How to Install 2015-2019 Chevy Silverado 2500/3500 Illuminated Front Grille Bowtie

[@palerider55]

Good job, man. You didn't waste any time trying to act like a youtube celebrity with a lot of unnecessary talk, you just got right to the job and got it done. Way to go, good how to video.

[@theloweshow3047]

thank you for the kind words!

[@GNOBNX]

DEAD ON!

[@yungin1839]

Man you were so precise & very thorough with the whole process!! A lot of other videos are confusing & leave out parts or don’t explain it well enough. You made it more easier for me to understand how to do it! Thanks again!!! Great video 👌🏼

[@emiliovaldez950]

I had a Chevy dealership install one for me and after a few years of enjoyment, a car wash split the front portion of the bowtie. I can see that only a super small bead of glue was used to put both pieces together. A new bowtie is on its way today and I plan on adding extra glue around the the seams to make sure it stays on. I did get back the part that fell off but a small corner of the bowtie fell into the pit. After I removed the back section/light, I glued the outside to test and make sure it doesn't ruin the plastic before I glue the new one. The glue fogged the clear plastic but not to bad. Plan "B", tape it and then glue it again. The bead of glue just looks messy but you won't see it unless you get close. I'll try a thin brush to apply the glue on the new light. I'll comment again and explain my results. Great video by the way. Very helpful.

[@EdonTheKing7]

Watching this video smoked out, was just as suspenseful as a Michael Bay film. It starts out small but ends big!

[@theloweshow3047]

Comment of the year! Haha thanks

[@randyholliday237]

Thank you.. the instructions seemed like it would be so much harder but you made it so simple. Great video

[@theloweshow3047]

Thank you. Glad this helped

[@jamespenniii5037]

Thanks for the vid, it helped alot. However the stupid stock GM connectors fought tooth and nail to fit the ground and positive prongs.

[@richpalmer7662]

Just bought the 2020 Silverado RST and this is exactly what i wanted to upgrade. Thanks.

[@isaacramos6785]

Badass . Thanks for the video . Definitely helped me out when it time to install mine next weekend on my 1500

[@theloweshow3047]

Thanks glad you liked it

[@ericrashaw8752]

Did this fit on your 1500? I have a 2018. Just making sure before I spend the money

[@viajeconchuck7345]

Great vid. Ordered the bow tie for a 2021 Yukon. I believe it's the same principle. Can't wait to give it a go with your video to help along the way.

[@theloweshow3047]

Awesome. Good luck!

[@I1IWEBB1]

Thank you for your time. Straight to the point!

[@AIRBORNE611]

Great job, but you could have placed a grommet in the center hole, just an added thought for a lasting install.... 👍👍

[@theloweshow3047]

Very true! Good idea

[@orlandowhite3271]

Great video made it super easy!!!

[@FlyEaglesFly19111]

If they made it with the 100yr anniversary badge I'd get one. I already changed to the 100yr anniversary badges. I do like that illuminated badge.

[@theloweshow3047]

I love the illuminated bowtie!

[@Squid611]

I am going to be purchasing a 2007 Chevy Kodiak 4x4 Monroe conversion pretty soon. I want this illuminated bowtie to be one of the f just things that I do. Anyway your video is very helpful and at least gives me an idea on how to get it started

[@theloweshow3047]

Enjoy!

[@EvolvingMale]

Thanks for doing the video. You did a fantastic job. Love you're comment about being Psycho with the wires. Me too!

[@user-tj9ks1zv7k]

Looks great. I wish I had this on my midnight edition.

[@theloweshow3047]

Very easy to do your self. I highly suggest it

[@stevecarter7958]

No, it's not been made as of yet. I would love to know when they are released, and who will make them. Thank you

[@chrisr8947]

Feeling aggravated as hell. The wires from the bow tie either won’t go far enough into its half of the harness piece to make contact or the harness connector is crap. Just about to clip both ends off. Lol. It works. I tested it.

[@theloweshow3047]

You may have to make tour own connector or just use butt connectors and heat shrink?

[@jose9899]

@@theloweshow3047 I had the same problem, was trying for like an hour. finally I just ended up taking out the white part inside where you first slide the wires through and they slid right in, then I slipped the white part back in. worked great.

[@jerryt4053]

Great job thanks from Fontana Ca 👊🏽

[@EduardoLopez-uv5jn]

Great video, very helpful!

[@chrisr8947]

Just got my bow tie in today and installing tomorrow. By chance is your shirt Worthington, MN Fire & Rescue? I ask because I just came back from there. Was there May til last week for a wind project job. 😆

[@theloweshow3047]

Haha yes sir! Im a volunteer firefighter

[@chrisr8947]

The new brewery there is the tits. Owner and his son are pretty cool. God I wish the Ground Round would add some pizazz to their menu. Lol. I’ll be emulating this install tomorrow. Thanks for the tutorial!

[@bjmiller7441]

I can’t get mine to work, the pins from the emblem are sticking through the white part. I checked with the dealer and all they could tell me that it’s not “grounded” but they were able to test that it actually works. Can you elaborate on the part where you said you needed to push the white clips aside while inserting the pins? Maybe that’s where I went wrong? I didn’t move any white clips aside.

[@bjmiller7441]

Nevermind got it, those pins need to go through pretty far, to get the right leverage I grabbed the back of the pins with tweezers and pushed the pins through.

[@theloweshow3047]

Glad to hear you got it taken care of

[@4lifechargersfan]

Great video been trying to find a video for this exact thing 🙏

[@theloweshow3047]

Glad you enjoyed

[@brianmurra9744]

Have you noticed any dimming of the headlight since you’re robbing power to light up the bow tie? Great video btw! Looking into this.

[@theloweshow3047]

No, i have not

[@NeverEnoughPyro40]

Why would you think there would be any dimming, These emblems are LED! You can practically run LED lights using a potato!

[@brianmurra9744]

@@NeverEnoughPyro40 never know 🤷🏼‍♂️. I just didn’t want one dimmer headlight.

[@elden8785]

Hi where can I get on for a 2016 Silverado

[@carratala59]

Wow, great. Thank you. Outstanding video

[@theloweshow3047]

Thanks for watching

[@PremiereProjects]

Just wanna make sure before I order the kit would it work on a 2019 . Did an awesome job man

[@theloweshow3047]

Im not sure. You might have tp research thst your self

[@jose9899]

I just installed mine in my 2017 Silverado . seems to work but now my headlights won't turn on unless I turn them one manually. any ideas ????/ great video and thanks

[@theloweshow3047]

Sounds like somethings goofy. Mine turns on whenever my headlights are on!

[@ValenciaStatus80]

Nicely done, thank you!

[@nesco7615]

FYI I’m Hispanic. I have to admire you white boys. You don’t fuck around you make that job look like it was straight from the GM plant itself. Your video is perfect. You can’t blame us for trying to jump the border. Make America great again? What you guys talking about. This country has always been great that’s why we want to be here. Great job in the video. I’m doing this on my 2020 Tahoe. Thanks bro. 😜😉👍🏽👍🏽🇺🇸🇺🇸👍🏽👍🏽

[@mattr7715]

Wondering if that will fit my 2007 Tahoe?

[@Iwtni06]

That look’s awesome!

[@theloweshow3047]

Thank you.i love it!

[@garycasamento7374]

Awesome. Using this for my 2018 Silverado, TY

[@theloweshow3047]

Enjoy!

[@curtisjames2443]

I wonder if this would be possible to do on a 1999 silverado

[@theloweshow3047]

Possibly!

[@alexkinkaid3245]

Great video and looks amazing. I just got it for Christmas, but I live in NY and I have a plow on my truck so the plow harness is using the headlight harness already. Do you know if it’s still possible to plug the bowtie in to get power with a plow harness installed?

[@theloweshow3047]

Im sure you could make/find an adapter that allows for that to allso be plugged in as well. Good luck!

[@NeverEnoughPyro40]

It was still plug in as it was intended, But instead of having one harness tapping in for power you will have two!

[@515002]

Hello, You said this lights up blue? it looks clear when lit. I ask because where I live, blue would be illegal.

[@theloweshow3047]

It is white with a tinge of blue. Almost like a 5000k led bulb

[@lberning]

Very helpful video, thank you

[@theloweshow3047]

thanks for watching!

[@mikeroeder]

Thanks for the video. I'm thinking about doing this to my '19 Blazer RS so it was good to see an installation.

[@PetterFrayre]

Would that be the same process for a sonic chevrolet and how do you order the cables the female cable

[@theloweshow3047]

You will need to check and see if they offer a kit. The kit will include everything you need!

[@PetterFrayre]

@@theloweshow3047 thanis bro

[@davidbrauch1213]

Is it possible to change the color of the light? I want to do red but I don't know if taking it apart or changing the bulb or LED is feasible

[@theloweshow3047]

You would have to solder in red leds im sure

[@3000Degreez]

I liked the video. Can one be installed in the back? And do they have chrome bow ties?

[@theloweshow3047]

im sure you can find a chrome bowtie!

[@lazaromartinez6463]

Done a great job

[@TurtleTime1]

It’s not super bright. Do you know if there is a way to make it brighter because it seems very dull.

[@theloweshow3047]

no i dont, however its not meant to be a light per say, its more of a "look" than a usefull add on.

[@rosaliorosales610]

That was awesome thanks man I nap can install my bowtie 💪🏽

[@theloweshow3047]

Good luck!

[@TheGreatOne2922]

Great video.....what bulb do you have on your projectors?

[@theloweshow3047]

They are LEDS

[@jhonfenelon7409]

hi,I have a 2019 Chevy Silverado 2500 HD, I bought the kit and I believe I have done the installation right by followed your all instruction but I can't figure out right by saying enter the pins to the connector, but we need to move the 2 white pins over, can you please tell me how do I prime the 2 white clips over?

[@theloweshow3047]

Im not sure if i entirely follow what your saying, sorry

[@southflfiremedic]

Nice. Hey brother, I have a 2020 1500 Z71 crewcab, short bed. Do you think the installation is the same for my year/make/model? Thanks and be safe!

[@theloweshow3047]

Im sure its similar. But i would think the kit would be different. I'm sure GM has a kit available for the new ones!

[@rockyde9547]

Very nice video.

[@theloweshow3047]

thank you.

[@bigcat.mattyahoo]

Looks white light video u reference it to b blue light is it just your lighting or????

[@theloweshow3047]

All the lighting is 5000k so its "pure white"

[@timalbertson2471]

I've seen an illuminated bowtie for the tailgate. How do you install that one?

[@theloweshow3047]

That I'm not sure of. Sorry

[@stevecarter7958]

Can you tell me if you can get a 2020 Chevy Silverado 3500 Illuminated Front Grille Bowtie

[@theloweshow3047]

I'm not sure if those are released yet but a simple Google search would be able to tell you

[@yonvm]

Will this fit the 1500 I was told yes with mods like cutting a few things like the taps

[@theloweshow3047]

Maybe?

[@1bigchico]

Will it work for 2015 Chevy Tahoe

[@theloweshow3047]

Possibly

[@markgibson5163]

The truck looks bad ass 👍 and do you know if it's available for a 2014 chevy impala LTZ

[@theloweshow3047]

Im not sure if GM made it available for other vehicles. A simple google search would more than likley answer your question. Good luck!

[@MichaelSmith-wj5bu]

Nice video

[@theloweshow3047]

Thank you

[@Choppy_76]

The wiring harnesses was clipped to the light?

[@theloweshow3047]

It comes with tbe light.

[@anthonymckenzie4234]

They make this for 18 Sierra ?

[@theloweshow3047]

I think they do. Just need to find the right kit

[@UnknownGodKing]

Does anybody know if I can put this on a 2013 Chevy Cruze?

[@mfcj09]

Will this work on a 2024 2500hd ltz with the new front end?

[@theloweshow3047]

@mfcj09 I doubt it but I bet they make a new kit for kt

[@ernestovaldes3480]

Good job ...

[@scottrunkle6651]

Does this illuminate with the daytime running lights, or do the headlights have to be on?

[@theloweshow3047]

It is with the headlights.

[@johnford938]

Would that work for a 2002 Chevy Avalanche Z71

[@theloweshow3047]

I don't think so but it would be worth investigating!

[@danielmartin399]

De donde son ustedes quiero ponerle algunos accesorios a mi Chevy

[@koltgunnerson333]

What kind of headlights are you running, LEDs?

[@theloweshow3047]

I will be posting a video on those soon. Subscribe and stay tuned!

[@Freewheelerful]

Quick question...Is a rear illuminated Bowtie available??...Thanks

[@theloweshow3047]

Not to my knowledge!

[@oscarpastrana83]

Love it I need help on it

[@kazouavang3472]

Will this fit the 2018 z71?

[@rjyokum]

Looking for a reasonable option for a 2006 Silverado HD but over $350???? Damn

[@williepalmer8320]

Do they sell the emblem to fix the 2010 tahoe..

[@theloweshow3047]

Possibly!

[@azoozrajab8991]

Bro i wana buy for Tahoe 2007 LTZ please help me out🙏🏻

[@theloweshow3047]

If they have the kit available then it's really easy!

[@coltseavers5183]

Did you you find the one for 2007 Tahoe? Id like to do this to mine

[@azoozrajab8991]

@@coltseavers5183 nop

[@jinorcano4214]

does this fit for a 2017 chevy tahoe??

[@nealgirdhari2492]

Would this work on a 2015 Chevy Suburban LT?

[@theloweshow3047]

If they make a kit for it. Then yes it would. However this particular kit is meant for the trucks

[@erickramirez7432]

En donde puedo encontrar los emblemas ayúdeme x fabor

[@roymarin8074]

Where do i find that wiring adapter

[@theloweshow3047]

The adapter should be in the kit

[@TINTfolk]

Where can I find one that fits a 2015 Chevy Impala ?

[@theloweshow3047]

I'm not sure if they make them. Google search could tell you!

[@jeffg2742]

Do they make one for a 2010 Chevy 1500

[@theloweshow3047]

I think they do but it will be a different kit

[@Franklin_2794]

Bad ass 👍👍

[@theloweshow3047]

Thanks for watching

[@3000Degreez]

Do you have an update to show when you installed the rear emblem & was that illuminated as well?

[@theloweshow3047]

The rear is not illuminated

[@3000Degreez]

@@theloweshow3047 can a one be installed in the rear

[@theloweshow3047]

@@3000Degreez if you got creative enough yes. However there isnt a kit available at the moment

[@SaintMichael1591]

By any chance do they make this for a 2011 Chevy Suburban? If so, can someone provide me with a link.

[@theloweshow3047]

You would have to do some research. I'm not sure

[@leonardobaeza2165]

Where can we order this or do you sell them and where do you live.

[@theloweshow3047]

These are available online!

[@leonardobaeza2165]

Can you give me the website please thanks

[@theloweshow3047]

@@leonardobaeza2165 the link is in the video

[@taddhoward9975]

Will this fit a 2014 3500 HD?

[@theloweshow3047]

If its the same body style as mine t should!

[@mikemorris4958]

There's only 4 bolts. Those bottom two go to the headlights.

[@theloweshow3047]

Good to know thanks

[@whocaresstone6627]

Nice

[@drsuggs]

Does anyone know of a kit similar to this that will work with a 06 tahoe

[@theloweshow3047]

I'm not sure if they make one? A simple Google search would tell you alot. If it doesn't pop up then I doubt there is wine available

[@Mr_Ruhl]

Blue lights will get you tickets!

[@theloweshow3047]

Its not blue. Its more of a "pure white"

[@jeffg2742]

Where can I find it at

[@theloweshow3047]

You may have to search NNBS led bowtie

[@reedrobb]

amazon per the part number The Lowe Show gave you. Hold for the next bit of news...$268

[@davidrayman3576]

Hmmm all the links are Spanish and the bow tie comes out to $650 lol think I will skip the links and grab it from GM's site for $235

[@theloweshow3047]

Really? I got mine for 180 somethimg on amazon. Its an Amazon link i thought

[@reedrobb]

All right guys... you could probably build one of these with a simple water proof light kit and a piece of Plexiglas for less than $50.00. You could get an LED kit that strobed, flashed, changed color etc. Build a spacer from clear Plexiglas and imbed the LED. All right guys... let's see someones creativity instead of a factory kit for $268.

[@powwow1218]

^^

[@thomlimoservice]

Can you do for me Please

[@malbe72]

You didn’t have to remove the grill

[@theloweshow3047]

Enlighten me how you'd get to it without doing that

[@mitch50100]

How do you grow such a good beard?!

[@theloweshow3047]

how did you get so buff and rich!?

[@kevinkazz7231]

I bought mine for like 22 bucks on wish fk amazon holy frig!!

[@theloweshow3047]

Yea its gotten out of hand. It use to be only 100 bucks

[@thomlimoservice]

Where you live

[@prestoncheapbtheadphoneste3010]

That’s ok. Too much work! 😕😐

[@theloweshow3047]

Really easy!

[@GNOBNX]

HOT 💩!

[@theloweshow3047]

Thanks

[@GNOBNX]

@@theloweshow3047 You’re welcome bro’!👍🏾 Your approach is definitely the truth…Keep up the awesome no bull way of sharing content.

[@blue4980]

$690 no thanks eBay has them for 20 bucks

[@theloweshow3047]

Im not sure why the link is that price.... when i bought it/posted the link the entire kit was 180 dollars

[@tw8644]

$600. Cool but not 600 cool.

[@theloweshow3047]

i believe i only paid 180-200, that link may be outdated and you may need to search for an updated price.

[@Swanlord05]

Will this fit a 2008 2500HD?

[@theloweshow3047]

Possibly