How to fix Thrustmaster squeaky pedals

Thrustmaster squeaking pedals are common issue. Take a look how to fix this problem and enjoy silent gaming.
Music: Accra
Musician: Jeff Kaale

[@Icza]

That beginning got me laughing, I exactly found your video due to my wife tapping me on the shoulder while I'm racing in VR and was not too pleased with the squeaking sound whilst trying to sleep. Thanks for the vid. I have some Wahl clipper oil that I hope will do the trick.

[@r4mz1motors34]

Glad you enjoyed it!

[@tigger8326]

Thank you so much sir,i just noticed i had this problem when i was just sitting on my rig pressing the pedals for fun and found out i had this problem as well .looks like this is just what i need🙏

[@r4mz1motors34]

Glad it helped

[@iyevice849]

Thanks, man! Got the same issue after over a year of sim driving around. T150 Pro with T3PA pedals. Gas squeaking. Removed the panel but didn't disconnect the wire, just put a few drops of machine oil in those squeaky places & problem solved. Funny, but after reassembling & checking with TM Control Panel, everything works, but without that annoying sound).

[@r4mz1motors34]

Glad it helped

[@lonelydrifterjz349]

very helpful I need to do this soon, have the exact same problem i thought it was the spring giving out

[@arvins.7064]

Thank you! Just did this and it made the experience so much better

[@r4mz1motors34]

Wonderful!

[@apecx1359]

Which type of oil did you use?

[@Jvst0nTime]

Thank you so much sir ! I have my gas pedal shaking left and right (wiggle) like it feels a lil loose, is there a fix for that ?

[@titostacos114]

i did this but i used keyboard switch lube since its thicker so it should last a lot longer also for the springs which were squeaky i put wd40 but that might not be a permanent fix since i did notice a build up of hair on the top so you might reapply when needed i will update with any new sounds or issues if there are any

[@eepy04]

worked perfectly! thanks!

[@Jazril]

Dont forget the screw behind the power cable which R4MZ1 also shows

[@Bieffe]

What are the tools required? Just a #2 cross head driver?

[@bytx]

Worked really well thank you

[@r4mz1motors34]

Your welcome 🥳

[@dorianpok007]

Very helpful. THANKS.

[@r4mz1motors34]

Glad it was helpful!

[@marswong6728]

Nice! Thank you very much for this vid!

[@r4mz1motors34]

Your welcome. I hope it helped. 🙂

[@Operator_Fate]

you really dont have to open the pedals, i had this problem and i sprayed WD-40 on the clutch hole on the pedals from the outside, and the squeaks instantly gone

[@zachburger7126]

Well I hope this works guna try it

[@jeantaffie]

did it end up working?@@zachburger7126

[@Bieffe]

But is the accelerator that's giving the sound?

[@stefanukic8988]

​@@Bieffe Then put it on gas pedal

[@187Gameplan]

How did you get on?​@@zachburger7126

[@Dwightschrute6669]

Thanks so much!

[@r1s1112]

absolute legend, ty

[@Zairn12345]

Thanks for this. Doing this now as mine are horrendously loud... like WAY worse than this.

[@SquadronLeadr]

Mine too... horrible. Did it sort it?

[@Zairn12345]

@@SquadronLeadr I believe so, been awhile since I did it and I’ve got new pedals now! :). But I think it fixed it yeah. :)

[@user-wq1nc1ep5k]

Thank you very much!

[@evin1035]

works on logitech g29?

[@GLaDOSthelegend]

what kind of oil/grease are you using? i wouldnt want to break my pedals by applying the wrong stuff.

[@bompi3572]

you can use wd40

[@spline5243]

@@bompi3572 make sure its the electric contact cleaner version

[@skyline2601]

Thanks for the tutorial, I did the same, however after I put them back I noticed the pedals only go to about 80%. Any idea what I could have done wrong?

[@W1nkey_]

Did you find a fix?

[@skyline2601]

@@W1nkey_ I know it's very late, but if anyone sees this comment and has the same problem: I accidentally set my wheel settings to work with a different type of pedals, a setting that wasn't compatible with my set. You have to hold a combination of buttons on the wheel, which you will find in your manual, to fix this. If you look through the manual you will understand. In short, the wheel was set to detect a set of pedals that worked on load cells, instead of being set for hall sensor pedals.

[@davezizka]

is WD40 good to use?

[@isolmusstanken]

thank you so much man !!!! 😁😁

[@r4mz1motors34]

I hope that helped you to fix your pedals 😀

[@ariac4080]

I will try this now thanks!

[@r4mz1motors34]

Did it work?

[@ariac4080]

@@r4mz1motors34 Yes and I used a swedish lubricant and it's so much more fun now.

[@tomcook725]

This was very helpful and informative. Thank you.

[@HPsawus]

Thank you 👍

[@r4mz1motors34]

You are welcome

[@ghostystudios]

Absolute life safer, legandary

[@fadoobaba]

What oil is this?

[@Tomas_PL]

WD-40 would work as well

[@samuelspearman2478]

Which oil?

[@nic7787]

he used cooking oil

[@enoksanne350]

Thank you! Tried this with olive oil, and worked like a charm!

[@r4mz1motors34]

Great job!

[@axelxan]

Keep in mind that natural oils degrade plastic.

[@skyline2601]

I wouldn't do that. Pretty sure it can go rancid and in some time it will smell.

[@timvierhout5739]

Can i use WD-40 for this?

[@yourneighborhoodredneck6321]

Should be able to, I have some silicone based wd40 I’m gonna use, just don’t wanna mess up the electronics

[@mitchellh4028]

I've done this twice already and the squeak ends up coming back eventually 🤣 damn things need a rebuild every two to three weeks

[@stevelinks2521]

How many relationships has this man saved 😮

[@randomgamingchannel7947]

I use a cheap stering wheel but this helped

[@r4mz1motors34]

Good to hear 🥳

[@kinconcon]

What liquid were you using?

[@r4mz1motors34]

I have used cooking oil, not the best option but I have fixed with what I had.

[@nojusboyka1]

Work but always doing noises again and again

[@r4mz1motors34]

Try to use something like machine lube, bike lube or any other type of lubricant.

[@thatcornfedrx8guy372]

Used my car transmission oil for this works well 😂

[@Suraniset]

Was thinking about using some 5w30 I have here lol.

[@nic7787]

Thank you!!

[@r4mz1motors34]

You're welcome!

[@rio_ramadan]

What oil did you use?