READ BEFORE ADJUSTING!!!: Though I made many disclaimers in the video that you will come across if you watch, I did not mention lens coatings because I mostly only work on my sunglasses with standard european sun lenses from Luxx or Safilo. BUT, you must know that too hot of heat concentrated on the bridge area might ( and has caused, according to some comments) damage to anti glare and blue light coatings, to name a few. This was the furthest from my intentions and that's why I really wanted you all to take this with a grain of salt and use your own discernment and DEFINITELY take them somewhere if you are at all uncomfortable. Though I used to adjust glasses as part of my job, I still get nervous with my own frames at home, because a certain part of this will always be a little unpredictable. For lens coated glasses, I highly recommend going first and foremost, to an optician. IF YOU ARE UNABLE TO DO SO and need an ADJUSTMENT TO THE TEMPLES fast, if you are ONLY adjusting TEMPLES that are ACETATE, I would suggest my warm/ hot water dish method, because you can wrap the lenses with a cloth and they won't be close to the temple. Here is that video: kzbin.info/www/bejne/pH7Ke5iCpbmogsk Basically the only safest option for a bridge adjustment with heat ( either a bead box or a warmer) , whether at home or at an optical shop, would be to remove the lenses before adjusting, but this is why I highly suggest a professional because changing the shape of the bridge causes issues with lenses popping back in sometimes. I hope this has been informative. Please use care and when it doubt, take them to a shop.
@messageoflove19692 жыл бұрын
It never entered my mind to heat up sunglasses with a hair dryer to make them tighter. I dropped down into the comments to see if I should be concerned about heating up the lenses too much. It sounds like I have exactly the kinds of lenses that I should be concerned about. So I popped out the lenses and used a hair dryer to shape my sunglasses to a tighter fit. It worked perfectly. Now I like my sunglasses again! It’s just about like getting a new pair. Thanks for making the video.
@KristenLB2 жыл бұрын
@@messageoflove1969 Thanks for letting me know, I always cross my fingers people are having luck with this method. You were brave to take your lenses out :) Glad it all came together
@marcohernandez66837 жыл бұрын
Hair dryer on at t- 7:54
@MichaelLaHonta7 жыл бұрын
Oh, Thank you so very much for making this video. I just don't have the patience to go see the doctor again and get another pair of glasses. You saved me. Now I will not get headaches.
@andresastudisho Жыл бұрын
I did this a bunch of times, for a pair of RB Vagabond. The temples were kinda weird and it felt like the sunglasses kept sliding down. I bent the temples covering the lenses and finally got them adjusted to my face. I later tried to do this on a pair on RB 4195 Wayfarer Liteforce, but that material is a whole other level. Awesome video!
@lexzbuddy3 жыл бұрын
I just ran the bridge of my plastic framed glasses under the hot tap then adjusted my frames per the method that you demonstrated to open up the legs. Worked a treat :) Thanks so much for the video, no more pain from my glasses squeezing my head behind my ears. You are a life saver! Thanks.
@KristenLB3 жыл бұрын
I'm so glad to hear another success story from this video, it's been a while since anyone has reported back! Thank you so much for letting me know and I'm so glad it worked for you :) Take care
@RichGetRichard4 жыл бұрын
Thank you so much... I did this method on the LV Millionaire 1.1's and it did the job! It was too tight on the temple closer to my eyes vs behind the ear, and now they fit perfectly! Thank you!
@rickysantos74372 жыл бұрын
I bought them and I felt they were super tight! Did this really help? How long did you hear them? Thanks for the help!!
@KristenLB2 жыл бұрын
Such a late reply I'm sorry, I have a hard time keeping up with comments on videos such as this one- but thanks for letting me know of your success with these and for the kind comment. All the best!
@boonecreekchick12 жыл бұрын
Kristen! Thank you! I have 2 pairs of Wayfarers that I bought and have not been able to wear in my small face, and I love them. Your simple trick worked by heating the arms. So excited to wear them out finally. Thank you!
@KristenLB2 жыл бұрын
Hey!! Thank you Dina!! Thanks for letting me know that it worked for you; it's still really good to hear especially when I look back and think how much better I could've filmed this to show detail haha. I have had to do this on some of my wayfarers recently too. Take care!
@Knowfere Жыл бұрын
I spent $500 on 2 pairs of prescription sunglasses and both ended up with the arms extended way out of shape. I have heat guns at my work and heat resist tape. I put some tape on the lenses, heated em up for less than a minute, bent them into shape and I couldn't be happier! Thank you, and thanks for the tip on protecting the lenses during the process.
@KristenLB Жыл бұрын
Isn't it crazy how they stretch out so much with a lens in sometimes? Thank you so much for the kind comment, I'm really glad it worked out for you!
@dianas.92893 жыл бұрын
Kristen, thank you very much for making this video! You've saved me time and money: I've just fixed my new Persol that kept sliding down my nose. It fits me perfectly now, and ll I needed was your advice, some cloth to wrap around the lenses and about two minutes!
@ferretisland29456 жыл бұрын
Thank you!!! Now 3 pairs of my glasses fit perfectly! Easy peasy 👍
@JanahSmirnova Жыл бұрын
Girl, thank you sooo much! You saved my sunglasses!
@KristenLB Жыл бұрын
Thanks for the comment, really really glad it helped you :) :)
@jasonsarmiento66333 жыл бұрын
Thanks! This worked perfectly. As suggested in some of the comments, i covered the lenses in a paper towel.
@KristenLB3 жыл бұрын
Thank you for this success story!! That or a hand towel sounds really good :) I'm very glad it worked
@JEH803 жыл бұрын
Also a MAJOR thanks from me - you were so helpful and explained it all so well, so that even I could understand it, haha :D
@rohimabegum77345 жыл бұрын
you can always cover the lenses with a small cloth when heating the frame
@Flaquigirl6 жыл бұрын
This was really helpful. It worked on my Wayfarers. Thank you so much!
@08ubik4 жыл бұрын
Thanks Kris. Great tutorial and your interesting use of language is funny.
@curseddude883 жыл бұрын
omg just got Ralph Lauren too - I wear 135 temple length but got 140 want to tighten it a bit! wish me luck
@pharaohosam3 жыл бұрын
Useful, thanks. I'm expecting a pair of Guccis to arrive tomorrow and they'll probably be a bit too narrow for my big head. I'm hoping an adjustment to the bridge will make them look a little better on my face. The hair dryer trick should work on these acetate frames.
@KristenLB3 жыл бұрын
I hope, but definitely be careful! :)
@meliyke17 жыл бұрын
YOU ARE SO SO PRETTY, THANKS FOR THE VIDEO
@lionnn12334 жыл бұрын
This is why i love youtube. Bought the perfect pair of sunglasses only to have it be too tight. I did this and now i don't even want to take them off, perfect fit. $70 pair of crapeyewear fits better than a $150 pair of ray bans that i cant return anymore. Live and learn i guess. Why must life's mistakes be so expensive lol
@KristenLB4 жыл бұрын
thank you for watching. So you really like crap? I've almost purchased a couple times!
@lionnn12334 жыл бұрын
@@KristenLB Yea i bought "the heavy tropix" pair and they look great and quality is nice as well. After i used the blow dryer trick to make them looser they feel perfect
@CraigMR-SS7 жыл бұрын
Thanks for the tip. I have an odd problem where one ear is a tad lower then the other, so I need to make my shades intentionally uneven :) I'll try this as opposed to bending at the hinge as I've done in the past..which sometimes ends catastrophically!
@jennbride5 жыл бұрын
Thank you for this great video!! I am excited to try your techniques to get a better fit on my sunglasses. Thanks!!
@KristenLB5 жыл бұрын
Thank you so much for the lovely comment, I'm so glad it helped! I have an updated version using hot water that you can find in my recents and the audio is a little clearer. Glad I can help
@abdulaziza96172 жыл бұрын
Thanks Kristen that was helpful
@KristenLB2 жыл бұрын
Glad it helped you, appreciate the comment!! :)
@DatzBunz6 жыл бұрын
Loved the video, the only one I could find without using hot water or a bead machine hot box. I like the guy below in the comments am looking to adjust the bridge on my Oakley holbrooks. They are way too tight on the temples and took it to a eyeland and they could only adjust the sides around the ears slightly. If I had a sunglass hut by me I would definitely had went there. I am going to try the heat on them carefully and hopefully it will help! :)
@KristenLB6 жыл бұрын
TIMMAE what did they use on the temples? Good luck and be careful and thanks a ton for the kind words!
@DatzBunz6 жыл бұрын
KLSunwear They had a hotbox type of machine they used for the sides and it helped a little bit but ghe problem is within the bridge. I need to stretch it out and they told me to wear them and after time it will stretch but I get tension headaches on my temples from them so that wont work. So far with your method the bridge is just slightly getting to where I need it. Still tight on the temples however. 😅
@KristenLB6 жыл бұрын
Oh, weird they didn't have the heat air thing, totally forgot what it's technically called, but the "hairdryer with the lid" so it traps heat. I thought most had those so I'm surprised! So you got them a little looser? And even after they adjusted the temples, they're still too tight? that's unlucky! hope you get them more comfortable
@louisleung81213 жыл бұрын
Really helpful! Thanks!
@edgy84814 жыл бұрын
Great tutorial!
@Umairbaig9232 жыл бұрын
Wow ... Thanks alot ♥️
@bfrank7153 жыл бұрын
This is great! Many thanks!!
@KristenLB3 жыл бұрын
Thanks so much for watching as well :)
@hilaryh99155 жыл бұрын
That’s very helpful, thank you.
@stephenlepore44762 жыл бұрын
informative. thank you!
@KristenLB2 жыл бұрын
glad it helped, thanks for letting me know!
@taniasilva26715 жыл бұрын
Thanks this really worked for me my sunglasses dont fall off anymore.
@kristinecee46867 жыл бұрын
this was so helpful!! thank you!!
@KristenLB7 жыл бұрын
kristine Cee oh good thank you! I am glad you could see get something out of it despite the quality :)
@Rami.F7 жыл бұрын
Your videos are always fun to watch disregarding the video quality. Did not post lately; I thought you quit..... :P
@KristenLB7 жыл бұрын
Ray F thank you. I put a disclaimer in the info section and in the other tutorials recently uploaded that these were old videos I found and the quality was EVEN worse if that were possible. Thanks for still watching.
@Anand-yu1sg4 жыл бұрын
nice hairdryer
@geraldballa26202 жыл бұрын
It worked. Thank youuuu
@soubabai4 жыл бұрын
Really helpful thank you so much 😊👍
@Jasonysz3 жыл бұрын
CAUTION!!.. in the process of heating the bridge, I have also melted the coatings on my lenses, result was not pleasant... I have tried this method BEFORE watching your video, which means my falure has nothing to do with you, but to everyone who considering trying this method of adjustment, be warned.
@KristenLB3 жыл бұрын
I'm so sorry to hear this. I've been in a serious back and forth about taking this video down. Because as many disclaimers as I made, I didn't mention coatings because I was referring to basic european sun lenses from Luxx or Safilo :/ I so hate to see comments where there has been damage and thank you for letting me know. I'm going to pin a comment about coatings.
@flee782 жыл бұрын
You're #1
@stevesaumell97796 жыл бұрын
Hi. Will this work for Oakley Holbrooks? Mine are too tight out of the box. Thanks
@KristenLB6 жыл бұрын
Hi there! :) I think with Oakleys ( which I believe, but may well be wrong, that the frames are injected material of some sort), I would take it to an optical place instead of trying those myself. I tried to do a search for you on exactly what they're made of, and couldn't find any info about the frames. In my opinion, they have more of a hollow feel to be so lightweight, so I'm not sure what the heating guidelines need to be to do that safely so I'd strongly recommend having someone at an optician or better yet sunglasshut, do it if you can find one of those nearby. I would be too afraid to do those myself if it were me, I'm sure it is adjustable, it would probably be more touchy if you overheated that material to not break them, I feel. I hope that helps!!
@stevesaumell97796 жыл бұрын
KLSunwear Hi. Thanks I’ll go to the mall where I know they sell and adjust.
@DatzBunz6 жыл бұрын
same here :/
@DebsDemurrer4 жыл бұрын
What if the arms are angled downward and I like my arms straight? Is it possible to fix that? I have some plastic and metal armed pairs I would love to adjust
@KristenLB4 жыл бұрын
Hi! yes you can! I have a video doing that on some carfia sunglasses, I can share the link, but I have not tried that particular fix myself on metal, so I'm not sure and can't urge you to try that at home. Are the plastic ones acetate? Going to about 8:00 min should help here: kzbin.info/www/bejne/pH7Ke5iCpbmogsk
@stefanradovanov47385 жыл бұрын
Thank you, loved your video. I have a Ray-Ban RB4147 but they feel a bit tight around my ears. What method should i use to loosen them up just a bit?
@KristenLB5 жыл бұрын
Hi, those are made of nylon and getting the temperature right to adjust those is a bit tricky so I'd find a sunglass hut or optician for that one. My method above I feel confident in saying works for acetate safely but the other materials require someone who's done it more I feel. Good luck!
@christyalejandre81684 жыл бұрын
Are those Bose??
@the.magnus6 жыл бұрын
You are so awesome and helpful. I LOVE YOU! I have Rayban New Wayfarers that keep slipping off my nose, I was thinking of using a heat gun as you mentioned the plastic is thicker on the Raybans, would that damage them as the heat gun is more powerful than a hair dryer. Also do optical places use the same method to adjust sunglasses or do they have some kind of machine?
@KristenLB5 жыл бұрын
So sorry that I'm seeing this so late, and I'm sure you've found a better answer by now than waiting on me, lol. Sorry again, I'm filtering through one's I've missed. The RB new wayfarer is made of nylon, so I'm not sure if it heats the same way as acetate, and some of those colorways appear to have coatings, so I'm not sure I'd recommend the home version, just in case something happened, an optical could at least replace them. I don't think I've ever seen anyone adjust that model but I'm pretty sure it would move the same way, might just require a little more heat? But yes, opticals have a heater that blows a stream of air and the more outdated places have a hairdryer type machine that has an attachment where you sit the glasses and close a little lid where the heat can be concentrated. The only difference is they also have hot boxes full of little glass beads that are really hot that they can dip glasses in to adjust but I don't tend to care for those because if left slightly too long, they can create permanent dents in the materials. Woah that was an essay for you, haha, but overall, I'd say hairdryer on low-medium and feeling it out or warm water wouldn't be too risky.
@everydayknowledge25642 жыл бұрын
hi where can i watch instructables with less talkies?
@BellaFrice Жыл бұрын
when you do the bridge, does that make the bridge bigger or just help the tightness on the temples?
@KristenLB Жыл бұрын
it can kind of slightly help to make the temples wider apart if nothing else is working, or also make them narrower, but it just depends on what the original issue is
@vbrown2384 Жыл бұрын
When i place them upside up they're even, but when i place them uspide down - they're not.. why is that happening ??? One arm is slightly higher than the other
@tie-see93086 жыл бұрын
You're really pretty!
@eddie1957773 жыл бұрын
If I don't have a hair dryer how can I heat the plastic up? Thanks
@KristenLB3 жыл бұрын
Hi! the only other thing I would suggest is hot water in a bowl and dipping the temples in but I wouldn't put the lenses in the bowl. So it depends on what part you need to adjust.
@me-ln4pd5 жыл бұрын
My glasses have plastic frames but with metal arms inside the ear rests. I'm guessing this technique won't work and I should go to a specialist?
@KristenLB5 жыл бұрын
Yes, I definitely would on that one just to be safe.
@me-ln4pd5 жыл бұрын
@@KristenLB Will do, thanks!
@Cristiandenis84 жыл бұрын
thank you so helpful
@SanCuervoAbuelo6 жыл бұрын
Hi, I've got two pair of rb Justin's. One from Rayban and one from eBay (originals). The eBay ones are deformed on the temples, they got a curve as if the previous owner had a fat head. Can this method be used to remedy this problem. They fit great, people don't notice. Is just asthetics for me. Thanks in advance. Great videos
@KristenLB6 жыл бұрын
Hey there! I only 100% suggest this method if the frames are acetate, and Ray-Bans ( with a few exceptions) are nylon. The Justin is a matte nylon so I wouldn't try it at home ( if I were you). The nylons take heating differently and need a gentler method/ lower or more controlled heat, so I'd highly advise sunglasshut for that because their main brand they work on is RB. Failing that, optical place. Thank you, good luck.
@SanCuervoAbuelo6 жыл бұрын
KLSunwear ok, thanks ✌️,
@jimatmeijs2695 жыл бұрын
Isn't it bad for the plastic glass of the glasses to get hot? I mean, don't they lose their protection function? Just curious
@KristenLB5 жыл бұрын
No, as far as acetate goes at least (because I have the most experience with that though other materials can be heated with caution) they can take quite a few adjustments. Just as long as you don't concentrate the heat on the lenses too much
@jimatmeijs2695 жыл бұрын
@@KristenLB So when the lenses are warm, it should be fine? I let my glasses in the sun for a while. They werent hot, just warm. You think it would harm the UV filter, polarisation, anti glare etc? I hope not!
@KristenLB5 жыл бұрын
@@jimatmeijs269 depends on the brand, but usually higher end glasses , their lenses shouldn't be ruined by a few times left out in the car although it's not good to do. You should be fine :) repeated exposure isn't good though and try to keep them away from alcohols or alcohol based cleaners and they should last.
@justingee43983 жыл бұрын
Just got a new pair of Gucci eye glasses they are kinds metal and then switch back by the temple to somthing I think.... any advice before I fake it untill I make it ? Don't delete the video your super cute in it trying to explain and record. When we get married one day it'll be funny to watch ;)
@thedmv11105 жыл бұрын
Hi, Have you tried this technique on Persols? I need to adjust my 2803s and was wondering if the hair dryer worked better than hot water. Haven’t tried either yet. Thanks!
@KristenLB5 жыл бұрын
Hi! No I haven't tried the hair dryer method on Persols, but from the looks of it, that model may be easier to maneuver with hot water. I'm planning to upload a video showing that method too, but there's a few other here on YT I think. I'd get it a little hotter than what the tap would do, I usually get mine until I can just dip my finger in but not leave it in if that makes sense. I bet 15-30 seconds doing that would probably work better for you than an on and off of a hair dryer trying to get them malleable might work better, but it's all down to you :)
@thedmv11105 жыл бұрын
Cool, thanks. I tried the water as hot as it came out of the tap, but didn’t try to bend very hard (was scared to break). Anyway, didn’t work. I may try hotter water, but a lady at sunglass hut who seemed very knowledgeable on Persols in particular, said they will eventually mold to fit my face. Have you known Persols to do this? Thanks again.
@KristenLB5 жыл бұрын
@@thedmv1110 because of the stem system they do have a tendency to mold better than others I think but from my experience it would take a while being out in the heat with them on for them to conform. Are they too tight or too loose? I can understand why you hesitate though.
@thedmv11105 жыл бұрын
They’re tight right at the temples, which is fine, but flare out a bit and don’t feel tight enough at and behind my ears. They slip down when I look down. Thanks for the quick replies, good vids.
@KristenLB5 жыл бұрын
@@thedmv1110 ah, yeah you might could try again with slightly hotter water where it's loose and bend them at kind of a diagonal inward if that makes sense, because the wire core naturally seems to go that way, if you wanted. I think the temple area tightness might sort itself out with the stem system like she said. No problem, thanks so much, means a lot to me.
@charisamcginty68093 жыл бұрын
Can u also do this with LV sunglasses?
@KristenLB3 жыл бұрын
What part needs to be adjusted? the arms? I wouldn't try anything but the arms if it were me, and only if you can go online and verify it's cellulose acetate.
@EmreY257 жыл бұрын
would this work on Ray Ban New Wayfarers? The top of my right ear (the spot where my temple sits on my ear) hurts when wearing most glasses, what could I do to fixt that.
@KristenLB7 жыл бұрын
Emre Y hey! typically new wayfarers can also be adjusted with this method but its more of a nylon they use so it heats a little differently. The ear issue makes it a little harder and I don't think its something you'll be able to fix yourself-when you lay them down flat on a table do both temples lay even or is one raised up? if they're level I am betting one ear is slightly higher than the other its very common. You'd have to have an optician bend the actual temple at the hinge a certain way to take the pressure off your ear. If you want you can send a picture of the glasses laying flat, one from above and one from a side angle to klsunwear@Gmail.com. It would help to see them.
@EmreY257 жыл бұрын
Just sent you an e-mail! they are indeed tilted on one side
@Persplagon7 жыл бұрын
I have plastic frames that sits a little high on my bridge. Would this be fixable on my own or should I take them to an optician?
@KristenLB7 жыл бұрын
Persplagon you mean to where there's a noticeable gap above your bridge?
@Persplagon7 жыл бұрын
Yea there's a gap there because the nose pads are resting more on the side of my nose. I have a wider bridge. Because of that I think they sit a little high overall.
@KristenLB7 жыл бұрын
Persplagon I was going to say you could try unbending the temples a bit because sometimes that makes them sit too high if there is too much curve but without seeing them i can't properly advise you. I think that's gonna be one for the optometrist.
@Persplagon7 жыл бұрын
I'll probably ask them then. Thanks!
@HappyTrailsWagnTails6 жыл бұрын
My new native "haskill" sunglasses are hurting me right above my ears. I wanted to run this by you since they use a different type of plastic, I think.
@KristenLB6 жыл бұрын
Hey!! I hope I got to you soon enough! I wasn't notified of this comment until I went to another page. Yes! It's some sort of co-injected material and I'm not sure of its properties and what it can and can't take so I would definitely not try anything at home and take them to an optical. And if they don't seem familiar with the brand, tell them what material it is and say something like " I know it's touchy", since apparently in the optical field, sometimes people don't know and try it like any other thing. Sorry for such a late reply and I hope you work it out! :)
@HappyTrailsWagnTails6 жыл бұрын
KLSunwear I appreciate your input and tip on what to say. Thank you so much! Have a great day.
@greyhoundrick55687 жыл бұрын
Excellent video! Is it ok to do this with rimless frames? Thanks again!
@KristenLB7 жыл бұрын
Hi!, which part are you trying to adjust? what brand/model of glasses are they and what's the problem?
@greyhoundrick55687 жыл бұрын
Thanks for the response. I want to lower the lenses slightly and in order to "open up" the nose pieces I will need to pull them apart (a bit wider than they are now). The noise pads are connected to a vertical metal piece which is attached (drilled) directly to the lenses. Im just wondering if I heat the metal if Im ok doing this with the nose piece attached directly to the lenses. Thanks so much for your time! :-) Oh, they are Nikon lenses and the frames are Silhouette.
@KristenLB7 жыл бұрын
Ah! For anything Silhouette, you're going to want to take those to an optical place and have them adjust them instead. I say that because the plastic vertical piece you're referring to is more fragile and/or Silhouette frames need really gentle, specific manipulations with tools that usually can only be found at an optometrist. Even if you tried, it wouldn't act like regular plastic. That's my best advice as I don't want anything to happen to them, best to be on the safe side! Sorry this method doesn't work for every case, but thanks for asking! Hope you get it sorted!
@KristenLB7 жыл бұрын
Silhouette's are durable and very nice and so many people swear by them but when I worked in optical I even had to ask my superiors who had been in the field a lot longer to adjust silhouette's because they can be tricky.
@greyhoundrick55687 жыл бұрын
Thank you Kristen! My frames are made out of metal. Does that make any difference or should I still take them to the optical place? Thanks again for your responses! So nice! :-)
@HeyImRod6 жыл бұрын
Great video, thank you!
@KristenLB6 жыл бұрын
Considering it falls short in a variety of ways, thank you so much for the nice comment! :)
@Bhatt_Hole4 жыл бұрын
DO NOT do it this way for the current blue-blocking computer glasses. At least, not the way shown here. You will ruin the coating, as I found out, and they will be permanently hazy. You must remove the lenses prior to heating the frame. Watch some of the other videos, it's not very difficult to remove the lenses and get them back in.
@leslierod76915 жыл бұрын
Thank you so much!
@jakel777 жыл бұрын
Love your accent.
@KristenLB7 жыл бұрын
Jake Lounsbury haha thank you :)
@bluesash106 жыл бұрын
Thank you!
@MoiAussi185 жыл бұрын
@ 6:45 lickety-split adverb Definition of lickety-split : at great speed www.merriam-webster.com/dictionary/lickety-split But love your voice and in particular your accent. I could listen to it all day.
@KristenLB3 жыл бұрын
Here in the South, I used it right ahahaha
@Barkingspider6 жыл бұрын
Kristin, how do you adjust is the vertex is off? I have to keep pushing the left side of my glasses back. So basically they don’t lay flat. Tks
@KristenLB6 жыл бұрын
Barking Spider hey! What exactly do you mean? Like the lenses don't line up like one sits back further than the other?
@Barkingspider6 жыл бұрын
KLSunwear Yea. Because of a little bump on the left side of my nose they don’t lay parallel to my face. They call it the vertex.
@KristenLB6 жыл бұрын
Barking Spider I have had some glasses do that by nature and I've heated the bridge and sort of slightly twisted as I did in the video but I would be very careful. I would probably go to sunglasshut or optical office for that. What brand and model?
@Barkingspider6 жыл бұрын
KLSunwear they are Persol 649 52mm
@peninapearl64914 жыл бұрын
All my sunglasses are loose ,i go wall mart for fixing but to day i felt they bothered so search for this video.
@leesam9726 жыл бұрын
Thanks
@alterego1573 жыл бұрын
Don't use a heat gun, use a hair dryer or hot water. I melted glasses with a heat gun. Oh yeah, and pop the lenses out first. I melted those too 😂
@ZeroGHome243 жыл бұрын
I'm scared of messing it up just bought my sunglasses and really don't want to have to throw them in the bin.
@KristenLB3 жыл бұрын
I always say, and said it in vid disclaimers, if you don't feel comfortable for any reason, just find any local optical store and they'll do it :) should be easier now that covid is letting up.
@jacobethan29646 жыл бұрын
nice lady it works
@theANGRYjap5 жыл бұрын
Its as if you're reading a book report in front of the class
@kalebyt32227 жыл бұрын
My my warm my orange and my black glasses are broken on the right on my ear
@KristenLB7 жыл бұрын
Kaleb Sizemore you heated them? What are you saying?
@xx-nr6lu5 жыл бұрын
@@KristenLB He is not saying anything, he is practicing how to talk...
@sandrapalacios34084 жыл бұрын
I got bubbles on my glasses 😑
@Revoltick6 жыл бұрын
I feel like I know you. Was your husband in the army?
@pnkrkz6 жыл бұрын
Would not recommend this process with prescription glasses, the hair dryer will damage your lenses.
@KristenLB6 жыл бұрын
If you don't concentrate the heat, maybe so. But if you went to an optical where you could get them to use the actual equipment, I suppose it would be better. How else do you suggest doing it with RX'ed glasses? Doesn't the hot box submerge the lenses somewhat even more?
@pnkrkz6 жыл бұрын
KLSunwear I haven't tried any other way 🤷♂️, but when I tried your method, it took less than 20 seconds before the Rx lenses started to have fractal fissures which blurred the lenses. I'm bringing them this weekend to my optometrist to see if they can be replaced, I believe they still have a warranty on the lenses. The acrylic frames were not damaged, which was a relief. I believe the optometrists' equipment had a nozzle attachment that would concentrate the heat on the bridge so the lens are not as exposed as much.
@KristenLB6 жыл бұрын
Oh no! I'm so sorry! When I worked in optical, ours was concentrated, but it was enclosed with a lid so it also got the lenses heated too, albeit not as much as the frame and never witnessed anything go wrong, so I never would knowingly misguide people. I'm terribly sorry for what happened and I'm glad you have a warranty on them and I hope they get it fixed up quickly. Thank you for commenting. I'll be aware of this going forward, although I've never heard of it, I'll be sure to mention it if I make an update to this video.
@pnkrkz6 жыл бұрын
KLSunwear it's a lesson learned, not everyone is an expert and you did put out a disclaimer on your video. But yes, the lens got cloudy and at first I thought it was just moisture but after a closer look the lenses developed small crazings. I guess not all lenses are equal and can tolerate heat from a hair dryer. I looked into this more and it looks like this might be due to the antireflective coating that was applied on the lens.
@redwater47786 жыл бұрын
Mine are metal . So your method won''t work for me. Not even the expraditing.
@KristenLB6 жыл бұрын
Hey, sorry I don't understand what you mean by the last part. With metal frames, they'll have to be manipulated with optical pliers, and you'll probably want to go to an optician for that because it's easier to mess up a solder joint with metal frames than it is to screw up acetate.
@redwater47786 жыл бұрын
Thanks . I looking for my needle nose plyers . I bought a pair of Ryders at a second hand store for $2.00 An older pair a discontinued model. They are made of very strong steel . I got the nose pads fixed though . Thanks for your video .
@saulenkhanal56552 жыл бұрын
My sunglasses just melted
@rashmichobhiyal68257 жыл бұрын
you're pretty
@sonamhela75856 жыл бұрын
Thank u..
@VAY_NEE_AH6 жыл бұрын
3:49
@lopezfamilyfilms97093 жыл бұрын
you are to cute, smart, funny, and love your curls. Can I marry you? if not I'm cool with having a cup of coffee with you... lol good tutorial. You did awesome. Now I'm confident to do what u did, thanks to you beautiful!!
@birdinyongo1045 жыл бұрын
You guys could buy ear grips on Amazon. Y'alls welcome.😎
@bslickordie6820 Жыл бұрын
2023...🤦 if I had thought..
@danielgoodman42407 ай бұрын
I'm not super certified in anything either
@CARFIA5 жыл бұрын
Hi can you shoot a video for our sunglasses? We sell Carfia sunglasses on Amazon. Please tell us your email. I don't know how to send you a message.
@KristenLB5 жыл бұрын
Hi, my email is klsunwear@gmail.com Thanks for commenting!
@livinjustinmylife2 жыл бұрын
This ruined my polarized prescription Versace sunglasses. DO NOT TRY
@KristenLB2 жыл бұрын
I'm so sorry this happened but check me at 1:52 I tried to throw out every possible disclaimer, both in the video and in a pinned comment. This is for people who feel like they have a steady gentle hand and don't mind the risk, but I was very careful to not mislead anybody. Best wishes to you
@Flaquigirl6 жыл бұрын
This was really helpful. It worked on my Wayfarers. Thank you so much!
@KristenLB6 жыл бұрын
Thanks for the comment/ feedback! I'm glad it did :) :)