Worked like a charm! Great tutorial. Thorough and easy to understand so I could make adjustments on my own. I didn't have a screwdriver small enough to get into the teeth and separate but I was able to use long pushpins (tpins for poster boards). I added more and more from each end and they slowly spread the teeth apart. Removed the pins and whole mirror is rock solid now. Thank you!
@SJ-rh8bn4 жыл бұрын
Dude, thank you for helping me solve the shaking mirror while driving. Super annoying.
@stonecoldt4r1694 жыл бұрын
No problem man!
@GarrettHMTB3 ай бұрын
Instead of spreading out those roll pins you can just add some electrical tape to the outside diameter of those pins to make up for the play on that part that holds the mirror to the mount. I did this when I did the 99+ upper console / sunglasses holder swap in my 1998. Electrical tape provides grip to the metal piece too. works great
@tylersheen89356 ай бұрын
Just did it, it works and honestly the best way he explained it, This KZbin vid valid as fck
@elizabethmartinez90923 жыл бұрын
thank you so much for posting this! I was able to fix my rear view mirror. Those spacers were hard to open up, once I did I had opened them up to much and the screw would not line up so I had to close them up a bit. This was the longest part of the process.
@stonecoldt4r1693 жыл бұрын
Glad it helped I didn’t have a video to help me so I thought I’d make one!
@danielvaldez1583 жыл бұрын
Dealt with this for two years. Finally decided to fix it. Great tutorial and focus on the two tiny cylinders. Thank you!!
@dangritsko53714 ай бұрын
Thanks for the help!
@Manuellopez.4 жыл бұрын
Thank you for your video it help me a lot I’ got my mirror fixed
@stonecoldt4r1693 жыл бұрын
Glad it helped I didn’t have a video to help me so I thought I’d make one!
@user-un4jc7pi9h Жыл бұрын
Thanks, your video was immensely helpful. I just acquired a 3rd gen 4Runner with the rearview mirror wobbles. My scratch awl has a nice taper on it to slide the tubes onto. On the opposite side of the teeth the tube has a flat that I used a flathead screwdriver on to push them up the taper of the awl little at a time on both ends.
@obijuan-2 жыл бұрын
HOLY CR**, You are not going to believe this, BUT, your mirror in your 3rd gen Taco is exactly the same as my 1996 Taco X-tend cab. Same mount. Same mirror. Mine has a simple cover and not all that cool overhead console. This one with the map lights was used in 89-97 4Runner. You could get it and install it, just leave the cover off, since you console covers it anyway.
@BgBootyJooty10 ай бұрын
Thank you!
@ChandlerLockhart2 жыл бұрын
Your video was a big help. No more shaking rear view. Thanks!
@lilyphipps1 Жыл бұрын
This is the most helpful video on the platform thanks so much i fixed my mirror with this vid
@marcclayborn84122 жыл бұрын
Thanks dude, your video helped. 👊🏼
@davomolino3977 Жыл бұрын
Dude YOU FREAKING helped me and saved me thanks happy new years and blessing from NY cheers 🥂
@praisechapelfullerton93437 күн бұрын
Great video thank you
@djwheil4 жыл бұрын
Thanks, this worked for my 2001 Tacoma also.
@stonecoldt4r1694 жыл бұрын
Bill Robbins sweet man!
@fatboi_69763 жыл бұрын
Basically the same vehicle
@TheBackeast Жыл бұрын
Dude you are a life saver!!!! Much appreciated!
@erikjules82392 жыл бұрын
Excellent video! Thanks, it worked and it’s a big relief!
@dominickessler4524 Жыл бұрын
Thank you.
@TheUrEstupid3 жыл бұрын
Thank you bro, jst side note i thought u were a girl from the thumbnail and ur voice 😅