How to Fix iPhone 12 CPU - Swap for Data Recovery

In this video I show my full process for a CPU transplant. This includes preparing the donor board, reballing the CPU and NAND, and moving the EEPROM. This technique is mostly necessary for severely physically damaged and bent motherboards, which causes disconnects under the CPU.
If you want to send in your own iPhone for Data Recovery, fill out the intake form here: www.iboardrepa...

[@TheArtofRepair]

Always love seeing my friends stream! Keep it up! Not enough people showing the fun stuff =)

[@iBoardRepair]

Thanks Justin! Always good to hear from you!

[@allaoui38]

Good but what about EEprom, not needed to be changed?

[@iBoardRepair]

I made a note at 38:46 about eeprom. For a moment I forgot to record, and it was then that I changed eeprom.

[@sudheerm.s6792]

Please mention temperature and air during the time of blowing.

[@lucachiappini7155]

Hi! My iPhone 12 is stuck on the apple logo. Do you think is possible to swap the nand and cpu to another iPhone 12 so I could transfer the info to a ITunes? Thank you!!!

[@iBoardRepair]

Hello, I could surely help you get an itunes backup to recover your data. Fill out the intake form at my website: www.iboardrepair.com

[@lesliewhicker7409]

Why don’t user backup there phone to icloud

[@bhavinbalsara5192]

While removing cpu your smd 861 how much temp and air brother?? You removed like a butter.

[@iBoardRepair]

I just use the normal temp I use for all other types of soldering, which is about 360c and 60-70 air

[@MrSkar87]

how you deal with PMIC,does required reball?!

[@fs5243]

Nice video! We have a 12ProMax that a local repair shop told me the CPU was cracked due to a drop. Can you confirm that a CPU can’t be replaced and still allow data recovery? That’s what I’ve found from reading online due to the encryption design. We’d like to recover the data but I don’t think that’s possible. 😟

[@rimartin6789]

Where can I buy a cpu replacement

[@hbmobile3985]

Microscope name please💓

[@ceejay_gaming9636]

Aaron where could I be going wrong ? So I have attempted CPU work on the A14 series about three times now and everytime I turn it on after a CPU swap I get a shorted ram, where am I going wrong is it the heat I use when removing the CPU ?

[@iBoardRepair]

Just need practice. I don't know where you are going wrong, it can be anywhere. Too much heat, too little heat, too much pressure, who knows.

[@besarlimani7144]

I saw your post on facebook and decided to take a look at your video and I would like to say that I really enjoyed your video, my congratulations!! I have some questions to ask you if you don’t mind to answer me… How millimeters is you nozzle, what is your temperature when you removed the CPU and when you cleaned the CPU? I appreciate it sir.

[@iBoardRepair]

I'm not sure about how many millimeters. I don't usually measure things like that, it is just by feel. My temp when removing was about 365 - 370c and about 220c when cleaning. But I am not strict with my temps and I sometimes change them. I think some people do it hotter then that. Maybe some do it lower too.

[@Dromedary-l7f]

Which CPU holder and stencil are you using?

[@iBoardRepair]

maant

[@trilexfix]

CPU swap wowawiewa that isn't an easy job cause the chip has so much balls good job

[@iBoardRepair]

Thanks for watching!

[@titotinton]

thanks Aaron

[@iBoardRepair]

Thanks for watching!

[@Mradam912]

The quick hot air is so noisy i hate it . Very good job bytheway ❤️❤️❤️

[@iBoardRepair]

Also my fume extractor is noisy! Sorry about that!

[@brendahhm]

Which would be a better hot air station in your opinion?

[@Mradam912]

I have the old quick-2008 also the one that you have 861 and i prefer the 2008 , but in the end everyone can master his own machine , so for making videos its really disturbing when live videos you make .

[@sk8ar4eto]

Great content as always. Wanted to ask what temperatures do you use on the iron and hot air for the underfill remove on the CPU ?

[@iBoardRepair]

I like to use 200 - 220c on the hot air when I am just using it to support the iron like that. Iron was at 350c. I am not very firm with my temps though and sometimes change them.

[@farhan-op]

incredible work champ

[@iTechBoardRepairs]

What a spectacular job 💪💪💪❤❤❤

[@iBoardRepair]

Thanks for the support!

[@nazinazir5289]

Good job dear bro .where you stay at country

[@iBoardRepair]

I am in USA

[@vandanpatel3212]

Where is eprom he Never change it

[@iBoardRepair]

I made a note at 38:46 about eeprom. For a moment I forgot to record, and it was then that I changed eeprom.

[@vandanpatel3212]

@@iBoardRepair Understand Thanks you

[@raulmorel1872]

Done!!!!!!

[@iBoardRepair]

Thanks for watching!

[@politips_]

WoW !