How to Fix Incorrect Floor Framing | Straightening Kitchen Floor... Kinda

[@TheFixerHomeRepair]

Subscribe to my channel: bit.ly/SubscribeToTheFixer Thanks for watching! 😀

[@SteelPenny67]

I've been tapping on these notifications the second I see them, im so invested in this project 🤔

[@TheFixerHomeRepair]

Love to hear that! Thanks, Luis!

[@rushmatic]

This home is literally the Ship of Theseus… I commend you sir 💪

[@candicespencer2021]

This framing is way over my head but so much fun to watch!

[@AndyTheXTech]

Dude that’s a cool shot to see the floor raise up to the string. Good job 👍

[@TheFixerHomeRepair]

Thanks man. It was good to see afterwards. Reassured me I was actually doing something in the basement haha. Thanks for checking it out!

[@ninabrownsilberman7919]

Camera work is excellent. I can see exactly what you are describing, all the way through.

[@John-cb6wn]

You are the only one on the internet that goes into so much detail don’t always agree with everything you do but that’s what makes the world go around, well done 👍

[@delm0nte]

The red recording light on the 1st floor cam was a nice editing touch ⭐️

[@carlahubbard7561]

So the 1st floor cam is awesome and explains a lot!

[@TheFixerHomeRepair]

Awesome to hear! Glad I put that in there!

[@snoozieq4584]

My dad had to do something similar with the house we lived in that was built in 1909. All of the stairs lined up with one another, basement to first, first to second and second to attic. On the first floor in the dining room there used to be huge pedal pump organ that was against the wall of the second story stairs that dropped everything. He used metal floor jacks like what you used at 39:57, not bottle jacks, and started from the basement and raised the center of the whole house, since the stairs were in the center of the house. The eight floor jacks he used, four on each side of the basement stairs, stayed there until his death in 1983, still holding up the whole house. It was truly amazing that he brought the whole house back into level by the addition of the floor jacks in the basement alone. Watching this video makes me wonder why you didn't start with the basement also. It may have saved a lot of headaches with floor leveling later on. At least you only have a one story house to contend with instead of three or four. Great video! Edit: "I need some help. I need some friends. Somebody help me!" My dad had his brothers help him. One was a master plumber, one was an electrical engineer and one was a master electrician and master carpenter. My dad was the quintessential Jack of All Trades and master of none. He was an upholsterer, meaning he reupholstered old furniture and made it look brand new. All of my uncles' houses had couches, loveseats, recliners, hide-a-beds, chairs, chaise lounges, etc., reupholstered by my dad. I suppose as payment for the help they gave to him.

[@surferdude-ll2qu]

Them little tips like screwing in 2x4 into the floor joist comes from experience, it's always them little things, that floor is tricky you put some work in. 👍

[@rosemarshall1219]

english is not my native language and i have to admit that your explanations are always clear and précise as your work!

[@TheFixerHomeRepair]

That is great to hear! Thanks for watching, Rose!

[@LeoInAMillion]

Would you ever consider building a house from scratch? It feels like you've almost rebuilt this one! Great video as usual 👌

[@TheFixerHomeRepair]

I have thought about it. It is not out of the question!

[@cantgetright742]

@@TheFixerHomeRepair you should. I watched a guy for about 5 years build a homestead on the weekends. He recorded it so he could later share it with his kids and their kids

[@Akinitas]

@@TheFixerHomeRepair that would be so kool to see! But good work with the remodel I love it!

[@seascapedreaming5518]

I thought the same as well, however, I was hoping to see his personal Shed get built first.😁

[@chk3700]

Prolly actually easier to a point...and control would be nice (speaking as a man/he) sry not sry

[@johnrazor8720]

Nothing to add other than you are doing a great job.

[@TheFixerHomeRepair]

Thanks, John!!

[@teresab6383]

I just realized your job is not easy. But I have faith in you

[@toshkonya1419]

Your fixes for the crooked floor gave me some good ideas for fixing a lumpy floor in one of my rooms, by using sister beams to straighten the droop. Thanks! 😀

[@tpctrash]

You do some great videos. Great work. I do have a tip that my dad always did when stringing lines to check for straightness or flatness like you are doing. He would do what you did with the string but would slide a little block of wood, say 1/4 or 1/2 or 3/4 on each end. Then when checking the floor have another block the same thickness and slide it under the string when it’s low or when it touches the string perfect. Doing it this way does not allow a high spot pushing the by string up. Don’t have to do it it’s just what he taught me. Glad I found your channel. Keep them coming.

[@JohnH0130]

Next time you sister joists, consider using a couple of C-clamps to eliminate the gap caused by cupping of the lumber. The clamps really need to go on before any of the fasteners; otherwise the heavy wood screws can actually make it more difficult to close up the gap. The gap reduces the effectiveness of the construction adhesive considerably. Nice to see how someone else deals with the issues inherent in upgrading and repairing an older house.

[@dustyrose284]

Keeps my attention always...Good job.

[@TheFixerHomeRepair]

Great to hear! Thanks, Dusty!

[@patricknewkirk8616]

Thank you for all the detail in your video....makes me feel alot better about "straightening" my 1850's floors. Keep up the good work

[@wannabetrucker7475]

I have a 1940's house and your videos are very helpful in addressing various issues. 👍🏼

[@TheFixerHomeRepair]

Great to hear! Happy to help!

[@Y_I_DIY]

Safety squint works everytime 😂😂😂 until it doesn't lol. Awesome video. You do such good work. Really nice to see and great job on this one.

[@mm2pitsnipe72]

This has got to be the absolute best channel for " How fix shit in a real old Northeast house." I feel you brother. I have an early 1900's balloon -framed / dutch roof colonial. Level and plumb doesn't exist. We just try to make it "straight" or at least no "wonky'. I had "framing" with bark still on it.

[@toonkrijthe7565]

We have a house build in 1924. Old houses have style and stories. Some stories turn into nightmares and others are lovestories. We are not in the US, but it is still interesting to see other people fixing up old houses especially when they are already living in it.

[@KevinDrevik]

A lot of work, but it was great the way you explained why you were doing it, and the step-by-step process to get it done correctly!

[@otakelblanchemanor0659]

I do enjoy your videos! As a 62 year old woman I probably will not be doing this myself lol I'll sit there and supervise! No I won't be one of those older adults but I do feel I somewhat confident from watching your channel, I'd know if the job was up to par!

[@TheFixerHomeRepair]

😁😁

[@jeanchisnall1462]

Enjoyed your post. You did stop me doing my household chores. Jean from Rochdale Lancashire 🇬🇧

[@aaronmcghee2837]

NOT MARIO!!! Looking good man... i was jonesing for an update and then boom! That notification hit.

[@samuelhaynes4877]

Why that's a super adjustable hanger customized. 👍👍👍

[@m.pav.8397]

You are very fortunate to have the knowledge to do these things. EXCELLENT JOB!

[@TheFixerHomeRepair]

Thanks, Matthew. I do consider myself lucky and I am trying to spread my knowledge to help others. Like you! Thanks for watching! Hope my videos help you!

[@robertwayne3567]

Wow. reminds me of my days flipping old houses! We definitely did a lot of jacking and creepers. Illusions... level vs parallel lines, Ha. Great work!

[@petehafner1659]

That was a ridiculous amount of work! The end product looked like it was done before the house was built. Great work fellas! Go get a massage. My back hurts just watching you guys.

[@Wicked1TN]

"Let's not look at that", words to live by!

[@iamwhoiamd7056]

Wow, what a video. Awesome job!!!!!!!!!!

[@TheFixerHomeRepair]

😁👍 Thanks!

[@geekbruin]

Very satisfying watching you fix all that the right way. And the cut nails were quite a surprise!

[@cynthiacarter532]

Wow, nice job. You got a new washing machine I noticed. Kids and their needs can be hard on appliances!

[@AutoFixYT]

That floor cam footage was AWESOME, I don't know why but I thought it was crazy seeing that floor go up. Also, a tip for hammering in tight spaces like you had to do when you sistered up the floor joists (hopefully I used the right term lol)... turn the hammer sideways and hammer with the side of the hammer head. You get a little more swing in that way.

[@TheFixerHomeRepair]

Yeah I was hoping it would be a cool shot. And yes! That is a good tip! Should have done that! Thanks for checking out the video!!

[@AlexeiTetenov]

There's a new battery operated black and decker auto hammer that makes it easy to hammer nails in tight spaces.

[@Because_I_Have_To]

It was the cry for help at the end that took me out!!!! #relatable 🤣🤣🤣

[@eltonnoway7864]

13:26 - hammering the joist into position on each sill...Nope! I beefed up my sagging floor, same scenario as yours but instead of trying swing a hammer in such a tight space I placed my two bottle jacks horizontally at each sill location and jacked the joist in place. Plus the jacks held it firmly in place I got in thoroughly secured. Rule of Thumb: To use a bottle jack horizontally - The pump must be lower than the reservoir. (REF: the reservoir is the cylinder that contains the jack piston and the pump is where you insert the pump handle). Just open the release valve and lower the piston completely then close the valve completely. Place the jack on its side making sure to position the pump below the reservoir. Place the jack in a horizontal position with one hand and use the other hand to operate the pump handle pumping side to side until the base of the jack and the face of the piston are against the support structure and the object you are moving. Also, couldn't understand why you decided to fight gravity by applying the adhesive the to face of the joist you were installing (and risk glue dropping on your face or Mario mat 20:32)... instead of applying it to the face of the joist you were attaching the new joist to. It might sag a little but at least it would fall on your head... but in all fairness to did admit it wasn't the best way to do it. 😉

[@mrcryptozoic817]

Hammering nails into those new joists made me think - perfect second use for your palm nailer.

[@snoroof58]

Your videos (and techniques) are outstanding and they remind me of the early This Old House shows where the houses were much more modest and not multi-million dollar houses. Thank you for bringing the helpful demonstrations back down to a much more affordable although highly proficient level.

[@deannaoverstreet4146]

You are a great carpenter! Thank you for sharing!

[@TheFixerHomeRepair]

Thank you for watching, Deanna!!

[@michaellicitra7632]

Next time you want to adjust aa joist that has sagged, you should try to cut a kerf in the joist center or high spot. The cut would be about 2/3 through the joist depth from the top of the joist down. When you make the cut and jack the joist up to the desired height, the saw kerf will open up slightly. This will allow the joist to be easily raised and after the final position is reached you can then install the sister to mend the original joist. I would add a shim in the saw kerf of the original joist before installing the sister for added stability. Doing it this way you isolate the movement of the joist only between the two girder locations and you release the preload due to the uplift. The downward load developed as a result of the jacking of the joist will be gone and will eliminate the partial return of the joist downward after you release the jacks and illustrated in your video. Good job..

[@samadamms3432]

If you make the cut from the top, jacking it will push the joist outward. If you make the cut from the bottom the kerf will close and there will be no spread.

[@Dllsfn72]

Surely wish I had your talent bro! Your amazing at what you do

[@terryhanna777]

Great video!! I'm always so excited when I get notified of a new "Fixer" video!!

[@TheFixerHomeRepair]

😁😁 Great to hear, Terry!

[@ABeans07]

Man you made my notched board look like childs play compared to what you got going on. Nice work.

[@elisha052550]

Love the end.. 🤣need friends .. somebody to help me.. u r doing great

[@jessicaphillips8734]

absolutely love this! I'm so invested in this project! I was SO excited there was an update. when I first found your channel I think I binged everyone of your videos 🎉🎉 so good! love your humor and your work sir 👏👏👏

[@turtuhl]

Best video yet. Really helpful to see the trouble shooting and logic. Can't wait for the next.

[@luckyduckie2000]

Love your videos. I live in a house built in 1900 and remodeled in 1963. I feel your pain. Great job.

[@yr1491]

It's always a pleasure to watch your videos. Keep up the great work! I'll be on the look out for your next video. 👍

[@cn3121]

Nice indoor project! That oil burner is running every few minutes! Stay warm!

[@melindamosbey8257]

Always love watching!

[@teresab6383]

I need to learn from you. I have a mantel to install and board and batten put up. Thank you for all the videos

[@martymaddox7828]

Waiting for the next phase……enjoyed this one very much……great job as usual!! ❣️😊❣️😊❣️

[@scrapretroetc6775]

Wow!!! What a job. Well done. Great camera work, too😀

[@michellegilliam2892]

Really great info showing real situations and the right way to fix it. Thanks so much!

[@ca6177]

Such a great job! A really complicated job, but as usual, you "nailed" it! 😉

[@richardmelendez8858]

Awesome, this is the only video that I have watched and truly enjoyed. I can see that you a real carpenter with a lot of experience. Your are showing every step of the way the correct way and your doing this by yourself. First time for me subscribing to any video and I will be watching all of yours. Thanks, keep up the excellent work.

[@ryanwestgarth1835]

Fantastic job as usual. I'm in the uk and it's still the way I would have done that. Solid as a rock and should never move.

[@jwcsfsky9900]

Really enjoying the true "home improvement", Matt. Thank you for sharing your plan at the beginning before jumping into the how-to videos. One question... I noticed early in the previous videos that it looks like you've done work to the back bedroom. Any chance of getting a walk through just for fyi. I realize it is probably your son's room but it would be good to see your work in there. Thank you for sharing with us and I hope the family is healthy and happy.

[@TheFixerHomeRepair]

I could do a quick tour… I basically did it the same way as the master minus the built ins but might make for a good video.

[@darellsunderlin4670]

Man what a cluster f--- looks like they re did things 3 or 4 different times!!! Great job .

[@aidenschultz1981]

Another awesome video and a great demonstration of making the floor 'true' vice level. You certainly have more patience then I would have lol

[@timothyohliger5888]

I've worked with many many bottle jacks in my life and 9 out of 10 of them bleed down over time. I always use a static post to follow my lift and catch/stop any bleeding off. NIce Vid, great work! Keep it up!

[@suecapra5005]

I'm always so amazed by you and your house. It's a good representation of my own house in rural Colorado. It was built in 1915 and has many changes like yours. I have the cut joists, homemade stairs that are not a good thing. I get information from each of the videos. I even have stupid arches where they don't have any value. Thank you for letting us in on your trials and fixes, Sue

[@zakman9244]

SORRY , But people who do work like the way you're doing it is something I look for and try to avoid work done half-something . Trying to be respectful in wording . But you make more of a problem or mess for the next person who does things right the first time and get it all done correctly . You are trying but bottom line is your work is what is referred to in a very polite way , " Putting Lipstick On A Pig " just to get by for the time being . Which is a disaster for future professional remodeling work ! Sorry , I'm just past halfway through your video and just have to shut you off !! I'm the man people call to get it done right or correctly so the owner can add-on or do some other work to their home !! All I can say is WOW !!! RUN AWAY FROM WORK BEING DONE LIKE THIS !!!!!!

[@rachaelt3294]

We have an old janky house built in 1901. The walls upstairs had to be reinforced with drywall since the horse hair plaster was crumbling underneath the weight of 4 layer of wallpaper. I feel your pain.. lol

[@jennifermartinus4929]

Great work, Matt. Waiting for the next one.

[@paulpeligri6186]

I just love your videos. I’m so bummed when they end. Great job!

[@GreenVegan816]

Wow, my kitchen floor is very similar to yours. My fridge has a 2x4 under it on one side and a cabinet on another wall does also. You did a great job on this video. It was cool how well the floor cam let us see the floor lifting.

[@T.E.P.]

It’s soooo cool that everything you did improved what you wanted before our eyes. Super perfect vid capture thinking ahead to grab that. A+

[@mocobb4791]

Very good job! I'm enjoying this series.

[@lynnew5619]

This was a good one. Great job. 👏

[@UToobSteak]

I've been leveling and replacing joists and subflooring in our old 1945 house. Talk about a chore... Get a couple small metal plates to put on the bottom of your Jack posts, it'll keep the bottle jacks from pushing into the wood. I split a few 2x4s before it dawned on me. Lol

[@dalekriescher7462]

Wow you did a very nice job

[@T.E.P..]

Excellent project and you do such a great job with all of them and a super job on the vids too. Working on a 1911 building in MN and this is an issue everywhere in this building. Hope your week is going great Matt!!!! thanks man

[@Nonsense62365]

It’s recommended to install carriage bolts when sistering joists together, there’s no structural advantage to using construction adhesive like Liquid Nails or loctite. It’s a waste of money and time! I’ve watched hundreds of episodes of this old house, professional Contractors and Sub Contractors that do this for living and they never use construction adhesive to sister joists, they use carriage bolts! Carriage bolts are much thicker than nails they have a much stronger sheer strength that nails cannot provide. construction adhesive is only used on the top of Floor joists to stop the creaking noises from 15/32 or 22/32 plywood that you’re laying on top of the floor joists referred to as sub flooring. I recommend that you consult with a structural engineer based on all the loads that you’re gonna put in that kitchen and in your house. Example if you’re going to install granite countertops they’re extremely heavy and you’re gonna need to better support your sub flooring. Also you should install 2x8 blocking in between the spacing of your floor joists every 48” inches that will take the load from one floor joist and pass it along to the next floor Joist, it’ll provide better Strength and better rigidity of your floor joists and floors. that’s exactly what I did in the my basement. I removed the 3/4” wood X bracing. It provides very little structural support!

[@Brooklynraised68]

Dam bro I love your style of work I have to do similar work to my house you taught me a lot thanks for sharing

[@TheFixerHomeRepair]

Great to hear! Hope my videos help you out!

[@Brooklynraised68]

No doubt

[@crinkle2649]

This is a perfect example of why there are rules about what you can and can't do, and why there are inspectors now.

[@crinkle2649]

The floor cam was cool 🙂

[@paulmonk7820]

For easier access to the washer and dryer, turn them facing each other and adjust the space as needed.

[@AhmedTesjeel]

Great job , thanks for the video

[@tubeiferous]

So interesting to see someone else dealing with the same problems we have encountered in several old houses. It’s amazing how previous owners (and window installers!) just cut out whatever gets in their way.

[@PimptatoPCs]

I would give Husky customer service a call about that jack. Hydraulic seals don't last forever, but they might warranty it. Worth a shot.

[@TheFixerHomeRepair]

I will do that!

[@jodirauth8847]

That's was alot of work for such small area but oh so good when you see you have straightened up the floor

[@michaelplays2449]

Great video, very enjoyable. THANKS 😁

[@nolongeramused8135]

Lift the whole house off the foundation, level that, then reset the house. 😁

[@TheFixerHomeRepair]

Haha eazy peazy!!

[@MrFatboy192]

Nice to see you are wearing ear protectors!

[@Ticonderoga12]

How funny! I have the exact same issue and setup u have and i have to do the same rehab lol

[@robstephens]

How about some liquid floor leveling compound to solve some of the tilt in the floor?

[@tinymew]

You are a genius! I really love your videos, wait them impatiently, but please, please, use safety equipment

[@tommycho9068]

Great work. Thank you for sharing your experience.

[@thanhduong9145]

Yo ur home is similar to mine lol. I just paid $1800 for a contractor to 2x sister one of my joist and also rewire my electrical. Love ur vids.

[@nigelmiller5860]

Absolutely fantastic video loads of information, can't wait for the next video thanks 😀

[@lindarosenthal6835]

Wow. Nice job.

[@tbarg86]

Love your work

[@deborahhaynes8361]

Love it! Looking forward to more content.

[@Roconno131]

Love it! When will we get an update of the basement workshop and flex sealing the other walls?

[@TheFixerHomeRepair]

Thanks! I will try to get to it in the summer. This hallway/bedroom/kitchen needs to be done first! Thanks for watching!

[@MichaelScott-es5gy]

YES! I've been waiting for this video haha

[@qpwodkgh2010]

Great video. Get those safety glasses. You can't replace your eyes.

[@robstephens]

If you have any water leakage through the slab, you might want to try a sealer from Sani Tred. I used it once and it completely stopped the leakage. The only downside to using it is that you have to use their adhesive if you want to install a tile floor later.

[@jerrythecoo3295]

Awesome video!😎👍👏👋✌️🍻🇨🇦