Nice work. I too am a smart repair tech. A decent, honest, down to earth video. Viewers wondering what it's all about? This guy nails it. Keep up the good work👍
@cvrpov2 жыл бұрын
Thanks 👍
@glitchtheory66093 жыл бұрын
highlight of my day when a notification of a new CVR POV video pops up ;)
@cvrpov3 жыл бұрын
Thanks for watching mate im gonna be working on plenty of varied content
@vyseerx Жыл бұрын
Wow, great job. Obviously as DIY at home garage we can’t do like what he did as some of the equipment is missing , and admittedly some expertise too. In any case , it’s a great learning tool , will watch again and again until I knew the theory at least while attempting on my wife’s expensive Audi and save a couple of thousand dollars that was asked to fix it ! Thanks for the tutorial video, appreciate you !
@cvrpov Жыл бұрын
Thanks for the feedback
@AnilKumar-td8jz3 ай бұрын
Excellent workmanship
@jimbrown99672 жыл бұрын
Your Chanel is mint learning a lot keep these gems coming
@cvrpov2 жыл бұрын
I will do thanks for watching
@pablo123b2 жыл бұрын
brilliant bud thx for taking the time to make it cheers paul
@cvrpov2 жыл бұрын
Thanks for watching paul
@willwaddington36653 жыл бұрын
Great video, where can I get the paint gear products from? Can you provide affiliate links or point me in the right direction, I would love to purchase some, I've heard some great things about them and would love to try them for myself.
@mreightytwenty87093 жыл бұрын
Another great video mate...stay safe from NZ
@cvrpov3 жыл бұрын
Thanks. Yes you too look after yourself 👍🏼
@EG3HC6 ай бұрын
Great work. Just a little confused why you back masked around the bumper/headlight edge? What purpose does this have?
@michaelphair7131 Жыл бұрын
How long did it take you to do this repair really good job mate love watching your videos
@cvrpov Жыл бұрын
2 hours
@michaelphair7131 Жыл бұрын
@@cvrpov thankyou for letting me know 💯
@srsalloys19953 жыл бұрын
Mate absolutely class love watching how its done ✔
@cvrpov3 жыл бұрын
thanks pal
@kingcarper65112 ай бұрын
How long do you dry the clear with the lamp before and flat and buff mate nice one
@HektorBandimar Жыл бұрын
Great job, good video, where can I buy some of that APC Grime remover?
@cvrpov Жыл бұрын
Email info@paintgear.co.uk if your in the uk
@tanveernaeem11577 ай бұрын
Nice job, but wonder this much multi-layer taping is necessary.
@Supersleuth098722 күн бұрын
No light wet sanding of the base coat before applying lacquer?
@cvrpov17 күн бұрын
Definately not no
@Snip593 жыл бұрын
Excellent work indeed hell from Phil in Syd great to watch helps a lot.👌
@cvrpov3 жыл бұрын
Cheers
@Anmaghiz8 ай бұрын
What is the total cost for this small repair and how much time did you need to finish this?
@lockstocky2800 Жыл бұрын
I was wondering when is best to use a adhesion promoter on the repairs ? Before filler ? After filler ? And what part of the repair ? Entire area or just the repaired sanded and filled area ?
@cvrpov Жыл бұрын
I dont personally use any adhesion promoter. Usually before you apply the base
@radojas8 ай бұрын
How about similat repair on a white pearl? Any differences in the technique/steps??
@fattoamanowoodwork363829 күн бұрын
Neat work good man
@jarekmalinowski617611 ай бұрын
What about the clear coat blend line? I did my repair in a similar manner and there was transition of the clear coat visible, and it couldn’t be buffed out. Even more, the more I tried polishing the line was more and more visible…
@deanoh6414Ай бұрын
That's what the fade out / blend thinners was applied for. It melts the hard transition line.
@alancraigie79513 жыл бұрын
Brilliant work. 👍🏻👍🏻👍🏻🏴
@WaynesAdventure Жыл бұрын
Looks great 👍
@supercarkid77273 жыл бұрын
How long were the drying times for primer, 1st and 2nd base coats (and did you allow the base coats to dry naturally?). How about after the coats of lacquer too? It’s a shame you didn’t show the wet sanding and polishing stages too. Great video 👍
@cvrpov3 жыл бұрын
Hi mate. I wanted to keep this video quite short. I will be focusing on all these things in other vids. This 1k primer dries under heat gun in around a minute. 1st layer of base dries in a few seconds when blowing with air but leave 3-5 mins between the other coats. This lacquer dries in 10mins under infra red and there's a couple of mins between coats
@supercarkid77273 жыл бұрын
CVR POV 👌👍
@cvrpov3 жыл бұрын
👍🏼
@gulfrazkhan33722 жыл бұрын
Hi, brilliant videos mate. Keep the good work up. Is it water based or solvent paint you are using and can you recommend a good infra red heat light. I use solvents at moment. As I thought waterbase take longer to dry. Thanks
@cvrpov2 жыл бұрын
Solvent based paint. Infra red curing lamp maybe Google that
@Mikesg80 Жыл бұрын
What are the chances of this pealing over time vs a full bumper respray? Also is it safe to ceramic coat over a repair like this and can that help the longevity of a repair?
@cvrpov Жыл бұрын
These repairs last just as long as any! Ceramic after 4 weeks like any other paint job
@JKargariyan-xl2lj Жыл бұрын
Thanks
@cvrpov Жыл бұрын
Thanks for watching!
@peteharrison24043 жыл бұрын
Nice love watching your videos what size gun tip do u use
@cvrpov3 жыл бұрын
I usually use either and lph 80 1.2 or a devilbiss sri pro 1.2 for base and a 1.3 gti pro lite for clear
@yusufnasiru17092 жыл бұрын
Nice job as always bro but this video kind of a different from other ones like did you before hand polish the blending area before adding the fade out thinners or u only keyed the blending area and spray clear or lacquer into it followed by fade out thinners. Your reply will be appreciated. Thanks
@cvrpov2 жыл бұрын
I would of polished into the scotch area to make the blend area as normal
@rihardsnekrasovs3 жыл бұрын
Good work, how do you go about with the paint matches so many times paint will not match ?
@cvrpov3 жыл бұрын
Some knowledge, blowing into next panel and a bit of luck
@scottbacon20972 жыл бұрын
Spray outs too? Colours have different variants. If you are after paint for yourself. Some paint supplier can match your paint using a spectrometer.
@bilalahmed2123 Жыл бұрын
Good job
@cvrpov Жыл бұрын
Thanks
@garystrain73053 жыл бұрын
Love the videos you make it look easy what mm is ur primer gun setup
@cvrpov3 жыл бұрын
Think its a 1.3 pal
@lewigas2903 жыл бұрын
Is that a W300 you use for your 1K primer and if so what tip size have you got in it? Seems ideal for the job when fluid and fan wound in. Cheer and great vid as usual. Keep em coming!👍
@cvrpov3 жыл бұрын
1.3 mate. Probably a bit too good for a primer gun but it works and it gets some hammer and keeps going. I often wind the fan right in and have it in pistol form which works well too.
@lewigas2903 жыл бұрын
@@cvrpov Thanks for that. Very much appreciated 👍🍺
@legioner9 Жыл бұрын
Best 😊
@cvrpov Жыл бұрын
Thanks
@crystalawen9 ай бұрын
Thankyou 👍
@cvrpov9 ай бұрын
Welcome 👍
@mreightytwenty87093 жыл бұрын
Hi mate can you tell me. I do similar smart repairs like you. Iam thinking of upgrading to a sri or a pro lite? for clear coat... Iam using a FLG 5 for clears coats now...which i find not to bad...Which one should i go for? I know you use a pro lite? Thanks
@cvrpov3 жыл бұрын
AFAIK The original Sri pro is now discontinued (pink one). The flg is a good gun but I know a couple of guys who have upgraded to a pro lite and noticed the difference. Its an excellent gun.
@qaisernawaz7709 Жыл бұрын
Hi which primer and clear coat u use .. thanks
@cvrpov Жыл бұрын
Indasa high build primer and I use diamond clear from express paints (uk)
@daleaxe10302 жыл бұрын
Top dog bro 👌
@cvrpov2 жыл бұрын
Thanks for watching
@kimpoyvillanueva6253 Жыл бұрын
How much the repair of that type?
@cvrpov Жыл бұрын
150.00 +
@CJLTV2 жыл бұрын
Is there a concern with the sandpaper hitting the tire?
@CJLTV2 жыл бұрын
First time car owner. Been learning a lot from here (:
@cvrpov2 жыл бұрын
Try not to hit the tyre
@johngresty7583 жыл бұрын
Once the laquar was fully cured did you do any buffering?
@kobrien614 ай бұрын
Nice !
@wilverlima9653 Жыл бұрын
how long did you wait to apply the fade out thinner?
@cvrpov Жыл бұрын
Apply immediately after spraying
@alexis985592 жыл бұрын
Could you achieve a similar blend using rattle cans with this tactic?
@cvrpov2 жыл бұрын
Yes
@alexis985592 жыл бұрын
@@cvrpov Awesome, im going to try this soon on some metallic paint on my car, wish me luck 😬
@matthewdavies67223 жыл бұрын
Hi, why did you polish the panel in the beginning? Does this help with the colour match to get the paint back to original unfaded white
@cvrpov3 жыл бұрын
Its more to remove scratches, tar and any previous waxes etc
@peetjelieverd-ky3gb5 ай бұрын
@@cvrpov its nonsense he sprayen the whole thing
@itsjustforebay3 жыл бұрын
Nice job mate! What primer are you using has it got a good build? Be handy to know 👍
@cvrpov3 жыл бұрын
hi mate, it was a 1k ready for use primer on this job but sometimes i use a 2k which offers better build
@itsjustforebay3 жыл бұрын
@@cvrpov What brand is it mate? I only use 1k cans but find them very clumsy especially when trying to keep the area nice and small 👍 wouldn't mind trying it out. cheers
@PanZehir18813 жыл бұрын
can I use airbrush for this jop ? I dont have big compressor and pro. airgun
@cvrpov3 жыл бұрын
Get rattle cans. Air brush will not be a good idea
@christiand7437 Жыл бұрын
It's great if you have access to a body shop!😂 JK, nice work. I got a paint transfer I have to address...
@cvrpov Жыл бұрын
Hope the vid helped in some way
@seenbyme66963 жыл бұрын
How long do you wait from your first taki coat of clear until your second coat?
@cvrpov3 жыл бұрын
Depedns on the time of year but around 2 mins on this video. Wait till the tape around it is tacky to touch
@driveryte2 жыл бұрын
Easy way to repair, use 320 grit then 500. Primer, rub primer with 500. Scotch pad area . Paint n lacquer Dont use material by over useing masking tape and brown paper Dont forget to cover the car otherwise you'll spend hours cleaning the over spray
@cvrpov2 жыл бұрын
👍🏼
@dostofficial3 жыл бұрын
can you do a video on a silver car?
@cvrpov3 жыл бұрын
Yes i will at some point. thanks for watching
@minkbandem80933 жыл бұрын
What spray gun do you use for primer?
@cvrpov3 жыл бұрын
A 1.3 iwata
@jonnymbuna3 жыл бұрын
Which plastic primer do you use?
@cvrpov3 жыл бұрын
Its a 1k based primer, ready for use out of the gun
@terryorourke15543 жыл бұрын
What size compressor do you use for these jobs?
@cvrpov3 жыл бұрын
100 litre 3ph belt driven
@ernstwollweberghost22546 ай бұрын
Incorrect C2 continuity, becase of too much sanding. This is easy to spot in the reflections.
@Waxvalet2 жыл бұрын
What brand of 1k primer do you prefer mate
@cvrpov2 жыл бұрын
I use one in a bottle pre made from Nationwide smart repair. I just leave it in a dedicated gun and use when needed
@maikgaede13 жыл бұрын
More Videos.👍👍
@cvrpov3 жыл бұрын
Working on it man 👍🏼👍🏼👍🏼👍🏼
@darrenparfitt15203 жыл бұрын
Are you using 2k or water based colour ?
@mreightytwenty87093 жыл бұрын
solvent....
@cvrpov3 жыл бұрын
Solvent base, 2k clear
@ceasarnawaz81793 жыл бұрын
Which compressor you use
@cvrpov3 жыл бұрын
90 ltr abac belt driven 3hp
@timmythebeast57833 жыл бұрын
wich adhesion promoter do you use?
@cvrpov3 жыл бұрын
I've never used any adhesion promoter and I've never had any issues
@willysir88368 ай бұрын
Do you aapply a 2k clear coat ?
@cvrpov8 ай бұрын
Yes
@anuppatel6243 жыл бұрын
How much does a repair like this cost?
@cvrpov3 жыл бұрын
prices for most repairs of this kind can range from 120.00 to 150.00
@jamesrandolph60213 ай бұрын
Easy for some perhaps.
@LetRippr3 жыл бұрын
Which areas do you guys cover for repairs?
@cvrpov3 жыл бұрын
Derby, Nottingham, Chesterfield, Mansfield
@peetjelieverd-ky3gb5 ай бұрын
This worke double
@spellbreaker660910 ай бұрын
Wish you was in philly
@Snip593 жыл бұрын
Pity your not in Sydney.
@cvrpov3 жыл бұрын
Defo
@diamonddetails94452 жыл бұрын
Brilliant 💯👍👍 But music DURING vids would be nicer 😎
@cvrpov2 жыл бұрын
Noted 👍🏻
@kadiraktas50783 жыл бұрын
👍
@cvrpov3 жыл бұрын
🤜🏼🤜🏼
@paulff33 жыл бұрын
Nice job but let's be fair. It's white.
@cvrpov3 жыл бұрын
It is white to be fair
@Lotus.F2 жыл бұрын
Good job, but if you have all those tools you're probably a pro anyway so won't need to watch the video.
@cvrpov2 жыл бұрын
Same methods
@mecanicageneral6153 жыл бұрын
Is it so hard to loose the bumper just a little bit?. Then where is the degreaser??. Big fail on that.
@mreightytwenty87093 жыл бұрын
He used a apc degreaser to start with !!!!!!
@cvrpov3 жыл бұрын
not really logically necessary to remove the bumper and i dont have any problems doing it as in the video. I used polish, apc and also 2 different panel wipes on the repairs. thanks
@sahilyas91543 жыл бұрын
You have a phone or somthink
@cvrpov3 жыл бұрын
Yes
@peetjelieverd-ky3gb5 ай бұрын
Polich was bulschit
@joeyboombatz90985 ай бұрын
Lmao “easy!” What a shitty title
@gweflj Жыл бұрын
Let’s see you do that with a metallic🤣
@ignasvelicka89863 жыл бұрын
Mate which lacquer are you using?
@cvrpov3 жыл бұрын
Diamond clear express paints
@Balystube3 жыл бұрын
@@cvrpov 5 mins hardener? Assuming you did the job in January?