How to Hardwire A Dash Cam in detail Suzuki Wagon R

[@yoppindia]

Thanks, It was really helpful

[@psycolana]

You're welcome!

[@saikatdebnath99]

Best video regarding wagon R fuse box and Fuse tap cable.....Thank you

[@psycolana]

your most welcome

[@prashantgupta3236]

Got the hints from this video and installed the dashcam myself. Thank you!

[@psycolana]

most welcome, feel free to share

[@pramodmutha9996]

@@psycolana where we got the fuse adopters ?

[@natt1948]

Excellent, very well explained in detail.

[@psycolana]

Glad you liked it, many thanks.

[@subithnair186]

Very good video. One question... After installing the adaptor into the slot inside fuse box how do you take out the cables through the fusebox cover?

[@lateoriadelvalor-trabajoes4072]

Hello Question: the space below in the fuse box. I didn't see in the video that you removed a fuse. That space for fuse, is it the one that appears in the fuse map of the user manual, as BLANK? If it gives a constant 12 volts that fuse hole, I can put a 10A red fuse on it? I have a suzuki celerio and iam trying to hardwire too. Im gonna use the rare frog light 10A to plug no constant voltage. Because the back up light its necesary on my country to pass the tecnical revision anualy. Please some advise to find 10A that i can use on the fuse map. I believe that the fuse case has not a lot of plugs for new accesories. Great video!

[@psycolana]

Hi, now it will depend on what you want to hardwire whether a dash cam, with parking or without parking or a gps unit. it dash cam is with parking function you will/might need a continuous power supply. On the wagon r fuse box i have removed the backup light fuse at 6:12 (you will not loose the functionality of the backup light)and have put a tap (which is basically a piggyback so u get an extra fuse) and for hardwiring i am using a 5A fuse

[@lateoriadelvalor-trabajoes4072]

@@psycolana Ty psyco, now I understand that the backup light will still work thanks. but I don't understand one thing. I want to install for parking mode, so I will put both cables plus the ground, for dash cam. It uses a 5a fuse to protect the dash cam, and the extender has a hole for the fuse to protect the car as well. In the case of discontinuous connection, the 10a fuse is placed on the side that protects the backup light and 5a to protect the camera as you explain it very well. But if I have a gap in the fuse box without use (without a fuse) and that gives continues current, and it gives me 12v, can I connect the cable for continues current there? If I put in that empty hole, that gives 12v continuous, the fuse extender, with the camera side protected with a 5a, what do I put on the protection side of the car if there was no fuse previously? Thanks!

[@psycolana]

@@lateoriadelvalor-trabajoes4072 if you have a blank (where u have no fuse) and u getting continuous power, you can connect the tap out there, and the otherside leave it empty

[@lateoriadelvalor-trabajoes4072]

@@psycolana Ok, thanks!

[@sadabaranidel5663]

bro why my ground in the hardwire kit is color red and for the fuse tap is red

[@prasitoli1282]

is that end dash cam footage from kerela 11:35

[@psycolana]

yes it is

[@pramodmutha9996]

Where we got the fuse adopters AliExpress will not delivered in india

[@psycolana]

yes got it from aliexpress and got them delivered to India

[@pramodmutha9996]

@@psycolana sir at present saturation, china company not any online order delivrt to india i also tri frm bangood

[@psycolana]

@@pramodmutha9996 or try the local market should be available

[@pramodmutha9996]

@@psycolana Thanks Br.🙏🏻

[@SumitDixit-zn1to]

My music system not working .Which fuse damge