How to Install 2015-2017 Subaru WRX/STi C-Light LED Halos

[@lecombattantbr]

Here at 10:30 you don't show how you leave the plug for the oem c-light bulb. You simply leave the adapter out ? Wouldn't that open the opportunity for condensation?

[@christianprattx]

Doing this set up right now actually, and yes it will. Pretty disappointing that they didn't give at least a little grommet to feed that wire through but oh well I guess

[@theearcollector7109]

@@christianprattx i seal with silicone

[@brandonharlow7067]

Paul, thanks for the helpful video. I wouldn't have had the courage to open the headlights on a brand new car if you didn't make it look so easy. Completed the job this past weekend and although it is time consuming, it isn't hard at all. With the chrome painted black and your c-light, it is looking how it should have came from Subaru in the first place. My only gripe is that the yellow wire in the pigtail is not long enough to reach down to tap into the turn signal in the lower bumper. I had to cut that mesh sleeve off of the pigtail harness to have a long enough wire. But then the other three wires are too long which isn't a big deal, just zip-tied them. For true plug and play though, that pigtail harness with the male connectors should have the yellow wire like 2 ft longer than the white, black and red. Awesome product though. Can't beat it for the price and I think looks better than Subispeeds new aftermarket complete headlight which costs over $1,000

[@genehoffman1644]

totally agree with you regarding the yellow wire... wish the yellow wire was longer than the rest.

[@jpd3070]

I like the video, though I wish there was one for the limited headlights as there are some significant differences. also some mounting tips / suggestions for the drivers would've been nice as well.

[@nerozyz]

I just wanna the LEDs as a DRL, but not those amber turning light, is it possible ?

[@xil3ntkha0s]

If you plug in the optional DRL harness into the factory headlamp connector where he's pointing at around 9:10, where do you plug the connector from the main harness (the gray one) that was initially connected to the headlights?

[@diodedynamics]

This is the old process. We have since come out with a newer DRL harness. With this new process, the factory headlight harness will plug back in like normal, and the new DRL harness will plug into the factory DRL resistor box. There are two wire leads coming off of the DRL harness that will run to the red wire on the wire pigtail on either headlight.

[@OneProN00B]

Amy chance for a plug and play harness so I don't have to use t taps?

[@Tundra0128]

I wanna get these but i need to change my actually low beam high beams to led first. Cant have those be halogen while the c light is led

[@707lonewolf]

Nice I cant wait to retrofit these for my customers

[@jonizzzle]

Any chance on releasing a video for the WRX limited / STI? I know there are other videos on KZbin but I'm interested how we're "supposed" to install them directly from Diode Dynamics.

[@diodedynamics]

+jonizzzle Next time we have one into our garage we will be sure to shoot more videos!

[@Williams1505]

When you connect the turn signal can you eliminate the bottom turn signal if I want just the c-light as a turn signal. How would I do that?

[@diodedynamics]

Hmm, I'm not sure about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@godsplannn]

I’ve just got the 21’ yesterday with 90 miles as of now, will these void the warranty? I’m also trying to install halos

[@diapermaverick6287]

you mention you can double the light output of the white during the day. would we just attach the red wire to a positive trigger? thanks.

[@diodedynamics]

+Diaper Maverick To run these C-Lights as a DRL, you will need to install our DRL Harness as well. Check out the harness and our installation video at the links below! DRL Harness: kzbin.info/www/bejne/Y6SnY3dojNWtZ9k Installation video: kzbin.info/www/bejne/Y6SnY3dojNWtZ9k

[@ClarkTaylorM]

Is there any chance you guys could make a tutorial video like this for the 13-17 XV Crosstrek Switchback C-Lights that you guys sell? You have a showcase video but no tutorial (unless I just haven't found it yet) I really want these lights but I'm not sure I could do it using only the various WRX tutorials that are all over KZbin. Theres videos for the LED bulb replacement on the Crosstrek but not the full LED Switchback C-Light strip upgrade.

[@diodedynamics]

+Taylor Clark Next time we have a Crosstrek into our garage, we will be sure to shoot more videos! In the meantime, please don't hesitate to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or email us at [e-mail], and we can walk you through any installation questions!

[@7381366]

Can you make a video showing how to install the drl harness ? I’m quiet confused one end of the is a stock connector and the other two wires go where ?

[@diodedynamics]

We've got you covered! kzbin.info/www/bejne/Y6SnY3dojNWtZ9k&feature=emb_title

[@the73inchdic3]

What does the red wire coming off the pigtail connect to?

[@diodedynamics]

Hi there! The red wire connects your parking and daytime running lights.

[@diapermaverick6287]

it seems that nothing is really holding the c-light down. doesn't it flop all over the place and rattle?

[@diodedynamics]

+Diaper Maverick Hi there! These boards are a direct replacement for the factory boards and fit right underneath the factory reflector lens. Once the lens is put back in place and the clips are snapped into their original position, it holds the boards in place. If you have any further questions, please don't hesitate to contact us!

[@hellboy2pt0]

You sent me the newer replacement DRL Harness to me. I installed it and removed your original DRL harness. The flickering issue seems to be gone. With the new harness do you need to still use the white pigtail wire and tap into the parking light. With out taping the parking light I'm not getting power to the C-Lights when the headlights are on.

[@diodedynamics]

+hellboy2pt0 Yes, that is correct. We recommend tapping the white wire from the C-Light pigtail to the red wire coming out of the OEM C-Light or Sidemarker. If you have any other questions, don't hesitate to contact us!

[@enj5932]

when you connected the white and ground, I saw there was a red wire still free besides the Amber. what is the red wire for?

[@diodedynamics]

+BellaWrx _NJ Please give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and we can help you out with any wiring questions!

[@iBenRollen]

Great response Diode Dynamics... I have the same question. Why not just answer publicly

[@general111ful]

What about the now unsealed hole where the factory bulb was? Those headlights are going to build up humidity..

[@alexisb5993]

I'm wondering the same...

[@marcosmarquez2926]

My turn signals still work but my c light don’t any idea why?

[@diodedynamics]

Oh no! Sorry to hear about that! Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our in-house US service team would be happy to help you with that.

[@jimmystanton1126]

what do you mean by inside the bulb for limited model

[@smotonaga]

I know you already have a video for the BRZ headlight, but the oven is required for those headlights?

[@diodedynamics]

+smotonaga (VersuS HD) That is a great question! The glue on the STi headlamp and the glue used on the BRZ are two different glues. For the BRZ, we would recommend heating the headlamp in the oven, for easy glue removal. If you are still having issues, give us a call at 314-205-3033, Monday-Friday 9 am-5 pm CST, and our sales representatives can help you!

[@GR8GUY54]

Yet another great video and easy to follow instructions. Installed the TaT kit as well and love them a year later! In this video it starts when the light is already removed from the vehicle...for someone whom has not removed these from the car before, do the written instruction cover this step? I was going to order today and wanted to have my DRL configured as well. thoughts on what I should do if I want to run this setup with the DRL configured as well but never removed the lights from the vehicle?

[@diodedynamics]

+GR8GUY54 Thanks for your support! The installation guide that comes with this product provides instructions for after the headlights have been removed from the vehicle. Removing the headlights does require taking the bumper and radiator shroud off the vehicle. If you is uncomfortable doing this yourself, we have a great network of Authorized Dealers/Installers who may be able to help you out! Check out the link below to find one near you. www.diodedynamics.com/store/index.php/find-dealers/

[@gogodori]

Is it common for the switch back to not light up or the c light itself to not come on at times? I’ve changed the tap connection to a stronger one and that last a day until it rained the next day

[@diodedynamics]

Hi Edgar! That should not be happening, we're so sorry you're experiencing an issue. Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be more than happy to troubleshoot that!

[@silicum8333]

I hardly doubt it, however, is it possible to hook up a rgb controller to this c leds?

[@diodedynamics]

Hey there! Our Multicolor controllers will not be compatible with any of our Switchback products. If you have any other questions, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail]!

[@DanGoodShotHD]

It would've been nice to get more close-ups while he was doing more detailed work, like removing the clips.

[@diodedynamics]

Thank you for the feedback! This helps us improve in the future.

[@jrmz]

Where can I buy the DRL Harness? I don't see it on your website.

[@diodedynamics]

+tremonti The DRL Harness is being released in the coming weeks! Keep checking our website for updated information.

[@jrmz]

Diode Dynamics Any news on the release date for this?

[@diodedynamics]

+tremonti, our plug-and-play harness should be released in the next couple of weeks. Thanks for your patience!

[@anthonytopalian4586]

With the wire coming out for the c light, is the inside of the headlight completely sealed?

[@diodedynamics]

+anthony topalian Thanks for reaching out! The wires should be run through an existing factory hole or grommet in the headlight. The headlight would still need to be completely sealed to prevent any moisture or condensation. If you have any further questions, please don't hesitate to contact us!

[@FsMegaMan]

Opening them isn't as easy as everyone says it is honestly

[@morefun790]

I received my c light today, I have one question, the limited c light hole is to small to fit your connector, could you tell me how to unplug the connector(have some tip ?) so I can take to wire through this hole first and then plug the connector back

[@diodedynamics]

+Jackson Wang Thanks for reaching out! Please email us at [e-mail], and we can help you out!

[@morefun790]

I have sent a e-mail, waiting for the response...

[@diodedynamics]

+Jackson Wang We look forward to assisting you! We do our best to reply to all messages within one business day. If you have not received a reply from us by the end of the day Monday, let us know!

[@morefun790]

thanks for your reply, I have received the mail, thanks a lot

[@diegooso1470]

When you buy this from the website is it 140$ for one or for the pair ??

[@diodedynamics]

The price on the website will be for a pair. When ordering, you will only need a quantity of one - thanks!

[@tonyluu3173]

for some odd reason my cables seem to be loose because c light would sometimes be off and when i tap the plastic undercoverthe where cabels are it would turn on again.

[@diodedynamics]

Feel free to shoot us an email at [e-mail] and we can help troubleshoot for you!

[@OiDavoMate]

your drl harness says it will disable factory drls, if i've got my fog lights as drls they won't work as drls in combination with the c light?

[@diodedynamics]

+OiDavoMate It would depend on how the fogs were wired to function as the DRL. Go ahead and send us an email at [e-mail] and our sales representatives can help you out!

[@ashtynn5599]

Would they fit the gc8 heads (I’m trying to make a kaizen style headlight)

[@diodedynamics]

We've seen these retrofitted into GC8 headlights before, but these are only drop in for the 15+ WRX.

[@felixsandrino3380]

I just installed these not to about 2 weeks ago and one of the sides just gave out. The swtichback amber color still works when i use it. Any thoughts Diode Dynamics??

[@diodedynamics]

We'd recommend checking the connection for the white input; it's probably just loose. Thanks!

[@felixsandrino3380]

+Diode Dynamics cool ill check it out over the weekend. Hopefully its just a loose connection.

[@felixsandrino3380]

+Diode Dynamics so i just checked all the wiring in my car. Everything seems to be wired up correctly. White to red for parking lights, black to black for ground and amber to blue for the turn signals. The white parking lights are still is not working for one side. I put the stock c light bulb back in and its lights up so i know it cant be the factory wirings. The only thing i can think of is theres something wrong with the wiring itself or the bulbs are shot. But the amber turn signals still work tho. Whats your recommendation?

[@diodedynamics]

+Felix Sandrino Go ahead a give us a call at 314-205-3033 Monday-Friday 9 a.m.-5 p.m. CST, or shoot us an email at [e-mail], and our sales representatives can help troubleshoot these issues. If you have any other questions, please feel free to contact us!

[@charlielapp2427]

Does anyone know if you can cut the pre existing drl bulb and housing out of the circuit? I tried calling Diode Dynamics and they didn’t have an answer. Thanks.

[@charlielapp2427]

Update - you can cut the pre existing DRL bulb and socket out of the circuit and solder the new LED wires directly instead of using the provided snap on connectors. Just finished doing this and can confirm it works.

[@xil3ntkha0s]

@@charlielapp2427 so you cut out the bulb on the headlight that was originally used in the C-light and soldered the pigtails to the headlight wiring? I'm a little confused @ 9:07 where he says if you have their DRL harness you plug it into the factory connector; where would the actual factory wiring connect to then?

[@charlielapp2427]

@@xil3ntkha0s I'm not sure what he is talking about there. The DRL harness they sell plugs into the pigtail connectors coming off the driver for the LED light. They have another video that shows an install for the DRL harness I would watch that for better clarity. Also, look up other videos of the install... you kinda have to watch a bunch and piece it together since their instructions aren't the best.

[@jasonpoultry0]

Drl harness eta? Holding off on buying this kit for that sole reason :/

[@diodedynamics]

+jasonpoultry0 The DRL Harness is available now! Check out the link below for more information. www.diodedynamics.com/store/catalog/product/view/id/23059/s/2015-2016-subaru-wrx-sti-c-light-switchback-led-boards/category/634/?

[@bmanual]

for some reason, after the install, the passenger side goes dim when the car is running. when off they work fine.

[@diodedynamics]

+Brian M Mireles We're sorry to hear about the issues with your C-Lights. Please give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and we can help you troubleshoot and get a replacement sent your way if necessary!

[@bmanual]

Diode Dynamics thx. spoke with Alex and his advice was to switch the drivers and sure enough the problem followed the driver. will call back tomorrow to see what next steps are.

[@D1G1TALD3ATH]

are we getting any closer on the harness?

[@diodedynamics]

+D1G1TALD3ATH, our plug-and-play harnesses should be shipping out by the end of the week! Thanks for your patience!

[@Coffff]

+Diode Dynamics Will the drl harness be a separate item on your shop, included with the c-light, or an add-on?

[@diodedynamics]

+Goldx, the DRL harness will be included with the C-Light order!

[@billy99100]

Great video bro... But I could never do this without breaking something..

[@diodedynamics]

We have a great network of Authorized Dealers/Installers who can help you out if you aren't familiar with opening headlights! Check out the link below to find an installer near you! www.diodedynamics.com/find-a-dealer

[@briansoares478]

Hey... I have a 2017 STI and I cant find the 6th screw in the middle... Any help?

[@diodedynamics]

+Brian Soares Shoot us an email at [e-mail], and we can help you out!

[@oloutback92]

How would I wire these if I wanted the amber as my DRLs ?

[@diodedynamics]

The C-Light is intended to only turn amber when the turn signal is activated, and white for parking lights/DRLs.

[@YounggCEO]

Just swap the wiring. I got mine done today and I'm running amber as DRL.

[@my73737373]

Will this also work on a top of the line 2016 outback as well?

[@diodedynamics]

+Will Gottwald Go ahead and shoot us an email at [e-mail], and our sales representatives can help you find what you need for your Outback!

[@cesardiaz2798]

Does this require a flasher module ? Will this go best with 5000k or 6000k hid kit

[@Kuth70]

+Czaa Diaz If you mean do you have to use the turn signal option in the c-light, no you don't. If you mean do you have to use a different turn signal module under the dash because of the hyper blink, no you don't, unless your turn signals in the bumper are also LED. I have the OEM turn signal bulbs plus the DD -c-light and it works fine.

[@diodedynamics]

+Czaa Diaz, Our C-Light will go best with a 6000K HID kit. A flasher module isn't needed! If you have any other questions, just let us know!

[@cesardiaz2798]

+Kuth70 thank u.. very helpful :)

[@GR8GUY54]

+Diode Dynamics Awesome video. I asked about this last year...nice! So where is that 6000k HID kit for a 2015 WRX? Would like to make all my light purchases from you guys. ALREADY have the tail as turn kit with the bright LEDs for reverse. I also would like to match a nice bright front turn signal...basically I need fogs, front turn and this clight. my back looks awesome, can you help make my front look just as nice? I'll order this week.

[@diodedynamics]

+GR8GUY54, we've got you covered! We don't offer a 6000K HID kit for your vehicle, but we do have LED replacements for the locations you are looking for. Below is a link to the fog light, front turn, and C-Light LED replacements. If you have any questions, don't hesitate to contact us! www.diodedynamics.com/store/catalog/product/view/id/22885/s/fog-light-leds-for-2015-subaru-wrx-pair/category/636/ www.diodedynamics.com/store/catalog/product/view/id/22884/s/front-turn-signal-leds-for-2015-subaru-wrx-pair/category/636/ www.diodedynamics.com/store/catalog/product/view/id/23059/s/2015-2016-subaru-wrx-sti-c-light-switchback-led-boards/category/636/

[@jralphroman]

2 months to get this shipped out?

[@diodedynamics]

+J.Ralph Roman Our production team is working as quickly as possible to get all orders shipped out! There is a good chance your order will ship out before then, but we list that as the maximum time frame to ship the orders out. If you have further questions or would like to check the status of your order, please don't hesitate to contact us!

[@Spiralman666]

Can someone tell me the dimensions of these led C-lights, cause i'm interested to adopt them to another vehicle, not subaru wrx?

[@diodedynamics]

+Spiralman666 Send us an email at [e-mail], and we can send you more information!

[@angelicoterminez6261]

having a hard time with the gromment thing how will i do it? help.

[@PotentialEn3rgy]

+Angelico Terminez Same. Would have loved to havee seen this done on the STI!

[@PotentialEn3rgy]

+Angelico Terminez I ended up drilling.

[@diodedynamics]

+Angelico Terminez, give us a call at 314-205-3033, Monday-Friday 9am-5pm CST, or send us an email at [e-mail], and our sales representatives can give you more installation instructions!

[@rmenz84]

So I'm in the process of installing these on my car. What do you recommend doing to fill the gap where the wire is coming out of the headlight (where the 194 bulb was located previously)?

[@diodedynamics]

+rmenz84, we recommend using rubber butyl to seal up any holes in your headlamp. If you have any other questions, don't hesitate to contact us!

[@legitimatex5171]

why nothing in the limited/sti headlight

[@diodedynamics]

+Tim Liston While the base model and Limited/STi headlight are different, installation is very similar and will also work for your vehicle. Feel free to contact us for further installation instructions!

[@gregdickey4517]

how do you seal where the stock parking light housing used to be? thanks a bunch!

[@diodedynamics]

+greg dickey Thanks for reaching out! Please send us an email at [e-mail] so we can discuss this with you!

[@billnye8783]

Do the c-lights come with the ability to be used as a turn signal or is that additional

[@diodedynamics]

+Bill Nye These C-Lights will blink amber along with your factory turn signal; there is no modification or extra harness required for that function.

[@holywarrior_1726]

How do you seal the c-light hole? Sent an email.

[@diodedynamics]

+Aaron Wheeler Thank you for your email! We look forward to assisting you.

[@rpieczynski]

What ended up being the solution for sealing the hole ?

[@holywarrior_1726]

Ray Pieczynski silicone bro

[@rpieczynski]

I'm not familiar with using silicone. Is their a particular kind you used or would recommend ?

[@holywarrior_1726]

Ray Pieczynski I use what I use at work. Clear RTV silicone Adhesive Sealant....can find it at Lowe's or Home Depot

[@batangisip89]

Updates on the DRL harness?

[@diodedynamics]

+batangisip89, our plug-and-play DRL harness should be available in the coming weeks! Thanks for your patience. If you have any further questions, don't hesitate to contact us!

[@zenwuu]

Is it fucking 5 or 6 screws???? this is the first vid I found of it saying 5, others say 6(subispeed) I am mid proccess and only have 5 but its hard to open. not sure if its adhesive or if there is another one. I think there is only 5....

[@diodedynamics]

+Kendall Coates If you still need assistance with your installation, feel free to email us at [e-mail], and we can help you out!

[@jpd3070]

Kendall Coates the six screws are on the base/premium headlights, while the limited/sti are only five

[@jacintogonzalez3200]

that glue do not come off with a heat gun that shit almost broke

[@diodedynamics]

It will take a lot of time an patience if using a heat gun!

[@JustinShinoda]

so lost,

[@diodedynamics]

+Justin Shinoda Please don't hesitate to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or email us at [e-mail], and we can assist you with any installation questions!

[@christianprattx]

Haha just watch the tutorial you made lol

[@FsMegaMan]

Opening them isn't as easy as everyone says it is honestly

[@diodedynamics]

+Pain Opening headlights can be a tricky and tedious process, so for our boards, we recommend professional installation by one of our Authorized Dealers/Installers! Check out the link below to find one near you. www.diodedynamics.com/store/index.php/find-dealers/

[@nissannismo1672]

Amen brother, I just did mine last week and my finger tips are still feeling the pain from trying the pull the lights apart...the bytul is not easy to work with either and one thing I would add and dont ever touch the inside of the lense