How to Fix "No Drives Detected" During Windows Installation (Windows 10/11 Tutorial)

[@daniellesisserman1014]

I followed this guide exactly but when I got back to the Windows Setup page and selected my USB in the browser, it did not recognize anything. To solve this, what I did was add the entire RTS folder to a new clean USB. then connect both USBs to the new laptop. Then in the Windows Setup page browser I selected the VMD folder and that worked for me.

[@memstechtips]

Thanks for sharing this to help other viewers out, really appreciate it!

[@pox1151]

I had the same problem and this fix worked for me. Thank you!

[@memstechtips]

Glad the video helped you out!@@pox1151

[@adriancojocariu2062]

You are a legend broo!!!!! Thanks so fking much

[@Boldsnow64]

Thank you I was about to pull my hair out and curl up into a fetal position

[@xxxxxfirefoxxxxx]

damn, it worked. PLEASE NOTE: Put the entire RTS folder in the USB, and when searching the drivers, go inside the folders (when installing) until you reach VMD folder and simply select it. It will then show you waht the video show at min 04:16 . Select VMD Controller and then Next. It will load many times (the green bar on bottom) and then you'll see partitions.

[@memstechtips]

Thanks for sharing!

[@Jectjrspas]

Always a random comment saving the day, thank you !

[@MonoMonoPie]

Thanks for the comment, didn't work without it!

[@faithnotworks1611]

I also had to use this method, thanks!

[@itsmilkmatt]

U saved me!!! Ty

[@undreamedjr]

MAAAAATE, IVE BEEN SEARHING FOR DAAYS FOR THIS FIX, NO SINGLE VIDEO HAS BEEN AS HELPFUL AS YOURS. THANK YOU SO MUCH FOR ALL THE EFFORT YOU PUT IT!

[@memstechtips]

Yoooo man, I'm so glad I could help solve your problem! Always a pleasure and thanks for your comment! 😃

[@ryanohunwu5729]

Thank you so much homie! Struggled for several days and couldn't find any solutions. I had to put the whole VMD folder on the USB and that worked!

[@memstechtips]

Great! I'm glad I could help you out 😎

[@martindragland8585]

This video and this comment saved me! F*** yes!

[@memstechtips]

Awesome! I'm glad the guide helped you out! 😀@@martindragland8585

[@воланді]

This.

[@mrstarlord]

THIS ! do this guys. Copy the whole folder with every file that was extracted. Thanks a million ❤

[@chrisantis]

All I can say is THANK YOU!! After looking a many videos and reading a bunch of posts, this is the only one that really worked for me. I had this problem with a Dell computer, and I followed exactly the instructions in this video and at first it didn't work. But just as he says in the video, if it doesn't work then go to the manufacturer and download the correct driver. With Dell the installation of the driver was a little tricky. When I went to extract the actual driver in Power Shell, it didn't work, but Power Shell itself gives you tips to follow, which I did and then it worked just fine. But without the instructions in this video, I wouldn't have gotten it done. Thank you!

[@rcfrogman]

It would help to note to copy and paste the whole VMD folder from RST into the flash drive instead of just the IAstorvd.sys. But thanks man your a real life saver. There were other videos like this about getting the SATA software driver update from Intel but they were old and outdated in how you had to extract and download them.

[@memstechtips]

Yeah if I knew about it during the making of the video I would've copied the whole folder, but my awesome community has left a lot of comments saying to copy the whole folder, hopefully people come down here to read the comments!

[@DG-mi2mc]

Legend

[@oleksandr_briukhovetskyi]

Didn't worked until I copied full RST folder with all files, and my system wanted to INF file, not SYS. Maybe that information will be useful for someone. Anyway, thanks for your guide!

[@memstechtips]

Pleasure, thanks for sharing how you managed to fix your issue!

[@mitil2044]

thank you , it did save my life also :D

[@memstechtips]

Awesome, glad to hear that!@@mitil2044

[@TurtTurt]

I did not copy the whole RST File but I did copy the VMD file over and then it found the driver also titled with the inf. Thanks for doing that!

[@AdityaKumar-hz9um]

you a life saver bro

[@cassiusishot]

Did not work for my case, but found out that a BIOS setting was on allowing RAID. Flipped that to AHCI/NVMe, and without the drivers was able to see the drives. This is for a Dell laptop, and I have seen this problem on many Dell computers that may have RAID enabled by default. Hope this saves someone hours of struggling :)

[@memstechtips]

I'm sure this comment will help someone! Yeah I've noticed that on DELL laptops and also on the new Lenovo's, VMD is enabled by default, also causing the drives not to be seen by the drivers. I just disable it.

[@Dills1212]

Your comment helped me!

[@oussamasafadi3488]

The creator of the video is a hero but you sir is the hero I personally needed thank you so much for the help

[@TheCcclement]

It helped me too. Thank you.

[@zro.]

I genuinely cannot express my love to you, thank you kind sir

[@JP-nm8pj]

THANK YOU!! 6 hours into troubleshooting and your video worked perfectly! I followed the others and copied the RTS folder. Just wished I found it sooner. Thanks again!

[@itsLemonzest]

What about AMD CPUs?

[@isponik7397]

Did you find the solution 😭?

[@My_Philosophy_Mind]

Dyum right niw its my problem also

[@Dee_Law]

Great work man, It didn't work for me exactly as is. I used a seperate USB, copied the entire RST folder into it. Inserted the Boot USB and the RST folder USB at the same time before going into the windows setup menu. I got into the RST folder, then I selected the folder that has the driver, went into the folder with the driver that you showed in the video and it worked! Thanks!

[@johndoe7766]

you are amazing ! can't believe have to go through all that though just to install a driver while trying to install windows in this day and age..

[@memstechtips]

Yeah it's crazy hey!

[@twilightrealm4267]

Thanks so much it was just what I needed. When I tried to use the first version with the Microsoft download, I put it in a folder named Drivers and copied it to the Windows 11 usb boot drive and it couldn't find the drivers though I could see the Drivers folder. Then I took the drivers out of the folder and put them right in the main Windows 11 directory. Still didn't work but I could see the driver files. So then I went to Asus, my motherboard, to download what I thought would be the necessary drivers and copied them into the main Win 11 directory and finally I got the files you had on the screen. Yay! Thanks for knowing we might need a plan B.

[@memstechtips]

Thanks for your detailed explanation! Glad you got it sorted out.

[@nadeemafzal8984]

Ur a life saver It didn’t work by just copying the single file I just copied all the files from VMD folder and it worked As always no rhyme reason or logic with Windows Many many thanks - God Bless

[@ASHABA_RENE]

You guy, deserve top medal. it worked for me. Your steps are so easy steps. GIVE US MORE CONTENT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I ORDER YOU

[@fabiotrevisano]

Thanks buddy! Your tutorials have helped me a lot. I also watched your tutorial on how to create a Windows 11 installation USB using Rufus, then I had this error here haha. One thing I can confirm at least for me is that it DOES work on Acer PC's, so anyone seeing this should not be automatically discouraged based on what another commenter here stated. I know for a FACT that my Acer has a proprietary motherboard, and I had no issues. I did read the comments beforehand and copied the entire VMD folder onto the USB haha, so there's that. So we can delete the TEMP and RST folders after we're done, right? This is just a one time thing, correct?

[@memstechtips]

Thanks so much for your comment! I'm so glad you got it working on your Acer pc. Yeah, when you're done you can delete those folders.

[@fabiotrevisano]

@@memstechtips Thanks brother! I appreciate it! And you're welcome 😃. I subbed! Well I subbed yesterday when I wrote the comment, but you get my drift haha

[@metalmansyr]

Thank you! I thought the controller was dead! never thought its missing a driver. just a thought, my CPU is 11th Gen but refused the 11th to 13th driver, had to go with the older 10th to 11th driver for it to work.

[@memstechtips]

Yeah I've seen that happen before... Not sure why though. Just happy that it's working!

[@jacobtinkle9686]

Omg you helped me so much, i dont know if it will actually work, but at least it finally showed my drives. For anyone else, i copied the whole rst folder onto the usb and then went through the folders in the installation and then chose the first driver.

[@tsabaryg]

F.Y.I: The tutorial did not resolve my case and finally I guessed I need to change my bios storage (of a Ubuntu DEll Vostro 3420 laptop) from RAID On to AHCI/NVME. I'm far from understanding why/what I did but it worked out. Thanks a lot for your tutorial

[@memstechtips]

Thanks for sharing!

[@Lugge1999]

thank you for your help. we had to move the whole RTS folder to the windows install stick, then we were able to select the VMD folder and we could select the driver. We had another problem, that the storage had an MBR partition table. We had to do the following: while the window is open where the installer asks "select the disk on which to install windows": (1) press shift + F10 to open the powershell (2) type in "diskpart" and hit enter button (3) type in "list disk" and hit enter button. > the output should hopefully give you a list of disks with different numbers. our 1TB disk had the number one (4) type in "select disk 1" and hit enter button > make sure to select the correct number from the list disk command (5) type in "clean" and hit enter button (6) type in "convert gpt" and hit enter (7) you can close now the diskpart application and the powershell by typing in "exit" and hit enter twice. After that we were able to continue with the windows installation process. Thank you for the video and for the comments that pointed out that you should copy the whole RTS folder to the usb stick. I hope the next poor soul is able to find this comment.

[@mickievvicz-adam]

BRO I WAS NEAR CRYING THAT DISKPART DIDNT DETECT MY DISK.... u literally saved me. thank u 🙏🏻🙏🏻 wishing u all the best, cause u deserve it so much

[@Lugge1999]

@@mickievvicz-adam I feel your pain thats why I wrote down what I did to solve it. Glad my findings were of help to somebody else!

[@Furry_Cultist]

Who is this "We"?

[@Lugge1999]

@@Furry_Cultist Me and the buddy that I bought the Laptop for who was sitting 150km away and who I had to guide through all of this via Discord LiveStreaming with Screen Share of his smartphone. I don't wanna do that EVER again.

[@ganeshaage5333]

Hey thank you so much, I tried a lot of things to get this fixed. Nothing worked. Tried through the IRST driver and it worked. Happy to share the feedback as it worked for me.

[@memstechtips]

Glad I could help and that you found the video useful!

[@JuanRamirez-sx8jk]

Thank you! Great explanation and it worked flawlessly for me.

[@lukassipic4952]

Thanks for the video - however, I needed to copy the whole RST map onto my USB and then I succeeded. Still a very helpful video, thanks!

[@memstechtips]

You're welcome!

[@amirmohammadmirlohi1059]

It was the best educational method that I have seen for this problem. Thank you for taking the time to make this tutorial

[@memstechtips]

You're very welcome!

[@ray-qt2ji]

A year later and this perfectly solved my problem. Thank you so much!

[@emmokoralek]

I dont usually leave comments :D but man :D u saved my life and life of my brand new MSI laptop :D great work

[@martindragland8585]

Subscribed and liked man, this was spot on what I needed. I love the internet and YOU!

[@memstechtips]

Awesome! I'm glad the guide helped you out! 😀 Much Love ♥

[@iezekiel_]

SO IN ORDER TO FIX MY WINDOWS INSTALLATION! I NEED TO ALREADY HAVE WINDOWS INSTALLED GOT IT THANKS 👍

[@paulfrayne6519]

Unfortunately this will not work for proprietary hardware like office computers like Dell or Acer. For these you will need the custom os install disk or iso as trying to do it this way doesn't work due to the proprietary system design, I learnt this the hard way with HP, DELL and Acer office computers as I tried this with all 3 and it never worked. As a result I advise everyone to steer clear of proprietary desktop builds and for laptops to create a recovery disk or usb drive device when you first use it after purchase and keep that labelled device in a safe place.

[@memstechtips]

Yeah, you're right about that, but I assume that is only for desktops, or is it the same for laptops?

[@paulfrayne6519]

@@memstechtips same for laptops, actually even more so unfortunately!

[@memstechtips]

Thanks for the feedback! I appreciate it. 😀@@paulfrayne6519

[@gaming__god]

It worked for my acer laptop

[@memstechtips]

Thanks for letting us know. 😀kzbin.infogaming/emoji/7ff574f2/emoji_u1f600.png

[@cbkia]

worked! you have to disable the VMD in BIOS if possible in order for it to work.

[@galingeorgiev1694]

Yes, I did it the same for ASUS laptop vivobook 15 ..... Just disable VMD in BIOS and the HHD became visible for WIndows installation. Now I see this comment and can confirm that this work in some cases.

[@williammacdonald2283]

You're a lifesaver man. Good work

[@memstechtips]

Glad to hear it! Thanks.

[@ratneshsachan4981]

Hello, I am Geeting the same issue hard drive is not visible, i follow all the steps copy the software in a pen drive and insert in the server where want to install, Brouse it, and select the pen drive folder but software is not visible in the desired window. please help

[@memstechtips]

Sorry my friend, but other than this video I can't provide any other support.

[@Necla1652]

Hi friend, the video is indeed useful but copying sys file alone won't work at all, you also need to copy 'inf' file along with sys files to let 'load driver' screen recognize the storage controller and the drive. Thanks anyway!

[@memstechtips]

Thanks! Yeah, a lot of people have commented that exact same thing! Thanks though!

[@ASHABA_RENE]

GREAT TUTORIAL BRO. Am from Uganda

[@EddieTheGoat1561]

If the first solution didnt work try the second will when you look up your drivers for the motherboard make sure you look for vmd drivers then you put thst whole folder into the usb and it will show up and work

[@memstechtips]

Thanks for this 👍🏻

[@Cyba_IT]

TLDR: Wasn't driver problem for me, ASUS Tuf Gaming laptop had RAID enabled in the BIOS so I turned it off and the drives came straight up. Disable the Intel Volume Management Device (VMD) technology which is in the advanced settings of the BIOS on Asus laptops and the drives should appear.

[@memstechtips]

You're absolutely right, this doesn't just affect ASUS laptops, it's basically any new laptop that has VMD enabled in the BIOS. Thanks for your comment!

[@mainoraguilar698]

thanks!

[@isahilliogluu]

Thank you! It worked only after I copied the whole RTS folder.

[@dresway187]

I’ve tried everything as in your written guide. When I execute the extraction code my intel Rapid Storage stops working and nothing happens. Please advise.

[@memstechtips]

Sorry, but I can't help any more than I already do in the video...

[@yeaa321]

First solution worked for me on hp pavilion 11th generation thank you mate

[@memstechtips]

Great! So glad to hear that.

[@Elisham7]

i tried and its works 100% thanks very much

[@memstechtips]

You're welcome!

[@ZameelAhmed-t9q]

Amazing, You just saved me hours of headache sir. Thank you!

[@alexredwood_]

I followed these instructions, i even put all the drivers from VMD into the usb and couldnt get windows to acknowledge that i have any drivers in the usb. Can you recommend any next steps?

[@memstechtips]

What computer are you using? If it's a fairly new one, go into your bios settings and disable any settings you see labeled "VMD" - It should work then without even having to install additional drivers.

[@snowtear5785]

Adding the whole RST folder to the usb worked for me.

[@memstechtips]

Thanks for the feedback.

[@siyolisemkontwana2437]

A life saver❤ thank you so so much bro, much love from South Africa

[@memstechtips]

Thank you! Appreciate it!

[@TheDukeOfKnin]

The problem is,when i run as a administrator in Windows PowerShell and type in cd c:/temp i get a respons such as "Cd: cannot find path because it doesnt exists" even tho i made the file and copied the SetupRST...how can fix it?

[@memstechtips]

Okay, can you try and just name the folder anything else, ex. create a new folder on the c: drive and name it tempdrivers then just change to path in the command to cd c:/tempdrivers and try again?

[@gregoryprins6571]

Hi Meneer, worked first time for me! Thank you very much!

[@memstechtips]

Hi Meneer, great to hear! Thanks for the comment.

[@fahadhussain9824]

Brother I have intel i5-6th generation hp Laptop and what you recommend doesn't work for me Plz help me Because without drivers It's bot skipping to next It's required for the windows to install because i am installing windows 11 ltsc version. Its actually saying "Install driver for Displaying hardware so that your device will be discoverable" Plz tell me what's the solution Thankyu

[@adjiepaleracio728]

Thanks, man! It helped me with an issue on a laptop that I'm working on.

[@memstechtips]

Great to hear!

[@rarandre456]

Thanks! It works for me but it needs to copy all folder rts and windows recognise what he need

[@memstechtips]

Glad you could get it working! Thanks for your comment.

[@MrAndrew0511]

Yo thanks for this I just bought a new PC for my work and needed to do a fresh installation to fix numerous errors it was giving. Without this I would have just returned the PC and told the user you're SOL.

[@gedeputrawan8093]

Thank you , your information solve the problem , i have searched , finally i found solution on your Video 😀👍👍👍

[@memstechtips]

Welcome 👍 So glad I could help!

[@HagerHassan-ub4fc]

Hi I wanted To thank you so much For helping you made my Day :)

[@memstechtips]

No problem 😊 Always a pleasure!

[@samantha-jane228]

Thank you...ur explanation and info provided is Brilliant! easy to follow, my hard drive issue is sorted!

[@memstechtips]

You're welcome! Thanks so much for your comment, it helps a lot to know that I'm explaining things properly and thoroughly. Appreciate it! 😃

[@leif-S_1]

@@memstechtipscan you please help me. I accidentally deleted my drive with windows and is now facing this problem, do you think this method will work for me?

[@rod779]

Absolutely one of the best instruction videos, perfect from beginning to the end, step-by-step instructions. thanks man,

[@memstechtips]

You're welcome & I'm so glad you liked it. Thanks for your kind comment, I really appreciate it!

[@shenbud3]

worked great my friend great video!!!

[@memstechtips]

Glad it helped

[@Anthony-ke3lj]

When I click on the usb in the windows setup it gives me the screen no signed device drivers were found and nothing else pops up

[@memstechtips]

What is your computer make & model number?

[@MajinKakarot1386]

this is what a wizard looks like people. thank you sir your magics have saved my time and youth

[@skippingbear92]

I only ran into this issue when I downloaded the ISO file and used another iso to usb software, instead of allowing media creation tool to burn the iso.

[@mithrandir2171]

It worked like magic! Thanks brotha! ❤️

[@awaisakram3880]

Thank you for showing in easy Way - Worked

[@zeveniclick2950]

This video was extremely helpful !

[@memstechtips]

Glad it helped!

[@Major_Tom2080]

Lots of heart to you mate... Just saved my day... Cheerz

[@chrism1051]

Finally a tutorial that worked. Many thx

[@tomsimpson3062]

Thank you very much. You solved a very frustrating problem.😀

[@memstechtips]

Great to hear & you're welcome!

[@jfsr2585]

What drivers would work for a xeon 2135?

[@simply._.raheem4625]

Mine load for a while and says “something went wrong we will restart for you”. Any help?😢

[@memstechtips]

I'm not sure why, sorry...

[@andriymarshalek6150]

Thank you for the helpful solution!

[@memstechtips]

My pleasure!

[@bulletdrive]

Adding the whole RST folder to the usb worked for me.

[@omarkhader9019]

Thanks man! downloaded the RST on the USB with windows on it and loaded it from there!

[@Ken-vq4ov]

For laptops you can just try turning off vmd control in bios it worked for me

[@Loopybad]

my pc says an operating system was not found once i inserted my drive. any help ?

[@memstechtips]

Did you install Windows to that drive yet? If yes, try and look at your BIOS settings and change settings related to Legacy or UEFI boot and SATA controllers.

[@ThePhillipmccurdy]

what about AMD boards?

[@bigal24698]

Didn’t work 😢 I tried 10th gen version. Win 10 pro installer wasn’t finding compatible driver in the whole RST folder copied over. I could see some listed when I unticked “show only compatible drivers” and tried one but it didn’t work. My PC is Lenovo C30 Workstation Type 1136 with Xeon E5-1650 v2. Any ideas?

[@memstechtips]

That's unfortunate sorry, you should go to the Lenovo C30 support page and check if they have any storage drivers there, put those on a USB flash drive and see if you can use that during installation. Hope it helps!

[@pavlovskyyp8799]

for me it detects the drivers on the usb, but they are all incompatible with my intel 11th gen processor :/, and when i upload all the drivers to my laptop the disk still doesnt show

[@Alex-mc5yn]

Same, but on amd.

[@memstechtips]

Check your bios to see if you have a VMD setting and turn it off, then try again.

[@pavlovskyyp8799]

@@Alex-mc5yn for me it worked when i downloaded windows as iso file, then via rufus software imported it on usb stick. As shown in this video kzbin.info/www/bejne/jXK7p4mkrJWWnNk

[@WorgenWorld]

I'm going to try this soon since my laptop doesn't want to detect my old SSD that I put in. I hope it works! EDIT: Worked like a charm! Thank you for that PowerShell explanation, I would have never understood where and how to extract the drivers since I can't access my laptop.

[@memstechtips]

Great! Have you tried it yet? Excited to hear if it worked or not?

[@WorgenWorld]

@@memstechtips Yes, it did! Thank you so much!

[@memstechtips]

Awesome! So glad to hear that.@@WorgenWorld

[@SEAMOSS69]

FACTS - Thank you Mate

[@TeengBadimalbo]

You're a lifesaver, bru! Thanks a bunch!

[@breytenbach.b]

Thanks buddy. Great Guide!

[@lynnenairesiae1555]

this setup command is not working for me on powershell admin what do i do

[@Furry_Cultist]

Rename the RTC installer. Add ".exe" in the end

[@abdelhakhenouz5487]

Thank you sooooo😄😄😄😄 much worked for me

[@memstechtips]

You're welcome! Glad I could help.

[@elementohm]

Omg, you're a true legend for this tutorial video. God bless you, sir!

[@Hurrspurrs05]

My laptop didn't recognize the second command, I copied and pasted the command from the link so I'm not sure what to do now

[@andrewwilliamstaines6252]

I am using mac to create the bootable USB. How do I do the things you did on powershell??

[@yosryhhabdellah3259]

My usb not showing in load driver only showing partition of hard disk only

[@memstechtips]

Try different USB ports and format it to another file system.

[@yosryhhabdellah3259]

thanks my laptop has no cd room only flash port and when i changed no thing change @@memstechtips

[@notblqcked7864]

Hey do you have a guide for non intel users? I’m struggling with installing windows on my ssd nvme and I can’t find no drivers anywhere

[@memstechtips]

I don't have a guide for AMD no... What motherboard do you have?

[@notblqcked7864]

@@memstechtips b550m aorus elite

[@darkplague6670]

​@@memstechtipshello please help me too i have a problem with this too im today bought m.2 ssd samsung 990 pro and i see it in bios but if im downloading windows 11 i didnt see that m.2 ssd in there and i using motherboard b550 amd so i dont know what to do im doing this 4 hours ahh... i so much appreciating your help man!!!

[@astro_saturn]

I had the issue where it didnt detect the drivers, followed the top comment and it detects the drivers and now windows has another error saying i need to contact my vendor for updated drivers

[@memstechtips]

Hmm okay are you sure you have the latest drivers for your hardware?

[@astro_saturn]

@memstechtips Yeah so I managed to fix it on my own, I re-download the files from Intels website then I put the file on the SAME usb I was installing windows with. Windows finally accepted the drivers when I did this and it installed with no issues

[@rexy198]

It doesnt show up on the "where do you want to install windows"screen

[@memstechtips]

So you don't see your drive listed at all?

[@morgovii]

Thank you so much! I was ready to go to the shop and ask them 50$ initial setup 😅

[@memstechtips]

Glad I could help!

[@MonoMonoPie]

Thanks for the video, it really helped!

[@memstechtips]

Glad to hear it!

[@PIUNCP]

my asus pc is intel 11th generation,but it says no signed device drivers found,when install windows after the following method

[@PIUNCP]

how to solve issue ?

[@memstechtips]

Go into the bios settings of your laptop, look for any settings related to VMD and disable it and try again.

[@PIUNCP]

tnx@@memstechtips

[@bluesriderDF]

It worked perfectly on my Optiplex 7010. Thank you!

[@simplepixel5617]

in my case it wont extract the files. It opens up during the instalation a new partition that is empty and by the time it is done it closes it. no trace of any file installed

[@bencebalyi7335]

Thank You! It works for me!

[@memstechtips]

Great! Pleasure!

[@Cmdr_Amethyst]

Thank you so much, that was incredibly helpful ! =]

[@memstechtips]

You're very welcome!

i have linux and no windows machines, can you make a version for manjaro linux?

[@memstechtips]

Maybe in the future yeah but not anytime soon, sorry

[@AdedayoDaniel]

Mine is showing 0.0mb unallocated space and I have tried all method using cmd, diskpart, list disk, select disk, clean and still not working. Still showing 0.0mb unallocated space. Please who can help me 😢

[@memstechtips]

Your drive might be physically faulty, I would try another drive or try our drive in another pc to do fault finding and determine where the issue might be.

[@AdedayoDaniel]

@@memstechtips Thank you 🙇

[@Koza_pl]

It didnt created RST folder for me even when i created rst folder and put the commands it didnt work :/

[@memstechtips]

The process definitely does work, just try and follow it again step-by-step.

[@musiclover-r9m]

yep same - it does not create the RST folder or extract anything

[@davidbradbury-bird8962]

Your a Dude ❤, the motherboard drivers did it for me rcraid folder thank you so much .

[@Russ0o618]

I saved folder, but still saying “no signed devices were found”

[@memstechtips]

You can read through the comments on this video, there's a lot of extra help to be found here. Hope it helps!

[@steamcontrolled3665]

Or just turn off rapid Intel storage setting on ur bios save and restart. Then boot from USB again, fixes it 90% of the time.

[@memstechtips]

Yes this also works! As well as turning off Intel VMD if you have that setting.

[@mattfournier4527]

Im struggling with this and all other solutions. Ive tried going to the mobo manufacturer site as well. I will get to where the installer will recognize the drivers are compatible but will not install the drivers. Ive tried RST and Sata drivers. No luck. Tried different ports and USB sticks. Could this be a sign of a larger issue? I am trying to replace a hard drive that crashed, maybe its the motherboard that is malfunctioning. I am not sure, I cant get anything to work.