How to fix LED LCD TV black screen no backlight, TV disassemble, testing LEDs, ordering part, repair

[@TampaTec]

Part 1 kzbin.info/www/bejne/kGKndp6JnNqKqsk shopjimmy has repair kits, LED backlight strip tester- amzn.to/2qa6QVF *affiliate link

[@soniahussaintyyy3023]

ifraz the best

[@abdulakeemo.abdulhamed8055]

Tampatec hi please what website can I order the LCD light from and like how much does it cost

[@parkashsh1120]

Nice

[@Dim4323]

So dose those Backlight are the cause for them to flicker

[@jadunundonkhedarnuth6717]

Tampatec ,i need help to repair sony tv model klv46x-350a.power board ok,maybe mainboard faulty

[@y2leon843]

just fixed my son's tv last night, I paid 30$ for the leds on ebay and 45 minutes of my time, thanks man!

[@henryperth1524]

Which shop at ebay

[@awaitingthetrumpetcall4529]

This tutorial is 6 years old so you may never see my comment but I loved this 2 part tutorial. I had already done the flashlight test before I found this tutorial but I didn't know what to do next. I checked your channel. I'm glad you're still creating content in 2023.

[@dont_sweat9448]

In the same boat it sound like. I hope I fix mine

[@awaitingthetrumpetcall4529]

@@dont_sweat9448 Just so you know I cracked the screen. It cracked under its own weight. It was super fragile. If I ever try it again I need to make sure the screen does not flex when I handle it.

[@Scrollermania1963]

​@@awaitingthetrumpetcall4529 Someone, in another video, comments column, suggested, using a Clean and flat sheet of strong, Card Board, and Just ever so gently, nudge the screen up, just slightly enough, to Slide cardboard, under the Entire screen, to help raise it up...and out of the way....

[@TampaTec]

@@awaitingthetrumpetcall4529 I added a pt2 link in the comments.

[@Missblaak]

🤗 Thank you soooo much! I fixed my tv! Never have I ever opened a tv up! I am so impressed with myself!!!!

[@billybarr7443]

Stop telling lies

[@jeffrey2809]

@@billybarr7443 wdym lol

[@billybarr7443]

@@jeffrey2809 why you telling lies lad

[@jeffrey2809]

@@billybarr7443 What did I do xD

[@billybarr7443]

@@jeffrey2809 what you mean lad

[@xXFOYXxQ8]

Brother you won't believe what I did after I saw this video. Thanks to you I was able to upgrade my tv backlight even with MORE brighter led strips. I was able to play on my tv outdoor with my friends. You deserve way more subscribers bro. Thank you 💙

[@patrickrose5034]

Can’t thank you enough man! I followed part 1 to troubleshoot and part 2 to fix. My tv works perfectly now. You saved me hundreds of dollars!

[@TampaTec]

Congrats fixing your TV, hopefully still works after these past years.

[@flaminracing270]

Your candid instructions are the best so far I followed. My BRUM TV LED stopped functioning at the beginning of the year. Its warranty had expired but I was referred to the company workshop in Kenya. The company charged me USD 65 to replace them. this was too much and I had the TV returned without repair. I got the New LED from a dealer at $20 and fixed it myself. Thanks so much for this useful information

[@aboutech3901]

Best video about disassemling/assembling TV even after 6 years.

[@jacolyns539]

This clip is very promising, and very educative. So precisely elucidated and needs loads of patients as its absolute delicate handling followed by pinpoint precision. Wonderful presentation which definitely deserves applause and a great thumps up. God bless your hands. Jacolyn (Srilanka).

[@damiendecroos7944]

Thanks for this video, Tampatec! My LG TV was exactly as on the video. I was able to follow all the steps easily. Painters tape worked great to keep the screen and the frame together. I didn't need the suction cup, since I taped the screen to the frame and I was able to remove the screen by lifting the frame. The tester and led strips from ShopJimmy worked great as well. Only negative point is I lost 3 nails by trying to unclip the frame! Then I realized a flat screw driver worked much better! Again, great video and easy to follow. I would add that it's easier when you disconnect all the electronic boards ans remove them, so you don't have to worry about damaging electronic components when you flip the TV

[@joseph_donovan]

Where was that cheeky, lovable son of yours when you needed him to help you? Great video. A classic in TV repair. Bravo and thank you for making and sharing!

[@mikeoleksa]

I used this video and part 1 to get my LG 55LB5900 apart and tested. It's definitely the LED strips. Thank you for taking the time to make and upload this video. Thankfully, I have experience with laptop repairs, including the LED screens. They are very similar except more parts are integrated because of the much smaller size. I get the part where you say that it's not that hard of a repair. It's more getting the confidence that it can actually be done. It only took me about 45 minutes to an hour to get to where the LED strips are exposed. The only thing I did different was using smaller pieces of tape only between the ribbon cables that connect the actual screen to the boards. I just didn't want to take any chances of damaging one of those connections. I ordered the parts and I'll work on removing the old strips. I figured it's as good a place as any to take a break. There wasn't anything frustrating about it. It was very straight forward and this video helped A LOT. Thank you.

[@mathewwebb522]

I would never have been able to fix my own tv. This guy covers everything very well. Thank you for saving me hard earned money and for your shared expert knowledge.

[@williamzhang963]

1:36 "there is a chance you can get hurt, or even damage the TV" Glad to see a TV technician who gets his priorities straight! LOL

[@nolinovio6748]

I watched this video and I was able to 1) diagnose my LED backlit problem 2) buy the tester to determine which LED's where out 3) I then replaced all of my LED lights...all 6 rows of them 4) enjoying my TV that is brighter than ever....Thank you Tampatec!

[@wesleywatkins4779]

I've never posted any comments on KZbin before but I recently had my 50'' Hisense tv go out. While my 2 year old was going crazy not being able to watch Peppa Pig, I bought a small tv as a temporary quick fix so I could tear the tv apart. Even though the one you're showing is a LG, it's very similar to the Hisense I'm currently working on. I was very skeptical about removing the actual tv screen as I'm aware they're very fragile but was more at ease watching you do it. Very helpful video. Appreciate the walk through and explanation of what and why or how to do what.

[@TampaTec]

Let us know your results 👍

[@radus2968]

Still waiting ... Probably he f..ked it up...

[@sibum1959]

You’re awesome my tv is fixed I’m so proud of myself. Thank you for this video I watched a hundred times and followed all the steps. Happy to say I’m watching tv after 6 months of laptop watching.

[@TampaTec]

Congrats fixing your TV 📺 👏

[@barbie4679]

Wow you know your stuff. My tv screen went out but I still have sound. I ended up buying a new 65 inch tv. But as I type this I have the old tv apart and I'm going to try and fix it. I enjoy taking things apart and putting them back together. So this will be fun for me! I just hope I get it working. Lol wish me luck!

[@Muhammad-pz1bp]

Good luck lol

[@AMTRVB]

Hi it's Wayne from Affordable Mobile TV Repair. Very good video, and I would like at add a few thoughts. You can actually repair LED strips when the strips are out of stock. I have been repairing LED strips for 5 years and have few call backs. As long as you decrease you BL setting to 60% and update your firmware(if available), you should have no problems. This week I will be posting the procedure on how to repair LED strips on my website.

[@michaelw7540]

You can also plug up the TV once disassembled and use 99cent Tweezers to test each LED by touching both sides of the LED. The good LEDs won't do anything when doing this but you'll know right away when you get to the bad LED because all the lights will come on because when touching the bad LED with the Tweezers you're bypassing the bad LED forcing a Closed Circuit.

[@jeffweber8244]

Sounds right, unless you have more than 1 bad LED in a strip.

[@buakawfan333]

Thanks so much. Gave my TV a really good deep clean at the same time. It really worked. Changing the LED strips was 100% the easiest and most satisfying part of the job 😂 I did swear a lot when we got to the part where you said we should have removed the TV board to get the white pins out. Still, no big deal. Sorted my TV for £22. ❤

[@JohnDakila]

Just ordered them for my vizio 14strips! Im excited to work on my tv! 😂 thank you for this video! You are a life/money saver! 🙏💪🏽👏👏

[@harrisoncityguy9785]

I liked your very detailed description of what to be careful of in the process of the repair. Very well described and prepared for safety and well organized in disassembly and assembly such as putting the same nuts and bolts together to remember when putting back together again. Very important.

[@omardeleon867]

I have a 49 inch Toshiba that's going bad, some days it works fine, but I'll say that whenever weather gets a little colder it begins to fail, but based on your videos it seems that it has a LED issue. So, I will go for it and open it up to see how it goes. I like your videos TampaTec, they're nicely done.

[@noelscarlett7992]

This was a good fix. I am impressed with the fluent way you went about this fix. Great job.

[@TQStormrider6]

Thank you! I got a TV free for from my neighbor, followed these steps, and fixed it!

[@nintendad2099]

This video has convinced me to just toss my 8 year old LCD tv and buy a new one...BestBuy thanks you. Great video btw

[@kimjones4061]

Yes I agree too much work

[@MapleJokerRofl]

Yeah, this is for aficionado

[@saraeusse4358]

Same LMAO

[@Missmeohmy7]

😂😂 Same !!!!

[@GarrettRC5thscaler]

Sheeeeesh Bruv. Definitely a done deal.

[@garydinnebeck6420]

Great job tampatec, followed your video and wala I replaced all leds and assembled per your instructions. Vizio Tv works great. a big thanks.

[@Mr_Joseph979]

this info is freaking Gold. I didn't know about the back light tester. I would test them individually...not anymore. thanks alot.

[@katjamilisav9789]

Wow, we did it! Thank you for your amazing and clear explanation, we saved so much money because of your video!

[@nando2273]

this video was very helpful, thanks for the step by step. 👍😊 my TV it's fixed now.

[@erieliver8887]

I fixed my LG 50LN5700 with your instructions and new LED strips purchased from Shopjimmy. Thanks so much for your great step by step instructions!!

[@DizzzyKipper]

Love all your videos.Your repair and how to Is what brought me to your channel.Keep up the good work. Thank you.

[@learningstock4783]

SUPERB KNOWLEDGE... you made it easy even for a lay man.. Excellent job guys !!

[@SureWinpredicts]

Thanks mate for a really educative video..... It is really very helpful in not only replacing the led strips but also bargaining the repair cost......

[@TampaTec]

sachin bharadwaj true 👍

[@7867mousekiss]

Dude! Awesome video. I had the exact same problem with my Vizio tv. I did all the troubleshooting and low and behold! It was the led strips. I ordered the kit from shopjimmy and followed your video. Boom! It worked! Thank you!! I spent $72 instead of $600+. Thanks again.

[@billbauer4407]

Great video. I watched part 1 and 2, and you explain things very well and it makes me much more comfortable in taking my tv apart. I have a Samsung 40" that I needs the backlights replaced. Keep up the good work!

[@joyceholtzinger451]

I have a couple of LED HD TVs and I'm going to use your video to help me diagnose and fix them. This is the exact problem we have. I love KZbin vids. I learned how to fix my laptop using a video. Big thanks!

[@omgjoseph2]

good video tampatec follow your steps and fix my55" LG TV looks awesome thanks for the video

[@chrishuffstetler8832]

Very helpful!!! My Tv displays the “home screen” for about a second then goes black & only half of the ho,screen picture displays- the other half is dark. Did the flashlight test as shop Jimmy’s video suggested, & see the menu display. Your 1st video helped a lot on trouble shooting & this one is very helpful on replacing LED strips. I’ll let you know how my “repair” goes lol

[@dFreemZ]

How did your repair go?

[@stantheman6411]

Well done!!! Great steps on how to take apart. I look forward trying...

[@davidwood983]

I have found all these videos very helpful for fixing television set's so far I've fixed a plasma tvMy latest is a led set by Samsung parts for it are difficult to find but it has helped having support from shop Jimmy!Very good videos take the mystery and misery out of working on the unfamiliar technologies.

[@ThejasonJaw5442]

These are the videos I want to see more of disassemble repair... My favorite was you show a video how to solder and replace the board in a tv - great video

[@TampaTec]

thanks

[@wamiqfahim9123]

Man you are one informative dude. Extremely detailed explanation. Much appreciated.

[@TampaTec]

Wamiq Fahim thanks

[@wamiqfahim9123]

Welcome mate. Particulary this video has given me a new perspective in troubleshooting my tv. I was watching a movie on it and all of a sudden everything went black. The sound was there so the tv was on.

[@barbaramallienharlan6308]

Thank you for the great Video! I was able to get my TV back up and running, with just a little wait for parts.

[@AdamCieslikOfficial]

One of the best informative videos about subject so far I have seen. Thanks mate

[@francom6230]

All your videos are good bro. This is your best video because you really show how challenging fixing shit is... we all appreciate your time & encouragement. I only fix tv's & other stuff for fun & donate them to needy peeps. btw, I think a 50% success rate is ok 👌.

[@filipecardoso9783]

Great video Tampatec! Your youtube channel is really helpfull and inspiring! Good to see that some technicians don´t mind to share their skills and knowledge with others. Recently my LED TV Samsung UE32f5000AW went complety dark, no picture. I have seen the part 1 video, tried to follow your steps and perform the measurements but due to my lack of electronics knowledge the results were inconclusive. The T-CON test showed image with the flashlight. I have totally dissambled the tv and tried to test the backlights strips with a 9V battery, a LED and 2 probe needles. First, I removed each led strip and tested with each led of the strip individually. In all leds of all strips, the Test Led turned on (full brightness) but the led itself didn´t. With the led strip back in place on the led interface, I performed the test like you (minute 7:34), none of the stripe´s Leds turned on and the Test Led turns on 4 stripes (last 1 off) but with a diminished brightness, almost none. With this info, can you tell me which part to replace (because I´m complety on the dark...). I apologize for the long comment and I would appreciate very much if you are able to give some tips.

[@adamburke8298]

I could really use some help. Got a broken tv from work no picture no sound. Red stand but light is on but when I press power it goes out. Watched a lot of your videos but can't quite pin point the issue.

[@justinring2239]

Thank you very much for this video in particular but also for all that you do on your channel you've been a huge help to me and you've taught me so much valuable lessons.

[@wolf-1346]

You're videos are the best ones I've come across, no need for me to look any further.. Right on Brother!!✊✊✊

[@TampaTec]

Thanks

[@MerkinMuffly]

This is very good, thanks.

[@liberalmike27]

Question. I took my 50" LG 50UH5530-UB apart, I checked the LED's with a tester I bought. All 12 tested at 16.2V. They all lit up. I did notice the second from bottom had a voltage that jumped around a bit. I was reaching across the table, so I thought maybe I wasn't touching the terminals enough. And once I went over there, it too stabilized at 16.2V. Reassembled it. (sigh??) Tried replacing power board with part from "Encompass," LG official distributor. Turned it on, same three blinks of standby light, then off. I sent it back. I replaced the two long 450V 68uF capacitors, that had little white hairs on the legs, and a slight burn looking spot on back, with good ones. IT didn't work. So I checked voltages through the cable with tester--outside leads showed 64.8 (multiple of 16.2, in series I guess), I got the same 64.8 on the inside two, but the middle one showed a fluctuating 32.4 much like the one I initially tested. So, back to replacing those, do you think? Could it be something else--does that little harness going down the middle (not circuit boards like I've seen on a lot of videos) have developed a short? Do the LED lights sometimes work, but are they still flawed? I don't move the TV much at all, ever.

[@hdmartinez1]

This video was great! I just used to it fix my LG! Thanks!

[@TampaTec]

Hector Martinez congrats for fixing your TV, you saved 💵💵💵

[@ramg7320]

Grate video and well done with clear instructions. I have LCD TV, and half of the screen is more bright but picture appears, but as it is more bright it makes viewing uncomfortable especially if dark video is playing. Do you think it is because of back light? The right part is more brigher than left side. How to fix it?

[@rodrickkabaso1930]

I aso have the same issue but mine happened when I changed two backlights which was defective and the left one is brighter than the right one

[@johng2801]

Great video! Very informative! I feel confident that I can repair my tv in a similar manner. Thx again!

[@TampaTec]

John G cool . take your time and double check your work and you'll do fine👍

[@dylendog]

Thank you for your well detailed video. I am now one proud owner of my fixed TV ......I put my brothers to shame.

[@gregcollins3404]

Nice repair video. Between all the labor doing surgery on a TV panel (which was never intended to be serviced), the cost of buying all the LEDs (and finding the right ones), and the risk of it failing again (because the manufacturer under-designed the back-lighting circuit) - do you find it worthwhile to do this as a business?

[@jasonsmith3573]

my thought as well. I currently have a samsung ua32f5500 for led backlight problem and don't see it as economical to repair as well as the risk of damage. Probably will just return to customer.

[@j.lietka9406]

Shop Jimmy is one source for replacement LED light strips. Is it best to replace all the strips? The 2 strips that were still working are as old as the others. Thank you 🤓 can you test the newly mounted strips before fully reassembling the TV?

[@kevinmcdonald2323]

Great video helps a lot thanks for your time buddy

[@pierrehugues7018]

Where do you get tv screen? Cause I have never seen anywhere the sale it.

[@goldbunny1973]

You make what is otherwise (to most of us) fairly 'terrifying' look do-able : )

[@waynemcdonald3994]

TV BK LIGHTS ON BUT NO PIC

[@andrewsybert5106]

earned a sub...btw my screen is dark as if the contrast is all the way down but the brightness is set to max as well as the contrast I forgot to add that at power up the tv will flash to bright then defaults to a dark screen

[@TampaTec]

If the picture very dark but settings for brightness, contrast and backlight is high then my logical guess few of the LED blacklight strips are bad. Get LED strips at shopjimmy.com and electropartsonline.com

[@andrewsybert5106]

@@TampaTec thank u

[@dailyshibainu8232]

Thanks you are very helpful!!! Fixed my Westinghouse 48 inch tv.

[@TampaTec]

Daily ShibaInu congrats

[@lucbeauvais1847]

Very well done, nice instructions. On your video you ask how we got here and why....... I was curious about esr meters for caps which you made a video about. Thanks

[@randomvideosn0where]

Probably not economically worth fixing, but if you enjoy doing it I guess it's good for a couple bucks.

[@jody537]

That depends on the size of the TV and how new it is. It would cost me $800 to replace my TV whereas I can fix it (including the voltage/backlight tester) for about $150. If I had already had the testers on hand it would be much much cheaper. That's a heck of a lot better than $800 to replace or several hundred to have it repaired. I have only 1 local tv repair place and they charge $100 just to diagnose the problem.

[@jrose92081]

Not too many people do this repair.. My hat goes off to you. Ive done 4 this year already. Right now i am working on an lg 50pj350 50" plasma, the ones that have the 20 kits on ebay to repair the power supply. Ive done the kit install and replaced every board but im still getting the clicking.. Gonna have to really test everything now. Im thinking the panel may be bad..Any ideas? Keep up the great work!!

[@TampaTec]

thanks. clicking hmmm try unplugging a sustain board then turn on TV and see if it stops clicking, common problem for 50PJ340, 50PJ350, and 50PJ550 is relay clicks on and off> IC301, D304 sr104, 2x 220uf caps, f302 2A fuse, R927 2x 22ohm 5w resistors, repair kits at [e-mail] or just replace power board if Va voltage is ok but after relay clicks it goes down.

[@jrose92081]

+Tampatec thanks for the advice.. Gonna give that a shot...

[@jrose92081]

So On the 50pj350 i unplugged the power going to the ysus board and it powers on.. No lighting or anything of coarse but all my power supply voltages are good(va,vs,m5v, standby). Ive tried two different ysus boards with different buffer boards and i still get clicking? Is my panel shorted out? Thanks

[@basheerkhan6040]

fantastic well explained very informative for tv technitions bravo well done.

[@1futuretense]

Good video, few notes - the white screens behind the lcd in my vizio e60 interlocked with the screen brackets, so check carefully when disass-reassemble - I dont know what tampatec uses to turn on the leds, i plugged in the tv and turned it on (lcd was disconnected) that did the trick. - shopjimmy supplied me with the leds (thanks) they were used - i - hope they have a warranty ! they did work - so on reassembly my picture was screwed up. seems there are side tabs that dont connect to anything, yet can screw up the picture. I noticed if i positioned the bad one correctly it would work. so I went to tape it in place and accidentally removed it with the tape! So running out of options (putting it back on is near impossible) I notice that row was fine, the others had issues, so on that same side i removed all the tabs... and it worked!! must be some strange grounding thing. Just wanted to share my experience, THanks tampatec for helping me restore my $800 unit! Last note - I called Vizio about getting the backlights, they gave me their tech support, who gave me shopjimmy....

[@laf213]

will just one failed LED in a strip cause the entire screen to go dark, or would it require multiple failed LED's to cause the dark screen?

[@TampaTec]

Lewis A Fergusson yes

[@FlabberQuestion]

Incorrect, 1 failed LED in a strip and 53 working LEDS (from the 54 total for example) will not trigger the safe mode. You need more failed LEDS for this to happen.

[@whitcwa]

I t depends on the failure mode and the TV. If an LED fails shorted, the others can stay lit. If it fails open, all the LEDs in series with it will go out. My TV has two LED circuits. One has 22 LEDs in 4 strips and the other has 33 in 6 strips. Half of the strips have 5 LEDs, and the others have 6 LEDs. If any strip is unplugged, ALL 55 LEDs go out. The ones in the intact strips blink very briefly every few seconds. My problem is an intermittent failure, so I can't tell which one of the 55 is bad. I'm going to replace them all.

[@cozziec1196]

Why does one bad LED strip cause the whole screen to go black? Are they series circuit and one bad strip knocks them all out? Or is there something else?

[@slider6902]

Tampatec - You. Are. Amazing. (and totally inspiring). I have a Samsung UN50ES6100 50" LED. Audio & power works fine. But video is extremely dark, like 5% visible in a dark place. Is this definiately a backlight strip issue? Where do I get the LED Strips for my TV if ShopJimmy doesn't seem to provide? Thank you again for all your help!

[@reeltwig2929]

Josh Goodwin you figure it out? Having the same exact problem 5% visible but audio and power work fine.

[@Dediservice29]

thanks for the tutorial, it's very useful greetings from Indonesia

[@Vidya1939]

Yes correctly said " it's scary, and delicate requires patience " I vl back down my TV BRIGHTNESS to prolong back light life.tks for nice videos

[@TampaTec]

Back down the backlight setting to 25% not just brightness. Also Firmware update is recommended.

[@dj_jake]

I appreciate this video... it helped .. keep doing what you doing... It's very informative

[@akpolomark9090]

Good repair,how fast will it be when ordering for parts?

[@TampaTec]

akpolo mark 5 to 7 days

[@TampaTec]

Stan Marsh I do LCD screen replacement on laptops usaully but not TVS because the cost is too high and risk of damage.

[@onehardone3330]

Tampatec g

[@gadimuzik5431]

What kind if tape did u use to secure then screen?thanks good video by the way

[@luigipellegrini92]

It looks easy when you have the correct tools and tester plus a technical hand and brain. I love your work. I'd love to get the LED tester and the Phillip drill screw driver. How much does a complete set of LED strips on the back ligjt costs?

[@Smokinlucretia]

Awesome How To Video TampaTec! Keep 'em coming :D

[@TampaTec]

thanks Ayleid

[@mohamedsiadabdille7631]

TampaTec thanks

[@gillean2]

Excellent video! This will be my guide. The painters tape part makes me a little nervous. I may just try to tape the hard parts of the panel instead of those ribbons that can fail. I like the way you set up the disassembly and reassembly. Thanks for the video!

[@SilverMoonJoe]

Hello Tampatec! It is an easy fix but a tedious one... done it before but customer dont want to pay for the painstaking job. Great video as usual... Joe -K4JGA - JGA ELECTRONIC REPAIR CENTER, CASSELBERRY, FLORIDA

[@TampaTec]

Josef Ayala easy for a pro, yes definitely need patience doing this repair. I think you're an hour and a half from Tampa I should visit you in your shop if that's ok? maybe we can collab if you got a repair channel?

[@SilverMoonJoe]

Tampatec hello... sorry for late replied... although i dont have a store front, just my garage converted into my workshop you are welcome to come. Due to some health issue an early retirement was forced on me...😕 ... in any event it is I that would like to learn from you!!! Your videos are one of the best ever made here... just finished an estimate on an Emerson/Funai... 39 inches LCD bad Inverter, somewhat problematic to get... customet declined to pay for it...oh well...she gave it to me!!! Planning to fix it... keep it coming young man!!! from Casselberry, Fl. Joe K4JGA JGA ELECTRONICS REPAIR CENTER

[@georgethorsen9240]

Your diagnosis and step-by-step instructions were simple, understandable extremely well done. Not sure how easy it will be for me to buy parts for my LG 32" LED TV here in Bohol Province of the Philippines. The labor here is inexpensive but the parts cost may be prohibitive. May just be better to replace my 4 year old TV. Thanks for a job well done. At least I have a better understanding of the fix if I choose to repair it.

[@jimcameron1451]

Good video, thanks.

[@onehardone3330]

Jim Cameron

[@onehardone3330]

by

[@kennethpappas]

if i use that tester and insert it right into the connector from the main board going to the leds shouldnt they light up? why take the tv apart to see if your leds are working? yes i get it, you now want to see which leds are bad but to troubleshoot if you have any leds working or that you have a different problem, wouldnt this work? Thanks and awesome video.

[@georgelast9991]

A lot of you think this repair wasn`t worth the trouble and i agree but only because of the size of the tv. if this tv was 60 inch or larger it would be worth it because people are willing to pay $250 to $300.00 to have it repaired depending on the model and year of course.

[@cjo1392]

Top video. Buying a new larger LED TV but will fix my LG 32" later as a project

[@azemuth100]

I think everyone who is interested should be watching these videos

[@peterp1143]

if some led strips light up when testing shouldnt the screen still light up across the working led strips?

[@Zack-dk3pt]

lol i didnt learn from your mistakes i copied them exactly

[@wedaralalagethusharakaruna1752]

Welldone....im a sri lankan.very usefull to me.thanks alot...

[@dondesnoo1771]

I fixed TV's for living. for 50yrs if my LCD breaks I'm going to spend 200$ for new put old one in dumpster.

[@angelosanagnostou5550]

And by doing that you make the owners and shareholders of Samsung Sony etc very happy. You have fallen into their ploy.

[@waelfathe9909]

this guy is very strange he is fixing and yet he is dumbing?

[@fryingpanhead8809]

He probably fixed the old CRT/tube-type televisions. Back then,you didn't pitch those out, as a television was a significant portion of the household budget. All drug stores had tube testers in them.

[@nilpo19]

Our environment thanks you. You should put it in your own backyard instead of someone else's.

[@joshmccabe1674]

Angelos Anagnostou who do think makes the parts for the tv?? So they’re going to make money off you anyway you look at it

[@aniessaboulsoof]

I will not change the LED strips of my tv, but I know now what is the problem of my TV,,, big thanks bro from IRAQ....

[@TaylorDjetx]

Sigh.. Just going to buy another tv lol

[@Soknik01]

Really? The entire repair requires nothing more than a screw driver, the cheapest soldering iron on earth. If you keep the boards on the back of the tv you can even power it on and see what lights are bad without having to buy a led light strip tester.

[@alvaromlssilva]

Great video and clear explained that brings me to one doubt. Is it possible that one led off in just one led strip may be responsible for no blacklight? Thanks.

[@lucruz9990]

You Can Buy same led tester at ebay for 31.79 with free shipping

[@Vellieveil_64]

Love the vid🔥🔥🔥 question tho. When u tested the led, u said u tested it under a load. Exactly what do that mean and how can I do it without the meter thing u used? Will a multimeter work?

[@evkeeney2851]

Throw it out and buy a new one.

[@theingrams9668]

it's really great to watch you every step of the way I have a Black point curve smart tv and everything you said I could see it through on my tv like it's the same one as yours, it's really helpful appreciate it even though I don't have any tester or led strips it was really helpful appreciate it thanks

[@kimbas3013]

I have a Samsung tv, but after watching this I think I can fix my tv..thanks TampaTec for a great,informed video....

[@servicioTURIN]

gracias aprendo mucho de tus vídeos me gusta verlos todos. yo repare un tv con un vídeo que tienes gracias amigo saludos desde El Salvador

[@kevinhancock4064]

Hi great video I'm about to test firstly the inverters on my uncle's tv of they check 0ut ok then can only be the screen I've replaced all bad capacitors which worked great on our tv how much was the back light mate ? Also what is powering the led's when u test them to light up ? Is the power from tester lighting them? Thanks 4 any reply