How To Grease the Wheel Bearings on A Can-Am Maverick X3

Рет қаралды 11,893

Жыл бұрын

Can-Am Maverick X3 Wheel Bearing Grease, How To, Can-Am, X3, Wheel Bearing, Grease, How To Grease Wheel Bearing On Your Can-Am X3, Maintenance, Bearings, Wheel, 2019, Grease, How To, SXS, UTV, Can-Am X3 Dude, Fun, How To,

Пікірлер: 24

@Jack-hj1vc 5 ай бұрын

thanks man. really helped.

@Can-AmX3Dude 5 ай бұрын

Thanks And I just hope it was good to get you to Subscribe it Free and that is the biggest thanks you could give me have a good one

@unitymixer Жыл бұрын

Freind, you need to breathe by your nose. You hand up in cardiac arrests 😮

@Can-AmX3Dude Жыл бұрын

Ya trucking 70 hours weekly and restaurants and smoking every day, I guess that’s were I will end up !

@domstarkey7279 11 ай бұрын

Your not alone brother

@Can-AmX3Dude 11 ай бұрын

@@domstarkey7279 ya had my wireless mic without the little wind reducing and it just amplified it like crazy 😛 won’t do that again! 😆

@joshfinn8601 Ай бұрын

I just did my on my defender hd10 and ordered the hub grease tool, unfortunately the x3 is the only one that the axle pases through the tool so i had too remove my hub to pull my spindle and drop my a arms what a pain in the ass.

@Can-AmX3Dude Ай бұрын

Ya must be, but thanks for the comment

@kevinkost7656 Жыл бұрын

Thanks for the video. Do you pull the axle from the front diff and grease the inside splines ? and how often ?

@Can-AmX3Dude Жыл бұрын

To be honest haven’t had the time to do the front yet just hope that they are not like the back ones, but will grease them as soon as got the time, and how often, I say once a year should be good if you put good water proof grease and after one year if you see that you don’t need more just leave it like that it’s not like anything can get in your rear end true the splines it just that the day you need to get and axle out you won’t need to buy a final gear and scrap your axle trying to get them out if you only do trail rides probably ones is good if you play in deep water every weekend check it more often hope this help Thanks for leaving a comment greatly appreciated have a good one !!

@judithpearson9845 Жыл бұрын

Where do you buy your grease

@Can-AmX3Dude Жыл бұрын

I get it at my can-Am dealer

@turq57nomad 8 ай бұрын

Any difference doing the rears?

@Can-AmX3Dude 8 ай бұрын

No about the same thing

@nicklanglois2971 2 ай бұрын

where is the game play

@Can-AmX3Dude 2 ай бұрын

PS5 ??? 😆

@KentuckyCanAm 3 ай бұрын

Over greasing bearings will destroy them quicker by building up heat and increasing friction. Bearings can’t roll when too much grease applied.

@Can-AmX3Dude 3 ай бұрын

That one is funny, because with all the extra added on we put on are X3 and bigger tires, I don’t think my wheels bearing won’t turn!

@KentuckyCanAm 3 ай бұрын

@@Can-AmX3Dude it’s your ride. I hope DIY people do a little research by reading others opinions.

@Can-AmX3Dude 3 ай бұрын

@@KentuckyCanAm have you ever packed a wheel bearing on a pickup truck or a trailer and I have and never had any problems by fully packing them cause that what we did at the dealership and heavy equipment and never had any problems in almost 30 years , but you can do anything I just know that I didn’t grease mine when I got my X3 and the rears had to be replaced in 6 months on stock tires and now the rears are on 3 1/2 years on 32 inches and no play !