

I've also had unlined resistors since I replaced my bulbs to l.e.d, and I have an 03 gmc 25hd..

[@ZPTVChannel]

I’m not sure.. I’ve heard you do but I’ve never messed with any of that..

[@cassandraclum7607]

I don’t have LED lights but I do have the tow package. For my 02, what do I need?

[@ZPTVChannel]

I’m not sure if the 99-02 are the same as the 03-07(classic) when it comes to that

[@gassadually6879]

Thank you for this video I really didn't want to install those ghetto ass resistors 🙏

[@ZPTVChannel]

Me either lol I looked into it specifically staying away from resistors 😂

[@gassadually6879]

@@ZPTVChannel dude same I like to keep my wiring factory looking and resistors look like a hack job

[@benthere404]

@@ZPTVChannel This is not necessary for 99-2002 Silverados or Sierras, as long as you have leds all the way around for equal load resistance. Didn't need it on my 2000 rado or 2002 Sierra, but 2003 Sierra had me stumped.

[@JakeLowrey]

@@benthere404 I’ve got on ‘03 Duramax and this didn’t fix my issues. I’m getting hyper flash and when I turn my brights on the dims shut off? Any ideas?

[@ZPTVChannel]

They turn off from factory unless you do the all lights on mod

[@JorgeCoss-l1s]

Does it work for 99-02 and for any light

[@ZPTVChannel]

I don’t think so… I think 99-02 is different..

[@realreviews5693]

I did full LED bulbs on my 07 classic Sierra. The back and front bulbs are all in one's with built in resistors. When my daytime running lights are on they blink fine. But when my lights are on at night they hyper flash. I thought it was because of the 194 led side marker bulbs I also replaced. When I put a regular bulb in on one side the blinker just lit up and didn't blink. Any ideas on this?

[@ZPTVChannel]

Could be a bad flasher relay.. it does all sorts of weird stuff when it’s going bad

[@realreviews5693]

​@@ZPTVChannelI'm going to try it. I will update the xomment if it works in case someone out there has a similar problem.

[@throwdownlax]

@@realreviews5693mine is doing the same thing and was wondering if you ever got it figured out?

[@danamcintyre3565]

I have an 03 S10 that does the same thing but with headlights on they don't flash at all ?

[@ZPTVChannel]

I’m not to sure about the s10s but if they do have the same relay that’s what I would check first!

[@danamcintyre3565]

@@ZPTVChannel I changed the relay never had a problem with the regular bulbs so I guess I'm going to either put my stock bulbs in it or spend $40 for the LED at the parts store !

[@dseelman1984]

TIP: If you unclip the fuse unit from the left you get more room to work with.

[@ZPTVChannel]

I was thinking there had to be a easier way to get it in and out! There’s barely any room lol

[@digi3218]

Thank you for this

[@nbsaddiction1522]

Will this fix the issue for my 03 Tahoe turn signal trying to put leds

[@ZPTVChannel]

It should! I believe the fuse boxes are the same!

[@nbsaddiction1522]

It's a z55 autoride 4x4 it has towing package would I need the relay specifically for my model

[@ZPTVChannel]

I’m not sure if they’re model specific but My truck is a 4x4 with the tow package so the one linked in the description should work for yours too!

[@nbsaddiction1522]

@@ZPTVChannel gave you a follow on the Gram good how to video

[@ZPTVChannel]

Thank you! I really appreciate it!!

[@rambop3132]

Did you have a cruise control issue? Did it resolve it as well?

[@ZPTVChannel]

I’ve never had a cruise control issues but at the same time the only rear light that’s led is the 3rd brake light.

[@kevinjost8588]

Are your blinkers the same speed as stock with the relay? I did the drl mod, switchbacks, and relay install. My blinkers are definitely slower than stock. Could it be the difference in brand of relay?

[@ZPTVChannel]

Could be. Mines about the same maybe a little bit slower.

[@extendomigs]

Does it work if you also have led taillight turn signal bulbs?

[@ZPTVChannel]

Yes I ran led taillights for a while with no issues!

[@davidcabrera8626]

Any issues with the battery draining?

[@ZPTVChannel]

Nope!

[@yudithmolina7605]

Im trying to take it out to replace but it’s too hard to pull out

[@ZPTVChannel]

It can be very tough. Mine was at first I had to get some pliers to pull it out.

[@irishuwould5185]

Yea my pull out game is weak too

[@a.m1285]

does this still work if you hook up trailer and add extra load from the trailer lights?

[@ZPTVChannel]

I haven’t personally tested that myself yet but according to the manufacturer of the relay yes it should work!

[@ZPTVChannel]

I did recently acquire a trailer so I should be able to test it soon!

[@Blackcateye04]

Also does this only work when you do the drl delete

[@ZPTVChannel]

No, it works without doing the drl delete as well!

[@alejuju767]

I’m trying but the stock one won’t come out

[@ZPTVChannel]

Mine was in there tight. It took a lot of persuasion to get it out.

[@nickmathis2031]

Thank you

[@scottytoohotty7979]

Would have liked to see an after with this video

[@ZPTVChannel]

It’s still working just fine!

[@scottytoohotty7979]

@@ZPTVChannel would still prefer to have had a before and after in the video

[@MichaelDart-h6w]

Do you have resistors on the blinkers?

[@ZPTVChannel]

No, just the new flasher relay!

[@MichaelDart-h6w]

@@ZPTVChannel ok cool thanks for the info! Your channel is a big help keeping doing what your doing my guy👍

[@ZPTVChannel]

No problem! And I really appreciate it!!

[@JamisonCover]

Will this work in a 2009?

[@ZPTVChannel]

No. I believe the 2009s are controlled by the bcm. If you’re having issues with hyper flash you’ll have to get leds with built in resistors or add them in-line. The leds with built in resistors are easier to install and better in my opinion.

[@camerunllo]

Will this fix the issue for my Chevy 2008?

[@ZPTVChannel]

I honestly don’t know… the 03-07(classic) trucks are a different body style than the 2007(non classic) and up so I think the wiring may be different…

[@crlaw75]

The flash rate is controlled by the BCM. There isn't a flasher unit. You would have to use resistors.

[@michaelcampos75]

Great video thanks for the info, btw like the dash blue lightning, can you do a video or how you installed that

[@ZPTVChannel]

Thanks for watching! And here’s a video of me installing them on another cluster I had for the truck! kzbin.info/www/bejne/iIubmHWrbZJ5mas

[@ZPTVChannel]

I ended up swapping out that cluster for the one I have now which is my factory cluster where I added the trans temp gauge and a new gauge face!

[@danober3283]

Comes with a module on the wire to the bulb plug in

[@Wanksta713]

Bought for $8 on ebay new, autozone wanted $80 what a joke they are

[@ZPTVChannel]

Always cheaper online! The mark- up at part stores is nuts lol

[@eidolonofficial]

anyone know if this also corrects the lights not flashing with the headlights on? mine hyper flash with the headlights off and when I turn them on they flash once and stay on.

[@thomasjefferson3770]

Mine does the same on entire driver side turn signals

[@Legendary_Frank]

you got led turn signals in the back also cause I get hyper flash if I have them infront and if I also but them in the back the lights just stay on don’t flash just stay lighten

[@ZPTVChannel]

I just have regular halogen in the rear I plan on going led when they burn out. I’ll have to do an update on it when I do!

[@Legendary_Frank]

@@ZPTVChannel I have led fronts and when I put LEDs in back it doesn’t even hyper flash it just stays on I spent like 40 mins trying multiple things and I couldn’t figure out anything

[@Legendary_Frank]

@@ZPTVChannel like its back feeding but it starts hyper flashing again when theirs atleast 1 normal bulb and one led like its either both of normal 1 and 1 or none

[@ZPTVChannel]

@Legendary_Frank that’s weird… I’ve never heard of that issue before.

[@ZPTVChannel]

@Legendary_Frank do you have the novita flasher relay?

[@Socalmtb88]

Didn't fix mine.All the bulbs are good too. So Idk what the problem are.

[@ZPTVChannel]

Are all the fuses good?

[@Socalmtb88]

@@ZPTVChannel that's the next thing to check.

[@El21chicago]

Will this work for 03 tahoe anybody know ?

[@crlaw75]

Yep, those flasher units are EXPENSIVE.

[@ZPTVChannel]

About $50

[@homerdadon6363]

You shouldn't be looking at this video if you can't afford 50 bucks bro

[@dianagarcia4752]

I got mine bro 13$ on Amazon still gotta install it

[@dianagarcia4752]

On Amazon.

[@crlaw75]

For me, it was over 10 years ago, so I imagine the prices may have come down since then. But, it's also who you buy from.

[@gabrielbz.]

i did this and it’s still hyper flashing any idea why?

[@ZPTVChannel]

Do you have leds in the tail lights too? I’ve heard of some people still hyper flashing if they have front and rear led blinkers. It’s really tough to say I’ve had my eyes on a few forums on Facebook and some people say they have all leds all the way around and no hyperflash with the relay, and then some saying it’s still hyperflashing with just switchbacks.

[@todizzle666]

@@ZPTVChannel this is what I was asking I put in the rear taillights/break/running lights and my blinkers I want it to stop but I guess I could just buy it and if it works great if it don't I send back the relay I've read Multiple places to do one or the other do the resistors or doing a relay maybe the one you replaced is for the front and they might have another for the rear tail lights or blinkers?.?. If you happen to know lmk thanks for the video though

[@ZPTVChannel]

Im almost positive that’s the only relay for the flashers and blinkers..

[@kevinoconnell8242]

@@ZPTVChannel what is a switchback?

[@ZPTVChannel]

@@kevinoconnell8242 it’s white when it’s on with your headlights but it turns orange when you turn on your blinker.

[@mm-xl3cn]

Mine got burned

[@ZPTVChannel]

Really?? What happened?