How to fix the Ecobubble Samsung heater heating exchange. Water heater not functioning Code 8C

Easy how to guide to remove and replace the heater for the Samsung Ecobubble Washing Machine. How to fix Code 8C for water heater not functioning.

[@michellegorman2512]

Hi... have you any videos on how to replace the door latch/lock on a Samsung ecobubble machine?

[@nect7354]

Great video mate. Just opened my washing machine which was tripping my electric system at home. Turns out it was water heating element. Same as on your video. You made my day. Thank you! Love from poland!

[@ratemygadgets]

Nice one...all the best to you in Poland. Please do like the video and subscribe as it really helps me.

[@oskarssapiegs7968]

To get the heater element out you need to unscrew the middle 10mm nut which relax the rubber seal on the new one you need to tighten it so the seal expands

[@mikelaverty856]

Brother. You just saved me much stress. Multiple days I search and nobody say this in guide. It is necessary or machine leaks. I ordered two new parts as first "was leaking" lol. Thankyou.

[@adnan4188]

good job

[@ratemygadgets]

Thanks. Hope it helped you. Please do subscribe as really helps.

[@curtis9202]

@ratemygadgets5340 Hi, i saw a lot of videos you put to youtube. Nice Work! My ecobubble's buttons arent responding. Just the dial, start/stop an power buttons are working. The machine also stops mid cycle sometimes. I will resolder the controll board because of the sudden stops, but what could i do with the buttons? Have you ever experienced similar? (I hope that controll board resolder will help on that also) I already checked all the cables, and the boards. The wires are ok, no burnt components on the pcb... Do you have any advice? Thx! Have a nice day

[@ratemygadgets]

Not experienced the same but some others on here may have. All you can do is check the connections or it may be the buttons are no longer working BUT if all.those buttons, then has to be the whole module or connections. Of course, if in doubt can do it safely, then please seek a professional service engineer. Hope it helps. Please do like the video and subscribe as really helps me

[@curtis9202]

@@ratemygadgets Will do, thank you for your answer!

[@esmemajor6834]

Hello, I don't understand what you did there - did you just remove it and then put it back in?

[@ratemygadgets]

Yes. If need to replace heater then obviously take old one out and put new one in. If however, which can happen, you have a blockage then a loose item of clothing may find its way there so remove it. Hope helps. Please do like video and subscribe as really helps.

[@aneessawah1985]

Plz what the error AE6

[@keepmovn8039]

Hi, my main goal is to disable the heater, but still uses the washer normally (w/o the heater). Is there a trick to do it?

[@ratemygadgets]

Hmmmm. Not easy and not sure why you would want to but I would guess that setting a cold wash will disable the heater. Please do seek advice from a qualified washing machine engineer if in doubt or further help.

[@keepmovn8039]

@@ratemygadgets im living off-grid and electricity is limited. Especially using the heater which requires beyond my current installation. I need to use the eco drum clean mode, and it wont let you turn off the heater. I just found out a way for the washer to bypass the heater function, and manually pour in hot water instead. Happy to finally use the eco drum clean without burning any fuse. Thanks for the reply.

[@xhovanakulaj1742]

I tried to remove the heater but it doesn't work. Is there any other way?

[@ratemygadgets]

Is it the heater that is at fault? If so, sounds like a control board issue not telling it to heat up

[@ramsonalang2312]

May problem is show "hot" in display screen

[@ratemygadgets]

Hmmm. Not seen that. Does it do the same regardless of wash? Put it on a cold wash