Thanks for the really useful video and I've just subscribed to your channel :) I have similar issue with my mixer but thinking of replacing it with a spare mixer (same model) instead. Question is the spare mixer is kept in my store room for 7-8 years and I'm not sure if I can still use it, the internal seems not rusted, a little bit of water inside and sort of metal peeling on the outside. Any advice? Other reasons to replace with spare mixer, is the current one has other issues like the internal has dirt/rust/limescale build up
@supermaniac5 Жыл бұрын
Thanks for the video. Gonna give it a go with the cartridge out to clear the lines 👍
@ThePunggolHandyMan Жыл бұрын
Give it a go! You can do it
@fahmi95 ай бұрын
I followed your steps but at 2:31, my mixer head (?) doesn't come off at all unlike yours. not even loose. worse of all, the little Allen screw that was holding everything together got stuck in the tiny hole and I was left with a worse situation than I had started. this is the problem with DIY and what generally puts me off 😞 I managed to pry the screw out with much difficulty, only for it to fall back into the hole while I was trying to screw it back in. luckily I managed to do it a second time round and fixed it again. my water pressure issue wasn't solved but at least it is still working now.
@MathewTip2 жыл бұрын
Thanks for this video 👍🏻😄
@ACAB10011 ай бұрын
Hi, I need to cut main water of at home ,before I strat unscrew everything?
@ThePunggolHandyMan11 ай бұрын
Yes please do!
@debbiewhoelse Жыл бұрын
I wish I watched this video before trying to adjust my thermostatic mixer valve. 😂 I stupidly unscrewed the handle and water was gushing out and soaking me from head to toe. I was lucky that there was no hot water in my storage heater. Because I had zero idea how to turn off the main water supply, I had to use a lot of strength to push the valve back in against the water pressure and screw it back. 😅 Btw, do you know if thermostatic shower valves are easily replaceable? Are they somewhat like “standard” size?
@ThePunggolHandyMan Жыл бұрын
😆 thats a funny story! I'm glad you're not hurt! I'm not sure about thermostatic valves, however, as with all valves, I do suggest you bring the old one to the shop to get an exact match!
@kevinlauchinjoo29382 жыл бұрын
Hi sir, thank you for sharing this video regarding this cartridge. May I know how to check what is the size of the cartridge or how to measure it in order to get replacement. Thank you.
@ThePunggolHandyMan2 жыл бұрын
My suggestion is to take the cartridge out and bring it to the store
@kevinlauchinjoo29382 жыл бұрын
@@ThePunggolHandyMan thank you sir
@insanezaneza10 ай бұрын
Question, say now you've already checked the mixer an all is good, but your hot water on just the tub is still low, no other hot water taps are low, just the tub bearing in mind its a mixer, what then?
@derrickheng92562 жыл бұрын
Thanks for this! My common toilet bidet spray has good pressure. But my master toilet bidet spray is abit weak. I have turn up the inlet knob to the max already but still week. What could be the issue? Thank you!
@ThePunggolHandyMan2 жыл бұрын
Same thing! Might be clogged
@derrickheng92562 жыл бұрын
@@ThePunggolHandyMan thanks for the reply! And where do I find the cartridge for bidet?
@Gadget4us9 ай бұрын
Can you show how to increase water supply in piano thermostatic wall mixer. Inlet pipe has pretty good water pressure but flow from the mixer is very low. Head shower hardly working.
@ThePunggolHandyMan9 ай бұрын
Wow I haven't had the opportunity to take one apart and they're pretty hard to come by
@tanchoonheong Жыл бұрын
wa, how come water pipe will have stone sia.
@ThePunggolHandyMan Жыл бұрын
Actually if there are works further up the pipe line, it may be contaminated by some small stones and it will make its way into water outlets. Unfortunately in this case it is the shower mixer.
@alvin194810 ай бұрын
From the day i got my installed lf shower mixerthe pressure very low. Is it becauseof the WEL rating? If yes, is there a way to remove any restrictor? Or i need change mixer? Thanks.
@ThePunggolHandyMan10 ай бұрын
Of course save water means less pressure! Can't have it both ways
@hueylanchu18782 жыл бұрын
My mixer has a loud bang when turn off
@hueylanchu18782 жыл бұрын
How can I forward you a video to show
@limhuili75012 жыл бұрын
Can you show a video for bathroom tap?
@ThePunggolHandyMan2 жыл бұрын
kzbin.info/www/bejne/fmHUd3SDrp6AbZI Can try this!
@smhong7462 жыл бұрын
The set screw of my tap is very tight, it doesn't move at all. I am afraid that i will break it if i put too much force on it. How arh?
@ThePunggolHandyMan2 жыл бұрын
Squirt a bit of WD40 on it and wait awhile.. should come off
@qwe74102 жыл бұрын
What are the better brands for taps
@ThePunggolHandyMan2 жыл бұрын
Hi! I'm not sponsored by any company so I'm not at liberty to recommend! But I'm sure the quality and price are related!
@jeanchen91352 жыл бұрын
Hi, what’s ur contact?
@ThePunggolHandyMan2 жыл бұрын
Hi! You can go to the Punggol Handyman FB and contact me there!