How to Fix Timber to Brickwork - Fencing and Gates

This is me putting up some fencing that relied totally on getting a good fixing between the new fencing post and brickwork. This method can be applied to fencing, gates, door frames or any other timber fixing where a really strong and durable connection is required.
Proper DIY Patreon Page: / properdiy
🧰 The tools and equipment I use: www.amazon.co.uk/shop/properdiy
Amazon links to tools and products used in this video...
► Laser Level: amzn.to/3skCeQm
► Concrete Screws: amzn.to/3c7ugWd
► Dewalt Impact Driver: amzn.to/30WWgVN
► Dewalt Drill: amzn.to/30YFVzZ
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases.

[@YoYoZamolo]

The problem with this video is that it is so good, you’ve convinced me I can do my own fence, but I know from experience watching you makes it look easy, actually doing it is another story 🤣

[@projectgaming3364]

QUICK TIP: Drill your holes before you cut the angle... that way they'll definitely be 90 degrees to the brick when fixed! Quality video as usual. 👍

[@pepperhill]

Fantastic tip. Thank you

[@MohitKaura]

Could you explain this a bit more? I am trying to do a fence gate, so this might save me time.

[@jimporter]

Remembering that the countersink should not be based on the size of the bolt head but the size of the socket you’re going to use to fix it.

[@guysolis5843]

True dat..

[@craigprosser9554]

@@guysolis5843 it is no need to ask how I know😂

[@bowenflob8036]

Remembering that it's a counterbore not countersink as that would imply chamfering the through hole, not drilling a blind bore as he did

[@YAWN....]

Ok Dad...

[@bowenflob8036]

@@YAWN.... Pleasure

[@Shadman1603]

Great job! Used these bolts to fix my timber to the wall yesterday when I put a gate up. Never heard of them before but they fixed really solid.

[@RandomnessTube.]

I watched this in full and enjoyed it I must be getting old.

[@ProperDIY]

I know the feeling!

[@NeverWokeNotASoiBoy]

By old i think you mean wise?!

[@raminybhatti5740]

😁👌

[@veganpotterthevegan]

Yup, how-to's for things we're never going to do. I don't have a single brick on my house but I'm here 🙃

[@jatflash]

Well mannered presentation, good instruction and no fluff. Well done.

[@ProperDIY]

Thank you

[@goblin7837]

Well said mate!

[@BUREAUTOM]

Great video. Top marks on the way you explained how to trim the post. A difficult thing to explain. You did it very well - the advice was very clear and easy to follow.

[@user-iw5lz2gc3q]

This concrete screws idea will solve my current problem of an existing post has come loose from what looked like thin screws into rawlplugs into house brickwork. The whole fence is unstable at the house end and raking it apart is not in my capability or strength. I can drill through the wood post in situ though and put those heavy duty concrete screws in. Grateful for this video!

[@susanhillier5635]

Having watched you build the garden planter, you took this to another level. First class job, it makes a difference having all the tools but you certainly know what you are doing..........keep it up 👍

[@ProperDIY]

Thank you

[@hugowilliams4999]

This video is very helpful, wonder why I didn't search before. I love the step by step explanation, great. I am a DIY er and this adds to improving my abilities. Looking forward to watching more.

[@jeffthomas9517]

Good advice Jim, 👍I've done similar but used Dyna bolts to attach the timber to the brickwork, but your method is neater. Cheers Jeff.

[@Clicknick007]

Great video. Have done much of this over the years. I have drilled slightly smaller holes in the brickwork for concrete bolts to ensure. 10mm bolts, 10mm hole in post, 8mm holes in block/brickwork. I also drill and loosely fix bolts one at a time starting at the top, so you don't have problems if there is any movement.

[@NAFO_Badger_Brigade]

Always clear! Greatest handyman teacher on the web! Love those fixings - seem so much better than the hammer in type which I've never been happy with!

[@ProperDIY]

Wow, thanks!

[@taters-no4gj]

Going to be doing a gate and a little bit of fencing. I was worried about the screws I'd use, or if I needed to use rawplugs, etc, and whether to drill into the mortar or brick. All questions answered and all concerns set aside. Excellent vid. Many thanks 👍🏻

[@GaryAppledale]

This was a revelation. I was waiting for you to drill a hole large enough for a big old plastic rawlplug and you just screwed the bolt straight into the brick! I just never knew you could do that.

[@ProperDIY]

I know! looks like rawlplugs are old fashioned now!

[@james-jq8sk]

Depends on the type of brick, sometimes they just don't work...

[@stevegeek]

Exactly what I was expecting to see. I'll have to look out for some of these concrete screws when I replace my gate post.

[@karamathussain406]

Great advice always nice to watch these kind of videos they help you do the job only once rather than wastage. Thank you and please keep them coming.

[@ProperDIY]

Thanks, will do!

[@markbarlow4918]

8:24 onwards for a couple of seconds.... shut your eyes and just listen!!! 😂🤣😂🤣 Brilliant video, really informative and well put together!

[@ProperDIY]

Glad you enjoyed it!

[@garulusglandarius6126]

Love your work Stuart, I’ve watched every video and your attention to detail how AND why is so useful. My only complaint, more videos please I’m getting withdrawal symptoms 😂👍

[@stevebeal73]

I had a similar issue a few years ago, but wanted to fit a gate. I didn't bevel the fence posts though - I simply fitted the hinges to the flush fence posts in the normal way and let the hinges absorb the angle. Worked well and looked good!

[@zgasnola]

Really impressive job. I was just looking for tips on fixing gate posts to the wall, but really liked the fence and all the handy tips. Thank you.

[@ProperDIY]

Thanks. Just assume the fence post is a gate post!

[@mrmrjims3865]

Justin Timberlake would be proud

[@DjGiluk]

I’ve been watching your videos the last few days to get some ideas - they are great so thank you. Keep up the good work and I love the humour 👏🏻👏🏻

[@ProperDIY]

Glad you like them! Will do

[@LeighWinspear]

Great video and good advice. 9:07, no need for pilot holes if you use a cutter design, of outdoor quality screw such as reisser. But as usual you will pay more for the convenience and time saving.......;)

[@swisstony6069]

Really enjoyed the vid. Professionally done with no faffing around, well done. I’ll be checking your other vids.

[@ProperDIY]

Thank you Swiss Tony! Lots more to come.

[@chrisdowning7543]

Hi Stewart, thanks for your kind reply. All done now, you were totally right about the intense bitting in the wall!! It fixes extremely well indeed. Much much better that old fashioned rawl plugs! Thank you!

[@ProperDIY]

Excellent! I'm so glad it went well.

[@francefradet2116]

This is like a City and Guilds workshop lesson. Wow. Thanks.

[@robjenkins9450]

Everything about this procedure is spot on and very well explained. I've just used a similar method to fix a 100mm square gate post. For those with particularly brittle bricks or London's with the large frog, I'd suggest using 10mm allthread and chemical fixing adhesive such as Kem II. Recessing the timber holes is done in the same way, allowing for a nut and washer. Remember to check your thread lengths so they don't fall short to apply the nut and washer. For those keen on a fine finish can always plug the holes once complete.

[@MattTaylor-uj3ye]

A spade bit produces a counter bore. A countersink is typically 45 degree taper for countersink screws. Yes a good informative video.

[@tasercs]

1st of your videos I have watched. Not sure I have seen a more concise, well paced, well edited DIY video as yet. Also excellent camerawork and audio (including sensible use of music instead of a constant bed fighting with the presenter). I'm really looking forward to watching loads more. :)

[@debbiefinch7445]

WOW! Once you mentioned bevelling the post i nearly tuned off - far too complicated for me I thought - but you simplified working out the angle so well that even an idiot like myself can work it (not that i need to because my wall and fence are parallel to each other!) The only other element I found not very DIY basic was the laser thingie - not got a one of those and don't want to waste money on a piece of equipment just to attach 3 posts. Had tuned in mainly to see what you used and was pleasantly surprised to see no raw plug required. Years of doing my own DIY from laying patios, house renovations, electrics, plumbing - i have never plucked up the courage to drill into brick!! Flippin' simple following your video!!Thanks alot!! x

[@judithwoods1576]

I'm doing a similar job and I found your video very helpful. Thanks

[@raydebbiemcdonald3208]

Nice job. Love the detail of scribing then end board. A proper job! 😊

[@ProperDIY]

Glad you liked it!

[@garybowles8340]

Really enjoyed watching this one! Very good way of showing how to make a template for the angle to cut. 👏👏👏

[@ProperDIY]

Thank you

[@markmiller6402]

Great video, very professional mate.I too was shocked at how much those concrete screws gripped.

[@ProperDIY]

Thanks

[@jixuscrixus1967]

Subscribed, good presentation, straight talking, clear instruction/advise and an easy manner.

[@ProperDIY]

Thank you.

[@gonzo3915]

I use these floor bolts for all my wood to Stone fixings, great things.

[@Liveyourlifewithafatcigar]

I have no need or have any intention to do any fencing...... But i love to watch a crafts person doing a job well & explaining all the pitfalls.... Thank you for sharing 👍🏾

[@ProperDIY]

Thank you

[@somewhereelse3813]

This guys a legend. Are you local cos my wife's crap at DIY!

[@ProperDIY]

This is easily the best comment I've had so far!!! Very good!

[@TheWebtuts]

Spot on direction, like those bolts going to give them a go for double side gates posts. 👌

[@edwardwilson4974]

Really good stuff, and quite inspiring seeing such good work. Thank you!

[@ProperDIY]

Glad you enjoyed it!

[@derekcomer4858]

Excellent work, loving the attention to detail 👍

[@ProperDIY]

Thank you very much!

[@user-oe9xe8mv6t]

I've been a fan of Dynabolts for years but those anchor bolts have just changed my mind.

[@stefanieholt1300]

Thank you for such a great visual on the angles.

[@ProperDIY]

No problem

[@delfokronic]

If I could go back and do it all again, this is what I'd be learning. So satisfying.

[@HIK_48]

Excellent tips. I never think of using line but to mark where the Arris rails are over featherboard, it's the only way!

[@jeta1f35]

Cracking video, all bases covered, plain speaking, very well edited, spot on !

[@ProperDIY]

Much appreciated

[@craigbuckley4832]

Very impressed by how it's turned out,. Very good video 👍 well done

[@stevenbarratt7409]

Fantastic. your work is immaculate. thanks for sharing.

[@thetruthz13]

No idea how I ended up here. I'm not even putting my own fence up. But I had to see the finished article. Looks great! And very informative. Good job. 👍

[@ProperDIY]

Glad you enjoyed it!

[@selffarming7008]

Great video, well explained, like the solution to the angle on garage wall. Another top job fella 👍

[@andyr4735]

Literally thousands of videos on KZbin and this video is recommended everyday.

[@dantovey2785]

Lovely job. Those concrete screw fixings are brilliant

[@ProperDIY]

Thank you

[@Brian-om2hh]

I'd agree. I used them to fit a canopy over my back door... Worked a treat.

[@Gank-SquadUK]

Thank you for providing such excellent material

[@jahedul.H]

My first time watching your videos and in the first 5 minutes I instantly subscribed. Great video mate

[@ProperDIY]

Thank you - very much appreciated

[@rickydub6950]

Same here 😁

[@barrybladesbb]

Top job as per usual .. great work

[@viper7869]

At last somebody who knows what they are talking about! Good tips good advice!

[@ProperDIY]

Very much appreciated!

[@adamstone4905]

In regards to the post fixing 100% the fencing on the other hand is not correct bottom rail to low, using screws instead of 50mm galv nails and no gravel board support in the middle good effort nevertheless (I’m a fencer)

[@stevehall6299]

Top marks for PPE use!

[@jtbkilmartin9110]

Awesome advice. Thanks a million. Ive done some fencing before but there are a load of good tips from you. Nice one.

[@ProperDIY]

Thank you

[@MarkJT1000]

This is why a professional job sometimes costs more than you'd expect. It takes a lot more time and effort to do the job properly. I used rawl plugs and large 10mm screws when I fixed my post to the wall. It seems secure enough.

[@ProperDIY]

Correct

[@GrahamDIY]

Just found your channel. Looks good. Personally, and we all have our different ways, I have learnt over the years to always resin when affixing to brick/concrete. Yes, concrete screws can be very strong, but resin is fit and forget. Nice to see a fellow 🇬🇧 doing stuff like this on KZbin 👍👏

[@ProperDIY]

Thanks! I agree resin is absolutely the best fixing into a wall like this. In my day job I have used construct resin like Hilti Hit' which will fix anything. The negative side is it's permanent and not cheap. The average DIY'er will not be inclined to use resin.

[@polderfamily442]

@@ProperDIY Hello Stuart. Also very impressed with the concrete anchors into the brick. Are you able to tell us the manufacturer and name of the product? Would like to see if they’re available in the US. Love the videos!

[@locien182]

love your shows. really well-thought-out and planned work. keep it up!

[@ProperDIY]

Glad you like them!

[@saajanji1674]

Brilliant no long winded story telling, few ground rules and off we go. We'll done

[@ProperDIY]

Thank you!

[@PBz420]

Thanks for the great insight and step by step guidance on the fencing!

[@ProperDIY]

Thank you

[@slodown3670]

Excellent, clear demonstration.

[@harrybobs4014]

Always tended to use the shield anchor bolts but they look a tad outdated. Will be giving these concrete screws a try now they look ace. Good job 👌🏼

[@ProperDIY]

Me too and they now seem a bit old fashioned!

[@sim-1296]

Great video! Keep up the good work. I wasn’t sure about concrete screws as they are new to me, but after watching your video I’m convinced that they’re really good. I’m going to use these when fixing A New Post to My house wall. Many Thanks. 👍🙂

[@ProperDIY]

Thanks! They are relatively new to me as well however they are really popular now and I've not had any fail yet.

[@sim-1296]

@@ProperDIY That’s really good to hear & Thanks for your reply. Watching your video has given me the confidence to use these fixings now. Your video explains everything. Thanks again..Regards, Simon

[@chrisfirth461]

Great video thanks, I learned quite a bit from that. Could I suggest that you cut a hole at the bottom of your fences to allow hedgehogs access? Lack of hedgehog highways is one of the reasons they are in decline.

[@AJ-qn6gd]

Vital tip 👍🏻, we have hedgehog holes in front back and side fences and we regularly have hedgehogs in the garden sometimes they even hibernate in our hedgehog houses 😀🇬🇧

[@chrisfirth461]

@@AJ-qn6gd Excellent, thank you for that, they need all the help they can get.

[@ProperDIY]

Good point - a job for me tomorrow.

[@AJ-qn6gd]

@@ProperDIY,Top man 👍🏻🇬🇧

[@kezcracknell]

Brilliant video, Bravo. Makes it look easy but also gives me the confidence to do it myself. Thank you.

[@ProperDIY]

Thank you

[@krstolaganin2495]

@@ProperDIY mk

[@krstolaganin2495]

@@ProperDIY k

[@olenaerhardt7725]

Really appreciate this film. I need to replace rotten pieces of Door Jambs on our garage door, watched several films and was about to do an easy project, but then realized that all the films I saw before were about attaching that Door Jamb to the wood, and we have brick house, with the Door Jamb attached to the brick. The project turns to be from easy to not so easy, but I can proceed after this film. Thank you!

[@ProperDIY]

No problem - I'me glad you liked it and found it useful

[@olenaerhardt7725]

@@ProperDIY I have another a question here: can I actually use the original holes and concrete screws? I will cut like 24 in from the bottom of the Door Jamb and replace it with a new piece of wood. Or I need to make an attachment in another place? In other words if you unscrew that concrete screw, can you screw it back, or it is like an ancor in some sense, and it is better not to reuse it? Thank you again.

[@ProperDIY]

@@olenaerhardt7725 Yes you can reuse them and the holes. Just ensure that when you tighten them fully they hold well - this sort of depends on how hard the brick/block is. If it's normal brick it will be fine.

[@olenaerhardt7725]

@@ProperDIY I see. Thank you very much.

[@welditmick]

Nice neat job - Excellent step by step guide and no bull.

[@ProperDIY]

Thank you.

[@SB-cd9vo]

Brilliant. Some great tips there. Is anyone else screaming 'gate! - make an access gate!!'....no, just me?

[@theparson4944]

Good quality job. Excellently presented.

[@ProperDIY]

Thank you very much!

[@cbaker1249]

Absolutely brilliant, real professional, well explained, and suitably informative and inspiring enough for me to do mine! well done!

[@ProperDIY]

Thank you very much

[@vladimirimp]

I really enjoyed this video, now subscribing. I like your presentation style - very informative.

[@ProperDIY]

Thank you.

[@dogbreath6974]

Another great video Stuart. Not sure if you have one but, you could do with a drill press, it would make it easier for drilling 90 degree holes.

[@stephenpascoe1148]

Fantastic job...great footage...well done !!

[@ProperDIY]

Glad you enjoyed it

[@gegounaris]

Amazing job! One of the best diy channels...

[@ProperDIY]

Well thank you very much - very kind of you. You may be interested in my other channel - Proper Dubai - try this one... kzbin.info/www/bejne/nKXTgGptfttqf5I

[@tonyefc8423]

Very like myself. Some 'belt and braces' stuff, but that's good. As a joiner who's had to retire through illness, i find your videos informative and interesting.

[@ProperDIY]

Well thank you very much.

[@Cookie2k]

Just found your channel. Great content and descriptions in a nice clear way. Now subbed and looking forward to seeing more content.

[@ProperDIY]

Thank you. Lots more in the pipeline.

[@Bthaman69]

Omg thank you. I literally have the same project with the same geometry. You're #1

[@Lord-Panda2112]

You are really natural in front of the camera. I'm surprised you aren't on a professional show. You have good charisma are well informed and entertaining. Impressive.

[@ProperDIY]

Thank you so much 🤗I haven't been offered any show but I do have my own channel with no one telling me what to do so good enough for me!

[@Lord-Panda2112]

@@ProperDIY Fair enough!

[@davidpriest5253]

Nice video and a great finish to the work. Thanks for posting.

[@ProperDIY]

Thank you

[@rayturvey3826]

Good sound advice and no bullshit. I have a similar project with an angled wall I did intend to use plastic wedges between wall and post. but after watching your vid, I think I`ll cut an angle on the back face with my circular saw.

[@ProperDIY]

Thank you. Good luck!

[@jamespearce40]

Really enjoyed this, explained in good detail I could understand. Keep the videos coming.

[@ProperDIY]

Thank you

[@Chequr_Prostate]

Great video, my only concern would be the bridging of the damp course.

[@robplazzman6049]

Impressed by those bolts gripping hold !

[@ProperDIY]

Me too. If the brick is strong the fix is solid

[@jamesst16]

Nice video, used these fixings to hang a gate post on my brick wall. Top tip = spray the hole through the wood and the brick with some wd40 before putting the fixing in. Saves that nasty squealing and makes them easier to do up.

[@liberifatali666]

Ahh this is excellent! Exactly what I been looking for. Complete DIY noob here, had a pop at hanging a gate off the concreate post after (eventually) ripping out the ol' rotten one... After about 6 hours and a lot of swearing as my spindly little bolts kept snapping I came to learn the error of my ways. this video should do me justice, I feel much more comfortable tackling this., I'll let you know how it went:P Again, thanks a lot

[@donohoe71]

Why have I not found you earlier! Excellent video, I'm crap at DIY but you take it step by step and explain everything without it becoming boring. Really pleased I've found you. Thanks mate, keep up the good work

[@ProperDIY]

Thank you and Welcome aboard! Only been going since Jan so still very new to everyone!

[@2icelollys1goat]

Thank you. Really well produced video tuition. And I liked your humour🙂

[@ProperDIY]

Glad you enjoyed it!

[@007butty]

Excellent job enjoyed watching and learning from that 👍

[@ProperDIY]

Glad you enjoyed it

[@alimakda1706]

You're a legend thank you for the great tips keep teaching us mature folks

[@mancavemusician]

I love the quality and attention to detail.

[@ProperDIY]

Thank you

[@ruaraidhmcdonald-walker9524]

Brilliant!! Great video, no messing, lots of great tips. Thank you!

[@ProperDIY]

Glad you enjoyed it!

[@ruaraidhmcdonald-walker9524]

@@ProperDIY Never heard of those bolts before, really impressive holding power. What were those upper and lower poles called you screwed the panels too? Those angle brackets for those to the posts were great. All available at Screwfix I'm guessing?

[@ProperDIY]

They are called Arris rails - I got the Arris rail brackets at Screwfix

[@charlesarnold4963]

I found that extremely interesting and useful. Would you consider showing how to fix a post to and irregular brick wall please? By irregular I mean a brick wall that is not straight up and down.

[@joneades2493]

Great to see you using your safety gear!

[@ProperDIY]

Always have to else I'll get told off by the Safety Manager!

[@Ilimar1]

Great video, but I wondered the entire time If a fence that would open wouldn’t have been a better item to put on that side of the house. Now you have to walk all around the building to get to the other side.

[@Thursdaym2]

That's great and also shows you need the right gear for a good job.

[@ProperDIY]

Absolutely!

[@theCybershot123]

Going to fit some decking those fixings are on my list. great video

[@ProperDIY]

Thanks

[@patrickshea1972]

Well explained.. very professional. Thank you

[@ProperDIY]

Thank you

[@alejandrocastillo-garcia5418]

Thanks Peter :D

[@sreval]

Great standard of work 👍

[@ProperDIY]

Many many thanks