HOW TO FIX SCRATCH ON CAR BUMPER Like a Pro

[@AutoRepairGuys]

► Touch Up Paint: amzn.to/3dMNiSC ► Sandpaper Kit: amzn.to/2HqwTSs ► Turtle Wax Scratch Remover: amzn.to/2vzBkbi ► Chemical Guys Wax: amzn.to/2OTpaAA ► Variable Speed Polisher: amzn.to/2vzMFaZ ► Wet Sponge: amzn.to/2uI1qbK ► Microfiber Towel: amzn.to/37oXvhv ► Panel Removal Set: amzn.to/3YiMADu ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ►Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@karlethcabrera1639]

THANK YOU FOR THE PERFECTLY EXPLAINED VIDEO. My dad bought my car like 5-3 years back. But I haven't been able to drive it because I didn't have my license but now that I do I want to get into fixing her up. She has minor scratches but I want her to have a clean and sleek look but those catches don't give her justice.

[@artmichaelsen416]

Great video, I tried this myself but had to put too much paint on the cover black plastic bumper, car is white. Question, should I sand down the high spots before applying clear finish ? Thanks

[@devanc1]

Very helpful video. I am going to try to fix my daughter's bumper which is a lot worse but I am confident this process will work. I love the accent!

[@chrisb1239]

Did it work

[@Abc123______]

Update?

[@avavictoriasongbird]

No one has viseo on 2 step application for opalescence white. Flat white is a breeze even 4 a rookie

[@WayToManyAssassins]

Should really wet sand before applying the clearcat so you're not accidentally sanding most of the new clear coat off.

[@smieszek8080]

He also says that if you have a low spot you should apply more clear coat. No. All low spots should be fixed by applying more layers of base coat. Clear should be painted over already flatened surface.

[@randybrown6709]

100% Correct.@@smieszek8080

[@Sincereh]

@@smieszek8080so you’re saying apply more layers of color paint then clear coat when it’s time to only shine it?

[@Sincereh]

@@smieszek8080not a rude question just trying to zero out how to do this since I have a gash on my white bumper

[@smieszek8080]

​@@Sincereh keep adding layers of base paint and sanding them until it feels smooth and consistent. You may need 3 or 4 layers. Then add clear coat, sand and polish it.

[@shilicaso]

Very good my friend, thank you.

[@MarcShorty23]

My uncle always said don’t shine up too much your car 🚗 cause maybe you’ll get your car stolen lool 😅😂👍

[@ttamcc.4674]

😂

[@sportsguy28227]

Wow, you have a steady hand. Great job

[@justinbernardo8240]

tip: put more paint to create high spots and come in and sand it down. What you see those indents in the touch up is low spots. Its ok if you have a bubble with the new paint u can sand it down.

[@zackmery7089]

Thank works great on my jeep white

[@MarxnManrs]

Good Work

[@DAZ-wo6vx]

Awesome video thank you so much !

[@fiouable]

Great job. With easy to find products

[@tulikinikini4321]

For the clear coat i recommend doing spray clear coat across a bigger area

[@danny.hr3]

awesome video!!! i noticed the paint around the shop and saw the bulgarian flag! are you bulgarian??

[@BillR1951]

Excellent video. Thanks!!!

[@vazz22]

IMPRESSIVE

[@rhroney1]

Well done. Very helpful.

[@abcdefggg5658]

Do you need a base coat? Like a primer? Im looking to do a large area on my bumper about 10 inches long , how about aersol primer and aersol OEM paint after sanding it down?

[@WayToManyAssassins]

Primer will make it last longer, but probably not worth it

[@daisyrodriguez4019]

😅thank you - i think i can do this..looks pretty easy...

[@daisyrodriguez4019]

What the products i need to buy? Can't see where to find the supplies u bought.

[@leiniu5219]

very helpful

[@dini1046]

Will this method work on severe bird etching on my hood just using the clearcoat?

[@thetinkercook5430]

Awesome!!!! Very helpful!!

[@MosoumehN]

Hello, can you tell me where to get this pen, my car was scratched today and I am very worried, I cried a lot because of it

[@irfaanhoosen8702]

Nicee! How about a dent ?

[@infinitevos]

Nice!

[@ravebrave8866]

well done chamkuda...liked it

[@Coa_Kralj_Coa_The_King]

ok, ok, ok,✅👌 Legend!!!

[@masoudmontazery907]

Good luck...

[@baljinderbains6965]

Hi,my car got the same scratch and I want to buy all of the which one you have used

[@eugeneeugene3313]

You had to sand with P400 and polish before the clear coat.

[@sheilamusic1]

Thank you. Very helpful. Sx

[@getthecansin]

Hello I have a short 4 cm scratch in bumper plastic but it’s 2-3 mm deep would I need to use putty? Thanks

[@bobtouchette5308]

I wouldn’t, I’d layer the paint as needed, wet sand lightly, clear coat, cure at least 24 hours then wet sand compound and polish. But don’t take just any advice, research takes time but it is Worth your time!

[@bobtouchette5308]

kzbin.info/www/bejne/kJ3CmoaPjqx1n7ssi=ZKY84qXgAnCm7dAz

[@bobtouchette5308]

kzbin.info/www/bejne/kJ3CmoaPjqx1n7ssi=ZKY84qXgAnCm7dAz

[@nagdiy-vr8ge]

Thanks so much for the video. I have a 2019 white Tesla Model 3 that's not listed above. What would you recommend?

[@jeremyp.2731]

What grit ur using?

[@Resilienze]

I'm pretty sure he said 1000

[@johnp82]

Why not just keep applying the color coat until its level, then clear coat?

[@Brooklyn10genskate]

Becomes lumpy, just tried it. Need to sand it after to level it out and bend it.

[@johnp82]

@@Brooklyn10genskate obviously you have to sand it.

[@2steaksandwiches665]

Hahahaha you classy guy! Perrier for water sanding hahahaha. I’m in the middle of this process right now waiting for it to clear.

[@snoutybear3849]

Do you need to prime the plastic?

[@braygent]

yes

[@Faksnima]

It looks better - but it's clear that area was repainted.

[@lilnotoriousrhino1306]

What kind of bmw is that???

[@georgemurphy9910]

Those to soak your sandpaper

[@andrey934]

Всё - это по русски? 😀

[@anasalayubi5508]

Nama bahannya apaaa...

[@escape2064]

Ugh he is so cute

[@rqrony6755]

What's its name?

[@danielbob4310]

Anyone attempted this?

[@billyspiers5379]

just pour a little vino on it guys and it goes away wala lol

[@stevek758]

You should have used a FLAT Block. you never sand like that

[@Knowbetter69]

Turtle Wax 🐢 that's American made.

[@georgemurphy9910]

Just get a canna clear

[@LastofthedyingBreed95]

Can you give me your email I want to show you a photo do they give me new door or it’s easy to paint over same color or order new part ?

[@drwisis6996]

haaaaaaaa anything on a BMW is terrible.

[@germanengineering204]

Well if you had a big enough bank roll you'd be singing a different tune kiddo!😄

[@drwisis6996]

@@germanengineering204 i meant its such a nice car a tiny scratch is terrible. and u don't know what i have. peace.

[@germanengineering204]

@@drwisis6996 my bad if that's the case!

[@PaulGathings]

Borat? Is that you?

[@piratehacker7025]

Look you guys make some good videos, but this is not one of them. Please people at home do not attempt these steps it will not turn out this way I’m a professional.

[@missj.5052]

Please explain why not. Want to know before I attempt.

[@DigitalLoom]

That looks awful lol

[@RobHTech]

Is this a joke? It looks like crap.

[@max_rove]

no it doesn't. It's quick and good alternative.

[@Denailacole]

You literally can’t even tell. I’m convinced some of you guys wake up made & miserable 😂

[@max_rove]

Good stuff

[@rambeezy]

Thanks for the video