no every step in detail is good..i wouldn't know how to even take it apart if you didn't take the time to show everything in detail..mine was a blown fuse i wouldve thrown the system out if not for this vid, Thank you for this!
@David-sw3on3 жыл бұрын
Man 🤔 I hope that the beautiful boombox that I picked up for only $8 is just a fuse problem like yours! Thanks for the vid 👍😉🇨🇦
@karlcotton38473 жыл бұрын
I've got a Panasonic SA-AK27 in my study room it had poor sound quality when I bought it but now it's fine my speakers were wired wrong
@noelsteelpanmusic12944 жыл бұрын
Hi-I have a PANASONIC SA-AK78 that keeps going in & out sound wise. I love the sound of it . It this an easy fix?
@atiqlinkon99745 жыл бұрын
The guitar track in the end was so cool, so awesome. Please tell me the song name ??
@DebParedes5 жыл бұрын
the song is an original by my husband and his band.. it plays in its entirety on our featured video on our YT channel and it's titled "The last straw"
@djredjas7 жыл бұрын
Hi dear, I have a problem with my sa ak200, I think the IR does not work since this control if it works with another sa ak200, you have an idea of what I can do
@kikiw60117 жыл бұрын
Hello!My sa-ac330 won’t stop opening and closing the CD door and then say take out disc, any experience with this?? There are no disc in there. Because of this, I also can’t switch to radio, aux or cassette player. Thanks!
@rajkamalweerasingam30225 жыл бұрын
Kiki w hi Kiki.. did u fix ur player. If u fix it pls tel me know how u fixed it. Because my own also making the same problem pls..
@curlymorena344 жыл бұрын
Awesome I'm check mine like that
@wbflee3 жыл бұрын
Please use a power driver for the screws as there are too many screws.,thanks for sharing
@eljaisiksikakidwell-thunde95183 жыл бұрын
I have this same CD player but is will not recognize the CDs to play the disc. Why is that happening, is that something that can be fixed?
@sol.f2 жыл бұрын
If you found an answer I would love to know 🙏🙏🙏
@rosskstar6 ай бұрын
@@sol.f clean the laser?
@Elvis-dw7ux2 жыл бұрын
Zabardast cheers from Toronto, .....No luck.. didn't use it for 10 years...Panasonic Remote N2QAGB000002, I just sprayed some Rubbing Alcohol and later sprayed and washed the Circuit board with Rubbing alcohol and Contact Cleaner. ONLY the Power button on the Remote is working. What could be wrong?
@bintangfjn87053 жыл бұрын
Mantapz.
@Mike-xt2lh5 жыл бұрын
Hello what can cause the stereo to run hot ? Could it be a blown fuse or something else ?
@MrRoyosIHAXfr5 жыл бұрын
Hey man the same thing is happening with mine its an SA-VKX20 Audio System, i hadn't turn it on for 3-4 months and now its blinking 2 times blue but will not turn on is there a fix, i even tried switching to my PS4 power cable it fits in but will not turn on same thing just blink and stay OFF ? How to fix please help
@DebParedes5 жыл бұрын
you'll have to check your fuses ..if that isnt it..then it will need a more advanced skill,,,learn how to use a tester and test your wirings and inside transformer, thoroughly look at your motherboards for burnt areas loose wires or capacitors..once you find it, use a solder to remove and replace defective part or parts..good luck
@prasannabandara90574 жыл бұрын
Can you tell me a reason for panasonic SA-VKX25 model? . It is not power on. But output voltage of power board is ok. But it is automatically voltage drop. What is the reason that. Please give me a solution to repair me that setup.
@alvarowilson53555 жыл бұрын
Wht kind of screwdiver you use?
@drshivprasadg5 жыл бұрын
Hey in fuse is blown condition the power indicator light just above the power button glows or not ? Mine system it's glowing but system is not starting
@leroydavis56945 жыл бұрын
I have the same problem did u find out how to fix it
@drshivprasadg5 жыл бұрын
@@leroydavis5694 Hi, I got the fix , just need to change the power cable , if power cable is having some damage or cut it will show less bright power light.
@itzMíhan5 жыл бұрын
Same problem with Sa-Ak120. Already bought new cable and it's still not working. How to fix?
@curlymorena344 жыл бұрын
My gpx model hm3034 stereo stays on standby the power button is lit but doesn't turn on can u fix that the same way
@kevinelliss29175 жыл бұрын
My Panasonic SA-AKX 660 keeps restarting after about 15 sec have tried all buttons no luck
@shouryapratap2844 жыл бұрын
idk abt fixing my sound system but ima master at screwing now😅
@bhalachandraninne77267 жыл бұрын
my system is not working at all Panasonic SA-AK30
@redlightshooter5537 жыл бұрын
mine wasnt too and i had to go inside and replace the transformer
@kuryecelebi4 жыл бұрын
redlightshooter553 not the fuse?
@joelhall6495 жыл бұрын
Where did you get the fuse to purchase?
@DebParedes5 жыл бұрын
Ebay
@tonywiggins80733 жыл бұрын
And you was gonna throw it out? I have practically the same one. They do have a great sound! But mine works fine it’s just when I turn it off it comes right back on after a few seconds. Not completely on but does the knight Right thing with green lights tho. Goes they each Equalizer setting, stays on and says disc with blinking lights. I think something happened with a power surge and it hasn’t worked right since.
@colombowest3 жыл бұрын
If you set the clock(time) it should display that and no more lighting effects. Will reset if power is disconnected.
@jacobbiondo-ballard33115 жыл бұрын
My aux cord doesn't work do u have any ideas to fix it
@fjdkkdkdk61034 жыл бұрын
Same here
@jacobbiondo-ballard33114 жыл бұрын
@@fjdkkdkdk6103 I found out how to use it u need one of those cords that connect to the two collors on the back of it that are connected to a aux
@dcpmootown2 жыл бұрын
any logic as to why my Panasonic-Sa-Ak330 dosnt show the display anymore it works perfect other wise,and my remote wont work also
@dfwguy71498 ай бұрын
my display is blank also! Unit powers on and cd lights flash, but no display
@lehlohonolomokoena8792 Жыл бұрын
Can you do F61 please
@lmofficial32694 жыл бұрын
hi! i have the aiwa stereo NSX S707 and when i plug it to the electric socket is just in standby mode and it can't to power on.
@Kyirux4 жыл бұрын
Same with mine Panasonic SA-AK75
@tomarceo12854 жыл бұрын
Mine to I have my Panasonic sa ak 33 ..I plug in and the power is on but the problem is no digital display how to fix it...asap reply..
@mariasmith44182 жыл бұрын
did you find a solution ? please let me know as soon as possible !!
@LukaM5 жыл бұрын
Why wasn't there a tape counter😒
@strikermaximus3654 жыл бұрын
The 2 amp fuse blew out probably
@jhonplays.54513 жыл бұрын
Saan dapat isaksak ang 9v?
@ReynaldoSaboritValdes10 ай бұрын
tengo uno pero tiene una falla que cuando lo conectas a la red electrica enciende directo y el panel frontal no funciona ,es desir no me deja canbiar de funcion ,alguien me puede alludar con esto muchas gracias de antemano
@marthasandoval78904 жыл бұрын
La bandeja de mi equipo no sale q puedo hacer manualmente para hacerlo
@enzoseven29444 жыл бұрын
Its funny if he only forgot to turn the switch on 😂😭
@mindtraveller1004 жыл бұрын
I have the same system. It has no switch.
@enzoseven29444 жыл бұрын
@@mindtraveller100 what's the fun in that if you can't turn it on?
@valmordoprado42594 жыл бұрын
Meu aparelho estéreo sistem sa ak200 liga aparece f61 e some tudo aonde eu mexo para consertar
@usamajunejo72196 жыл бұрын
plz help me panasonic Amplifiled bwoofer error
@gurungshiva26954 жыл бұрын
how much
@davidherrera68564 жыл бұрын
just a fuse? god!
@dess55003 жыл бұрын
I wish mine was just a fuse.
@MrRoyosIHAXfr5 жыл бұрын
BTW do anybody knows how to connect a LAPTOP to these types Audio System ? IS it possible
@moreplates47825 жыл бұрын
aux cable man
@yogenbhatty79754 жыл бұрын
I have Panasonic SC-AK 177 model..is not getting powered ON..red light near soft power button is getting ON..display not working..shoeing no error..as a technical person I chked fuse inside and found OK..there is no other burn indication at all..entire power supply module is clean..kindly help me out please..Thank you so much Sir.
@kuryecelebi4 жыл бұрын
whats the lifespan of a fuse? mine was bought in 2005 and not working these days. could it be the fuse?
@toto0730813 жыл бұрын
same her with my SA VK550
@heroanything6394 жыл бұрын
I have a Panasonic sa-ak 47 screen error f 61😎😎
@flashgordon16954 жыл бұрын
that code usually refers to a fault in the amplifier section of the stereo and would require a skilled technician to resolve . but if you are capable of doing basic soldering you can always check for broken conneection and resolder them.
@heroanything6394 жыл бұрын
@@flashgordon1695 thanks for the help
@victorlopez11477 жыл бұрын
This video was TOO LONG. Next time you have to remove a bunch of screws try pausing while removing AND replacing them. This video could have been made in 5 minutes.
@MrRoyosIHAXfr5 жыл бұрын
xD why hurrying man i'd say take ur time and do it properly ;) instead of hurrying and then we lose screws when re screwing up the audio system you will be short of screws :D So why hassle take it easy man
@dwilloughby83165 жыл бұрын
No it shows everything much easier to follow, you can skip it, or why watch if you know it all.