Рет қаралды 864,747
If your keyboard or any of its keys do not seem to be working, this video will help you troubleshoot why, and learn how to fix it. If your key 'FEELS' like its working fine and you want to try the system fixes, you can jump to 3:59 where that part starts. If, after all these steps, you cannot fix your issue, and reseating the keyboard didnt work, consider replacing your keyboard. Check out the FAQ's and Related Video Links below !!
Please remember to Like, Share, and Sub if this video was helpful :)
To Donate, feel free to leave a Super Thanks by clicking on the Heart Button under the video.
Related Video Links:
Get Great Games at Humble Bundle: www.humblebundle.com/?partner...
For Tools, Supplies and Computer Components Suggestions, visit: www.amazon.com/shop/pcmonkey
FAQ's
Q: My keyboard is not working enough to follow these steps. What can I do?
A: If your keyboard is not working enough to follow these steps, then try using an external keyboard. They will usually plug into a USB port and should allow you to perform these troubleshooting steps. You can also try reseating the keyboard ribbon cable to see if that helps.
Q: My Key Cap will not click down in place correctly. Whats wrong?
A: If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Q: The Retainer Clip / Hinge Clip is not staying down on the Keyboard.
A: The retainer clip should be attaching to both the key cap and to the keyboard. If its not attaching to the keyboard correctly its because the keyboard pins are bent out of place, the retainer clip is damaged, or the retainer clip is not orientated correctly. If you cant figure it out by just looking at the clip with is hard to do sometimes, remove another key cap and compare the correctly installed retainer clip to yours.
Q: The Hinge Clips came off with the Key Cap. What do I do?
A: Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
Q: Where can I purchase replacement keys?
A: If any component of the key assembly is broken, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Q: I have a Key or Keys that are not working. Will this fix them?
A: This video is a tutorial on how to replace a key. If your keys are not working but are not mechanically broken, troubleshoot them as seen here; • How To Fix Troubleshoo... .
Q: The hinge clip came apart into two pieces. How can I reassemble?
A: They fit together with a small plastic pin on the left and right of the inner clip. These fit into holes on the outer clip. To see exactly how the inner clip sits in the outer clip, remove another key cap and copy the clip under it.
Q: The rubber spring came off. How do I reattach it?
A: There isn't really a good way to reattach those. They are not meant to be replaced. Best advice is try to use a small amount of glue. If that does not work, you may have to replace the keyboard.
Viewers also reported the following issues;
- A keybind on a program was binded to a key.