How To - Hydro Mod The Oil-Filled Watches #1

  Рет қаралды 219,227

Darak Watches

Darak Watches

Күн бұрын

Пікірлер: 306
@papawoody9597
@papawoody9597 3 жыл бұрын
After watching this, I went to eBay and bought an MRW200H and Microlubrol. I don't even really care if there's any actual improvement to the watch that I'll ever use, it's just fun to tinker and learn new skills. Cheers mate, should be a hoot.
@cachorring
@cachorring 2 жыл бұрын
How was the watch now? :v
@mercster
@mercster Жыл бұрын
What skills did you learn?
@kyle_vr
@kyle_vr Жыл бұрын
kzbin.info/www/bejne/bKizgYiagbNpja8 - the MRW-200H, an Unexpected Favourite.
@valmonta3647
@valmonta3647 Жыл бұрын
Does the watch still works ?
@papawoody9597
@papawoody9597 Жыл бұрын
@@valmonta3647 Still ticking away.
@michaelkaliski7651
@michaelkaliski7651 Жыл бұрын
For those wondering why you might do this, the Hydraulic Press channel stuck an oil filled 200m rated watch in the test chamber and took it to the equivalent of 3,000m and it survived. Most 200m rated watches can go deeper out the box, but only to around 600m before the glass cracks or the case back collapses under the pressure. An oil filled watch with an electromechanical movement will suffer a severe reduction of battery life, so an all digital model or solar powered movement might be the best way to go. A solar digital watch would probably be the most suited for this type of modification. Lacking any bubbles inside the case, the watch will suffer severe internal pressure changes with heating and cooling. This may cause seals to fail prematurely as fluids are essentially incompressible and that excess pressure has to be relieved somehow. An interesting idea that can greatly increase the depth rating of a watch but probably not something that is suitable for an everyday beater.
@bradl2636
@bradl2636 Жыл бұрын
Nobody remotely thinking about diving to 3000m is thinking about buying this watch bro 😂
@saadmaanshahrier2
@saadmaanshahrier2 Жыл бұрын
That's not the point
@bradl2636
@bradl2636 Жыл бұрын
@@saadmaanshahrier2 Nobody diving to 200m is thinking about buying this watch either 🤣
@spavliskojr
@spavliskojr Жыл бұрын
And here we go..... Love the HPC!
@dermus7529
@dermus7529 Жыл бұрын
Why not put a little foam block somewhere inside who's only purpose is to get compressed/decompressed?
@cobaltace62
@cobaltace62 6 ай бұрын
I have done this on two watches. Once on a quartz Casio Marlin and once on a Casio G-Shock ani-dig watch. Only do this mod on a fully digital watch. Even the thinnest silicon oil will add resistance enough to drain the battery on an analog quartz watch. On both of mine, with new batteries, they died in 6 weeks. After a thorough cleaning and fresh batteries, they worked fine. A full LCD would be great.
@aprogress2374
@aprogress2374 9 күн бұрын
wow, just six weeks?
@rondj1965
@rondj1965 4 жыл бұрын
This is by far the best and most informative video for oil filled watch mod. Excellent job.
@darakwatches467
@darakwatches467 4 жыл бұрын
Hi Ronnie, thanks.
@notorcus
@notorcus Жыл бұрын
I know ill never do this to any of my watches but this was very informational and would be a great video for anyone actually wanting to do it.
@Pehr81
@Pehr81 Жыл бұрын
I’d use a deeper container so the dial and case back can be rotated to get rid of bubbles. That’s use more oil of course.
@user-dt9kp9cj3m
@user-dt9kp9cj3m 29 күн бұрын
submerge the opened watch in oil and put it in a vacuum chamber
@chrisc475
@chrisc475 4 жыл бұрын
Good timing, I've just bought an MRW-200H and want to give this a go. Thanks!
@romeowhiskeyjuliette8711
@romeowhiskeyjuliette8711 4 жыл бұрын
The MDV-106 doesn't "pop" because it's dial has very fine starburst etching that reflects light at all angles. It's really a cool watch for the price. Great job, bro. I'm confident to do my watches like that.
@busterscrugs
@busterscrugs Ай бұрын
Thinking about doing this with my Casio A700! Love the extra contrast and decreased reflections.
@taz1807
@taz1807 6 ай бұрын
some times i did this procedure, i prefer to have more oil and a bigger container, where you can just move the watch pieces inside the oil in some directions, to send the bubbles out of the watch easier. Anyway, very good video! Thanks!
@paulhopkins1905
@paulhopkins1905 2 жыл бұрын
Really cool, I have a vacuum pump and a small chamber. I'm going to try this with vacuum
@lorenzosilvestrini6096
@lorenzosilvestrini6096 3 жыл бұрын
ok, but what happen when you extract the crown for adjust the time? the oil escape?
@hexenhammer483
@hexenhammer483 Жыл бұрын
I was wondering this myself.
@dyslexicbien
@dyslexicbien Жыл бұрын
Think you should adjust the time before putting everything in
@daalvares
@daalvares Жыл бұрын
@@dyslexicbien so I think should be better a no-date watch ?
@mrmagoo.3678
@mrmagoo.3678 Жыл бұрын
with Mine?..I made a "Rolex Submariner" style watch into a Oil filled to test it, it has a rubber O-Ring on the Crown shaft though not just a metal on metal seal... it seems to hold everything back OK when I change the time/date, I could imagine some air working its way into the case eventually with multiple changes...but so far?..it's held up ok!.
@mrmagoo.3678
@mrmagoo.3678 Жыл бұрын
​@@daalvares if you angle the watch correctly when changing Date/Time (crown pointing UP/High) then You should be OK for a FEW changes, eventually though?.. air would work its way into the case with Multiple changes, but that's a quick painless fix.. 10 mins every 6 months?.. MAX!
@__9837
@__9837 26 күн бұрын
Great job! They both look great.
@josephdragan7734
@josephdragan7734 25 күн бұрын
I used my Food Saver vacuum device to remove bubbles from the oil bath. Worked well
@rafeadler1471
@rafeadler1471 4 жыл бұрын
Im glad you are back! You are one of the most unique channels on KZbin.
@darakwatches467
@darakwatches467 4 жыл бұрын
Hi Rafe, thanks, and welcome back.
@genexstyle
@genexstyle Жыл бұрын
If you add more oil to a container so you can assemble the whole thing fully submerged you can never get a bubble of air. The results where surprising on the first watch! Really cool, wonder how the durability is affected by this :)
@adamphelps2369
@adamphelps2369 Жыл бұрын
My thoughts too, that’s what I plan on doing
@michaluebi4038
@michaluebi4038 4 жыл бұрын
Super idea, i bought the SDW Hypertec Shark with oil filling.
@DePistolero
@DePistolero Жыл бұрын
Does the watch tick slower when oil inside? it seems as if the seconds hand is a bit more "lazy". Don't know whether this affects the timekeeping...
@boga92
@boga92 4 жыл бұрын
Thank you, Darak for this video. I think it's very helpful, and (as far as I know now), you do it quite properly. I already moded a Casio F-91 years ago, filling it with Olive Oil !. At the moment, still it's working quite fine. Visibility doesn't change as much as with analogics, but oil improves dramatically the submergibility of the watch. This just "water-resistant" Casio has gone diving with me down to 40 meters more than five times. And many more, a bit shallower. But now, I and a group of friends want to hydrolyze some analogic watches. First I decided to start with the MRW-200 that you fill here, because (as you say) the effect looks better than on the MDV-106. But after thinking about it, I'd rather prefer a watch like the Duro, with a screwed crown (even though a screwed-down case back is trickier to close than a case back with screws). I'm more confident about avoiding future oil leaks with a screed crown. Let's talk about the procedure. I like very much the box you used. I think it's the perfect size, and I hope to find something similar. I like also the way yo refill the leaking oil with the syringe. I guess that I will manage to close the screwed down back case properly (without leaving bubbles), and that I will set in position the crown, because I see that you close the case, before closing the crown. Is this to avoid excess pressure inside the watch, while you are closing the back, and let the oil leak through the crown's hole, in case of necessity? And finally, my biggest doubt: I don't see that you leave any bubble inside. The dial looks gorgeous in that way. But, aren't you afraid that with warmer temperatures, the oil expands inside the watch, and can cause problems (or leakings)?. In other oil modding I've seen that they leave bubbles (bigger or smaller), and (for instance) Sinn has patented a special piston for dealing with this issue. Tell me what you think about it. Maybe this oil doesn't expant¡d too much with the temperature changes. Finally, as I've seen in some other vídeos, I think that you are right with the density ot the oil. 50 cst seems t have the right amount. But I wonder why they don't use even less dense oils. If they keep the same conditions about conductivity, I don't see any problems to use them, and the hands would find less resistance in moving. Anyway, thank you for this vídeo, And I hope to read your answers.
@darakwatches467
@darakwatches467 4 жыл бұрын
Hi Boga92, thank you for your long and informative common, but you really should watch this video first, and we can discuss more, this is my follow-up video of the Hydro mod, kzbin.info/www/bejne/i6G8poCYl9xnmM0
@boga92
@boga92 4 жыл бұрын
@@darakwatches467 I already saw the other video. But I find impossible fitting the styrofoam balls in place while closing the case back. Do you think it's possible to fill the case with silicone oil through the crown hole? Anyway. I think you didn't leave any bubble inside these two watches. How are they behaving? Any leak?
@metallitech
@metallitech 3 жыл бұрын
For the thermal expansion, perhaps the o-rings of the buttons provide enough flexibility. Would be interesting to calculate the change in size of the oil.
@truenorthmuskoka9077
@truenorthmuskoka9077 8 ай бұрын
Ok looks great but how do you adjust the time
@felicianoabe
@felicianoabe Жыл бұрын
Very interesting, I would imagine doing so would make the watch more water proof in a way, right? Also won’t the oil cause friction and delay the whole watch by a bit over time? Also what happens when you change the battery? I’ll you need to have extra oil at hand to fill to avoid bubbles during battery changes, also would this work with a mechanical watch????
@chuffmeister1130
@chuffmeister1130 3 жыл бұрын
It might be the sun burst effect on the dial of that duro that makes it a little underwhelming, since it catches light differently under the different refractive index of the oil. Excellent video btw! Appreciate it
@TheFlyrodder68
@TheFlyrodder68 3 жыл бұрын
Can one do this to a solar-powered watch? I ask because I don't think I'd like to do a do-over every time I need to replace the battery. If not, I'd recommend replacing the battery with a new one before doing the mod to make it last longer before the next reapplication of oil. Nice video and thanks! Thumbs up!
@jiehan6232
@jiehan6232 2 ай бұрын
Same question bro
@adsagp
@adsagp 7 ай бұрын
Great video, thanks for showing us how you did it. Did you oil fill the digital watch too? If so, can you press the buttons when submerged under water? Does the light still work?
@tuber6382
@tuber6382 2 жыл бұрын
Does oil leak from the buttons or the crown when you pull it out to adjust the time?
@20cent
@20cent Жыл бұрын
That wouldn't be a very water resistant watch if that was the case..
@tuber6382
@tuber6382 Жыл бұрын
@@20cent so even when you pull out the crown the oil stays in the watch? Oh I'm surprised that's really cool.
@sjp3042
@sjp3042 8 ай бұрын
What happens when you loosen and pull out the crown to adjust the time. Does oil seep out?
@fishesfromtupperware
@fishesfromtupperware 2 жыл бұрын
Nice vid and it works great BUT it eats batteries. I've done a few of these and the battery has lasted as little as a year. I'm guessing because the motor is using a lot more torque.
@artempriadko6974
@artempriadko6974 Жыл бұрын
solar movement is the answer
@HJ-vs7lf
@HJ-vs7lf 4 ай бұрын
@@artempriadko6974 No, the oil stopt enough UV from getting to the dial, so it will not charge enough.
@jevs8188
@jevs8188 Жыл бұрын
I´m not an expert either, yet i think you need a convex lens in order to get the full effect like the watch on this video. Also, looking for viscosity and interaction with materials might be the kind of oil your looking for. Secondly, experimenting with the refraction index of the oil, in relationship with the kind and thickness of glass you´re using might create a more desirable outcome
@Substraal
@Substraal 4 ай бұрын
Can you do this also with solar watches?
@kagamioshiro7388
@kagamioshiro7388 4 жыл бұрын
Super injoy coz tomorrow i buying a casio duro ang i going like your doing hahahahha thanks,, now i know
@gregbarry5875
@gregbarry5875 3 жыл бұрын
That looks great!! Does it effect the battery life or accuracy ?
@murcielago1029
@murcielago1029 3 жыл бұрын
Battery life yes accuracy no is what I've heard
@greggreg2458
@greggreg2458 3 жыл бұрын
@@murcielago1029 Does it effect battery life even in a digital watch?
@murcielago1029
@murcielago1029 3 жыл бұрын
@@greggreg2458 yes… there arent batteries in mechanical watches lol
@MFRiley
@MFRiley 2 жыл бұрын
@@murcielago1029 quartz watches do exist.
@murcielago1029
@murcielago1029 2 жыл бұрын
@@MFRiley I suppose I mean "automatic", honestly I thought "automatic" and "mechanical" meant the same thing. My comment was meant to highlight that every digital watch has a battery. All digital watches (such as quartz) are going to have a battery and the battery life is affected by this technique. How fast it kills the battery, I'm not sure.
@chris_ackroyd
@chris_ackroyd 4 жыл бұрын
Glad to find you again - I’m still looking for a small bottle of Fluorinert 76 I think - but cheapest is about £50 for 500ml (way too much). As before, great vids BTW 👏👏👏👏👏
@reggiebusaing7535
@reggiebusaing7535 Жыл бұрын
due to oil viscosity, how accurate the time will be? Kindly validate plssss im guessing it will be delayed few minutes per day due to added resistance of the movement?
@joe19782005
@joe19782005 Жыл бұрын
Does it affect the accuracy of the watch??
@elvinventucillo4501
@elvinventucillo4501 4 жыл бұрын
So what happens now when you pull out the crown to adjust the time? Wouldn't the oil leak out? And you have to do this again when it is time to replace the battery?
@chief5145
@chief5145 4 жыл бұрын
sorry for late reply but i think some watches have some gaskets inside even if you unscrew the crown it is still water resistant
@br4713
@br4713 4 жыл бұрын
Really good question, because oil is uncompressible. If you pull or push any button it should leak
@ixD9
@ixD9 3 жыл бұрын
I imagine pulling the crown out would create negative pressure that would suck a little air bubble in past the O-rings, then pushing the crown back in would either compress that bubble or push oil out.
@paulfilliette9855
@paulfilliette9855 Жыл бұрын
it's waterproof even with the crownd pulled
@peyps2k
@peyps2k Жыл бұрын
Surely this affects time keeping? Might b low friction but it’s more friction than air?
@s0me3
@s0me3 9 ай бұрын
Since those watches are electronic, time keeping element doesn’t rely on moving parts and isn’t affected by friction. Oil friction affects only moving parts that show time. If they are capable of doing their move within 1 second intervals, it should work with no problem.
@MiguelBricaBrac
@MiguelBricaBrac Жыл бұрын
Don’t you need a high torque movement to compensate for the fluid density and avoid the gearing and step motor from wearing out prematurely? Also, when you adjust the time, does it leak?
@Francoisdumon458
@Francoisdumon458 3 ай бұрын
Would you still be able to operate the crown to set time and date on the mrw 200h, without oil leaking out
@felipebelluco7667
@felipebelluco7667 Жыл бұрын
Quick question: what if you have to change the date or hour? Does it become a mess?
@llongttower
@llongttower 11 ай бұрын
Does oil leak out if i am adjusting the time by pulling the crown out?
@Jedendwa0
@Jedendwa0 3 ай бұрын
Kamera pod spodem by ułatwiła robotę?
@Watchwist
@Watchwist 6 ай бұрын
will it not damage the mocement?
@FullTimePRO
@FullTimePRO 4 жыл бұрын
Watches look great man, I was reading that you can put the MRW200H dial/movement into the MDV106 body, maybe try that next so you get the look of the 200 in the Duro body, might be worth a video :D
@edbebop
@edbebop 2 жыл бұрын
For added points do this on a glass table so you can see underneath ;)
@markifi
@markifi 4 ай бұрын
is there an alternative oil that can be used? microlubrol or even fluorinert fc-40 is hella expensive to buy and also difficult to find
@butre.
@butre. 2 жыл бұрын
I'm curious to try pentane in a mechanical watch. it's still significantly more viscous than air, but only about 15 times more viscous rather than the 300 or so times the viscosity of the least viscous oils. it's also only about $35 for half a liter of the reagent grade stuff. I'm thinking it might be close enough that I can regulate it out and just live with not much power reserve. the only problem is I absolutely know it'll eat plastic parts and I'm not sure I'm willing to try it on anything that's got a metal movement holder.
@mehulraj9081
@mehulraj9081 6 ай бұрын
Which soap and material did you use to wash the excess oil
@amoledzeppelin
@amoledzeppelin Жыл бұрын
I wonder how the analogue models respond to the medium viscosity increase after oil filling. Do they become less accurate or does the battery life decrease after such a mod?
@S0NATA471
@S0NATA471 Жыл бұрын
I was wondering the same
@dogsnmotorcycles
@dogsnmotorcycles 2 жыл бұрын
So, a watch with a screw down crown doesn't leak oil when you un-screw it it?
@chandidas9858
@chandidas9858 Жыл бұрын
Replacing the battery will be messy
@malitiemmanuel1321
@malitiemmanuel1321 7 ай бұрын
This is great for Quartz, not Digital
@alanschiro9825
@alanschiro9825 Жыл бұрын
Will this work for automatic movements?
@batuhans.5120
@batuhans.5120 6 ай бұрын
no way
@xenon2Merchant
@xenon2Merchant Жыл бұрын
I wonder about power usage increase due to higher resistance of oil vs air ... and how you will change battery?
@zhuk_guitar
@zhuk_guitar Жыл бұрын
how does this watch continue to work? does the oil create resistance in mechanism?
@SwissplWatches
@SwissplWatches 2 жыл бұрын
How does this not mess up the dial printing and hands lume?
@Tootluminary
@Tootluminary 9 ай бұрын
I wonder how much the weight changes. Thank you for the informative video.
@fajaralfian1684
@fajaralfian1684 2 жыл бұрын
I have a Casio MRW 200H watch, exactly the same as the one in this review. the watch is very powerful
@ASMROW
@ASMROW 6 ай бұрын
Noway. Exactly the same? So you are saying you have a copy of a global mass produced watch? Unbelievable.
@wallaguest1
@wallaguest1 2 ай бұрын
in mechanic watches, does accuracy change with oil?
@LajosKormos.
@LajosKormos. Жыл бұрын
just wondering if this mod would improve legibility of a white dial/golden hands combo? thank you
@tissapathiratna7761
@tissapathiratna7761 8 ай бұрын
Will oil create a drag on gear train.? & Stepper motor !
@jo-wq7jy
@jo-wq7jy 3 жыл бұрын
It is make battery drain faster ?
@jpalacios117
@jpalacios117 3 жыл бұрын
You could close that container and turn it sideways so that the air can go out through the crown. Maybe it would take a couple minutes though
@xSO20
@xSO20 Жыл бұрын
Hello Darak, I was wondering can I use this silicone oil as a refill for my lubricating foam for watches? the ones inside the foam were liquid clear type silicone not the typical white ones.
@IzulHamidjaja
@IzulHamidjaja 8 ай бұрын
I got question. If you hydromod a date watch, would it mess up the liquid if I were to adjust the date?
@dbons_np
@dbons_np 2 жыл бұрын
I wonder if it work well in my Bulova curv. I’ve been thinking about doing it as I think it would really make it pop.
@jlg395
@jlg395 Жыл бұрын
Really interesting stuff.
@KaliLinuxIn
@KaliLinuxIn 2 ай бұрын
Just did it to my F91W a hour ago ... There is some minus point of it. The light was low on F91W. Now its more weaker barely shows the minutes. And the beep sound become very low.
@stevesibaja3123
@stevesibaja3123 2 жыл бұрын
Can a Hydro Mod work on a Casio DBC 150 and DBX 112 for Water Resistant
@rainnelmaclang4803
@rainnelmaclang4803 8 ай бұрын
I wonder if the movement of the Seconds Hand and the mechanical gears, while they move through the oil, would create enough drag to make it use up more battery power, and shorten the battery life?
@rainnelmaclang4803
@rainnelmaclang4803 8 ай бұрын
I learned from other videos that the electric current draw of oil-filled mod is 3-4 times more than the original non-filled watch. This is due to the drag that the oil makes on the rotating parts, demanding more power from the quartz drive. So expect your batteries to run down faster, meaning, if the original watch will run for three years before it needs battery change, the oil-filled one will last only one year or less.
@hendralincoln2225
@hendralincoln2225 4 жыл бұрын
can it cause leaks in the watch in the long run?
@tiov3001
@tiov3001 8 ай бұрын
Have you tested this on a timegrapher?
@jamarmeadows
@jamarmeadows Жыл бұрын
What about changing the battery? That seems like that would be a problem.
@BrockLeyland
@BrockLeyland 2 ай бұрын
What about battery life, since the friction/resistance would be greater than air
@Night-Shade-NL
@Night-Shade-NL Жыл бұрын
how would you set the watch thou. wouldnt the oil flow out if you hold it wrong?
@semper5recon
@semper5recon Жыл бұрын
I have a Question, dose the oil escape when resetting the Time ???😊
@lukishere
@lukishere 10 ай бұрын
Can the same technique be used for a rangeman 9400?
@Brokmod
@Brokmod 4 жыл бұрын
You should also install a domed crystal for the full effect. What happens if you pull the crown? Will it leuk? Thanx for this vid!
@mikerotch6068
@mikerotch6068 4 жыл бұрын
It definitely will.
@ro63rto
@ro63rto 3 жыл бұрын
What happens every time the clocks go backwards or forwards? Or even date detting. The crown coming out will introduce air won't it?
@lookaaaa
@lookaaaa Жыл бұрын
And what happen if you open a bottle keeping it horizontal, the cap will introduce air won’t it? ;)
@VladimirLadev
@VladimirLadev Жыл бұрын
Will the oil run out if you try to set the time?
@xZeroOffical
@xZeroOffical 9 ай бұрын
How do you reverse this in case that it does not work out well? I guess a lot of rubbing alcohol and work?
@kewintaylor7056
@kewintaylor7056 3 жыл бұрын
Can we do the automatic watch like this, I wonder if its effect the tourbillion and make accuracy change?
@Digta
@Digta 2 жыл бұрын
Would this be suitable for a Marathon GPQ?
@lazydude699
@lazydude699 Жыл бұрын
Wouldn't the viscosity of the oil affect the accuracy of the watch?
@Genecaster
@Genecaster Жыл бұрын
Mechanical I would absolutely think so, quartz, I don't think so as it's entirely electrical.
@lazydude699
@lazydude699 Жыл бұрын
@@Genecaster wouldn't the hands of the watch find it harder to move? Real world testing have to be done to make any claims tho
@larsschmidt7249
@larsschmidt7249 4 жыл бұрын
would the oil slow down the movement ?
@fredfour0
@fredfour0 3 жыл бұрын
Only this the viscosity is high.
@swarovski333
@swarovski333 9 ай бұрын
How much does battery life decrease after this process?
@HandelOp6No5
@HandelOp6No5 2 жыл бұрын
Interesting. Looks great.
@johnniewalker6865
@johnniewalker6865 10 ай бұрын
Doesnt the oil short circuit or ruin the electronics inside the watch
@brokestudent8548
@brokestudent8548 9 ай бұрын
No, oil is an isolator and non-conductive.
@mirceagavan7046
@mirceagavan7046 4 ай бұрын
If you have to reset the time or date will the oil flow out?
@TheDonCucaracho
@TheDonCucaracho 2 жыл бұрын
Hey mate Any updates on the watches? Did they leak?
@RyugaChan
@RyugaChan 3 жыл бұрын
How does the viscosity of the oil affect the drag on the hands of the watch? I'm guessing that for digital you don't care but for analog watches there are moving parts, hence, there's resistance. So have you tested for +/- seconds per day?
@murcielago1029
@murcielago1029 3 жыл бұрын
I haven't tried it but I've heard in quartz watches like this one the accuracy is unaffected but it zaps battery life. Probably wouldn't want to do this on a mechanical.
@tcwhite0104
@tcwhite0104 Жыл бұрын
Awesome but how does this NOT leak out of the crown.
@wallytangofoxtrot4721
@wallytangofoxtrot4721 Жыл бұрын
They are water resistant watches. Seals at the crown. No water in. Similarly, no oil out.
@tcwhite0104
@tcwhite0104 Жыл бұрын
@@wallytangofoxtrot4721 awesome
@rchard6345
@rchard6345 3 жыл бұрын
really cool 👍 ..well done !
@Siberius89
@Siberius89 9 ай бұрын
why dosent affect to the mechanisim?
@johnnie5442
@johnnie5442 Жыл бұрын
This can't be done on mechanical watches, can it? Also, I guess, changing the battery becomes more involved.
@JavierCasanovaMorrison
@JavierCasanovaMorrison 9 ай бұрын
Newbie here asking a question, will the watch still keep time correctly due to the increased resistance of the oil against the seconds hand?
@joliverlie151
@joliverlie151 2 жыл бұрын
Can u show us to test the lume ?
@brandonbowman6828
@brandonbowman6828 4 жыл бұрын
Found YA! Nice recovery bro
@darakwatches467
@darakwatches467 4 жыл бұрын
Hi Brandon, thanks.
@AudioPhun
@AudioPhun Жыл бұрын
I sell silicone fluids and might try this with something with a lower viscosity. I’ve got 0.65, 1.5, 5 that might work better
@ReparadorAficionado
@ReparadorAficionado Жыл бұрын
In theory, if you remove the seconds hand, the battery life would improve.
@epluribusunum6622
@epluribusunum6622 9 ай бұрын
What?
@sorcer888
@sorcer888 9 ай бұрын
great stuff but changing battery will be a pain, at least it is not going to be that often
@sweetalert480
@sweetalert480 3 жыл бұрын
how about baby oil ?
How To - Hydro Mod The Oil-Filled Watches #2
12:06
Darak Watches
Рет қаралды 46 М.
ЗАЛИВАЕМ МАСЛО В ЧАСЫ CASIO - HYDRO MOD OIL
12:07
Margul Gear
Рет қаралды 162 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
The Issue Casio REFUSES TO FIX! 👀 F-94W Mods 💡
19:09
GOAT Reviews
Рет қаралды 21 М.
Are AliExpress Watchmaking Tools Any Good??
46:30
My Retro Watches
Рет қаралды 34 М.
I Spent $7,000 On a Broken Version of My Dream Watch
1:06:09
Wristwatch Revival
Рет қаралды 748 М.
Do Oil-Filled (Hydro Mod) Watches Actually Dive Deeper?
10:28
The Dropzone Channel
Рет қаралды 255 М.
Budget Casio Duro Mods! Sapphire, Bracelet etc for $40!
10:19
Just One More Watch
Рет қаралды 441 М.
Oil Filling My Vaer Diver!
15:39
All Things Random
Рет қаралды 9 М.
$40,000 Luxury Watch Needs OIL CHANGES?!
30:26
ProducerMichael
Рет қаралды 350 М.
Casio MDV-106G Hydro Mod-How to video
9:31
OFD Watch Reviews
Рет қаралды 53 М.