How to Fix Whirlpool Cabrio Washer F7E5 Error Code | Not Washing or Spinning | Model

[@tweety3995]

Thank you so much!! My dad replaced the motor unit and when we put it back together he pushed the secure clamp back too far. We didn't realize it had a special groove to go into, so we got the mentioned error codes. I was watching your video while he was reassembling it a second time and said wait dad, something has a "special spot", 😂, and we realized what was done wrong the first time. Bot of us have pretty bad vision and we hadn't noticed that. So, thank you!!!!

[@DIYRepairsNow]

You're very much welcome! Happy to Hear You Found my Video Helpful! Thanks so Much for the Support!

[@nelsonrodriguez6967]

This has been the best video I was able to find to fix my washer. Gives you part #'s and DIY instructions well explained. Thanks!

[@hungryfortruth8608]

Hello I watched your video and it was wonderful! I pulled off the stator and it is a white one and the teeth are ground down but not as bad as the one in your video and the connecting piece on the washer with the spring on it was not ground down. I'm wondering if I'm about to the correct part. stuff that I looked at said shifter actuator but I don't see a shifter actuator on this one unless it's underneath the rotor. Is this the part since it doesn't have a belt like the other videos of shifter actuator repair videos or could it be something different. I just don't want to order the part if it's not the right thing. Can you please let me know what you think when you get a minute?

[@karl5997]

Thank you for this great video. I am sure this is the problem. My Whirlpool Cabrio is 8 years old, and has been great until this last year when I have replaced one issue after another on it. I think it is time to give up. 😖

[@JGoodZX6R]

Same. 9 years old and have replaced a few parts already. Now this. My mom’s 33 year old washer is still running just fine. I hate new appliances.

[@jsmall5952]

Thank You helping me figure out what is wrong with this piece of crap now I will never purchase another touchscreen again. Already replaced lid lock twice now got two new codes but video definitely helped me get the codes thank you! Wish me luck

[@DIYRepairsNow]

Thanks for sharing! I am Happy My Video Was Helpful, Hope You can Get it Fixed! Thanks for Watching!

[@matthewatowe2009]

This was an awesome video with good step by step instructions I followed them and was able to replace the parts with almost to issue. Thank you for the knowledge #KeepJESUSFirst

[@DIYRepairsNow]

Great to hear! Happy My Video Helped With Your Washer Issue! Thanks for Watching!

[@mattcarleo2521]

Thank you sir! Worked perfectly, however, I did not have to replace the rotor. Appreciate you

[@DIYRepairsNow]

Glad it helped! Thanks for Watching!

[@nb6584]

Very helpful!. Thank you so much!. Saved me a lot of $$

[@DIYRepairsNow]

Great to hear! I am Glad My Video was Helpful!

[@mattstephens1333]

Great video, it saved me $300

[@DIYRepairsNow]

Glad I could help! Thanks for Watching!

[@davekaiser4]

great job please keep up the great work the video is easy to follow 👍 thank you

[@DIYRepairsNow]

Glad it helped! Thanks For the Support!! 👍🏻

[@robamaya7433]

Hello, I have the F7 and E5 code, after pulling out rotor everything looks fine but what I did notice is alot of moisture and rust build up. Can this be my issue?

[@patrickmccarthy8035]

Excellent clear and concise 👍

[@DIYRepairsNow]

Glad it was helpful! Appreciate the Support!

[@1407pdr]

My new rotor doesn’t go on far enough to apply the screw to tighten

[@DIYRepairsNow]

@@1407pdr make sure you clean the treads and make sure you order the right part

[@lalo61]

Thank you very well explain

[@DIYRepairsNow]

Glad it was helpful! Thanks For Watching My Video!

[@craigdieter6960]

Hey, I have the exact same washer in the video. but recently everytime I start it the display flickers looks like the display turns off for second and then the lid locks and the display turns back on and it starts up like nothing happened and when it gets down to the last minute it just get stuck at a minute and doesn't finish the cycle, do you by any chance know why it's doing this? Never done this before? I appreciate it if ya got any ideas on what it could be.

[@luisalomeli7182]

Same issue here

[@JeanFisher-o8u]

I replaced these parts but now I start the washer, it seems to be sensing by the drum going around slowly and stopping, then it just turns off. Any suggestions what to do next?

[@DIYRepairsNow]

@@JeanFisher-o8u turn it off for a couple hours to reset the computer board, then start a rinse and spin, cycle or quickwash

[@malenagarcia4967]

Those parts works as well for the whirlpool cabrio WTW7000DW

[@kennethoquinn4216]

Replaced the rotor, slide assembly, and clutch, same error code after testing. Any ideas? Thank you😊

[@kennethoquinn4216]

Never mind, ended up finding broken wires to the clutch, all fixed now. Thanks for the video, it helped set me on the right track 👍

[@SeanGilbert-vr1qg]

What's a f9. Ei codeea

[@jasonx9]

my rotor and slider are damaged but also appears to be grease slung everywhere are the bearings shot? is there a way for me to check end play?

[@SeanGilbert-vr1qg]

Is this the f9. E1 fix vvidio...

[@SeanGilbert-vr1qg]

Are u there

[@DebbieStocks]

I have the error code E5F7 but I only have an issue when I’m on the power wash cycle.

[@christinanightin9979]

I can read that part code. Anyone have it?