How To Fix Sun Visor Not Staying Up, DIY Loose Visor Solved

[@tammieaf2712]

Thanks for actually resolving the problem! All other videos I watched say "how to repair" and they should say "how to replace" because their idea of repairing it is to replace it with a new one. Mine looks brand new but it's floppy so I'd rather fix the flop and keep the original visor. Thanks again for presenting an economical solution!

[@WorldRandomVideos]

Hello my friend, I am thankful and grateful to read your wonderful comment and great support, and I am glad that you found my video is helpful, thank you so much and all the best 👌 👍

[@josephchacon72]

That’s super smart! Thanks

[@WorldRandomVideos]

My pleasure 😊 🙏, I really appreciate your wonderful comment and great support 😀 👍 ❤️, thank you so much and all the best 👌 👍

[@SzymekCRX]

That is so elegant! If You paint that clip to the color of the visor it would be perfect :)

[@WorldRandomVideos]

Hello my dear friend, thank you so much 😊 and all the best 👍, I didn't care too much to make it looks much better because after the mirror broke, but yes this method it works excellent, 😀 best regards ✨️

[@kentsparrow8479]

good idea ! i think i will use one clamp but then drill through the clamp holes and put a small bolt through it. then i can tighten the bolt to adjust the tension

[@WorldRandomVideos]

Hello my friend, Genius idea 💡, that's even better so you can adjust the tension, brilliant, yes that'll work excellent thank you so much and all best 🙏

[@fredfeld7368]

@@WorldRandomVideos Just don't drill through the wires!

[@WorldRandomVideos]

@@fredfeld7368 👍👍👍, thank you my friend and all the best ❤️🙏

[@blakebrown534]

You can actually open the top at the sewing seam and then drill a hole through under the metal bar where there's a piece of plastic that breaks. The plastic holds the pressure of a spring on the bar and it just breaks over time. If you drill a hole and put a bolt through it (cut bolt as short as possible while fitting a washer and nut over it) then cut off a tiny piece of plastic in the way on the opposite side then you can put the two halves back together (use some fabric tape to hold it tight after) and then pull the fabric lining back over and sew it back up at the top.

[@WorldRandomVideos]

Hello my dear friend, thank you so much for great information and excellent ideas I learned from you very useful genius idea, I don't know why and almost every time I buy a car sun visor is bad, in my next video I will do just what you mentioned, I really appreciate 😀 thank you again and all the best 👍.

[@JoshuaLinn]

This is a very helpful video, thank you very much for posting.

[@WorldRandomVideos]

I am so glad to read your wonderful messages and that you found my video was helpful, it's my pleasure 😊 to hear that, thank you so much and all the best 🙏💟🙏💟🙏

[@JerseyRepresenting]

How did you figure it out? Or was it a trick you learned? Thank you! Greetings from Asbury Park, New Jersey USA!

[@WorldRandomVideos]

Hello my dear friend, I figured it out my self after hours of thinking I came up with this idea, I also have other videos and different way to fix sun visor, if you like you can watch that videos too, thank you so much 😊 and all the best 👍 👌 ❤🙏

[@practicewithjc]

Well done sir!

[@WorldRandomVideos]

Thank you so much 😊 and all the best 👍

[@serrios2000]

Very nice . I guess I will sell some clamps and make some crazy ass money

[@WorldRandomVideos]

Awesome, thank you so much and all the best 🙏😊

[@michaelslack6891]

Thanks for da video!

[@WorldRandomVideos]

My pleasure 🙏, thank you and all the best 👍

[@andrewboyles3412]

Very interesting! What thickness of metal bracket did you use and how long did it take you to form it to the correct angle on your bench vise?

[@WorldRandomVideos]

Hello my friend, thickness is 1/16 of inch 1.58 mm, it took me about 5 minutes but I used other metal bracket thickness 1/8 of inch didn't work because it’s too thick and squeezed the sun visor hard to rotate so after trying and playing with metal spent about 15 minutes, Thank you and all the best.

[@bmoreforlyfe1278]

Pretty cool. Dont wanna thrash it out like that tho.

[@WorldRandomVideos]

Thank you 👍 and all the best 🙏☺️

[@alanascencio8232]

God bless your persistance brother

[@WorldRandomVideos]

God Bless brother 🙏😊🙏 and all the best ❤️🙏❤️🙏, thank you so much ❤️

[@lewidlivelewid]

Very ingenious!

[@WorldRandomVideos]

Thank you so much 👌 💓, and all the best

[@JoselitoRE]

Buen trabajo pero solo para quien tienes esas maquinas jeje

[@WorldRandomVideos]

Thank you so much 😊 and all the best 👍

[@nehoha]

Good idea! Thanks!

[@WorldRandomVideos]

Thank you so much 😊🙏😊🙏

[@paulwatson1507]

❤great job!

[@WorldRandomVideos]

Thank you so much 😊🙏🙏🙏and all the best ❤️

[@allthingsdarrelld]

thanks!

[@WorldRandomVideos]

My pleasure 😊 🙏

[@jaiprem7413]

Good job 👍

[@WorldRandomVideos]

Thank you so much 👍🙏 and all the best ❤️🙏

[@davecurry8300]

At least he is having a go. All these negative comments, where are your videos ?

[@WorldRandomVideos]

Hello my dear friend, I am sorry I don't understand , what do you mean by negative comments? And videos? Thank you 😊

[@lcastillotx]

...not pretty....but effective.

[@WorldRandomVideos]

That's right my friend, new one costs about $80-100 plus shipping, Thank you and all the best 👌 👍

[@w.loczykij5354]

On this car I'd put... Velcro :) No disassembly.

[@WorldRandomVideos]

Some of car sun visor are expensive so I thought to fix it and use it instead of buying new one some of them about $160 or more, Sun visor are very important especially during sunny days or sun set while you are driving without sun visor you can't see nothing, maybe sunglasses help butbi don't carry sunglasses or I forget it, so sun visor becomes necessary, 😎 😉, thank you and all the best

[@manuelvazquez6218]

🤣🤣🤣 asi empieza el blindaje del vehiculo... se mamó

[@WorldRandomVideos]

Thank you

[@Dixi_Grl]

You could’ve put those clamps on without removing the visor. 😊

[@WorldRandomVideos]

Hello my dear friend, yes that's right, but I thought to open it to see what's inside or what other ideas can be use to fix it without clamps, thank you and all the best 👍

[@aros007z]

A lot easier with the visor off tho!

[@WorldRandomVideos]

@aros007z , yes of course, thank you so much and all the best 👍

[@ronvilardell5586]

Looks like crap. It's the other side that is the problem.😮

[@Studat]

that kinda looks shocking 😬

[@WorldRandomVideos]

It works fantastic, Thank you and all the best 👍

[@lorenzowest7756]

Why in the world are you taking so long to explain how to tighten this up this is a waste of video time. I got bored in the first two minutes of watching this.

[@WorldRandomVideos]

Hello my friend, thank you so much for your concerns , this is how I learn from you and other people, to tell me my bad and mistakes , I will make sure walking to much or waiting time during videos won't happens again, thank you and all the best

[@tammieaf2712]

Some people learn by watching. He just taught me how to solve this problem without buying a new visor.

[@Q卄乇乇卄]

There’s a thing called fast forward, it’s not that difficult..

[@WorldRandomVideos]

@Q卄乇乇卄 hello my dear friend, I am sorry , I either forgot or not known this video will be in some parts boring, your comment is valuable knowledgeable, thank you 😊 and all the best

[@WorldRandomVideos]

Thank you so much 😊

[@njordan148]

Everyone doesn't have the skills and tools you have. Some things are better off to just replace.

[@WorldRandomVideos]

Yes of course the best is replaced it, but some of sun visors are expensive so it's better to try to fix it, thank you so much and all the best 💕💕🙏💕

[@Mattmate]

Bodge

[@WorldRandomVideos]

"Thanks for your feedback! I'll keep working on improving my techniques. If you have any tips, feel free to share!"

[@JAGUAR24-xu8te]

not a good fix, poor technique

[@WorldRandomVideos]

It was a try and it worked for me, can you tell me a way to fix better than this one? Thanks.

[@Q卄乇乇卄]

Ok, where is your video? Show us a better one then.