Yes... I actually said Mini SD card in the video; so beat you too it, lol!
@saltyd21374 жыл бұрын
It didn't work for me
@NerdGadget4 жыл бұрын
@@saltyd2137 Make sure the micro SD card is empty before adding the .bin file.
@smilenownyc3 жыл бұрын
@@saltyd2137 Try it again and make sure you have the correct version and you renamed to demo.bin It worked on the first try for me. Step by step worked like a charm. thanks @mobile WizTech
@KC-bz7eb3 жыл бұрын
OMG, your explanation was way easier than the customer service tech from the wyze company itself. Thank you
@NerdGadget3 жыл бұрын
You are very welcome. Please help me by sharing, liking, and subscribing.
@hernldr82 жыл бұрын
I wish that I had seen this sooner! Wyze customer service couldn’t help me and said that the camera had failed and that my only choice was to replace the camera. Your fix worked perfectly on my V2. Thanks for the instruction.
@NerdGadget2 жыл бұрын
So happy that worked for you. Please help me by subscribing, sharing, and liking too.
@matt1232313 жыл бұрын
A little disappointed that i threw two cameras out before i found this video but lucky still had another two laying around.The fix worked and all due to the simplicity of the explanation. Thank you so much for the information as it saved me from spending good money over bad..SUBSCRIBED!
@NerdGadget3 жыл бұрын
I truly appreciate it and glad to help! Please share and like as well.
@Looney214 жыл бұрын
I was on the phone with Wyze for over 2 hours trying to fix this problem!! Your 7 minute video fixed it!!!
@NerdGadget4 жыл бұрын
That's awesome and thank you very much for sharing that. I am glad my video helped you out. Please help me by subscribing, sharing, and liking my video too.
@tamluh4 жыл бұрын
Had to dust off my old laptop but it worked like a charm. Thanks a bunch for the easy step by step instructions.
@NerdGadget4 жыл бұрын
You are very welcome. Please help me by sharing, liking and subscribing too.
@rsbicki96452 жыл бұрын
THANK YOU Moblie WizTech!! You fixed my problem!! Not even the Wyze support team could help me with this and I was ready to send back my camera to them. Your instructions were super easy to follow and you talked at a nice pace (and no annoying background music)...kudos to you. One thing I ran into was I accidentally flipped on the write protection tab on my SD card adapter and it took me a few tries to finally figure out what I did wrong there. But great video, thanks!
@NerdGadget2 жыл бұрын
Awesome and glad my video helped you. Please help me by subscribing, liking, and sharing too.
@smilenownyc3 жыл бұрын
i bought this cam used (open box) and i could not get it connected. It turned on and eventually just died "bricked" with yellow light. I watched this video and it was right to the T.. I was able to get my cam running with no issues! Vey happy to have done this. I ware really regreting and resenting that i saved a few dollars on the camera buying it open box. FIXED and operational. Subscribed! great vid.
@NerdGadget3 жыл бұрын
Glad my video helped you get your cam work! Thanks for the sub as well!
@omgedson423 жыл бұрын
Wyze pan got bricked after a huge lightning storm. Turns out the card that was in it got fried, got a new card, and followed your instructions. Thanks for the fix, SAVED!
@NerdGadget3 жыл бұрын
You are very welcome. Please help me by sharing, liking, and subscribing too.
@dougmehnert47272 жыл бұрын
Did you just disassemble the body of the camera to access the internal card? Was that another microsd card? I'm having a similar issue where this solution isn't helping me and i wonder if the internal card is toast. @omgedson
@omgedson422 жыл бұрын
@@dougmehnert4727 nope, just the common card that you pop into the slot. Confirmed it was fried, not even my computer was able to read it.
@malw3 жыл бұрын
After inserting the card, I had to try unplugging/plugging and pressing the setup button several times, but it eventually worked. Thanks!!
@NerdGadget3 жыл бұрын
You are welcome. Please share, like, and subscribe too.
@griffmustard4 жыл бұрын
This is what KZbin is all about. Excellent Information. Thank You so much for Sharing Bro.
@NerdGadget4 жыл бұрын
You are very welcome and thank you for the positive comment. ease help me by sharing, liking and subscribing too.
@amiller3710 Жыл бұрын
Thanks...sooo much for this tutorial. My light was constant yellow and I was totally perplexed. You are my HERO...thanks Now my cam is programmed and I have security 😂
@NerdGadget Жыл бұрын
That is so awesome, and I'm glad my video helped you out. Please help me by subscribing, liking, and sharing as well.
@KennethHale402 жыл бұрын
OMG! Thank you soo much. I did exactly as you said and it took a few minutes and I was like...ugh it didn't work. Then it kicked in and we are back online. Great video.
@NerdGadget2 жыл бұрын
So glad it worked for you. Please help me by subscribing, likinkg, and sharing as well.
@maximpulse3 жыл бұрын
I had to repeat the process twice, but it worked! One I got the blue/yellow blinking lights I pressed the rest button and went through the add a cam pan process but it kept telling me it couldn't find my network. But after a few times cancelling and going through that process suddenly it says setup completed. It doesn't have to make sense if it works! And it working perfectly again. Thank you! And I did click Like.
@NerdGadget3 жыл бұрын
You are welcome. Please help me by sharing, liking, and subscribing too.
@subhashjoshi59872 жыл бұрын
Very good explanation, my cam v2 was offline for a long, but now it's back online. Thanks. My camera went thru red/blue blinking and straight to solid blue and had a hiccup during reconnecting, no voice prompt for -ready to connect- but finally it did connect on rebooting.
@NerdGadget2 жыл бұрын
That's awesome that it started working and glad video helped you out. Please help me by subscribing, sharing, and liking too.
@RobLeDrew4 жыл бұрын
If I could give you more than one like, I would. Thanks a bunch, saved me from buying a replacement.
@MartinV.2 жыл бұрын
worked for me. other videos said to use an older firmware but this one said to use the most current firmware for the camera and it finally worked
@NerdGadget2 жыл бұрын
So glad my ideo helped you . Please help me by subscribing, sharing, and liking as well.
@user-nd7rd8jo6h2 жыл бұрын
Had this happen and wyze sent me a new one and then it happened to the new one so got a micro on the way for 8$ and once it arrives I'll have 2 working cameras. Thank you.
@tylercragun36392 жыл бұрын
the best video explaining how to fix the issue. Thank You!!!
@NerdGadget2 жыл бұрын
So glad my video helped you out. Please help.me by subscribing, sharing, and liking too.
@GregMagnusAIM2 жыл бұрын
That worked! Thanks for posting. I was about to throw the Wyze Cam Pan away after reading the support available from Wyze. You rock!
@NerdGadget2 жыл бұрын
Glad my video helped put. Please help Mr by subscribing liking, and sharing too.
@subarumanrp2333 жыл бұрын
Still got the solid yellow on my cam pan..have not been able to get this fix to work yet..!WAIT! I TRIED A 1GIG CARD BRAND NEW AND IT WORKS! THANK YOU!
@NerdGadget3 жыл бұрын
You are welcome. Please help me by subscribing, sharing, and liking.
@tgiordano Жыл бұрын
THANK YOU! The documentation on Wyze's website does not include renaming the .bin file. You just saved my device! :)
@NerdGadget Жыл бұрын
So glad my video helped you out. Please help me by subscribing sharing, and liking as well.
@tgiordano Жыл бұрын
@@NerdGadget Done!
@NerdGadget Жыл бұрын
@@tgiordano Thanknyou very much.
@LucasCosta0003 жыл бұрын
Great tutorial altogether... Thanks mate, you saved my cam (it's been frozen for at least a year, maybe more... Decided to give one more try by searching on youtube and found your help!)
@NerdGadget3 жыл бұрын
You are welcome and glad my video helped. Please help me by subscribing , liking, and sharing too.
@michaelscafedi86304 жыл бұрын
Thank you very much. It worked for me. Save me from buying another Wyze Pan Cam. Very good video.
@NerdGadget4 жыл бұрын
You are very welcome. Please help me by subscribing, like, and share video too.
@subashanitha3 жыл бұрын
Thanks. This was helpful. I had to format the SD card using disk utility on Mac. Just deleting all the files in the drive didn't work.
@LisaHerman19633 жыл бұрын
Thank you SOOOO much!!! I thought I was going to have to buy a new camera as other videos did not help me fix it. Luckily I came upon yours. It fixed it!!! You have a new subscriber and a very happy person right now. lol THANKS :)
@NerdGadget3 жыл бұрын
That's awesome and glad to help you out. Also thank you for subscribing too. Please help me share and hit the like button if you have not already.
@lrwilliamsjr4 жыл бұрын
Dude...your voice is incredible!
@NerdGadget4 жыл бұрын
Very much appreciated!
@kalvinK2 жыл бұрын
wyze should hired you you underdtand more than they do god bless you
@NerdGadget2 жыл бұрын
I truly appreciate that and I'm glad that worked for you as well. Please help me by subscribing, liking, and sharing too.
@ben23guzman4 жыл бұрын
I have been trying to figure this out for weeks now. Thank you
@NerdGadget4 жыл бұрын
You are surely welcome. Please help me by sharing this, hitting like, and subscribing too.
@richardallenjohnsonjr50143 жыл бұрын
How long are you supposed to hold the button? mine still is solid yellow
@CaptainAubry2 жыл бұрын
Outstanding video of a solution, great work around and technical expertise on the subject, live long and prosper 🖖
@NerdGadget2 жыл бұрын
So glad my video helped you. Please help me by subscribing, liking, and sharing too.
@rayceballos83163 жыл бұрын
Worked like a charm... Once setup of the update remove the SD card to continue camera setup, thanks brother...
@NerdGadget3 жыл бұрын
You are very welcome. Please help me by sharing liking, and subscribing too.
@anythinggoes41502 жыл бұрын
Thanks for the tip will try it tonight. 👍
@NerdGadget2 жыл бұрын
I hope it works for you! Please help me by subscribing, liking, and sharing as well.
@pilaralvarez88083 жыл бұрын
Hi. Tried it. Got to the blue and yellow light but then it returned to the steady yellow light 😞
@joenj3834 жыл бұрын
Thank you for making the video. Worked like a charm for me.
@NerdGadget4 жыл бұрын
You are very welcome and glad to help. Please help me by sharing this video, hitting like, and subscribing too. Hit that notification bell too if you don't mind. Thank you
@HughSchsllies3 ай бұрын
Awesome, thank you so much it worked 100%
@NerdGadget3 ай бұрын
@@HughSchsllies I am so glad my video helped you. Please help me by subscribing, liking, and sharing as well.
@kalvinK2 жыл бұрын
you are smart you fixed my issue and my camera is working now thank you so much
@NerdGadget2 жыл бұрын
You are very welcome and glad to help. Please help me by subscribing, liking, and sharing as well.
@melchgarnicajr57982 жыл бұрын
I was about to trash this camera. Thanks for the info.
@NerdGadget2 жыл бұрын
So glad my video saved your camera. Please help me by subscribing, sharing, and liking as well.
@TianJiang963 жыл бұрын
Connection failed fixed. Thought I need to buy a new one. You save me $38. Thank you.
@NerdGadget3 жыл бұрын
Please help me by sharing, liking, and subscribing too!
@SRSBZZ4 жыл бұрын
This worked on my wyze cam v2, thanks!
@NerdGadget4 жыл бұрын
You are very welcome and glad it worked. Please help me by sharing, liking and subscribing too!
@oasisoutfitters36513 жыл бұрын
Thanks worked at the First Attempt
@NerdGadget3 жыл бұрын
Great. Please help me by sharing, liking, and subscribing too.
@pinetopthomas41002 жыл бұрын
Awesome video man... thanks, fixed me right up.
@NerdGadget2 жыл бұрын
So glad my video help you out. Please hrlp me by sharing, liking, and sharing as well.
@Roxxboise2 жыл бұрын
Wyze support is a joke. They told me there was no hope for my camera, and to buy a new one. This fixed mine.
@NerdGadget2 жыл бұрын
So glad this fixed your issue and you were ae to follow the steps asxwell. Please help me by subscribing, liking, and sharing too.
@HaCaVa3 жыл бұрын
This worked for me!!! THANKS!
@NerdGadget3 жыл бұрын
Awesome,; please help me by sharing, liking, and subscribing too.
@Sifuj8243 жыл бұрын
Fixed my V2! Much appreciated! 🙏🏼
@NerdGadget3 жыл бұрын
You are very welcome. Please subscribe, share, and like too.
@Marcoslemedeoliveria4 жыл бұрын
thank you so much ! your explanation was very helpful !!!!!
@NerdGadget4 жыл бұрын
You are very welcome. Please help me by sharing, liking, and subscribing too.
@mikewolf77232 жыл бұрын
So I bought a new Cam Pan 2 and it’s had a solid red light since opening the box. Will this fox that issue?
@stuckigs4 жыл бұрын
ok 8th time was the charm, working like new now. Thank you
@christianbrumbaugh2064 жыл бұрын
It did not work for me unfortunately. The cam started with a solid yellow, and once have installed the firmware on the SD card, and following the steps, the cam turned on, and had a solid blue/yellow color. Left it sit for a while, and no changes. Any advice?
@NerdGadget4 жыл бұрын
You were halfway there. I would try to go through the steps once again and see if that works. Also make sure nothing is but that file is on the Micro SD card. Also please make sure to rename the file just as mentioned in my video.
@scottborn68372 жыл бұрын
That is what happened to one of mine. Three worked with this, one just sat on blue/yellow. I tried many times.
@harmlesskarl4274 жыл бұрын
how do you like them? seems affordable yet functional!
@NerdGadget4 жыл бұрын
Love them! Yes very affordable, reliable, awesome quality, features too!
@mattwalker4134 жыл бұрын
Worked like a charm. Thank you!
@NerdGadget4 жыл бұрын
Awesome... please help me by sharing, liking, and subscribing too!
@georgecoconuts95274 жыл бұрын
Worked like a charm, much apreesh
@NerdGadget4 жыл бұрын
You are very welcome. Please make sure to hit like, share, and subscribe too.
@travisaleric57032 жыл бұрын
Super helpful thank you!
@NerdGadget2 жыл бұрын
You are very welcome. Please help me by subscribing, liking, and sharing as well.
@VinnyFree4 жыл бұрын
worked like a charm!! Thanks for this!!
@NerdGadget4 жыл бұрын
You are very welcome. Please help be by liking, sharing and subscribing too.
@kaceywells4 жыл бұрын
You’re a good man! This worked for me brother! Thank you!!!!
@NerdGadget4 жыл бұрын
You are very welcome and glad it helped. Please help me by sharing, liking, and subscribing too!
@jasonkershaw31982 жыл бұрын
I have a pan that’s has this issue. Could I use an sd card from a different pan that hasn’t been set up yet?
@BargainBarnShow4 жыл бұрын
What a great tutorial, thank you for that!
@NerdGadget4 жыл бұрын
You are very welcome, please help me by hitting like, share, and subscribe too!
@marcelodovidio25902 жыл бұрын
you are THE BEST THANKS
@NerdGadget2 жыл бұрын
So glad it worked for you. Please help me by subscribing, liking, and sharing as well.
@NoobtasticGaming4 жыл бұрын
worked like a charm, ty
@JoeGrober2 жыл бұрын
Did what you said. Still Solid Yellow Light.
@mschroeder9556 Жыл бұрын
Me to.
@christianilles359 Жыл бұрын
@@mschroeder9556 me 3\
@russgoliger14853 жыл бұрын
You are amazing! Thank you for saving my sanity.
@NerdGadget3 жыл бұрын
Please help me by sharing, liking, and subscribing as well!
@hmong3373 жыл бұрын
thanks so much this helped me tremendously! liked and subbed.
@NerdGadget3 жыл бұрын
Thank you very much and please share as well!
@leovo42553 жыл бұрын
Thank you very much. It help fix my cam 100%.
@NerdGadget3 жыл бұрын
You are very welcome! Please help me by subscribing, liking the video, and sharing as well!
@hboy407ful4 жыл бұрын
Thanks man totally worked
@NerdGadget4 жыл бұрын
You're very welcome. Please make sure to share, like, and subscribe too!
@TS1752 жыл бұрын
Hey Bruh, your hands look superb. You should definitely consider being a hand model. Peace
@NerdGadget2 жыл бұрын
I never knew that hand models was a thing but truly appreciate your possitive comment!
@jennyreyes24983 жыл бұрын
This vídeo safe me so much...
@NerdGadget3 жыл бұрын
That's awesome!!! Please help me by sharing, liking, and subscribing too.
@MorrisMcD23 жыл бұрын
Unfortunately this didnt work for me :( How long did you have to press reset for? I never get anything other than a solid yellow.. :( I tried doing with the last two firmware updates but nothing here. Any further advice appreciated. Liked video as it certainly gave me something to try. Thanks!
@NerdGadget3 жыл бұрын
You press it for about 10 seconds or so... you should get those lights. Also make sure you start with the cam unplugged, press and hold the button, and the plug it in while still holding until both lights are flashing.
@zabdieltorres4361 Жыл бұрын
Thanks this solve my cam
@NerdGadget Жыл бұрын
Awesome, and glad my video helped you out. Please help me by subscribing, sharing, and liking as well.
@vitodigiorgio87334 жыл бұрын
God Bless, actually worked thank you so much!!!!
@NerdGadget4 жыл бұрын
Thank you very much. Please share, like, and subscribe too!
@amar.androidacc9 күн бұрын
Hi, does the light stay "blue+yellow" for 5 minutes until cam reboots ? On my pan v1 the "blue+yellow" light changes to solid yellow in 40 seconds and cam doesn't even reboot just click sounds, stuck in solid yellow forever. Thanks.
@NerdGadget9 күн бұрын
@amar.androidacc Once you have the blue and yellow light , just let it do its thing for about 3 minutes, and then it will reboot on its own. After the reboot, it should return back to the normal state.
@djquixx4 жыл бұрын
Thanks this helped!
@NerdGadget4 жыл бұрын
You are very welcome. Please help me by hitting like, share, and subscribe.
@LuisPerez-ck2ol3 жыл бұрын
Thank you ☺️
@NerdGadget3 жыл бұрын
Ypu are welcome. Please help me by sharing, liking and subscribing too.
@migzsanmiguel4 жыл бұрын
I almost got it to work, but camera can't connect to the wi-fi , took a break but when i tried it again it was back to the way it was ... just the solid yellow?
@NerdGadget4 жыл бұрын
Try doing it again and wait for the light to turn off. Once it turns off, give it a few minutes, then just do a factory reset by holding done the setup button until it says ready to pair. Then set it up again.
@migzsanmiguel4 жыл бұрын
@@NerdGadget Will give it a try, so no need to re do the sd card?
@NerdGadget4 жыл бұрын
@@migzsanmiguel I would check to make sure nothing but but the .bin file is on the card and the go through the whole process again. Then once the blue and yellow light turn off... do a factory reset.
@migzsanmiguel4 жыл бұрын
@@NerdGadget Patience is the key! It finally connected! Thanks a bunch Bro!
@NerdGadget4 жыл бұрын
@@migzsanmiguel You are surely welcome and glad it worked for you. Please help me by sharing, liking, and subscribing too!
@shawnhemmingsen95154 жыл бұрын
So I did all this and got the blinking yellow and blue light but my camera isn't reseting?? What should I do?
@NerdGadget4 жыл бұрын
Please make sure that the micro sd card only has the downloaded file and that you renamed that bin file correctly.
@shawnhemmingsen95154 жыл бұрын
@@NerdGadget damn i missed that, going to try that now. I truly appreciate the help🙏🏾🙇🏾♂️
@NerdGadget4 жыл бұрын
@@shawnhemmingsen9515 You are very welcome. Please make sure to share, like, and subscribe too!
@edilbertogarcia83033 жыл бұрын
Thanks this fixed mine
@NerdGadget3 жыл бұрын
Awesome! Please help me by sharing, liking, and subscribing too!
@keilango8654 жыл бұрын
Any other recommendations to get the camera to connect. I received it today brand new and a new SD card. I’ve tried all the steps you provided and it still will not connect.
@NerdGadget4 жыл бұрын
Try doing all the steps again and ensure nothing is on the micro SD card but the .bin file. Once you see blue and yellow lights turn off... give it a few minutes or so. If it still not connecting... do a factory reset by by pressing the "Setup" button until you hear the voice prompt for setup. Then just set it up again.
@JTmoney24243 жыл бұрын
So you have to get a blank micro SD card before you start this I take it?
@NerdGadget3 жыл бұрын
Yes or use your existing one by temporaryly removing the content off of it.
@Taylexwow3 жыл бұрын
I used this today on a Wyze Cam Pan that was bricked out of the box. After I called for a warranty replacement they said they didn't want the camera back so I was like "Well, if I can't get it to work its already broke." The replacement comes in a couple days and the first camera is now working
@NerdGadget3 жыл бұрын
Awesome... that actually happened to me as well! Please help me by sharing, liking, and subscribing too.
@bean9005 Жыл бұрын
how long do you have to hold it down?
@NerdGadget Жыл бұрын
For like 5 second or until you see the light flashing.
@mirandadicus89293 жыл бұрын
I have the latest firmware already do I still need to do this? I'm getting error 90 and solid yellow light I've tried to unplug and repower on and it's not working 😢
@NerdGadget3 жыл бұрын
Yes, you still have to in order to unbrick it.
@Atypicalkid886 ай бұрын
Im at my witts end 😅 I have tried 4 different firmwares on my wyze cam v2 and I do the process step by step and it goes to the light blue light for like a minute and then straigh back to solid yellow/orange. I don't know what else to do 😓
@Atypicalkid886 ай бұрын
I have tried different cables, different bricks, different firmwares and formating the microsd card onto fat32. Sigh maybe it's time to buy another one? 😢
@NerdGadget6 ай бұрын
@Atypicalkid88 This has happened to me before as well. Try and let the cam stay powered off for about 5 to ten minutes and then try again.
@richardallenjohnsonjr50143 жыл бұрын
I also use 4.10.6.218 November 2020 version should I use a different version
@islamnossir323 жыл бұрын
thank u!
@Jameson77777 Жыл бұрын
The app prompted me to do a firmware update and 2 out of my 3 cameras are now bricked. I’m not sure if I’m doing something wrong but this trick isn’t working for me. The blue light comes on, followed by the yellow light and nothing happens from there.
@NerdGadget Жыл бұрын
Are you adding the file to the Micro SD card while it is empty. If not, backup the Micro SD card, make there is nothing on the card, go through the steps, and then see if that works. If so, you can then add the files back on the card afterward.
@prathikh91943 жыл бұрын
I have a doubt regarding this...can we use 8gb micro-sd card or 32gb is recommended
@NerdGadget3 жыл бұрын
You can use an 8GB card as the file is very small. There is no need to doubt as you can see from the comments... including myself that it works.
@prathikh91943 жыл бұрын
@@NerdGadget Thank you ...if i have any doubts i will talk.
@raymonyxzenyxo43663 жыл бұрын
Amazing
@NerdGadget3 жыл бұрын
Please help me by subscribing, liking, and sharing.
@user-gn5mh2uu5x3 жыл бұрын
No yellow light still :(( also can i use my data or do i needwifi home??
@NerdGadget3 жыл бұрын
Make sure the Micro SD card only has the file in it and nothing else. Regrading the network, I believe its going to be home Wi-Fi only but not sure.
@adekat20125 ай бұрын
awesome video, i followed everything to a t, proper file and rename.. no luck.. i will try with a smallwe sd i used 256 gb card. Either way.. Still not working. They stopped working after i did the firmware update
@NerdGadget5 ай бұрын
Try letting it stay powered off for a few hours and the try again.
@TheToddstrite3 жыл бұрын
My Cam Pan appears to be completely bricked. I have followed all steps, multiple times and I get as close as a solid yellow/blue light after a short time the blue will go out and it stay a solid yellow.
@NerdGadget3 жыл бұрын
Please make sure your micro SD card was empty before adding the file.
@TheToddstrite3 жыл бұрын
@@NerdGadget I have multiple brand sd cards, formatted and I even broke out a brand new unused card.
@yoelnoya3 жыл бұрын
@@TheToddstrite the same is happening to me... :(
@TheToddstrite3 жыл бұрын
@@yoelnoyaSorry, Good Luck
@uzairsaqlain2 жыл бұрын
Exact same thing happening to me, stays at blue/yellow light
@melchgarnicajr57982 жыл бұрын
Can you add more then 32GB?
@NerdGadget2 жыл бұрын
I believe 32GB is the max for Pan V2, but could be wrong there.
@kelseydelanoy7782 жыл бұрын
I tried it a few times, and it did not work. The light went from solid yellow, to now blinking yellow. I also have the Pan version and wasn't sure if it was the v2 or not so I tried to download both on the mini SD card and try each one separately, but still no luck. Any ideas?
@NerdGadget2 жыл бұрын
Make sure that the Micro SD card does not have anything but the .bin file on it before you start.
@kelseydelanoy7782 жыл бұрын
@@NerdGadget Yes, I made sure to clear the card so it was empty. And I deleted all text so it was just demo.bin. I am wondering if I need to try to reconnect it to my Wifi? When i hold down the button, I am not getting any blue light.
@NerdGadget2 жыл бұрын
@@kelseydelanoy778 Havd you tried holding down the button a little longer.
@kelseydelanoy7782 жыл бұрын
@@NerdGadget When I hold it longer, the voice comes on saying "ready to connect"
@ibrahimkhalil-qw6vf Жыл бұрын
can i use a USB stick instead of a micro sd card?
@NerdGadget Жыл бұрын
No, it has to be a MicroSD card.
@jakel34243 жыл бұрын
Ty.. worked.
@NerdGadget3 жыл бұрын
Awesome! Please help me by sharing, liking, and subscribing too.
@wren2142 жыл бұрын
I’ve tried to force reset, tried flashing the firmware. Has done nothing. I’m thinking that the reset button is broken
@NerdGadget2 жыл бұрын
Make sure you are pressing the tiny button.
@rayceballos83163 жыл бұрын
Hi, worked... but I had the same issue again, and went through the whole process, I have a blue light and good signal strength but but I get a "disconnected from wifi" error. Not worth the effort
@NerdGadget3 жыл бұрын
You know may need to just do a plan factory wipe on it now since it is no longer bricked.
@TonyFromarty4 жыл бұрын
Great, thanks!
@NerdGadget4 жыл бұрын
You are very welcome. Please help me by sharing, liking and subscribing too.
@michaelgonzalezrivera2 ай бұрын
Can someone tell me if this works using a USB memory? I tried and failed..
@DJBURNRK4 жыл бұрын
Hi, still solid yellow.. Not working pls advise..
@NerdGadget4 жыл бұрын
Please make sure your Micro SD card gas nothing but that renamed .bin file in it and then try the steps again.
@uzairsaqlain2 жыл бұрын
Didn't work for me. I formated the sd card, downloaded pan cam firmware, rename it (demo.bin), put it in camera, power, held setup, it turns to blue/yellow light and then just stays there even after leaving it for hours. Multiple tries, different sd cards, still the same. Any ideas?
@NerdGadget2 жыл бұрын
After going through the steps again... let it blink for few minutes... unplug it for 10 seconds and then try accessing it from the app.
@uzairsaqlain2 жыл бұрын
@@NerdGadget It never blinks. stays solid blue/yellow
@NerdGadget2 жыл бұрын
@Uzair Saqlain Ok see what happens after letting it sit for a few and the power off for 10 seconds and then back on.
@nathanpotter85693 жыл бұрын
well, I tried, bought this on clearance, didn't notice that the package was open. it is bricked. tried several times, tried every single firmware including the one you showed, tried formatting the card, nothing worked. I was hoping but I guess there is more wrong with mine.
@NerdGadget3 жыл бұрын
Make sure to choose the firmware that pertains to your cam or you could create another issue. Are you able to get to the point where the light is showing blue and amber?
@nathanpotter85693 жыл бұрын
No I wasn't, I have the same camera as you showed. I called support, I'm going to try to get a replacement, I replaced the power supply and cord with a working camera, and still didn't work
@NerdGadget3 жыл бұрын
@@nathanpotter8569 Does it power on at all?
@nathanpotter85693 жыл бұрын
Yes i get a solid yellow, about 5 to 6 seconds doing your method I hear a click... but that's it. Customer support is sending me a new unit.
@NerdGadget3 жыл бұрын
@@nathanpotter8569 Ok 👍🏾. You should have seen a blue and yellow light. Who knows... you may end up with 2 working ones. That's what happened to me. Are you pressing the reset button down before plugging it in and keeping it held down until the light comes on? Again it should be blue and yellow.