How to Gold Plate on to Stainless Steel

How to Gold Plate on to Stainless Steel
go.magik.ly/ml/bhjk/
Please subscribe and thumbs up and if you don't like it well do it anyway every little helps
thanks
check out my ebay shops goldandsilver01 and my website all about Gold and Silver plating you can get plating kits and do it yourself
www.goldensolution.co.uk
www.ebay.co.uk/usr/goldandsilv...
www.ebay.co.uk/usr/kurttom007
thanks
Uwe Klinkmuller

[@Sir_knight_trooper]

I will love doing this to some armor

[@admiralgoodboy]

How about gold plating a knife, do you know if this gold plate works on pattern-weld steel, brass, and nickel?

[@GoldenSolutionPlating]

yes it will on nickel you can plate gold directly on brass you need to nickel plate first and on weld steel you may have to copper and nickel plate first thanks

[@carriebtc]

Great informational video. Do you know how toxic or dangerous is the manipulation of the chemicals and elements used in the process of gold plating at home? I see you're wearing some rubber gloves, but, because of the camera angle, I can't see if you're also wearing a protective mask (for the chemical fumes) of some sort. Please advice. Cheers

[@GoldenSolutionPlating]

carriebtc The gold and silver plating is not toxic at all and I do not wear any mask If you do chrome stripper that’s toxic yes

[@carriebtc]

@@GoldenSolutionPlating Thank you for the reply. Feel much better now. Cheers

[@joeganic773]

i want to make my own metal straws and gold plate them. do u think this would be safe to drink out of becuase i know some metal can be toxic

[@GoldenSolutionPlating]

hi yes you can get stainless steel straws and gold plate them and yes you can use them thanks

[@lourdesderivera7696]

Hi I wanted to purchase a gold plated stainless steel necklace from a store I was wondering if the gold would be able to go in water or will it fade away over time also would stainless steel be capable of going in water without rusting or tarnishing I’ve been getting different answers

[@GoldenSolutionPlating]

hi yes you can go in the water no problem if the plating is very thin it will wear off or can also tarnish depending what the base metal is as gold never tarnish stainless steel dose not rust so you can go in the water as well yes thanks

[@bobbyclark6395]

I can’t seem to find the right site on buying supplies to do this. Any recommendations on where to go?

[@GoldenSolutionPlating]

www.goldensolution.co.uk

[@geralddomingo8860]

If I already have a gold plated one , how do i turn it back to its original color?

[@GoldenSolutionPlating]

polish it

[@a.m1003]

Hi! I want to gold plate the blades on my figure skates, any tips on how to do that?

[@GoldenSolutionPlating]

what material is it

[@DertexVR]

@@GoldenSolutionPlating you’ll never know

[@thisthatbullshat7141]

Does this work on solder? It’s typically made of tin and lead.

[@GoldenSolutionPlating]

yes but i would nickel plate it first thanks

[@jamichaelwilliams1265]

I bought some 18k Gold plated jewelery good? its stainless steele based.... Also PVD plated.... Which is better... Brush or PVD? Plz reply

[@GoldenSolutionPlating]

depending if you plate a thick layer of gold like 3 plus microns gold would be better but normally pvd last longer if you compare it to a gold plating of less than 0.5 micron thanks

[@JM-gu3tx]

How many volts are needed for a 6 inch bronze or brass candlestick? Thank you kindly.

[@GoldenSolutionPlating]

about 4.5 volt for gold plating and 3.5 volt for silver plating thanks

[@simonelloyd5023]

I want to get this for jewelry making. What all will I need?

[@GoldenSolutionPlating]

you need a plating Kit here is a link thanks www.goldensolution.co.uk/collections/frontpage/products/gold-plating-kit

[@joshuamiller852]

So this would work on some stainless steel bolts?

[@eugenerutenberg5281]

hi. do you have an idia how to plate a verry small items, like screws?

[@richardmathers7238]

What do you use to thicken gold solution?

[@GoldenSolutionPlating]

Thickener you can get from spa plating www.Goldn.co.uk

[@swaysway451]

I have a question if I have a kitchen sink that I want to plate over as gold is this something you can do?

[@GoldenSolutionPlating]

Well depending what material it is

[@swaysway451]

It’s stainless steel if it’s possible for you to do I can send you the dimensions of it and let me know how much it would cost and I’ll ship it 👍

[@swaysway451]

And how long it would take I can overnight it and have it overnight back once it’s done. It’s for a customer of mines I do a lot of work for. I’ve had no luck in finding a sink that has his shape in gold.

[@GoldenSolutionPlating]

@@swaysway451 ok send me an email with pictures and size to [e-mail] thanks

[@ALEXANDERCRETA1]

Hello sir i want to make gold aluminium parts gor my motorcycle can you send me a link what to buy? Thank you!

[@GoldenSolutionPlating]

have a look at spa plating

[@1originalhaley]

Is it possible to plate a handpan like this?

[@GoldenSolutionPlating]

Yes

[@cooper3795]

Great video. Is there a way to gold plate stainless steel without using Wood's Nickes Strike ?

[@GoldenSolutionPlating]

yes i don't use nickel strike

[@cooper3795]

@@GoldenSolutionPlating thank you for replying. What do you use exactly ? If you could leave a link to the product I'd appreciate it.

[@GoldenSolutionPlating]

Jeff from New York proud owner of a 4670K I use mpu as you can see in the video www.goldensolution.co.uk/collections/plating-chemicals-and-polish-mpu-meta-seal-activator-cleaner-chrome-stripper/products/mpu-compound-100ml If you do tank plating it’s a different story you may need nickel strike

[@user-oo5sv3yw5g]

​@@GoldenSolutionPlatingثري

[@castrokreme]

How long does delivery take to the United states

[@GoldenSolutionPlating]

Hi depending on the service what i use but at the moment between 4 and 10 days normally 3 to 5 days thanks

[@ARCSTREAMS]

do i need to nickel strike stainless before copper plating?

[@GoldenSolutionPlating]

ARCSTREAMS as you can see in the video I plate directly on to stainless steel You may need to when you tank plate Thanks

[@ARCSTREAMS]

you gold plated,,im talking about copper plating directly to SS,,i tried and it does not work ,rubs off ,so i am asking you can you copper plate ss directly or does it need some kind of preparation?

[@ARCSTREAMS]

and you used something called pmu so i would not say you done it directly

[@GoldenSolutionPlating]

ARCSTREAMS oh sorry Yes you need to nickel strike or gold flash before copper plating

[@GoldenSolutionPlating]

ARCSTREAMS it is directly because the mpu is a cleaning and activating compound as a replacement for cleaner and activator

[@user-ez2yt4mk1d]

You are good men thanx can I use that at gun I want Mike my postal gold

[@GoldenSolutionPlating]

gold plating a gun i guess you can depending what they made of thanks

[@Smileboiy]

I want to plate some bike parts any advice on how to do so

[@GoldenSolutionPlating]

ss ss what are they made of

[@Smileboiy]

@@GoldenSolutionPlating Im not too sure, its a lowrider bicycle. I wanna plate the handle bars,fork,rims, im guessing its iron but idk to be honest

[@GoldenSolutionPlating]

you need a plating kit www.goldensolution.co.uk/collections/frontpage/products/gold-plating-kit you can gold plate on to steel but the best is to plate very thick with copper and nickel because of rust protection you need to do this in a tank you can plate gold directly on to steed but it can rust thanks

[@charlenemcdermid915]

Can you gold plate silver?

[@GoldenSolutionPlating]

gold plate on to Silver yes no problem thanks

[@RobstarLight]

what is 'thickener' - where do you get it|?

[@GoldenSolutionPlating]

you can get it from spa plating

[@jandebuyssere]

@@GoldenSolutionPlating do you really need the thickener? what effect will it have not using it?

[@GoldenSolutionPlating]

Jan De Buysser Lin you don’t need it it helps for plating items what you can’t remove that the gold is not running away

[@jandebuyssere]

@@GoldenSolutionPlating oke, wel i want a old brass (warn down) kind of look for my stainless steel, its for garden furniture, any tip's?

[@shikhersarraf2019]

On bike parts? Do they corrode afterwards? Silencer ,rim etc

[@GoldenSolutionPlating]

depending what material you plate on to as gold never tarnish or corrode however if you plate a thin layer of gold on to steel it will rust under the gold but if you plate on to stainless steel that will never corrode thanks

[@sohaibaamer]

What is the pink thing you use?

[@GoldenSolutionPlating]

gold solution

[@nemod3338]

Yogurt

[@GoldenSolutionPlating]

@@nemod3338 its the cobald in the solution

[@thecheckroom8900]

How long last the gold plated in stainless steal cutlery?

[@GoldenSolutionPlating]

depending on the plating thickness the longer you plate the thicker is the plating we talking about 0.5 to 3 microns

[@lifeofmaximus8408]

How much to buy the whole set up??

[@GoldenSolutionPlating]

Around £270. Have a look at www.goldensolution.co.uk

[@DocM.]

Can an all Stainless Steel Claddagh ring be 2 tone plated? Only some parts of the ring get 24k gold plating, and the rest of the ring stays Stainless Steel? If possible, what would that cost on average?

[@mohamedayazshaikh5510]

We want to plating golden coating on abs beads

[@GoldenSolutionPlating]

Mohamed Ayaz Shaikh You need to use conductive paint first Have a look at my other videos Copper plating

[@patsymcardle4514]

whats the name of your ebay store ?

[@GoldenSolutionPlating]

Goldensolution01

[@mohamedayazshaikh5510]

Sir can we plating on abs beads in barrels?

[@GoldenSolutionPlating]

Mohamed Ayaz Shaikh No you need to plate them in a copper tank first

[@mohamedayazshaikh5510]

Sir Thanks a lot, but ABS material is already electro conductive and we want to plating golden in barrels

[@GoldenSolutionPlating]

Mohamed Ayaz Shaikh Ok ok I thought it is plastic Sorry I don’t do barrel plating But it should work Thanks

[@lilyeskew3424]

Where can i get a kit

[@GoldenSolutionPlating]

www.goldensolution.co.uk

[@rahulmadhoria4183]

Golden color can be plated on the glass plzz Reply

[@GoldenSolutionPlating]

Yes it’s possible You need to apply conductive paint ink then copper plate nickel and gold plate

[@sarachitamang6840]

If We also proses this wark how much ? minimam cost? Please sir

[@GoldenSolutionPlating]

Contact me on my website wwwgoldensolution.co.uk

[@colinjava8447]

Can you gold plate gold?

[@GoldenSolutionPlating]

+Colin Java yes

[@colinjava8447]

@jeanferdi no point, just wondered if it could be done

[@sinetsko]

Hello! Is it possible to contact you somehow regarding a project I have?

[@GoldenSolutionPlating]

Yes my email is [e-mail] or mobile [phone]

[@jatindermakkar9020]

I'm interested to parcheje this

[@GoldenSolutionPlating]

Hi all my details are here www.goldensolution.co.uk/stores.ebay.co.uk/goldandsilver01 thanks

[@zaynosplay3433]

Sir I can't understand your language batter if you kindly write the formula for rose gold so I will be thankfully of you

[@GoldenSolutionPlating]

I can’t tell you how we make the rose gold solution or any other solution that’s too secret

[@kevinpaulsabat2830]

what are the ingredients of the solution?

[@GoldenSolutionPlating]

water ,gold ,cobalt,cyanide and some other top secret ingredients

[@kevinpaulsabat2830]

@@GoldenSolutionPlating top secret? why share the vid if will still hide something, tnx btw

[@GoldenSolutionPlating]

@@kevinpaulsabat2830 its a video How to Gold Plate on to Stainless Steel and this is what im showing you can buy all the equipment on my website or ebay shop www.goldensolution.co.uk im not gone tell anyone what is in our solution and how its made thanks

[@MauGolf]

@@kevinpaulsabat2830 He is promoting his products

[@roshanaz3651]

How long does it last?

[@thefortressishere]

Hi mate, I have 4 small motors from my model aircraft I would like to do gold. If I where to send them to you in the post would you do them for me? I live in the UK. If it is something you would do I can email you so you could let me know a price. I would send you a picture of the motors first to give you an idea of size. They're only small though. Regards Paul

[@GoldenSolutionPlating]

Hi yes you can email me uweklinkmuller@hotmail,co.uk thanks

[@thefortressishere]

Uwe Klinkmuller Thank you mate I have just emailed you 😀

[@warriorsword7161]

can it shipped to foreign countries?

[@GoldenSolutionPlating]

yes have a look at my ebay shop at goldandsilver01 thanks

[@fun4kids341]

Hello sir I am from India I need one bottle liquid camical what price it is plz give me details

[@GoldenSolutionPlating]

hi have a look on my website here is the link thanks www.goldensolution.co.uk/collections/gold-plating-solution

[@therealityartist9057]

Can metal leaf be electro plated

[@GoldenSolutionPlating]

yes its possible but not easy thanks

[@therealityartist9057]

@@GoldenSolutionPlating thank you for that because the reason I asked you that is because I have made a clay sculpture of tutankhamun and a couple of other things from clay then I cover the whole thing in epoxy resin first then i use real gold leaf to cover them over afterwards then I had a thought if I have to buy a tin of special paint that has metal bits in it too be able to electro plating plastic resin then what is the point of having to buy a tin of paint specifically for electroplating solution when metal leaf will do the same job what do you think any good or not!

[@therealityartist9057]

@@GoldenSolutionPlating you see before I asked you this question about gold leaf i Googled searched it first to find out if metal leaf is a good conductor of electricity and it says yes according to Google search!

[@therealityartist9057]

@@GoldenSolutionPlating i have started using real genuine gold leaf last year and this stuff is stunning to look at but when I saw someone posting things done by electroplating solution it completely blew me away and changed my mind on gold leaf instantly and putting my work too shame when I realized what electroplating is after all these years has totally blown me away because of its brilliant high quality shine and now I myself want to get into this amazing experience with electroplating solution because I use a lot of epoxy resin to make all kinds of things and cover them as well and it says electroplating solution can be done on plastic acrylic as well and epoxy resin is a kind of plastic acrylic at the end of the day and will have to buy this paint for electroplating it says!

[@GoldenSolutionPlating]

@@therealityartist9057 that sounds good and should work thanks

[@Metrowhite]

Is this method called "brush gold plating"?

[@GoldenSolutionPlating]

yes its is called gold brush plating

[@nadadenada319]

this makes the spoon toxic? or something?

[@GoldenSolutionPlating]

No

[@kiritbhatt1004]

Chemical ditel name plese

[@GoldenSolutionPlating]

hi what you mean

[@mmmk9995]

@@GoldenSolutionPlating what chemical used this

[@GoldenSolutionPlating]

Gold plating solution you can get all the equipment from my website www.goldensolution.co.uk Thanks

[@mmmk9995]

@@GoldenSolutionPlating romba nandri ayya

[@MagixScience]

You can't plate gold over nickel sulfate can you?

[@GoldenSolutionPlating]

you can gold plate on to Nickel yes

[@indian3055]

Can you give me a training?

[@GoldenSolutionPlating]

What are you looking to plate

[@indian3055]

Steel dinner plates and cutlery

[@GoldenSolutionPlating]

Ok where abouts are you

[@indian3055]

I’m from India

[@GoldenSolutionPlating]

@@indian3055 ok I’m in the uk 🇬🇧

[@ShawnaCostonPhD]

Major Metal Toxicity Folks. Major Sickness.

[@GoldenSolutionPlating]

no not at all

[@Freefallpilot65]

Your inhaling noises are too irritating to listen too. lol

[@GoldenSolutionPlating]

Freefallpilot65 I know