How to Fix into Insulated Plasterboard

[@CharlieDIYte]

🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. ☕ Help support me on Patreon -www.patreon.com/charlieDIYte (includes Discord access). 🛍 Join me on WeShop and earn shares every time you buy! - app.we.shop/join-charliewhite

[@valborchardt3596]

Thanks for the update charlie, good to see you. Take care

[@CharlieDIYte]

Thanks Val. You too.

[@jamesdouglas6652]

Good insight. However, what about situations such as installing curtain poles which usually have mounting brackets with 3 closely located screws? Most of the newer fixings such as in this video are just too fat to fit so closely spaced as curtain brackets require. It seems for such situations the screws and plugs/fixings need to be long and slim to a) reach back into block work behind the insulation and b)for the screws to stay narrow enough gauge to work in the size of brackets’ screw holes. This type of situation is cropping-up more and more….

[@theoriginalchefboyoboy6025]

I like the DuoPower fixing, I like that they give you a fresh drill bit with every package. Word of caution though for if you have to back a screw out of any fixing - sometimes the screw grips too much and can end up loosening the fixing from the wall unintentionally, basically ruining the hole. Also, DuoPower makes a toggle bolt, hard to buy in the US, but it is narrower than most conventional toggles. Wouldn't use it for a tv mount, but for pictures frames and such, it can be a jobsaver...

[@superamario6464]

Thanks Charlie. Yet again perfect timing as I'm about to hang up some shelves and frames shortly this week

[@CharlieDIYte]

Ah, awesome. Drop me an email if you've got any questions. 👊

[@superamario6464]

@@CharlieDIYte Thanks ever so much Charlie. I may just do that :) all the best to you and family

[@tworiversworkshop6111]

Thank you for a very helpful and informative video!

[@mwludlow]

Useful video. I used bullfix to hang a vertical radiator and it seem to work fine. Now I have to fit shelf brackets onto insulated PB but they have ‘keyhole’ screw holes. Which would be best for that? I’m guessing the hollow wall anchor as it doesn’t rely on the tightened screw to lock onto the rear of the board?

[@RH-nk7eo]

Yesterday I tried the bullfix (the extra large ones) into 100mm cellotex and I had to use a flat head screwdriver to shave some insulation off from inside of the hole otherwise the bullfix had no chance of opening on the inside. Watching your video I think the better option would have been to get the regular sized bullfix!

[@xxwookey]

Really useful thanks you. I was hoping someone had tested this. The same test in XPS-backed sheets would be interesting as that's a lot more solid.

[@garethcurtains5176]

Having just had insulated boards fitted to my house, i went and bought the Duopower 8x30mm plugs. Try as i might they didn't work. Turns out they have put plaster boards over the insulating boards which already have plaster board on. Before i waste more money, do you know if the longer ones would be suitable?

[@CharlieDIYte]

D'you mean the 6x30mm? Yes they're not great in my view as they're not long enough to open up behind anything. Check out this video. Maybe a metal wall anchor with the extra long sleeve. kzbin.info/www/bejne/gJXYaoV_mZygb5Isi=bKYwGgJDG353HZN-

[@thomasschafer7268]

For new house builder use 12mm OSB behind. No compromise!!!

[@chrisfurlong1275]

Great videos. What would you recommend for hanging kitchen wall cabinets on a wall made up of 15mm PB/4mm rubber soundproof material/15mm PB/25mm sound insulation. As the gap behind the PB is only 25mm to the block work, but the PB is 34mm thick, I'm not sure what to use

[@MalcolmJames-sg3zg]

Another great video thanks Charlie

[@CharlieDIYte]

Thanks, I really appreciate that 👊

[@mattbarnes9853]

Another handy vid, thanks. I’d love to know your view on what to use on hollow doors, as all the ones I’ve tried on our bathroom door have failed within a couple of weeks.

[@CharlieDIYte]

Thanks Matt. The Geefix would work best - provided the circular plug which from memory is about 25mm dia is covered by the hook or whatever it is you're attaching. You may just need to trim the plug down to the thickness of the door surface, with a junior hacksaw or belt sander but once you've done that it would be rock steady.

[@markhurdus-nc2sj]

Which insulated plasterboard fixing would good enough to fix a Rointe radiator to 62mm insulated plasterboard? I’m thinking 52mm anchor or the Stella?

[@arturlukaszewicz3375]

Which one to choose for screwing the radiators to the k118 board ?.

[@CharlieDIYte]

Tricky. You should always put a board behind if you can because of the weight and anchor into that or the brickwork but if you can't then probably a few anchor fixings.

[@arturlukaszewicz3375]

Thx.

[@paulprescott7913]

Thanks Charlie very interesting. Anything that stops anyone using amazon is good with me.

[@CharlieDIYte]

Thanks Paul. Yes, give it a go and let me know how you get on. I'm literally buying everything through it and will be cancelling Prime when it expires in Feb. As I said to Carl just now, take a look at stuff on eBay (mostly free delivery - and some really good business sellers on there shipping with DPD). Wickes seem to have got their act together - impressed with their efficiency with the things I've bought from them, and Toolstation are also on board. Once WeShop sends you to the website - or if you land there direct via the "W" shop now button bottom centre, you can log into your account as usual and the purchase will be picked up soon after. 👊

[@heidelbergrodriguez6294]

Hi great video any advise for fixing on a external insulated wall?

[@CharlieDIYte]

D'you mean on the outside? What are you trying to fix? You don't want to compromise the vapour barrier or the integrity of the insulation.

[@clairegarcia7286]

Can you use spring toggles at all on insulated plasterboard? Or is there not enough space for it to open properly?

[@CharlieDIYte]

Not enough space for them to open unless you get creative and gouge out behind the hole but then you're compromising the insulation.

[@rednose66]

Thanks for the video Charlie. I have a question. On the walls of my home in Spain I have 40mm insulation board (not plasterboard) covered by plaster. Any idea what fixings I could use please. Nothing too heavy - curtain poles and pictures. The advice given to me is a long drill through the brickwork behind the insulation and then a rawl plug with a 50mm long screw. Is there anything better I could use please?

[@CharlieDIYte]

How thick is the board?

[@heffo1992]

I need to hang a mirror but it needs the screw to remain proud to hang on so I'm stumped as to what fixing is suitable.

[@CharlieDIYte]

Probably a metal hollow wall anchor as featured in this video

[@helenpack8251]

Great video! I'm currently building up to doing fitted shelves and some of the walls are plasterboard over insulation (had internal wall insulation installed recently). What fitting would you recommend that will handle the added thickness of the battens I'll need to use to support the floating-style fitted shelves?

[@CharlieDIYte]

Thanks For floating shelves maybe a wall anchor. Set it as usual and then buy longer bolts to fix the shelf in place. Floating shelves are always problematic in plasterboard though as they put a lot of stress on the fixing.

[@helenpack8251]

@@CharlieDIYte awesome, thanks for the advice :)

[@dnbsmurf]

Hey Charlie, great videos, you’ve really helped my DIY journey tremendously. I have an idea for a video for you. How about best ways to strip paint from door frames/skirting etc. I’ve just spent about 20 hours doing one doorframe using a heat gun, scraper and mouse sander… it was such a long and arduous task. I’d love to see your thoughts on the best way and technique to strip paint. Keep up the good work! Cheers, Ryan

[@CharlieDIYte]

Hi Ryan, thanks for this. Really chuffed you're finding my vids useful. Funnily enough I have a paint stripping vid in the pipeline. Will probably do it in a month or two. Basically I got sent an infra red stripper but actually found you can't beat a good old fashioned heat gun. I'll give you a shout out when I do it 👍😉

[@ThomasHarrison-v5g]

Hi Charlie, thanks for your videos, they have helped me no end in the past. I’ve recently moved into a new build and going through the process of adding curtain rails and it’s raised a new fixing issue for me and wanted your advice. So the plaster board is around 12mm with approx 20mm cavity behind which is a metal lintel. Most fixings are too big either in depth or say in the case of the bull fix are too wide, (I’ve 2cm approx between two screw holes on the curtain rail bracket). I’ve looked at the method of drilling through with an hss bit and screwing in with a 0.5mm larger screw but I don’t trust my accuracy of drilling and it will probably end up on an angle. Any suggestions? Thanks, Tom.

[@CharlieDIYte]

Hi Tom, did you see this vid kzbin.info/www/bejne/gJXYaoV_mZygb5Isi=QYNAfsHIJX87q_jw Maybe the T bolt would be your best option. There's a segment in the video about it.

[@ThomasHarrison-v5g]

@@CharlieDIYte I did see it before and looking back on the video now I’m not sure why I didn’t consider it. Maybe I thought it was a bit overkill but having looked at all the other options on your video it really does seem the best one. Thanks Charlie 👍

[@adammckenzie8769]

Would all these work fine into cold storage panels??

[@CharlieDIYte]

Not sure what they're made of.

[@laurisaastamoinen1579]

Thanks for the video Charlie. Which plugs would you recommend to fix shelving to a double thickness (~30mm) insulated plasterboard?

[@purplespark8]

Hi Charlie. Great vid. I don't know which wall I have where I want to hang my TV. I'm guessing it's dot n dab, since it's facing the outside and using a stud-finder doesn't really show any studs. I tried Corefix 100mm, but two of them are loose. What I don't understand if I should go for a Corefix 120mm, or use something like a Bullfix. Any suggestions would help. Thanks

[@CharlieDIYte]

There are steps you can take to work out what wall you've got as discussed here kzbin.info/www/bejne/gJXYaoV_mZygb5I. If you can't figure whatever reason anchor into the brick behind then a Bullfix or T-bolt should do the job.

[@patrickflanagan8008]

This is very useful...thank you.

[@CharlieDIYte]

You're very welcome Patrick. Thanks for the comment. 👊

[@TheSimple46]

Just the vid I needed, thank you 👌

[@annapryor4494]

Hi Charlie I'm a total novice but enjoy your videos. After many years had my back room replastered/skimmed on 1930s blay house. New ceiling so know it's double plaster. I am putting up a plastic curtain track over French doors from the ceiling so watched your video. Bought the stella multifix but the screws are too big to go through the fixings for the swish track. Any suggestions?

[@CharlieDIYte]

I forget what the Swish brackets look like. Can you make the hole larger with an HSS bit?

[@annapryor4494]

Thanks very much Charlie. My husband , who is worse than me ! Kept saying no don't touch em . So now I can show him your advice and have a go. 😀

[@carllamb6711]

Hi Charlie Hope you’re okay mate just to let you know I’ve downloaded the app and I’ll start some of my shopping from there now thanks for the heads up mate👍👍

[@CharlieDIYte]

Hi Carl, good try hear from you. Nice one. Conscious it was a long segment on WeShop but I'm literally buying everything through it now. eBay is worth using - mostly free delivery and a lot of stuff from the business sellers comes via DPD. Wickes used to be hopeless but they've realty got their act together - been very impressed with the few things I've bought through them. Also Toolstation is on it (set up my the founders of Screwfix and arguably better. Let me know how you get on. Once you arrive at the website from WeShop you can log into your account as usual and the purchase will get picked up soon. 👊

[@barrydimelow822]

Nice video👍 What about plaster board that has been dot & dabbed onto the wall then a gap then into brick?

[@barrydimelow822]

Just looked on your website and found this video - thank you. kzbin.info/www/bejne/nKmcYYmXmb2GjqM

[@CharlieDIYte]

You want to use a Corefix or Rigifix for this. I did a vid on the Corefix kzbin.info/www/bejne/nKmcYYmXmb2GjqM

[@mathillman]

i think you should try this on larth and plaster and see how you get on

[@CharlieDIYte]

For lath and plaster I'd recommend the Geefix.

[@MegaMetinMetin]

Duo power for general stuff Bull fix when nothing else is working

[@CharlieDIYte]

Duopower is a great universal fixing, I agree.

[@omfd100]

In your professional opinion what would you use to fix kitchen wall units to 100m celotex and 12.5mm plasterboard? Thanks great video

[@robinstrahan]

Another quality insightful video, thanks Charlie!

[@CharlieDIYte]

Thanks Robin 👊

[@rayphillips6060]

@@CharlieDIYte how do I know if my plasterboard is insulated

[@joychip5994]

I downloaded we share but I still don’t understand how it works , I know I’m a bit thick. I know if I buy something for £100 you get a small credit back? But what do I get , I have watched a video but still don’t get it 😂

[@CharlieDIYte]

Hi Joyce. You either search for the product you want at the top. It'll show you a range of retailers selling it and you click on the one you want and then it takes you to the retailer's website and will record the sale in your transaction history. You get WeShop shares to the value of 20% of the purchase price. Or if you know which retailer you want to buy through you click on the "W" at the bottom centre of the app.. It takes you to their website and you buy it as usual, logging into your account on their website if you have one. The purchase usually gets picked up a couple of hours after - you'll get an email, and it gets recorded in your transaction history on the WeShop app.

[@joychip5994]

@@CharlieDIYte thank you Charlie I was looking at foot locker 😄

[@teversoncoleman496]

Wouldn't have been a better test to hang weights on the brackets as a better test to see which one takes the most weight instead of just screwing them into the plaster board.

[@CharlieDIYte]

I did a load test in the last video towards the end. So no need to repeat it.

[@Pete.Ty1]

👍👍👍

[@CharlieDIYte]

👊👍

[@SKMusic1985]

Oh wait, I just found this 😂 ahaha

[@number1pappy]

"Fixxings" ??? Lol! Is this like, thing a bobs? Do dad's? Whatcha ma call its?? What nots? Lol 😆🤣

[@CharlieDIYte]

🤷‍♂️😉

[@mrboyban]

Those are not good to hang cast iron rads.

[@keithr1814]

Total nonsense

[@dankirk4186]

How’s that then?

[@CharlieDIYte]

Yes, it would be good to get a bit of clarification as to why it's nonsense, but these people never do 😉

[@SKMusic1985]

@@nrgf100 It’s in another video you bell

[@nrgf100]

@@SKMusic1985 thanks for that, no need for the insult though

[@SKMusic1985]

@@nrgf100 bell is a loveable jab. If I’d added the ‘end’, then it would’ve been an insult 😇

[@TontosVotanPaSocialistas]

Plasterboards. Dont like them.