How to Freebase (Phenylhydrazine HCl as an example)

[@jesss2830]

Nigel: It's not about drugs Also Nigel: Okay so here's how to freebase lidocaine from anal lubricant

[@jeffjeannette9364]

😂😂

[@planbnewssource8259]

Isn't that lidocaine made from cocaine leftover from coca cola

[@Chemucopia]

@@planbnewssource8259no

[@CatboyChemicalSociety]

BAKING SODA I GOT BAKING SODA

[@Bexks]

I GOT COCAINE! wanna do a science project? 😉🤣

[@Bexks]

Whip it through the glass, I'm blowing money fast! (is that what you was referencing?)

[@CatboyChemicalSociety]

​@@Bexks its from a song called "im in love with the coco"

[@jerrygomez1288]

WHIP IT IN THE GLASS NIGGA

[@simennilsen5457]

@@jerrygomez1288 i love this

[@kylerpadilla]

By far my favorite channel on youtube!

[@NileRed]

:)

[@asmolbean9300]

The way Nile says sieves is adorable

[@justsaying7979]

I always think he's saying "seeds" at first lmao

[@jeffjeannette9364]

To those caught in the cycle: I understand. To those who haven't, either personally, or through those they love : I pray you never have to. It's a slippery slope, and can happen seemingly overnight, or gradually. I fell into the ladder group, managing to function for quite a while before spiraling, and in my experience this made it tougher stay away from it. I didn't think it was strong enough, made excuse after excuse, justified it in the most ludicrous ways. Bottom line, most won't quit until THEY have had enough, and that's if they're fortunate enough to survive the lifestyle of course. It's not always the drug that kills you. None of this is set in stone, though and everyone is different. Also, if doing it for your kids, and family is what it takes to motivate you, then by all means GO. Fake it till you make it. For me, it took multiple trips, hitting the reset button on life, loosing everything, and everyone that tried to help me. Burning every olive branch, and every bridge afforded me. Every bridge but the one I was forced to sleep under. That's what I needed to go through, to wake up. I grew up in Detroit so I'm no stranger to rough neighborhoods, but being homeless in Camden NJ was an eye opener. I KNOW I have someone watching over me, because people who don't know me, paint me as this young vulnerable kid from the burbs, with no street smarts. Needles to say I've learned to use this to my advantage, and it's one of only reasons I survived as long as I did, but it was a miserable existence, and there's always someone with more smarts than you, more desperate than you, and more dangerous. I am not ashamed of it, and need to keep it front and center, not only so I don't forget, but with the hope that someone, anyone can relate. I'm not 100% drug free, I smoke weed, and occasionally drink, but the other shit is no longer in my vocabulary. Not saying I am "Cured" and I still have intrusive thoughts/cravings, perticularley in stressful times, and death anniversaries, but as time goes on they are fewer and farther between. I'm not doing any today, and that's the only day I focus on. Never know, what tomorrow holds, I could trip on the sidewalk and fall face first into a kilo some guy ditched in a car chase. 😉 I hope someone gets something out of this, there's always hope, life is gonna suck sometimes, but it's worth living. Even if you have lost your entire family, there's a new family out there for everyone, who takes the time to seek it. If no one else has told you this lately you are relevant, you are needed, and you are loved.

[@jake-kl1gm]

i read this before school while about to pour up a cup of robitussin. You have convinced me to not do that lol! I HOPE YOURE DOING OKAY

[@MrFcukthis]

Thank you.

[@jeffjeannette9364]

@@MrFcukthis ❤️ You're welcome

[@jeffjeannette9364]

@@jake-kl1gm I am actually doing great. Have had the same address and phone number for over a year, that's how I know 😆

[@Unmaleable]

​@jeffjeannette9364 Glad you're doing well dude! I didn't think it was strong enough either on my first 2 days doing it...3rd day I got it from a new guy I went to highschool with years ago so I trust him....tiny little bump and omg it was strong...then I remembered he sold hard back in the day so what I got wasn't stepped on. Guess he does the stepping when he rocks it but boy oh boy...never touched it again after that

[@awsomesauce03]

please please do a lab tour

[@Tom-wm4in]

I love your videos, you chemistry more than random atoms and graphs.

[@craigzipp6277]

Thanks for showing me how to make crack homie

[@tacovampire9794]

If u didnt know now you know !!!!!p.s u can learn to cook crack on reddit

[@Katiethekitten]

Baking soda 😜🤪

[@povgfuelgaming7521]

0:39 NileRed being NileRed

[@SusanWojcucki]

Haha, can't wait to see the skatole video!

[@DannyDynaWhite]

the world needs a NileRed channel on a alt platform

[@Pow3llMorgan]

Any phenylamines or tryptamines coming up? :) Schulgin would approve.

[@original_Sandu]

+Povl Besser KZbin is not the right place to search for such things. Neither are they legal in any country, nor will youtube support such "tutorials".

[@stupidvids0]

those are easier to just extract anyway

[@Liftedpeace61]

Dmt is easy as all hell to extract

[@covodex516]

As people will do it anyway despite any laws or lack of knowledge, trying to keep away these informations from public is a rather unuseful or downright stupid strategy. The right way of dealing with the drug problem is to spread information so if someone decides to do drugs, he at least knows where the dangers are and how to lower the risks as far as possible, and what exactly he does there. Last but not least, if someone really is eager to get these informations, he will easily get there. If people want to do drugs, their health and safety is their responsibility (like it is with anything else too) and they certainly don't need to be punished for being curious or just wanting to have an alternative to alcohol.

[@freethebaseiliesse4126]

+Covodax Wise words, it's rare to see people saying what is more than logical. People making drugs should have the possibility to be informed about the differents dangers for the primary reason to avoid innocent people being hurt in an explosion, deadly fumes, ... Some drugs are basicly easy to make, but can also turn in a disaster if they are not done in the right conditions. If NileRed would teach drug addicts how to avoid accidents that can happen when manufacturing drugs with the purpose to avoid innocent people being hurt, I think he would act in a positive way. For countries where drugs are illegal, that wouldn't empeach the cops continuing their stupid drug war

[@animegod5957]

hey man sorry to bother just wanted to say I love your videos, you've helped me so much with chemistry (not even mentioning how much you've made me love chemistry. and now I want to give back to my chem teacher (I'm in grade 11) and we need 2,4-dinitrophenylhydrazine for a practical but I don't know how I would separate the different isomers, so can you please make a video on the synthesis of 2,4dnph (we need this because we use it in our practicals and we can't get it because it's expensive as hell) (our syllabus is the Cambridge syllabus)

[@NileRed]

+anime god heyz unfortunately I don't think I'll make it (at least any time in the near future)

[@animegod5957]

Ok thanks for your reply

[@joelbritto2877]

For anyone who would be trying out this in a bigger scale, be careful of phenyl hydrazine as it causes itchiness of skin and may cause blisters if it's in direct contact with skin for some time.

[@ashdevos5705]

vanillin oxime sound interesting, id like to see that

[@Atomos95]

Your explenation was good. Good work =)

[@lorenzopuccianti3396]

Can you do a Fischer indole reaction with phenylhydrazine? That would be cool

[@TheGodfather101]

You should mention that the reason you decided to use Dichloromethan instead of say diethyl ether etc. Because of how it makes the organic layer form at the bottom instead of the top

[@captaincobop]

Thanks Nile.

[@10--50]

So if one wanted to purify cocaine. You'd dissolve it in some water in a sep. funnel then react it with a weak base like ammonia to precipitate the freebase, add a non polar solvent like ether, drain the bottom portion. then dry it, and convert it back to cocaine hcl, by adding some muriatic acid and drying again....?

[@gmcenroe]

I can see you never took chemistry in high school. lol.

[@HAVEHOPE12345]

I usually just put the freebase in a pipe and light it. But this method sounds way more advanced.

[@robbin763]

All your (free) base are belong to us

[@isawadelapradera6490]

You have no chance to survive make your time

[@DennisAlexioAndyHug]

Lol

[@tagwanted1840]

hahaha this is h my y first time being drunk this is making my head explode

[@shodanxx]

You seem to use a lot of dichloromethane. I can't find any on ebay or anywhere else. Is it sold under another name ? What would be a more accessible equivalent chemical ?

[@conorgrahamdoyle4027]

your videos are awesome

[@computerguy1372]

Very interesting Nile thanks for the upload and I cant wait for more! How whould you turn a sulphate into a freebase?

[@NileRed]

+Matthew Gress Thanks!

[@williamschutz4982]

I wold love to know. I mean I WOULD LOVE TO KNOW!!!

[@alex6629227]

Literally the same way

[@MrBradshawbenjamin]

@@williamschutz4982 lol

[@kentneumann5209]

@Edward Elizabeth Hitler Swim sez that oily mess can be converted to hydrochloride by adding non polar solvent and introducing hydrogen chloride gas. Filter. Repeat gas, filter again. Or if its in water, pushing it into non polar solvent with sodium hydroxide solution, separating, and introducing hydrogen chloride gas to non polar solvent. Filter. Repeat until nothing falls out. The ancient ones passed down this knowledge to Swim, but he is ancient himself now and his mind is half in the ancestors world and half in this so his mumblings cannot be trusted anymore.

[@bcubed72]

Yo, sittin' here, basin' like a G!

[@XAnax-e4k]

The video was prepared in the best, and many thanks for sharing. I just want to add a caution to the procedure. It's better not to use DCM for extracting when using an excess amount of NaOH. CHCl3 in trace amount can participate in reimer timer reaction. So better to use K2CO3 for neutrlizing without problem with DCM or using Ether for extract in the epresence of excess NaOH. good luck!

[@hes_elbow522]

Would love a video on N,N-Dimethyltryptamine

[@simennilsen5457]

this was basically it, he wil never do a real one

[@hes_elbow522]

@@simennilsen5457 yeah ik I’m just joking lmao

[@ithewho6603]

@@hes_elbow522 Your propic is glorious.

[@hes_elbow522]

@@ithewho6603 lmao ty ain’t gonna like that’s me from like 2 years ago

[@VinnyMartello]

I used to freebase phenylhydrazine. But that sneaky red devil is no longer a part of my life!

[@derekwashuck7691]

Do you ever work with hydrofloride salts of chemicals instead of hydrochloride salts ?

[@jamesparker8529]

In organic chem, it's pretty uncommon to do so, for a number of reasons

[@willthomsen7569]

This is some breaking bad shit u should do a video on the extraction for pseudoephedrine from cold pills 🥶

[@FennecFoxFurry]

Thanks bro 👍. Just made freebase hydrazine.

[@sprsae9003]

id like to see how to freebase alpha-methylphenetylamine?

[@Kirt44]

Me too

[@johnjohnson201]

I’m never a fan of when I’m incorrectly saying a word and I finally hear it the proper way. I was taught Amine was pronounced “uh-mean”😭

[@wgm-en2gx]

Clueless in chemistry here... You guys have been nice in answering my other questions... At the one minute mark, a diagram shows the process. However, both sides look the same to me except that on the left is hydrochloride and on the right is NaCl (a salt right?). So I have a two parter: is this "freebasing" for getting ride of the hydrocloride (I believe this sort of what is explained in the beginning)?. Part two is that is there a H2O missing in the diagram? Thanks in advance...

[@kevinbyrne4538]

+wgm4321 -- (1) "Freebasing" is removal of the H+ ion from the amine salt (i.e., removal of the H+ from the N atom). In the example that you cited, yes, freebasing removes the hydrochloride. (2) Yes, there is an H2O missing from the right-hand side of the equation. However, since the reaction will occur in water, the production of a little more water during the reaction would hardly be noticeable and wouldn't significantly affect the course of the reaction.

[@wgm-en2gx]

+Kevin Byrne Thank you. Fascinating stuff.

[@ΓιώργοςΚ-ι1ζ]

You're gonna have to buy a rotary evaporator eventually sometime.. I mean doing distillation just to evaporate the low bp solvent DCM is kinda not worth the time.

[@Buccibeverlypolicewhosarat]

I noticed in your synthesis you added the NaOH to a beaker then the H20 . In general is always better to add a base to water and not the other way around Just saying SAFETY FIRST

[@NileRed]

+Rare Earth That is true. However, it is not exothermic enough to immediately boil the water. It is not like adding water to conc H2SO4. In general, NaOH is pretty tame, but it still 'should' be done the other way around.

[@Buccibeverlypolicewhosarat]

I agree . Getting people with the correct procedures is important. I enjoy your videos

[@nivmoshe5536]

i have noticed 3 creepy sounds hear like a knok at the video: 4:39 2:04 2:54 wierd...

[@UberRobot]

Hi Nile!I'm currently doing a project on extracting caffeine and I have some trouble writing down nice custom organic reactions in word.So... How do you write the reactions in your videos? Did you find them somewhere or do you use a program?

[@Timothy656]

+UberRobot He is probably using a chemistry drawing programme called ChemDraw.

[@NileRed]

+UberRobot The comment below is correct! I got a free license from my school for ChemDraw

[@UberRobot]

Thank you! Will look into it :)

[@elliottboomsluiter7214]

I assume the same principals apply to basically any compound that's bonded with HCl?

[@CYXXYC]

Cocaine and crack look like sharks xD

[@madgear1174]

Next video should be how you took the freebase and turned it into pcp.

[@tarrySubstance]

thanks for the video it was a good chemistry lesson

[@Gabbos]

cleaning mercury vid will be fun!

[@Zachmartus]

poke a hole in a coffe filter and pour the mercury in slowly and make sure the container you use to collect the mercury you wont be using directly after... or you can clean it using nitric acid, the acid method is unrecommended by me due to me not having a proper setup at the moment.

[@eduardojesus2522]

Are freebasing yields usually this low or was it something about this particular procedure that made it so?

[@kentneumann5209]

At 5:43 could activated charcoal be used instead of silica gel?

[@justsaying7979]

nope

[@sonotthere]

voteing for acetone/ dry distilling

[@alexi3489]

In the upcoming videos, you mention that lithium hydroxide can convert carbon dioxide to oxygen. Apparently if you react hydrogen peroxide with the LiOH, followed by dehydration, it makes lithium peroxide, which can replace CO2 with O2, but it doesn't reduce the carbon, just turns it into carbonate. Is that what you meant, or am I reading it wrong?

[@NileRed]

+Alex I Yeah sorry. I would need to make the peroxide. Also, you are right with the wording. It is replacing O2 from CO2 and not converting it.

[@alexi3489]

+Nile Red That makes more sense. Your videos are great, by the way. Keep up the good work.

[@tonyynot6578]

😂😂😂😂 thanks for the explanation. keep thinking of Richard Pryor when you say free base. quetsion... what is the best chem to get animal fat stuck on stainless steel. we used to mix our own cleaner. triton citric acid and something else. the problem is I don't remember the "something else" part. the gentleman who had the recipe has long been gone and we have been using a cleaner call sanivac. would love to go back to mixing out own cleaners. can you help, sir?

[@wadehutchinson1963]

is it d or l ? i noticed that the hn came off the bottom

[@jheadley635]

When you want to remove water from the solution, why do you use molecular sieves versus sodium sulfate?

[@tacovampire9794]

Can you make a video how to extract dmt and how to test good coke

[@gmcenroe]

anhydrous magnesium sulfate is a better drying agent than mol sieves for DCM.

[@sjn7220]

1:53 When one stir bar just doesn’t cut it.

[@amarschderhammer4243]

Please show how to convert the freebase back to an hcl or a sulfat

[@gozitanmontainbikegoprorid5261]

from which websites do you get all of the chems an glassware can you please you give me some names

[@NileRed]

Pretty much just eBay and aliexpress

[@gozitanmontainbikegoprorid5261]

Ok thanks

Will this work in a spoon? What about the paper clip? Are you an ash man or a steel wool guy?

[@Aslyuriel]

I vote for the vanillin oxime.

[@KristoffersChannel]

Not directly related to the video above, but I'll still ask, and hopefully get an answer. Are you still able to purchase HNO3? I'm having a hard time getting a hold of it here in Europe. I'll have to synthesize it myself. Good and educational video by the way.

[@NileRed]

+ChristopherNewcastle I am able to buy it from Ebay, but I have actually never purchased it before. It can be made using sulfuric acid drain cleaner or sodium bisulfate and a nitrate salt. That is pretty cheap. I am going to make it using the bisulfate and nitrate salt at some point.

[@KristoffersChannel]

Thank you for the quick answer. Looking forward to the video. Is this how you usually get a hold of nitric acid?

[@NileRed]

A friend was able to give me a few hundred mL of nitric acid and I have been using that ever since last year. I don't do many nitrations so it doesn't go down very quickly.

[@KristoffersChannel]

I see, thank you for the information.

[@mayaal9352]

Can you show us how to set up rubber in separator funnel. The one I have in lab is not tight and gave me hard time of leaking.

[@sarathm3658]

what you are adding ,after the extractions of dichloromethane?seeds like

[@ofwgkta3022]

Can you put powder coke im a ciggeratte? Will it get you buzzed?

[@alockworkorange7296]

Can u purify something by freebasing. Filtering the liquid with crap still dissolced then re acidifying to get a pure salt?

[@thebestofall007]

Where did you get your impressive knowledge of chemistry Nile Red? Where did you study?

[@NileRed]

+thebestofall007 honestly, most of it is from reading online and reading papers. My schooling in organic chemistry helped a lot, but the bulk of what i know is just from doing stuff on my own time out of curiosity.

[@nimrodbeck6535]

Nile where can I find your video on Methylphenidate ? 🙏

[@ThePaintballgun]

Wait Wait Wait, the salt is insoluble in water where the free base form is? That seems backwards to me.

[@ThePaintballgun]

raumaan kidwai I get that, but I haven't been able to find any other salts (even amine salts) that have this property, so I'm a bit confused.

[@ThePaintballgun]

raumaan kidwai I see I see, well thanks for the help!

[@uncleian613]

SWIM would like to know how to freebase methylphenidate with sodium bicarbonate, or if it is possible in the first place. Said methylphenidate is riddled with inert ingredients, would this be a problem?

[@loupandsnoop]

From your previous video (synthesis of phenylhydrazine HCl), 4.6 mL aniline -> 5.5 g phenylhydrazine at 100% yield. You crashed it out from 100 mL water, which can dissolve 5 g phenylhydrazine HCl (solubility = 50 mg/mL) (you lose less because the water had other salts in it). => You lost most of the phenylhydrazine as its HCl salt into the water from which you first precipitated it in the aniline to phenylhydrazine HCl video.

[@officialninjachannel]

Dude, cool!

[@FutureAIDev2015]

Did you leave your stir bar in the separating funnel?

[@AwesomePower1234]

why do you filter the solution through silica gel? That's new to me.

[@phizzhead53]

Can you freebase caffene and make a smokable version

[@Aaron-zu3xn]

richard pryor on fire

[@xuNsh1ne]

I vote for Nitrous oxide

[@jonmacdonald5345]

xuNsh1ne That's not Hard at all!

[@shonaoneill5151]

Dear Nile, another fantastic video to your collection. And finally, someone who is prepared to make a freebase video that is not drug orientated, absolutely wonderful Nile. I would be very interested to see the "Nonivamide" video. At the moment I have no means to donate on patreon, if I could I honestly would. I love your channel, I look forward (as do many others) to every video release of yours. You are my favourite KZbinr. Having said this, could you do me a massive favour, it would really mean a lot to me. As you realise KZbin brings with it fame, and like it or not fame means fans and I think I am your biggest fan by far, you're AWESOME. So, what I would like is your autograph, I collect them you see....from my favourite movie characters, sports etc. And your videos have inspired me more than I think you can ever realise. So, could you sign a periodic table print off for me, something like that. I will send you the money for postage etc so it won't cost you anything........If you could do this I would be sooooo grateful. Many thanks, Regards, Peter :-)

[@NileRed]

+Shona O'Neill Send me a PM and ill see what I can do!

[@NileRed]

+Shona O'Neill hey, you never messaged me!

[@lowercasehandle]

@@NileRed has he yet?

[@julius8631]

@@lowercasehandle lol, he's too good for Nigel

[@aR0ttenBANANA]

But how do baseheads freebase at home them?

[@xpndblhero5170]

0:38 - WTF are we doing today¿! O, OK... It was just an example. 😅 I'm gonna go put my cocaine away now... 😄🙄

[@johngriffin618]

Can molecular sieves be used for drying nitric acid?

[@rocket_hops]

i know youre a busy man, and this is a 7 year old video, but could you potentially give me an analogy or a layman term to what freebasing does to something, like yeah something about amine and something, but like what does that "mean", is it like a purification type of deal or something

[@jonmacdonald5345]

Do A Adrienachrome Video!

[@shotseeker3137]

did you pour water on to lye?

[@pyro2525]

Good video, I was wondering if you chose to use a cotton plug for any particular reason? And was that some kind of column chromatography-esque filtration through a pipette at the end? lol p.s. Wouldn't mind seeing cleaning sulphuric acid if you have Ro-tyme.

[@NileRed]

+pyro2525 I got some sulfuric acid from the local store that i cleaned. Not Ro-tyme but something similar. I used the cotton plug because it is easier to clean the funnel that my glass frits. So it was just laziness. It works well though. The silica gel at the end serves to filter out small particles and also it pulls water. Clearly it didnt do much though...

[@pyro2525]

+Nile Red Ahh ok, that makes sense, I'll keep that in mind. The peculiar thing about this acid is that after strong and prolonged heating (white fumes evolving for awhile) is that it goes from that slightly red/yellow tinted colour to black. Makes me wonder if getting 30% H2O2 would even be worth it.

[@NileRed]

That is very weird indeed. When my H2SO4 got to boiling, it turns a faint yellow color (which went away on cooling) but that is about it.

[@pyro2525]

Yeah I'm really not sure what to make of it. It apparently has a "corrosion inhibitor" but I haven't been able to figure out what it would be (buffer, etc), or if it can be oxidized by H2O2. Do you happen to have a brand I could look for?

[@NileRed]

Do you live in Canada? The only brand I could find is in Rona/Quebec. The corrosion inhibitors are usually organic based, but they when I researched it, they were kind of proprietary secrets. So more infor is hard to get. They prevent the sulfuric acid from attacking the metal in pipes. At leasy my brand was able to be oxidized by H2O2. www.rona.ca/en/super-drain-liquid-drain-opener-7666031

[@johnshaughnessy2018]

I want to know hwo to make trithioacetone

[@Dawe0110]

He has such video

[@elementbr]

We always call it a siv, not a seev. English versus American presumably.

[@gregmcb5305]

What’s funny is that using amphetamine would be less toxic

[@filipzen3624]

Please try NH4MnO4 - ammonium permanganate. Could you make it?

[@kensticko7607]

So what would you use the oil for

[@dharamvirsingh9551]

what kind of seed you used and why were they used ?

[@xgerbil3586]

If you put it through a centrifuge, then something like syringe filtration would it help to clear it up?

[@NileRed]

+Austin Scriver It might. I am really not sure what is in it. Since it is a suspension though, I think it could clear it

[@ganger631]

Hey, i know its unrelated to this video, but where do you get your conc sulfuric acid? Do you distill it at home? or you purchase it?

[@Zachmartus]

+ganger631 This is where I get mine: unitednuclear.com/ but I'm sure there are plenty of other sites you can get it from like amazon or ebay.

[@NileRed]

+ganger631 I got mine from distilling store bought drain cleaner

[@ganger631]

Nile Red Oh, is your heating mantle diy, like the one that nurdrage built or a commercial one. I am have a hard time concentrating sulfuric acid.

[@NileRed]

I have 2. One for 100mL and 1L. I bought both.

[@ganger631]

Mind if you tell me the model number?Thanks.

[@Stanley.77]

One can be a "base head" without using drugs! 😉👍

[@g00gdobb3ers7]

So if im understanding this right, phenylhydrazine HCl is more acidic than its nonsalt counterpart because the salt form has HCl which is more acidic? So if that is true, is that the reason that we would use something like NaOH to neutralize the acidic part of the molecule "HCl"? I'm pretty curious if im understanding this correctly, can someone explain if im not quite right on this?

[@gmcenroe]

NaOH is a stronger base than the organic amine base, so it readily liberates the HCl salt from the amine to form sodium chloride which nicely dissolves in the aqueous layer while the free base remains in the organic layer, in this case DCM. Removal of the DCM solvent gives the pure free base. His drying method was not great, maybe he didn't have magnesium sulfate which is the preferred method to dry moist DCM.

[@coolfoex]

I would like to see te mercury one :3

[@percutie9026]

i have a question and im dying to know the answer.What's the difference between codeine hydrochloride and codeine freebase??

[@filipealarza9079]

Codeine HCl is a salt. Codeine freebase is just the regular compound, which comes from neutralizing the HCl salt.

[@williamrice9264]

what software so you use for the equations? I have been using chemdraw for my lab reports but it always crashes on my pc

[@NileRed]

+William Rice I also use chemdraw. It is laggy but works

[@tomytherose2920]

Do a Nicotine extraction from Tobacco

[@bigdaddyjoosseee]

I mean I'm asking for a friend a guy I know who's definitely not me but....how would you do that to coceyeinnaa???

[@rdubu2863]

Eddie Murphy was good at these making freebase . Until boom blew up on him buzz kill . thanks for the awesome video like always well done good stuff 👍

[@MadScientist267]

Umm... Wrong actor

[@simennilsen5457]

damn, i have never seen red crack before