How to hang drywall sheets

[@ericrodriguez5718]

- A drywall company will love this guy, he sure doesn’t waste pieces. - A finisher company will definitely hate him.

[@LeonsoGonzalez]

But extra typing work will cost more

[@Youtubersmiley]

​@@LeonsoGonzalezHating on people cost extra

[@allyn9789]

Mud guys will def wanna piece of this dude

[@diazelv]

​@@LeonsoGonzalez just type it all together

[@jacobcrock4515]

This dudes getting slapped if we gotta finish behind that. My boss ain't goin for that lol

[@Jutilaje]

Looks like a nightmare to tape. Lol

[@elvinmunoz5871]

😂😂😂😂👍

[@justinrathbun2864]

😳

[@juanit0tackit0tackito2]

the Kingdom of GOD is coming…“Silver is for the kettle, and gold for the furnace, but The LORD is the tester of hearts- Bible” your heart is like discovered silver, dirty and not pure, when silver is purified it is melted over and over, to the point that when it’s melted and glows red hot, it is pure enough to see your own reflection in the puddle, so also does the LORD purify your heart, till HE can see HIS own reflection in it, seek the LORD and be reborn, ask The LORD to renew and restore you, repent and be baptized for the forgiveness of sins, Jesus died so that our sins will be wiped away and so that we could be made new, if would be wise you would be wise for yourself, pick up your cross and deny your flesh and follow the path of GOD, for The Kingdom of GOD is at hand, in JESUS MIGHTY NAME Amen and Amen 🙏 o

[@KookelMcJiggs]

​@@juanit0tackit0tackito2 meh

[@neomacchio4692]

My thoughts exactly

[@jessp5966]

genius, now you won't have to bend over to patch. Saves your back. Real nice work

[@djblock215]

An amateur would agree but it eliminates the beveled edges of the drywall made for finishing flat

[@CameronHart-d2j]

This is not genius bro it's lazy but also makes more work for taping. It looks bad

[@wildbill1582]

All them seams are eye level thats horrible

[@alonsomunoz7584]

"Saves your back" said no one successful.

[@Imhim336.]

@@alonsomunoz7584where’s your work bro?

[@jamiemcgavran5405]

This guy either hates tapers or didnt have the extra $15 for 1 more sheet.

[@jeremiahjackson4031]

I thought the same😂

[@blackmasculine1]

Or, maybe just maybe he's not done yet. Just maybe though.

[@basdewildt7973]

He plasters it all himself too. He probably got 1 too litle sheet with him and thought that extra seem was less effort than going back and forth.

[@TrunxKraft3000]

Oh brother 😒 It’s not really a big deal, I’m sure it came out fine. Y’all just love poking at someone’s work from behind your phone. Bet money you don’t do everything by the book and if a camera was on you, the same type of people in these comments would be attacking your work too. Just stop it

[@redblankie1219]

​@@TrunxKraft3000 Learn to take some criticism.

[@freddielee7591]

gives a new meaning to "piece work"!

[@eagl3ye]

I’ve heard you should do the 1’ ripper at either the top or bottom to maximize your number of factory edges.

[@daveworzel]

Nice to see sound insulation has been put in.

[@JustinBenjaminOnline]

As an insurance adjuster, "I think I like when it rains" is an ironic song given how easily this stuff is wrecked if it gets saturated with moisture.

[@TeddyBear-ii4yc]

We were always told that the perimeter of every board should be fixed (nailed) so the horizontal joints here should have battens supporting the board edges. When the horizontal joints are supported by timber & fixed with fixings they won't crack if someone leans against the wall!

[@richardcravey4745]

He probably just used what he had left over instead of buying an extra sheet .. that’s very tappable … I’ve seen and done this when the client won’t buy more or is in a budget. At least he’s crossing a couple studs and bricking the pattern ..

[@davidsandvik7895]

It is way cheaper to buy another peice of board.....and make it tight and righ.,..... The labor to tape it cost way more then it cost to buy another sheet and hand right.......who knows what the finish is on the wall or if the wall gets something in front of it or what not

[@meandnature6452]

maybe people dont live 2 minutes from homedepot?@@davidsandvik7895

[@alexcarson9638]

@@davidsandvik7895no way really eh huh that’s crazy how much are they anyway for a sheet ? How much you get paid to hang it like I want to get into this but I’m only 150 pounds does that matter I can still lift these eh

[@number2son1980]

Serious question How was he able to balance that first piece so easily?

[@pierrelegenie2101]

Hoy voy a tapar un muro y estaba mirando vídeos sobre el que voy hacer pero ya con este forma no voy a tener problema 🙌🏽gracias líder

[@Cosmic_Soul]

Why didn’t you put the smaller pieces on top?

[@marcrodrod7776]

You wanna line up your factory edges and leave the cut side on the bottom or top of the wall. 👍

[@mexzytv3906]

Nice work.. ✌ this also my work Am good for the job..

[@nadiaconseillant8616]

The flat nails are used on the studs? 2.5 in nails?

[@johnbrown4949]

I like all the critique, the only correct way to hang is to cover the area, vertically or horizontal doesn’t matter. Your still going to have to cover the odd spacing and have the skill to smooth it out. If people think it’s hard to smooth out the extra space, don’t ever even attempt to skim coat an entire wall.

[@jrhackman7414]

Well, the edges are tapered for a reason

[@TinPerez-h9c]

One Question.. Why Not Just Put A Whole Piece Instead Of All Those Small Pieces..?

[@bigdanny9721]

No insulation?

[@halfcaf1105]

How not to hang drywall sheets*

[@dbongoloid9541]

Tf you mean? Don't have to bend over to tape/mud

[@halfcaf1105]

@@dbongoloid9541 dude please don't drywall anything if you think this is appropriate.

[@Showman88]

@@halfcaf1105what’s wrong with it

[@Showman88]

@@halfcaf1105just because he didn’t put one whole piece of dry wall and did it by smaller pieces?

[@mickonewell8628]

@@Showman88putting those in the middle might be easier on your back but you create a bigger problem for your self, now you will have a butt joint to hide when you could’ve just add drywall below coat it normal as a flat that you will never see but the butt joint going down the side of the wall like that you have to float it out a good amount to hide it creating a lot more work for your self more mud more sanding

[@CristianDelescu-v1o]

You don't tile with 2 rows, you only need one, and you don't need thermal insulation

[@Nooby69]

Someone please explain drywall to me how do yall survive anything more than a strong wind

[@EricHidalgo-j5w]

Wheres the 2"x4" backer nailer blocks in the middle section??

[@realwildones]

This dude is a BOSS with his finishing skills. Im sure he is doing it as a joke

[@swirledworld340]

Two walls done the same way?

[@JohnSmendrovac]

You don't do that on a public video

[@MrLouChris]

I don't understand why you didn't hang the vertically and then you wouldn't have to cut all them small squares but hey that's just how I would have done it!

[@KenKenTheZombie420]

It's because of the bevels. You want them to be parallel to the ground.

[@machinayrequiem8596]

​@@KenKenTheZombie420Ive hung a crap ton of sheet rock vertically and it always looks amazing Maybe it is because I know how to tape a bed really well, but its so much easier vertically.

[@Pseudify]

@@KenKenTheZombie420why?!

[@KenKenTheZombie420]

@@Pseudify that's what boss said

[@Pseudify]

@@KenKenTheZombie420 Sure, but if you can’t back up your comments with a reasoned argument, perhaps you shouldn’t post random comments that someone else may take for the gospel. The “boss” has been wrong on many occasions.

[@sal-x-king]

Nice mosaic work!

[@Youtdiai]

From someone who does drywall. Just do it vertically

[@shivablaster4825]

Horizontal is the way bro

[@shelynaemerald4676]

Dang! This guy is strong!!! I tried lifting a sheet that size at home depot and I could barely budge it 😂😂

[@drewnorth8985]

You were prolly lifing 2 sheets. They come in pairs from the store

[@shelynaemerald4676]

@@drewnorth8985 Ohh I didn't know that. I thought they seemed kinda thick?

[@vicentegonzalez5431]

No diffrence 2 Half Inch 8 footers are pretty damn lite​@@drewnorth8985

[@dakotarensberger]

Couldve ran 2 same sheets in the center but what do I know?

[@johnathanabrams8434]

How easy is that to uninstall. Very serious question

[@carl7445]

Why do we start from the top

[@moneyisgood2011]

U should of turn the board upside less joints but everyone has to start somewhere

[@sajhussain26]

Insulation?

[@HereIsWisdom1318]

Looks good.

[@marciaedwardscrown]

Plywood 3 by 2 in some spaces for radiator hinges.

[@WeirdLoner.]

Okay okay I like this! Very different from what I'm use to seeing. It's giving work smarter, not harder!❤

[@Thatguy-zf4dz]

How’s this smarter? Lmao bros doing multiple different cuts for something that needs 1, 2 max

[@Millenergized]

Using the scraps, cuts down on wasted material, I See 👀What Your Doing 💯

[@ThinkerTinker74]

Should've stood 10s?

[@Datanditto]

Why wouldnt you put the strip at the bottom so its not as noticeable?

[@Morris365]

Um naw I've hung a lot of drywall in my day and I've never put cut peices by factor edges drywall has a dip in ghe factory to factory so when you pill the peices together it makes a flat wall you never put factory to cut you can but you will see the high ridges when you paint it always start at the ceiling then go across use your last cut peice to start the bottom row so your not stacking seams at 8 foot or 12 foot but don't do it like this dude God bless you all much love

[@RickYelley]

Put all the pieces and put them right at eye level. Go vertical please!!

[@andrewcarr2431]

why not put the rip cut at the top or bottom and buy an extra sheet (

[@kikitopendejito1058]

Why waste more money?

[@chadleschasin2893]

To minimize the joints you stand longer sheets ….. your cost is in the taping …. I would have run you of my site ..seriously!

[@michaelcrossley4716]

good thing this wasn't your site.

[@raysepulveda7620]

Listen to the music, i think everyone here knows the right way. The pain in going out in the rain for drywall. Mans doing his job with scraps any old way with good results.

[@Loudvizuals]

​@@raysepulveda7620 felt that even finishing 😭 new construction. Is pretty bad to tho especially since the driveways haven't been poured so it lightweight floods, Muddy as ever, then the T pole and carrying your tools inside

[@meandnature6452]

grow up

[@julioportillo4763]

Use 54” drywall. Tape and bed guy will love you

[@garyg8036]

That drywall job has more screws than a female standing on a corner.

[@TaylorGroce-jd7wv]

seems pretty normal😭😭

[@brendanlewis5342]

didn't go from top to bottom 😮 instead he went top, bottom, middle and ended with gaps ruff.

[@RayTrophies]

Should have stood them up instead easier and would look better after finishing

[@homeroalonzo1278]

Leave the rip piece either up top or lower

[@bunphanny]

Great work May I tobe your friend ?

[@reassapalwan]

Name of this work ?

[@cristalgonzalez7004]

😂😂

[@rjritsema]

They make 54” drywall btw

[@eugeneivanov9627]

No isolation??🤔🤔

[@skindawg3615]

Stand boards up. Put rip at bottom behind skirt.

[@donguapo7862]

How to put a puzzle together

[@nicks39340]

Why?

[@ossieponcedeleon4304]

He is a handyman No a pro-hanger

[@victoriadewey6139]

no insulation??????

[@iron.man.drywall1910]

no, you don't want a 16' butt joint down the middle of the wall, you need 54" wide x 16' drywall.

[@ThatGuyFin]

Alot of people bitching about the joints and how much extra you have in labor. If you know how to tape that aint shit.. Just running the level 5 48" skinner over that that will will take care of it in 1 swipe...

[@stackmoneyyadigg3751]

Good work bro

[@angelomoreira135]

Super good 🎉

[@nathaniel7820]

Incorrect framing. Noggins are required to be placed between the studs.

[@Edenton123456]

Milwaukee and crocs… me too my man, me too!

[@DreamDesignsCanada]

We could leave the cut at the bottom why in the middle?? 💀

[@Djsencere]

He was doing good in the start then lost me in the middle wth I thought some ledge was gonna be built but nope just plopped it in

[@jona_le_mus]

Should've gone for that 12 footer

[@mccainproservices]

Too many seams right at eye level. I always hang all of it towards the bottom or all up high. Keep just one tight seam in the middle.

[@theaveragejoe838]

Why is he using so many strips

[@suron1311]

Cause hes too cheap to buy another board

[@Bryant801.]

Real question is why didn’t he just stand them up!

[@sgtsosa1]

@@Bryant801. horizontally gives more structural support, vertically depending how straight are the studs, you will notice a bow on the wall.

[@DanielMarquez-bs7mc]

No se si es el cliente o en instalador... pero aqui hay avaricia en su esplendor

[@kevinnesbitt4019]

Playing Tetris with drywall I see

[@Justmaddy5622]

Insulation what is that

[@abraham4039]

Insulation for the an indoor wall is wild

[@Justmaddy5622]

@@abraham4039 1954 built no codes .. more worried about the roof we need a repair urgently before next rain season 😂😂

[@groovyshoos5200]

If you play it in reverse badass hoody guy is stealing the wall sheets

[@Jakesteel83]

Should have bought wider sheets then no gap

[@twinpyramid5985]

Great job 👏🏾

[@ryanc2728]

Must have been running low on screws as well

[@Drywallfinishingtips]

Me gusta que dejen el corte enmedio porque es más fácil poner lodo ❤

[@KaleSchlegel]

Seen less joints at a marley concert

[@Transnacionalinc]

Strip in this case would have been better at top.

[@misterman3379]

You made lifting that 4x8 look way too easy

[@aslanmohammed9892]

Tu règles ton ossature par rapport à tes plaques, tu n'auras quasiment pas de chute. Ça m'a l'air d'une cloison de distribution alors où est l'isolation ?

[@israel984]

What about stand ups? Why use all those small pieces? Maybe you're the taper and your like. "Oh, I got this shit I could tape studs😂"

[@sekritskworl-sekrit_studios]

Where's the rest of the video? This is just a damn music video

[@DbiPro]

I thought you’re not supposed to do that because of the taping

[@sb19_]

The criticism on this post.. can tell no one has clicked on his profile to see the quality of his work😂

[@edbeltran2454]

Nice but a taper probably wont like that

[@chriscanelo]

And with the plastic crocs on

[@anonymousworldwide777]

Im all for making the most of your material. But damn, the finishers must hate you, lol

[@luisrivas6414]

How about 10' Long sheets...

[@martin34ist]

Must be 10 foot ceilings.🤔

[@jonathansaindon788]

Tapered edge to butt edge is a no no!

[@Pseudify]

It’s an easy fix. Just fill in the tapered edge with mud and treat it like a butt edge.

[@drmarsh4287]

Started so strong too. 😂 Just buy another sheet.

[@malcolmmurphy2924]

I would be so pissed taping that mess.

[@gemzgirl1973]

No, Willy! 😂

[@divineknowledge4607]

Sure, if you Lovey mudding and sanding 😂😂. Id laugh if i walk in on a employee doing that, then fire them or tell them to sober up.

[@ShawnMattice-s1b]

As a taper. That’s a nightmare

[@TeddyBear-ii4yc]

Why would you put the joints at eye-level? Other than ease of access, any cracks, shadows or defects from the taping are also at eye-level!

[@gregorybarr9727]

Looks like 9 foot have we never seen 54 inch board

[@Scottney]

Or, amd hear me out.... know your job and buy 4x10 sheetrock so you don't need to make all of these extra joints

[@frankparinco5395]

The seam Collector

[@YoungnX4]

-cool-

[@ewanmercieca2577]

Need adhesive

[@VictoriaAllred]

Please tell me there's a REASON those aren't vertical