None of the suggested "solutions" actually apply the "no media" error. 1) If the USB key itself is properly detected, but its internal storage is missing, switching to another USB port won't help. 2) You can't scan the drive for errors if there's no drive to scan in the first place. 3) If you can see the "no media" error, the USB device is enabled already, obviously. 4) You can't change the drive letter of a missing drive, obviously. 5) You can't check a filesystem on a missing drive, obviously.
@MZU777 Жыл бұрын
Totally agree. When there is a physical problem none of these methods works. This video is useless. Actually, when the USB drive has physical problems (bad sector, controller issues) there are no public software solutions to fix or repair them somehow. IF you are lucky to save your data, in 90% of the cases that is the best you can achieve. You have less than 10% chance to save your USB drive. 1. The problem starts right at the Windows itself. When Windows have problems handling the problematic drive properly, it means its built-in internal fault handling solutions are already screwed and there is a high chance they will not work. So if this is the case, NONE of any method proposed to use windows built-in testing and repairing functions will work. 2. Many so-called "repairing software" are just a scam. They just want your money. They have nice look, and a pretty display, BUT they are actually not real software. I mean they are but all the programmer did is this nice display screen, but behind the curtain the software itself does nothing just tries to run some windows internal software like checkdisk. THE REAL applications are using third-party methods collecting information about the faulty drive and using their own methods to fix it. Recoverit unfortunately not belongs to the real ones. 3. If you wanna save your data, first you have to read a lot, second try different softwares to test the bad USB drive and learn which one gives you EXTRA info above you already know from windows error messages. Third: If you find one, that really gives you something different, something new info compared to the "shitty ones". USE THAT one, to repair your drive and get back your data. There are even some free ones too those are really works. (I cannot write names here for obvious reasons.)
@Spaethon Жыл бұрын
Yep same boat here
@blimeycrikey Жыл бұрын
It's a sales video.
@ChozoSR388 Жыл бұрын
@@MZU777 Sometimes, like in my case with a no media error, an OS like Linux is still able to access the drive. I'm still trying to figure out how to use Linux to make the drive accessible under Windows with Linux, though...
@ervinnikolli240 Жыл бұрын
Thank you for saying it. This video is such a waste of time.
@olegdepapa Жыл бұрын
Solved: I threw my USB in the trash
@exploreendlessislam6 ай бұрын
😂😂
@jegres88013 ай бұрын
I am about to do but first to finishes watching this video
@leonelrobertomatavele78972 ай бұрын
it's easy when you have a 2GB flash disk, I have a 128GB, it's kinda difficult
@Yadu2 жыл бұрын
If it says no media, 1. chkdsk won't work (because windows can't access the disk) 2. the step two also won't work (same as above, because windows can't access the disk) 3. chkdsk won't scan for viruses or malware - total misinformation this video is totally useless and a lead up to upselling recovery software
@sardaar_sanveer_singh4 ай бұрын
same problem with me. how did you solve it??
@Yadu4 ай бұрын
@@sardaar_sanveer_singh Did not solve it :( lost all my data on that disk. I had a Sandisk Extreme Portable 1TB. I tried to get it replaced, but they local company that handled customer support didn't even give me a replacement.
@kalo5464 ай бұрын
You can't @@sardaar_sanveer_singh
@TAG-3.02 ай бұрын
I Exactly have the same circumstance with the same problem on my 64 GB USB drive. I tried everything, that's the method of -Chkdsk on shell and cmd -Properties under volume of disk management -changing the drives letter -formatting(when I do that on a PB hev computer, it says I should insert the drive😂nonsense🤷🏽♂️) And most of the time, it replies with an error like 'it can't access the drive' and am like "What The Hell"😢
@user-lo9si5dx8t2 жыл бұрын
Recoverit is the most useless piece of software I have ever seen, not only it is extravagantly expensive, but it doesn't even do half of what ordinary free software does. It doesn't even detect the USB drive let alone being able to scan the damn thing, even windows detects the USB drive and allocates a letter to it, but unable to access it, the cheapest subscription for one year is no less than $70 they must be joking, I won't pay this amount in a million years, I would rather lose all the data than pay them for something tha doesn't even bloody work, talk about greed, so please stop promoting these scams,
@maximvanderhoeden2477 Жыл бұрын
about everything downloaded from the web with subscriptions is bloody hell expensive :) for example macro recorder and remouse. its a one-time purchase, but still not worth the money.
@mistersmith489 Жыл бұрын
Recoverit is best on HDDs, not solid state. Well worth the money to get the memories back, ran a drive through it and recovered pictures i deleted two girlfriends and a wife ago or roughly about 17 years. Nothing like getting hit by a bus strolling down Memory lane.
@MZU777 Жыл бұрын
I agree. When I was in trouble, I tried many software applications. This recoverIT was one of the worst.
@DucklatchProductions2 жыл бұрын
#5 is telling me "Cannot open volume for direct access." and the drive is not showing up in Recoverit
@JMF2 Жыл бұрын
Same
@issamlfc92 Жыл бұрын
hey mate i have the same issue as yours did you manage to recover your pen drive ?
@madpriest7822 Жыл бұрын
Did you ever figure this out
@maximvanderhoeden2477 Жыл бұрын
exactly. I suggest looking for other ways than this app or #5
@flaminhot3833 Жыл бұрын
Same
@rijasnm98412 жыл бұрын
5:11 worked for me🙂
@vurrxle2 жыл бұрын
lol
@maximvanderhoeden2477 Жыл бұрын
it is the best solution
@iDREAMonx33 ай бұрын
Unable to detect my USB drive period. So, not even able to be detected by the Wondershare Recoverit software either...
@RecoveritDataRecoverySoftware3 ай бұрын
Hi there, thank you for your question! Then its most likely an issue with the drive itself being damaged I would recommend trying to make sure the USB drive is clean and nothing is interfering with the connection and try it on a different device if that doesn't work it must be an issue with the drive itself and I would recommend purchasing a new USB drive.
@benjaminwaltermauss33492 жыл бұрын
For me, it I manage it to work by going to device manager > universal serial bus controller > (Select the USB) > right click > update driver > browser my computer for drivers > let me pick from a list of drivers avaliable on my computer > (select the only one avalible) > click next. It updated my driver and I formated my USB.
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@criznittle968 Жыл бұрын
Are you just changing the drive letter?
@maximvanderhoeden2477 Жыл бұрын
@@criznittle968 yes he is, but when i changed it, the drive did actually show
@AlphaOmega88810 ай бұрын
Yes its just a drive letter change and I followed the steps and it didn't work for me.
@jaeronkier87382 жыл бұрын
HELP ! My Sandisk cruzer is in exFat system type but its not showing on Android TV and Speaker devices. Can you help?
@mackjeremee2 жыл бұрын
Is this applicable on external HDD?
@HanifAliBaluch9 ай бұрын
Though this couldn't solve my problem but the video is informative.
@RecoveritDataRecoverySoftware8 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@cardinalnight38832 жыл бұрын
Unfortunately, didn't help me. None of the options helped.
@thomassantiago21692 жыл бұрын
My usb movies had an error in playing so i restarted my computer then all was okay. Is it really okay or do i need to do some checking and what kind of checking do i need to do?
@zimmejoc Жыл бұрын
Boooooooooo. The no media error means the drive is damaged and none of these software options can do a thing about it. disk manager allows me to change drive letter, but I cannot chkdsk it, it does not show in file explorer, all the USB busses are running just fine. Then at 5:26 it turns into an ad for a data recovery tool.
@xx_Firefox_xxАй бұрын
it's always the usb driver that looks like that
@sanyulye71202 жыл бұрын
first time here but i have liked you. thanx for the good illustrations. please keep me infromed
@Refaan Жыл бұрын
What the problem of my usb flash drive i pullout without ejecting and then I plugged in is not showing up on my computer ??
@RecoveritDataRecoverySoftware Жыл бұрын
Hi there, Thank you for your question. To fix a USB drive not showing up on your computer, please try restarting your computer or plugging it into a different USB port. Check Disk Management for the drive and assign a drive letter if needed. Hope it could help you.
@Ra-zor4 ай бұрын
If your drive shows up but showing no media inserted then Go to diskpart, select your flash drive and type detail disk, if you have Disk :id:00000000, status:no media inserted, Location path:UNAVAILABLE, this all adds up to your flash chip on the usb drive failed, nothings going to fix that. Dont bother watching this video as it does not cover the flash drive controller working but flash memory failed (you know, the actual thing you wanted!)- its a bin job for your drive im afraid.
@eggchin97213 жыл бұрын
Mine isn't even showing a drive letter just "there are no partition on this disk to show" It's not a USB though it's an old IDE hooked up to hard drive docking station USB. Is there a way for me to collect to files from the drive still?
@maximvanderhoeden2477 Жыл бұрын
if there is no partition, that means the drive has no code for software or storage knowledge. it might be dead.
@sandeepnishad-pq3gd3 жыл бұрын
sir, after recover video file successfully recovered but video is not play any solution
@kkbkfamily9 ай бұрын
Hello, my mycro sd con't work, help me please.
@RecoveritDataRecoverySoftware8 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@criznittle968 Жыл бұрын
My USB stick was functional until i tried deleting a large 20GB folder on it which it struggled to complete, then i attempted to eject afterwards. Something failed, and now the drive doesn't even show up in 'This PC' nor can it be formatted/partitioned in Disk Management. This USB drive has only been used a few times, i can't imagine it's completely failed already. None of these fixes have done anything for it. 1. Tried reconnecting on different ports and computers 2. Checking for system errors is useless when no media is reported and it's not even showing within This PC 3. Enabling/Disabling/Uninstalling and restarting didn't help 4. Changing the drive letter did absolutely nothing 5. CHKDSK can't check the disk if there's no media detected 6. AOMEI won't detect the drive at all, i assume no other apps can Is there some software that can fix whatever is stopping the drive from being recognized by anything? I'd like to reformat it, but that's not an option in Windows. Is it just dead after 2-3 uses? That's hard to believe, there must be some other fix for it. Perhaps there's another driver that would allow it to function since the "GENERIC USB FLASH DISK USB Device" driver isn't doing much.
@maximvanderhoeden2477 Жыл бұрын
I have the exact same problem. I think my USB is dead space, but you can check if yours isn't. open the command prompt as he told in the video (make sure you use administrator). Typ: diskpart then press enter. then wait a few seconds for the program to boot (agree to administrator requirement notifications if they pop up). then type list disk press enter, and select the disk that doesn't work by typing select disk (X) (x is the number found in the list). after that type detail disk and press enter. if the disk ID is 00000000 and there are no volumes detected your stick is basically dead space. if it doesn't say that I suggest doing a little google exploring adventure for software that can retrieve data or maybe fix the stick. my problem occurred when I tried to set a video on it. it took way longer than it should have. so I canceled it, the program crashed, so I closed it and *took the stick out*. then when I plugged it in it issued problems and I needed to format it. later I kinda hate myself for not doing that, however, I am not sure anymore if I did it after all. at some point I did something and after that the whole stick was dead. I searched online for answers and found someone with the exact problem and issued that the stick was overheating. then in the answers, I read the following: your stick has no medium and will never work. you might as well throw it away (or something like that). I hope I could somewhat help you with this.
@OmarAhmed-cm3mv Жыл бұрын
@@maximvanderhoeden2477 I spent so much time searching and trying with no hope. I performed the test you proposed and it turned out my USB drive is dead, it's dead and nothing can bring it back. I'll reuse its casing, though. Thanks, man.
@maximvanderhoeden2477 Жыл бұрын
@@OmarAhmed-cm3mv yeah, I’ve searched like the whole day for answers and the comment above was something I found online randomly out of the blue. To this day it is still laying on the same place as before. Really hating that I can’t bring It back, but I’m glad I could at least help somebody with this problem.
@bro223 Жыл бұрын
Did you eject USB drive safely? It's very important
@criznittle968 Жыл бұрын
ohhh, that's all i had to do @@bro223
@CaesarInVa2 жыл бұрын
Nope. USB Mass Storage doesn't appear in the list.
@lloydypantz13 жыл бұрын
Hi, I recently bought 2 new 1tb USB sticks. On my desktop windows 10 I use to download movies , music etc. Iv carried out the fat32 file , which went OK. But when I copy any movies across to the USB stick and then try to play them on my tv it comes up with error message file not supported r something n won't play . I no the movie does work as I tested it on a 64gb USB stick. So when I try to move the file/movie back to the 64gb stick it comes up with an error message saying it's curupt . It did use to move the movie across ok but when went to play r check the data in the movie there would be nothing. Can anyone help me please
@christianbayutas28569 ай бұрын
It works for other people didn't work on this tutorial buy another usb😅😅😅
@RecoveritDataRecoverySoftware8 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@obviousabsurdity31813 жыл бұрын
probably would have been better to actually fix a drive. all your examples you do are against a working drive
@MaxAlzadjali2 жыл бұрын
Try This steps. it Fix the problem for me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@madpriest7822 Жыл бұрын
@@MaxAlzadjali has this worked or anyone???????????
@Kiisi-os7yg10 ай бұрын
@@madpriest7822 not at all
@armandvanderwalt124411 ай бұрын
Everything what you spoke to about and talked about I tried everything. They don't work. It's still showing online media. I don't know how to fix the problem and I talk it's on there and I even have a program to recover and I cannot even show that
@bastianx87722 жыл бұрын
Great your content. But my problem is my USB drive doesn't appear at all. What should I do???
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@theboldguy.2 жыл бұрын
None of this stuff works it shows me errors to all of the steps .
@bastianx87722 жыл бұрын
@@MaxAlzadjali ok,thx a lot, appreciate it!!?
@brianmartin6296 Жыл бұрын
@@MaxAlzadjali didnt work unfortunately
@maximvanderhoeden2477 Жыл бұрын
@@brianmartin6296 try this but replace all volume with disk in the comment
@RaniRani-zt2tr2 жыл бұрын
DUDE I LITTERALLY HAVE THE SAME DRIVE YOU ARE HOLDING IN THE INTRO
@DyingReindeer25 күн бұрын
yea, none of your fixes actually fixed anything. and your overpriced wondershare scam does not even detect the drive...
@buraunii Жыл бұрын
For Command Prompt: What do I do if all I get is "Cannot open volume for direct access."?
@RecoveritDataRecoverySoftware Жыл бұрын
Hi there, thank you for your question! it indicates that the disk or volume you're trying to access is currently in use or has an ongoing process preventing direct access. To address this, close any programs or processes that might be accessing the disk, run Command Prompt as an administrator, or use the CHKDSK command with the /F parameter to attempt automatic error fixing. If the disk is still inaccessible, schedule CHKDSK to run on the next restart using the /F /R parameters.
@Kiisi-os7yg10 ай бұрын
I currently have this issue error too
@Kiisi-os7yg10 ай бұрын
How did you fix yours?
@buraunii10 ай бұрын
@@Kiisi-os7yg For my case, unfortunately, I was hoping this was a fix for my External SSD. Turns out, the thing was just straight up fried . i even took it to a tech repair shop, and even they confirmed it was dead. meaning I lost all my files and had to get a completely new SSD. Pro tip: ALWAYS (safely) unplug external SSDs when not in use. especially if the computer, it is connected to, is constantly running.
@johnt.39949 ай бұрын
Nope. None of your suggestions worked. I was using rufus-4.3 to make a bootable Linux flash drive. I don't remember what exactly happened but the program crashed leaving the flash drive as is.
@RecoveritDataRecoverySoftware9 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@enkvadrat_7 ай бұрын
try to use rufus again, there is somthing rufus can do that makes windows not recognize the drive
@gas48110 ай бұрын
I hate videos like this that are loaded with tips that just dont help
@RecoveritDataRecoverySoftware10 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@Spaethon Жыл бұрын
Didn't help. It shows in Disk Mgmt, but "no media". Tried on 2 separate PCs, internally & with external USB cable. It's a 3.5" WD HDD. I already returned one for another and same thing. Ready to give up for a refund and spend the extra 20 bucks for a small portable plug-in ready
@gregpain85416 ай бұрын
After typing in chkdsk and so on, Windows says 'Cannot open volume for direct access.'
@RecoveritDataRecoverySoftware6 ай бұрын
Hi there, thank you for your question! This error means that CHKDSK cannot access the disk you want to check because it is being used by another process or program. Disable any third-party services that may lock the partition, such as antivirus, disk monitor, or backup tools. Uninstall any third-party software that may interfere with CHKDSK, such as drive encryption, disk management, or partitioning tools. Run CHKDSK at boot time, before Windows loads. You can do this by opening Command Prompt as an administrator and typing chkdsk /x /f /r followed by the drive letter you want to check. Then, restart your computer and let CHKDSK run during the startup process.
@ayubstha378 Жыл бұрын
can you cover chipgenius method please
@vulnoryx3 жыл бұрын
I bought a USB today and I wanted to do sth. The one USB i plugged in, (and want to use) is supposed to be formated and than be made bootable, and a iso file written to it. Its a intenso ultraline with 128 GB storage. After that I wanted to replace the iso. Than it all went wrong. After a quick analyze, I was like...im screwed. It was plugged in, and it was switching between no media and online. for the chkdsk command it didnt do anything due to beeing raw. non partitioned. And its like switching fast and you cant do stuff like allocating space. While the USB is connected, it has a red light that indicated that is plugged in and it fliccers when something is written to it. I dont think I can give it back, and if I lie they can check the events. It didnt cost that much...like 20 Euro. But its my money (Im not alloved to work), and I dont want to waste money. (Im like having the worst things ever. 1 year after I got my laptop,somehow wifi was corrupted or sth, than after a reset the win licence was corrupted, after another reset a service wassnt working and couldnt change that, and now im here)
@maximvanderhoeden2477 Жыл бұрын
Sounds like bad times :’) I’ve made another comment on another guy where you can Check what the status is I’ll put that after this:
@maximvanderhoeden2477 Жыл бұрын
I have the exact same problem. I think my USB is dead space, but you can check if yours isn't. open the command prompt as he told in the video (make sure you use administrator). Typ: diskpart then press enter. then wait a few seconds for the program to boot (agree to administrator requirement notifications if they pop up). then type list disk press enter, and select the disk that doesn't work by typing select disk (X) (x is the number found in the list). after that type detail disk and press enter. if the disk ID is 00000000 and there are no volumes detected your stick is basically dead space. if it doesn't say that I suggest doing a little google exploring adventure for software that can retrieve data or maybe fix the stick. my problem occurred when I tried to set a video on it. it took way longer than it should have. so I canceled it, the program crashed, so I closed it and *took the stick out*. then when I plugged it in it issued problems and I needed to format it. later I kinda hate myself for not doing that, however, I am not sure anymore if I did it after all. at some point I did something and after that the whole stick was dead. I searched online for answers and found someone with the exact problem and issued that the stick was overheating. then in the answers, I read the following: your stick has no medium and will never work. you might as well throw it away (or something like that). I hope I could somewhat help you with this.
@vulnoryx Жыл бұрын
@@maximvanderhoeden2477 thanks for the info. I will look into it but its probably a lost cause like you said.
@mr.dougnut824011 ай бұрын
Hi, there. Can someone help? I formatted my exFAT removable flashdrive (that originally has 68 GBs in it) into the NTSF. After that, the file manager of the pc can no longer show my plugged-in flashdrive. I was able to have the file explorer to show it up again, but this time around, my removable flashdrive is greyed out. I checked in cmd, and I saw that my removable flashdrive has a status of "No Media" with a size of 0 byte, and I was like... where did my 68 GB go??? Can someone help me????
@RecoveritDataRecoverySoftware11 ай бұрын
Hi there, thank you for your question! To potentially recover your lost 68 GB of data, first, refrain from any further use of the flash drive to prevent data overwriting. Check Disk Management in Windows to see if it's recognized there, then attempt data recovery using software like Recoverit. You can also run the chkdsk command to fix file system errors. If these methods fail, consider formatting the drive again, but only as a last resort, as it will erase any remaining data. For critical data, professional data recovery services may be necessary.
@TAG-3.02 ай бұрын
I Exactly have the same circumstance with the same problem on my 64 GB USB drive. I tried everything, that's the method of -Chkdsk on shell and cmd -Properties under volume of disk management -changing the drives letter -formatting(when I do that on a PB hev computer, it says I should insert the drive😂nonsense🤷🏽♂️) And most of the time, it replies with an error like 'it can't access the drive' and am like "What The Hell"😢
@nameless349911 ай бұрын
The disk doesn't show for you to even recover it
@RecoveritDataRecoverySoftware10 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@nameless349910 ай бұрын
@@RecoveritDataRecoverySoftware when the corrupted drive is inserted, it doesn't show at the external drives
@xanderhyx97502 жыл бұрын
This doesn't show the fix if the error is from the windows itself, the USB flash works perfectly in other PC, except for one..
@mtechgamings47052 жыл бұрын
Me too.. My sd card worked on the pc in the shop which I brought it
@ChozoSR388 Жыл бұрын
I have this no media error on an SSD connected via USB (SSD rated for 5V @ 0.5A), and none of this fixes any of it, but! Linux is capable of accessing the disk no problem.
@maximvanderhoeden2477 Жыл бұрын
If you still have this problem laying around, may i ask What other pc brand you are using this on (including software) ?
@mowieci8744 Жыл бұрын
Even with your wonder soft there no option cuz no volume.
@alwinphilip3363 жыл бұрын
i downloaded recover it but it showing it cannot run in windows 7
@espein1875 Жыл бұрын
Disk management doesn't show the disk drives on my hp laptop. How else can I fix this?
@maximvanderhoeden2477 Жыл бұрын
does it change when you plug it in?
@adilstudio142 жыл бұрын
samsung 32 gb usb new not working after 6 months .removable disk and showing no media just properties in disk management tool windows 10,8.1 .can you solve it ?
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@eequaled2 жыл бұрын
Lol my flash drive doesn't show up and when i go to pc management i see a usb flash connected that has no media
@opppack53802 жыл бұрын
Can u make one on element 11 I have no usb connected But its saying usd no media
@megaten-jr9mx4 ай бұрын
ファームウェアが壊れていたら?
@mohamed_000 Жыл бұрын
I gave up
@luciferbox5577 Жыл бұрын
Like man people, I transfer videos from my pc onto a usb drive, which I then plug into my tv and watch. Recently, and I'm not sure if it's the usb drive or my pc, but when I try to watch a video now on my tv, the picture is 'jerky' and doesn't run smoothly, also, although the sound is perfect, it's completely out of synch with the images. I've tried more than one tv, so I know the problems not at that end. I've tried reformatting the drive, but that doesn't make any difference. Any suggestions please?
@RecoveritDataRecoverySoftware Жыл бұрын
Hi there, Thank you for your question. You can check the connection between the USB drive and the TV. Make sure the USB drive is inserted properly and the TV is set to the correct input source. Try copying the video files to a different USB drive and see if the playback issue persists. If the issue goes away, it could be that the original USB drive is faulty or has a slow transfer speed. If none of the above solutions work, you might need to consider using a different method to watch your videos on your TV, such as streaming through a smart TV or using a media player that supports various file formats.
@-Junx- Жыл бұрын
#2, i cant even see the drive in files explorer
@dotnetdevni3 жыл бұрын
Mine says no media yet its a 16gb usb drive its not shown in windows or in disk manager i cannot change the letter
@DiskTuna3 жыл бұрын
Of course you can't. This video is BS from start to end.
@theboldguy.2 жыл бұрын
Mine shows no media and it's full of errors for almost all solutions i saw .
@mrleon11152 жыл бұрын
the disk is grey out , when i use error checking it says this check could not be performed because windows can't access the disk
@Fancikoo2 жыл бұрын
me too
@mrleon11152 жыл бұрын
@@Fancikoo probably disk is physically damaged
@Fancikoo2 жыл бұрын
@@mrleon1115 no, i just instaling in flash drive windows and booom stop working and after not reconize.
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@franksalayog74273 жыл бұрын
good video sir. but i can't fix my USB drive error. [ 6e74667363686b2e 155c error ] l watched a lot of videos on yt. how to fix it sir?
@21.channel82 Жыл бұрын
thank you
@p9tc2 жыл бұрын
my ~pendrive~ is a sd card adapter lol
@KrooKroo2 жыл бұрын
how does a no media usb device can be chkdsk if it doesn't detect any storage capability?. this is a sham.
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@maximvanderhoeden2477 Жыл бұрын
exactly
@sandeepnishad-pq3gd3 жыл бұрын
what is best recovery software !
@RecoveritDataRecoverySoftware3 жыл бұрын
Recoverit
@addobernard41822 жыл бұрын
@@RecoveritDataRecoverySoftware hi
@addobernard41822 жыл бұрын
@@RecoveritDataRecoverySoftware pls how do I install and lunch the recoverit
@Fancikoo2 жыл бұрын
@@RecoveritDataRecoverySoftware not working.. dont detect the flash drive....
@Vroslyn2 жыл бұрын
reconnecting worked
@AnnieGMZ2 жыл бұрын
nothing worked
@habibpatoana29318 ай бұрын
Excellent video, but i think i need to do the last step. I'll update here after doing that.
@andyknowles6662 жыл бұрын
Nope, nothing works.... Just got a Kingston DTSE9 G2 - did a test and it failed, and now I can't access it at all. Disk Management says 'No Media' Chkdsk says 'Cannot Open the volume for direct access' Well looks like this one may as well go in the bin
@Fancikoo2 жыл бұрын
me too
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@paulregret31802 жыл бұрын
YES, same here, I shall give this piece of Clickfree shit to the Knacker Man
@maximvanderhoeden2477 Жыл бұрын
if you didnt throw it in the bin yet, then maybe check the disk management for mediums
@zohaibayubi3549 Жыл бұрын
But it does not work
@juhanjulm30742 жыл бұрын
Hi. Solution 5: Cannot open volume for direct access. In my case disk-g. (chkdsk g: /f /r /x) - is that right?
@archmohamedehab90412 жыл бұрын
same problem did u solve it ?
@juhanjulm30742 жыл бұрын
@@archmohamedehab9041 No
@madpriest7822 Жыл бұрын
been a year now did you ever figure it out haha
@maximvanderhoeden2477 Жыл бұрын
If you guys have this problem still laying around, I suggest the bin is the best option. I lost an usb of mine, it said the same thing on mine. I’ve been fiddeling with it for days with no result. Hope I could help :’)
@Hellen-he8ve Жыл бұрын
Your amazing thanks❤
@trendergamer91813 жыл бұрын
Tech vani
@justelisISkauno2 жыл бұрын
So bad... XDDD
@ahmed17476 Жыл бұрын
it tells me it cannot open volume for disk access 4:47
@SurajKumar-eo9ry Жыл бұрын
Same for me, did u get any solution? Pls let me know
@madpriest7822 Жыл бұрын
Ever figure it out
@maximvanderhoeden2477 Жыл бұрын
this only occurs on broken USB's :')
@AKP1703 жыл бұрын
Hlo sir. 👍👍👍
@RecoveritDataRecoverySoftware3 жыл бұрын
Hii
@mehran2300 Жыл бұрын
it's don't WORK !!!!!!!!!!!!!!!!!!!
@RecoveritDataRecoverySoftware Жыл бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@arnautovicc2 жыл бұрын
only for the naive !!!
@toni47292 жыл бұрын
Thank you for the future information. I know it'll come in handy.
@maximvanderhoeden2477 Жыл бұрын
I read thru the comments and tried these things myself. nothing really works. it mostly depends on what is broken about your usb.
@Rehan_md3 жыл бұрын
Hi sir
@RecoveritDataRecoverySoftware3 жыл бұрын
Hello
@sheldonnyakiti8660 Жыл бұрын
Thanks a lot for the tutorial
@TheMaxymuss2 жыл бұрын
he didn't find it, only in the disk manager, I can only change the name, and it just says no media
@MaxAlzadjali2 жыл бұрын
Fix That Help me > (Use Diskpart to Assign The Drive Letter). * Connect the effected USB drive. * Open CMD as Admin. * Type ( Diskpart ) then click Enter. Without brackets ( ). * After that, type ( list volume ) and hit the Enter. You should be able to see and recognize your effected USB Drive Volume number with No Media status among the other Drive numbers. Examble of the effected Drive : Volume 7 - Ltr G - Lable empty - Fs empty - Type Removable - Size 0 - Status No Media - Info empty. * Type ( select volume X ) replace X with the volume number assigned to your drive in the list. ( Examble: Volume 7 ). You will see ( volume X is the selected volume ). * Again, Type ( assign letter X ) replace X with the letter that assigned to your drive in the list. ( Examble: Ltr G ). After completing all these steps, close the Diskpart and remove the usb for 5 sec, then connect it to check if the computer recognizes your USB drive.
@Intervention23483 жыл бұрын
Nice...
@RecoveritDataRecoverySoftware3 жыл бұрын
Glad to hear that! Please hit the subscribe button.
@jereturunen21753 жыл бұрын
Hey! I have no clue if you'll see this but I'm going to ask anyway. So I got this usb to hdmi adapter that came with a disc to install drivers but I have no way of getting the drivers off of the disc since I don't have a disc reader or whatever it is called. Also I don't know the manufacturer because it is a cheap shit, also I don't know what chipset is inside. I have tried a ton of different drivers but no success. Can you help me out?
@maximvanderhoeden2477 Жыл бұрын
Well, if you still have this problem, I would recommend getting a disk driver, might be a bit expensive, but if you really want the driver, it’s your only hope then. You can also ask people in your neighborhood and other places if they have one. That’s all I can think of. Hope it might help (also I think it is a disk driver but I’m not sure).
@jokeryus6 ай бұрын
Bullshit...
@mohamedteta75352 жыл бұрын
شكرا لك
@Legendman384 Жыл бұрын
U're no help
@RecoveritDataRecoverySoftware Жыл бұрын
Hi there, Could you please elaborate on your question? We're glad to help.
@Legendman384 Жыл бұрын
@@RecoveritDataRecoverySoftware sorry man i was stressed trying to get things working, dude I'm sorry i was pissed and full of anger but i figured it out, again I'm sorry
@omprakashrout123 жыл бұрын
🙋🙋 👍👍 ☺☺
@RecoveritDataRecoverySoftware3 жыл бұрын
Glad to hear that! Please hit the subscribe button.
@aadhi02073 жыл бұрын
👍🔥
@RecoveritDataRecoverySoftware3 жыл бұрын
Thanks!!
@TheOriginalProfG Жыл бұрын
Can be seen in Device Manager and Disk Manager with a drive letter assigned, but says no media. It CANNOT be seen in Windows Explorer Running cmd as admin and using the ckdsk option gives the following output. C:\Windows\system32>chkdsk e: /f /r /x Cannot open volume for direct access. It is a 16gig Smartbuy USB drive
@oldGAMERhulk366165 ай бұрын
...
@RecoveritDataRecoverySoftware5 ай бұрын
Hi there, Could you please elaborate on your question? We're glad to help.