How To Get That Professional Finish With A Paint Roller {Jon Boat Painting Project Part 2} Lowe 1436

I am currently converting a Lowe 1436 jon boat to a bass boat and the first step is to strip and paint this jon boat. This video is part 2 of a 2 part series from prep to painting a jon boat. I've never painted an entire jon boat before and I wanted to experience what it's like get my hands dirty and get it done. At the end of this video I will share with you my recommendations based on things that I learned threw this process. Watch as I take you step-by-step through the jon boat painting process.
Please tap that like button and subscribe to our channel to stay up to date for future videos!!!
For boat builds, please message me at:
Instagram: / bass_brothers_fishing
Facebook: / bassbrothersfishingdmv
Email: [e-mail]
TBNation 5% Off: tbnation.net/?...
TBNation checkout code 5% off: BBF5
Amped Outdoors Affiliate Link: ampedoutdoors.com?aff=7
Top playlists on our channel:
Lowe 1436 Boat Conversion: • Lowe 1436 Boat Conversion
Lowe 1448 Boat Conversion: • Jon Boat Conversion
Pelican Bassraider: • PELICAN BASS RAIDER 10e
Alumacraft 1232 Boat Conversion: • Alumacraft 1232 Boat c...
Vibe Kayak Mods: • Vibe Kayak Mods
Send us stuff at:
Bass Brothers Fishing DMV
PO Box 71
Spencerville, MD 20868
Links down below to various products used in my builds for your convenience. Affiliate links help to support the channel and allows us to share this content with all of you.
Tools Links:
Angle Grinder: amzn.to/3QvRdnV
Jig saw: amzn.to/3Qxnev... Saw: amzn.to/3HHjrZ2
Band Saw: amzn.to/3HHjrZ2
Reciprocating Saw: amzn.to/3Omqw33
Tin Snips: amzn.to/3bbS6lu
Drill/Driver: amzn.to/3Hxt0ts
Impact Driver: amzn.to/3tKvmPU
Compact Impact Drill: amzn.to/3N3H92s
Manual rivet Gun: amzn.to/3mWYwrc
Cordless Electric Rivet Gun: amzn.to/3mZdehn
Heat Gun: amzn.to/3baPtAp
Fish Tape: amzn.to/39yUxhB
Wire Cutter, Stripper, Crimper: amzn.to/3QvYPXr
Gloves: amzn.to/3N1x2LO
Safety Glasses: amzn.to/3N4fWg0
Ear Muffs: amzn.to/3O2V4HF
Tape Measure: amzn.to/3OsMkdD
Level Tool: amzn.to/3bePP9j
Speed Square: amzn.to/3zMv2DV
Orbital Sander: amzn.to/3zMJcVY
Metal Filer: amzn.to/3N3LEdp
Camera Gear
GoPro 7 Black: amzn.to/36Tt6Lq
Gopro 7 Silver: amzn.to/30P4tMj
External Mic: amzn.to/2GYgjg8
Lavalier Microphone Wind Screen: amzn.to/3lyMXnj
Rode Wireless Go: amzn.to/34HEwiY
Saramonic 3.5mm Plug and Play Mic: amzn.to/3iJUwpn
GoPro Case: amzn.to/3nEWwCX
Camera Video Light: amzn.to/3dgTpfI
Camera Light Rechargeable Batteries: amzn.to/36TCT4c
External Battery Small: www.amazon.com...
External Battery Large: amzn.to/3lDld0L
Rod & Reels
Lew’s Mach 1 Combo 6’ 10”: amzn.to/33MrQYx
Lew’s Mach 2 Combo 7’ 1”: amzn.to/3nG0CL6
Lew’s Mach Crush Combo: amzn.to/30RORHM
Drop Shot/Ned Rig Setup:
Lew’s Drop Shot/Ned Rod 6’ 10”: amzn.to/33MqQUh
Reel Shimano Stradic Ci4+: amzn.to/3lAighK
Disclaimer: I am not a professional fabricator or builder. Modify your boat at your own risk.
#jonboattobassboat #jonboatconversion #bassbrothersfishingdmv

[@ronmarshall725]

Great Job! One of the best "how to paint an aluminum jon boat" videos on the internet. And I know because I've watched them all, LOL

[@BassBrothersFishingDMV]

Lol thanks.

[@michaelgonzalez8863]

I know the hard work you put into that paint prep ; looks nice

[@BassBrothersFishingDMV]

Thanks Michael.

[@georgejordan3093]

Boat turned out great Dawg, but really good instructional video as well, following your build getting ready start my own this winter. Appreciate the time you put into videos they'll be big help this winter.

[@BassBrothersFishingDMV]

Thanks man. It's allot of work to document this but comments like this makes it all worth it. Tight lines.

[@mikesimmons7539]

Looking good like a fishing boat should . You put in a lot of time and hard work and it shows . Great job .

[@BassBrothersFishingDMV]

Thanks. 👍🏾🤙🏾

[@rogersailors154]

I'm impressed again. You could have taken the easy road, but you maintained your project integrity! I appreciate your sharing your experiences on your channel.

[@BassBrothersFishingDMV]

Thanks. It was a tough road to take but gained a great experience to take forward with future builds.

[@rogermorris5224]

The best paint video I have viewed. You didn't talk 90 miles an hour with loud, obnoxious music playing while you were explaining, unlike so many others. I learned a lot from this video and really enjoyed it. Thank you!

[@RocklandRednecks]

Just spent a couple hours watching aluminium boat painting videos and this is by far the simplest, easiest to follow series of videos I've found. The final product turned out fantastic as well. I have a 14 foot aluminium from the 70s that is going to require some serious prep, looks like I need some basic tools and a lot of time and attention to detail. Thanks for posting this. I cant believe theres so few views on this video, keep it up!

[@TN-Vols-Fan]

As always, you're prep and final work is 100% spot on!

[@BassBrothersFishingDMV]

Thanks man 🤙🏾👍🏾

[@WednesdaysDragon]

Your shows are always boss! Always time well spent here! 💯

[@BassBrothersFishingDMV]

Thanks 👍🏾

[@7divad37]

Great work, nice finish. You can never under-estimate how important the prep work is, thats where all the time goes... Just gotta remember the prep work is never going to take longer than the time you will be using / looking at the boat, and you dont want to spend the next few years wishing that you had put just that little bit extra into the prep, the blemish you can avoid by 10 mins extra work is the one that will catch your eye for years.... The time you spent in prepping this boat means you should have years of pleasant fullfilment, and compliments, well deserved.

[@hammer9856]

Love your attention to details and sharing them, including the fails and work arounds. Paint job came out great! Looking forward to seeing the rest of the build.

[@BassBrothersFishingDMV]

Thanks Hammer

[@SluSharkND]

That roller gives a great finish. Nice job Sir!

[@BassBrothersFishingDMV]

Thanks

[@duanetaylor1526]

The boat is looking good. Can’t wait for the upcoming videos. That bait is going to be awesome. Tight Lines!!!

[@BassBrothersFishingDMV]

Thanks man.

[@bayoubengal67]

From one OCD'er to another, great video/tutorial. Thank you for taking the time to do this video.

[@BassBrothersFishingDMV]

👍🏾

[@stephendall2329]

Great video, thank you for the detailed explanation on everything.

[@fishingwithjett5373]

Great looking paint job 👍🏾 definitely looks like a time consuming job. The reward at the end is priceless.

[@BassBrothersFishingDMV]

Thanks 🤙🏾👍🏾

[@shenwow6478]

Looks fantastic, can’t wait to do this to my boat!

[@seanthomas8487]

Total boat makes some good products. 👍🏾

[@BassBrothersFishingDMV]

Yea. I can attest to that now. 🤙🏾👍🏾

[@stephenhawkins6389]

Very good job! Thank you for making this video. I am stripping a Jon boat now myself. I used several cans of cheap dollar tree oven cleaner and it did remove some paint. I also used a good brand of paint remover. For the cost what worked best for me was cheap brake fluid . I brushed the fluid on and left it overnight. It seems to only take one layer but it works

[@BassBrothersFishingDMV]

Thanks. I might need to try that sometime.

[@superduty130]

Looks great, the build I sent you pictures of, we did a slightly darker gray. I’m sure this on will turn out great. Can’t wait to see the final build

[@BassBrothersFishingDMV]

Thanks.

[@garydumoulin6318]

Great job looks like a new boat.

[@BassBrothersFishingDMV]

Thanks

[@kipmyers5897]

Alot of people might not think they can paint Thier boat with a roller but I use to paint large 50 ft and larger high end boats and we used a method called rolling and tipping....The process was to roll on a paint similar to automotive paint using a slow reducer in the paint....then the tipping part is actually taking a foam brush and very lightly taking the tip of the brush and very lightly dragging across the paint only toughing the bubbles or what I call orange pill....the paint will lay down and as it dries it becomes flat and it's hard to tell it wasn't sprayed....This method is used to prevent wasted paint from over spray.....I learned this from a company I worked for that restored large boats.....thought I'd pass on the info to fellow boaters....The paint used was a special marine paint made for this process...Again it's called rolling and tipping.....Thanks for your video looks good!!!

[@BassBrothersFishingDMV]

Thanks for sharing. Will keep that in mind.

[@briangullickson9013]

Thank you for sharing this tip Kip Myers!

[@brandonwatsonmedia]

It looks amazing! Great video!

[@BassBrothersFishingDMV]

Thanks

[@ianyokoro8925]

Dang good paint job! 👀👀👀

[@BassBrothersFishingDMV]

Thanks.

[@pwinnett222]

Great job! That look grueling to do. I appreciate why you did the interior stripping as complete as you did, but I definitely won’t be that thorough with my Tracker. Really enjoying your videos.

[@jejoko]

Man, you are really going to hate that first scratch. Good job.

[@BassBrothersFishingDMV]

So true

[@chriseisele9969]

Great work brother

[@BassBrothersFishingDMV]

Thanks 👍🏾🤙🏾

[@d-arts7139]

great job man. i bought easyoff as some online say it removes paint. didnt do anything for my paint. maybe if the paint surface was rough or worn. ill buy that cleanstrip you used. at least the previous owners only painted the walls, inside and out. im going to leave the rails bare and polish them. they always get chipped and banged up on stuff anyway. i almost bought plywood for my benches, although i didnt want any plywood. then i found old highway signs at the scrap yard. theyre 1/8" and very stiff. glad i found that aluminum! excited to get my project underway!

[@timjohnson1578]

looking great !!!

[@juanvelazquez4490]

Great Job, thank you

[@BassBrothersFishingDMV]

@@juanvelazquez4490 Thanks for watching.

[@tbnationoutdoors-nateeckhold]

Nice job.

[@BassBrothersFishingDMV]

Thanks man.

[@donniecarson3596]

Thank you

[@akbuilder7626]

Another good paint is Duralux Marine. It's like $26 at Home Depot.

[@josephabeytajosephabeyta9305]

... couple of things #1: awesome job, I know what you mean about the 3rd coat...I wouldn't have been able to not think about it if I had only done 2 #2: put a poster or calendar up in that garage Dang(j/k)

[@BassBrothersFishingDMV]

Lol right.

[@gregorywilson7568]

Great video. How many gallons of paint were used?

[@BassBrothersFishingDMV]

Less than 1 gallon

[@gregsteele9002]

Thanks!! I don't have a sprayer and I need to sell my Jon boat

[@charlie8brown]

Were there any other paint brands you were considering? I like totalboat, but the color options aren’t quite what I want.

[@BassBrothersFishingDMV]

You are correct. The color options are limited. I also looked at Sea Hawk, Duralux, Rustoleum and a few others.

[@charlie8brown]

@@BassBrothersFishingDMV awesome. Sea hawk is definitely one I’ve been considering. I’ve heard good things about both them and the total boat.

[@badBrad3]

Awesome man! Great video! I am looking at this paint for my 16’ jon boat that is 52” wide. How much paint did you use for yours?

[@BassBrothersFishingDMV]

A little under a gallon.

[@badBrad3]

@@BassBrothersFishingDMV ok, appreciate it!

[@aaronbrown2862]

Hello I was curious on how much of the TotalBoat Paint You used to paint the boat. Thank You for your Time.

[@BassBrothersFishingDMV]

I used a little more than 3/4 a gallon. 3 coats.

[@aaronbrown2862]

@@BassBrothersFishingDMV okay thank.

[@aaronbrown2862]

@@BassBrothersFishingDMV thank you. For your response. And thank you for your time

[@rboyett]

How many gallons did you use?

[@BassBrothersFishingDMV]

1 and I still have more left over.

[@DowWattsOutdoors]

What size boat, and what is the length of the load rite trailer?

[@BassBrothersFishingDMV]

That's a Lowe 1436. Not sure the total length of the trailer.

[@DowWattsOutdoors]

Ok. It looks like it’s a 16 foot boat trailer. So a total of about 18 foot.

[@blazedub3333]

How has the paint held up so far?

[@BassBrothersFishingDMV]

Good but this color gets dirty easy since it's so light.

[@blazedub3333]

@Bass Brothers Fishing DMV but no chipping/wearing off? I think this is the route I'm going to go but haven't been able to find much on how durable it is

[@stubbsmuffin]

How much paint did you use inside and out?

[@BassBrothersFishingDMV]

A little less than a gallon

[@renkenshaw]

I followed the instructions perfectly and had terrible results. It looked amazing, but would scratch off as soon as it made contact with anything. The rubber rollers on my trailer took it straight to aluminum

[@BassBrothersFishingDMV]

Sorry to hear that man. I hope that doesn't happen to me but I'll post an update if it does.

[@Xtermin8er86]

I didn’t hear you mention and off you did sorry for asking again lol. How much paint did it take?

[@BassBrothersFishingDMV]

@@Xtermin8er86 about 3/4th of a gallon.

[@Xtermin8er86]

Ok thank you! Love watching your videos!

[@JP-ew7hq]

One year update? How did it hold up?

[@williamfeuvrel5049]

He sold it, but he made an update video on it before.