How to fix vacuum cleaner - 3 common problems

[@skabbymuff111]

cheers for this mate. same hoover. after years of crap hoovers this is the best one weve had, and not too expensive, just needs a bit of tlc every now and again. love the chill music also, perfect friday night material, fixing a hoover whilst pretending to be at a festival ahahaha

[@k-nemo]

Thanks for a lovely comment :)

[@MrMaggypie]

Thanks pal, 15 minute job that saved me replacing it with same

[@k-nemo]

well done

[@mistermotherfukerdisturbed3763]

Awesome channel God bless you richly I used to fix vacuum cleaners and microwaves I wish I could get back into it I got a different agenda today trying to survive a broken medical system

[@k-nemo]

Thanks for watching and leaving a lovely comment :)

[@cathconnolly5742]

Thank you solved it for us.

[@k-nemo]

No problem :)

[@WimmerJurgen]

thanks for sharing! Ive fallen into the habit of vacuuming first, then after that ... cleaning the filter of the airfilter and last but not least cleaning the hoover filter. Unbelieveable HOW MUCH dust gets caught up in a filter on a daily basis which otherwise would end up in my lungs and give my cells a hard time. I grow up in a highly polluted area (next to a highway and train station) and only could start now to take care of myself :)

[@k-nemo]

Thanks for sharing!

[@andysummersthxcinemaandmyc7748]

2:05 I shall be on the case with mine in the morning as i noticed a smell a coil or motor smell. Had mine since 2015 and so the five years, of use I guess now needs checking around the motor and belt. Checked up belts so they are out there and if one is needed one shall be needed to keep my little Hoover Spritz going on and on.

[@k-nemo]

Good luck with your repair

[@dashnimunsamy7386]

Hi there I have a Bennet read Force10 vacuum cleaner which lost sucking dirt. I first checked and cleaned the cylinder then the filter on the back of the unit. Still not working . Checked all the pipes were clear. Thinking I have to get a new vacuum. Then decided to check one more time found another filter on the cylinder top. It is not easily seen. Removed black round foam filter washed dried and replaced now it works with the correct force. So relieved I was. Thank you.

[@k-nemo]

Well done,

[@zaika_a_a]

2:06 How to remove this case mate? Any extra screws to remove?

[@k-nemo]

kzbin.info/www/bejne/d2TRhWClpLiZiqM

[@myflightchannel5572]

Thanks! I have this Hoover Whirlwind it might give me tips. Because it has no power

[@k-nemo]

Thanks a lot for watching and leaving a comment. Good luck with the repair

[@myflightchannel5572]

Apparently it still now working so we fot a new one

[@carolinedeniseb]

Hi how do you coil the internal spring for the plug recoil. Mine wasn't working so I took it apart and the spring sprung out !!! Mine is an old LG V-2600E. Thanks if you can help!

[@teofimocunanan2183]

i have robo vacuum paxcess, when i charge the lights are blinking but its not stop blinking and its not charging. kindly hepl.

[@13267]

אתה גבר אחי הטוב

[@judygraske2428]

how to fix self propelled on hoover vacumn

[@kakashi2801]

I can't detach the floor brush please help

[@k-nemo]

If pulling or turning doesn't work, try WD-40

[@beunited5302]

Hi Brother, how to remove sock inside the vacuum ? While operating it's suck the sock & I didn't find in the vacuum dustbin. I have Hoover hoover hc84-p6a-me

[@k-nemo]

Unfortunately, every type of hoover is a bit different so the way to take it apart is not the same

[@beunited5302]

@@k-nemo Thank you very much for your response. I removed it, it was in the vacuum center pipe.

[@captainprototype187]

nice 1980 ska, lol!

[@k-nemo]

Thanks

[@malcolmbrown5261]

I have the same problem , working fine , just shut down ,anybody got an answer

[@ElizabethTheron-r7q]

Hoover works fine,and then it stops,turns on and vacuum then i cleaned it,now it wont turn on.😢

[@k-nemo]

Maybe a wire has come loose? Maybe the brushes aren't making contact with the commutator?

[@vftvt]

Mine is not turning on

[@A22-y6p]

I have a vacuum cleaner doesn’t stop for like 5 minutes

[@Staubsauger_marvin]

Sehr ekelhaft Warum ist dein Staubsauger so verrostet in der Stange