THIS WAS MY ISSUE!!!! Thanks for the vid!! I was going crazy trying to figure out what’s wrong. Swapped bushings, ball joints etc. I feel like to only Evo owner that had this issue. 🙄. Glad I came across your video.
@Seanzaldo2 жыл бұрын
Just installed flex zs a couple weeks ago. Been trying adjustment after adjustment, check and recheck. Put a wrench on that nut for the one making noise and it's pretty loose. Hoping to go home, torque it down and be happy! Figured this would have been torqued out of the box but I guess not.....
@higherconscience7774 ай бұрын
What’s the torque spec!!!!!!!!!
@idkwhat48454 жыл бұрын
literally fixed this 10 minutes ago lol, impact wrench it and ur golden
@strongkareshi2 жыл бұрын
my rear driver side has been loud and it popped out looks like the bolt washer and dampner came off. was it bad installation??
@VidTubeWatch4 жыл бұрын
Yesterday afternoon I installed new Function and Form type 2 coilevers in my '05 Acura RSX Type-S. As soon as I drove it for the first time after the install I was hearing a loud clunking (thump thump thump thump) LOL. from the passenger side rear of the car. It wasn't doing this before at all. I took the tire off after jacking it up and everything seemed tight. I even made sure the top two bolts in the hatch were tight. I don't know if coincidentally the rear sway bar end link went bad, or if I need to tighten the top of the actual strut like you did on the front of your car. I don't know if my car is too low now. I didn't adjust the height one way or the other when I installed both rear sides. No noise at all coming from the driver side rear. Any help and advice would be greatly appreciated.
@elusive82 жыл бұрын
i’m having the same issue. only rear passenger side is making loud slam noise over even simple bumbs. idk what the issue is the other 3 coil overs are fine.
@BageI_ Жыл бұрын
Having the same problem with my rsx. It clunks when I go in and out of my driveway
@VidTubeWatch Жыл бұрын
@@BageI_ I just didn't have the rear passenger side tightened up enough. All good now. Still lower than I'd like. I have yellow Konis on the front. I have yet to put the new F/F on the front.
@higherconscience7774 ай бұрын
Please tell me the torque spec for that centre top bolt !
@Tuesflex5 жыл бұрын
U should of made a video bf of what it sounds like
@CarlosTorres-oh2lq Жыл бұрын
Would that cause the spring to be loose?
@surfjujitsu24565 жыл бұрын
Did you hear a noise that sounds like small rocks hitting the inside of thenwherl well. By chance ?
@diegosantos33335 жыл бұрын
I do
@sphwhat3165 жыл бұрын
What was the problem
@diegosantos33335 жыл бұрын
Dbzvegeta I changed the strut mount and the noise went away
@surfjujitsu24565 жыл бұрын
@@sphwhat316 dampner caps were slapping around hd to tighten them.
@suckinmesince19974 жыл бұрын
Bruh I was riding round for months like this lmao I’m smart
@1WickedSupra4 жыл бұрын
Rutledgem same here dude. Glad the video helped 🤙
@tartantyres38294 жыл бұрын
Why is everyones front left ?! I cant find anything lose i even tighten pre load
@RisingDecenber14214 жыл бұрын
did you find it? front left too we dont know jack shit
@HostileHern3 жыл бұрын
I got the same thing going on wtf 😅
@TheShakir983 жыл бұрын
same lol, front left
@gustavopolanco69254 жыл бұрын
What if. Even is tight and still making sounds?
@mrman8856 Жыл бұрын
Brooooo. At 3:35 exactly you can literally see that lower seat of the coilover is BENT!!! Being that video quality is terrible for some reason that part of the video VERY CLEAR!
@josuelozano75813 жыл бұрын
I have the flex z as well but mine don’t have the smooth part in both side of the strut how do i tighten them then?
@ImagineImagesSVG2 жыл бұрын
What's the colour code on the rims?
@kyle790115 жыл бұрын
Wtf? Your supposed to have both of those winding nuts together and tighten them together, that's where the locking feature comes into it?
@atakantan36194 жыл бұрын
What brand of wheels are they? I like them a lot
@1WickedSupra4 жыл бұрын
Mustafa Atakan Tan they are volk te37 replicas
@finesse15703 жыл бұрын
Why do you have coilovers if you’re not gonna lower your car genuine question
@1WickedSupra3 жыл бұрын
I live in New England. Every winter I would raise the car up (above stock height actually) and throw some snow tires on otherwise the car would be a snow plow lol
@91scalloped8 ай бұрын
I would have shit if I saw that. I have a 2018 sti with ohlins coilovers and they were clunking ridiculously.
@HIROckstar5 жыл бұрын
Bro can post some vid how your clunk sound? Cause I think I have same problem here using RSR coilovers.