How To Install 6” Rough Country Lift Kit 01-10 4x4 2500 HD Silverado/GMC

[@truckmastergarage9944]

Lift kits are available at our website click here 👉 truckmasterdiesel.com

[@irvwayshort9566]

You almost had me with that squatted truck bit. 😆

[@crosescott7949]

i about closed the video when u said Squatted Truck. lol great video, truck looks great man!!

[@shahidvelji9550]

Thank you for the video, this will be very helpful; have a lift job coming up this week first one ever so this will be huge

[@WestMichiganJigCo]

All of ur mods really tied that truck together!!!

[@CesarGonzalez-qu8uh]

Can’t wait to see what this look like on my 99 single cab 2500😊

[@ErikTexas]

That red glossy powder coat looks nice 😎

[@CesarGonzalez-qu8uh]

11:50 man i was about to start coming up with all kinds of comments 😂😅

[@VictorCruz-ub9ds]

Nice!! Didn't think it was that much work. Truck looks awesome!! Maybe one day I'll do mine like that! Great video too!

[@garyjohnston6321]

Dam watching this vid and seeing those rims has got me kicking myself in the ass. I just replaced my old 22's with the same Visions except I went 20" matte black on my '01 Sierra thanks to winter salt and no winter rims. Great video tho it helps simplify the process, I had to use the RC video as my reference which lacks some of the hidden details that you cover. Jealous of the lift sure makes the job a lot easier I bet. Cheers

[@RAVENKILLB]

The idea channel for me

[@MGMCLL]

Great video man!! 14:11 don't forget the lower shock nut lol

[@truckmastergarage9944]

Thanks

[@MGMCLL]

@@truckmastergarage9944 bro I see you have a l5p I been wanting to trade my 2014 denalihd for a l5p but I been seeing lots of videos on here with this tick tick notice coming from the block, wtf! Does yours have that too?

[@qdmax11]

Dang brother she’s clean!

[@truckmastergarage9944]

Thanks!

[@MGMCLL]

Fucking right!

[@zacharynowell4978]

I'm using this video as a template I'm in the process of installing sake lift on my 07.5 lmm I'm glad you put this content out! Will say I wish I had a lift like yours would sure be easier than rolling around on my creeper.

[@justinmcelroy9669]

How did it go?

[@zacharynowell4978]

Didnt ho bad got it on at my own pace ofcourse and added some kryptonite upper control arms new hubs new cv axles new lower control arms because the bushings were wore and just better to replace whole alomg with slotted drilled front rotors and new towing heavy duty pads new steering stabilizer and new kryptonite death grip tierods since i couldnt figure out what aftermarket brand were on there and needed replacing in all probly took about 2.5 months mostly waiting on parts for 8 weeks though turned out awesome only thing left is getting the brace bars i bought extra installed been working otr so havent had time

[@justinmcelroy9669]

@@zacharynowell4978 nice thanks for responding, planning on adding in some kryptonite parts myself

[@zacharynowell4978]

Oh yeah no problem if you do decide to get kryptonite make sure you order well before your ready to use them i didnt decide till later really glad i did now

[@justinmcelroy9669]

@@zacharynowell4978 👍🏻👍🏻

[@ronhelman3985]

Outstanding Job on the lift kit. That's one Sharp looking Truck. 👍👍👍👍👍

[@Dirtymax2007]

Truck looks amazing! Can I ask where you got the front bumper and what it’s called thank you

[@johnnyyoder2685]

Wow. That's what on my mind. 6 in lift on my 3500 hd 08 Duramax. I am not sure how to do it with out a lift to get job done. What do you think???

[@ronaldbabbitt6318]

Got a diesel building, taking care of an awesome 2009 GMC Lmm ”u know what” for my HSP Intake and air dog 165 running great . 31,650 great condition 40k on it, been infatuated with all that is Duramax ever seance 5 years now and at 129,659 and running best it ever has 🏁 Great informative and never done building my lmm Duramax brother

[@Eli-dt4qg]

🤔

[@shannonp4037]

Bought my 09 LMM about 6 years ago with 206,000 miles. Drove it over 100K more and gave it to my son who has put over 50k more on it. We are around 370,000 miles. Minor and major issues have come up but nothing you shouldn't expect over 300K. We "turned of" the EGR instead of deleted it because of the CEL. Normal leaks and wear items. Starter, batteries, alternator, shocks, brakes, coolant leak at the clamps, oil pan gasket, transmission gasket, replaced the original exhaust at around 300K, etc. The biggest thing is that at around 350k the transfer case broke a "fork" and cost $1,500 to fix that and replace many tranny lines since they were original. Long story short, great truck but be prepared to spend a few thousand per year after 300K. FYI, we live in New England, the "rust belt".

[@cliff7536]

I went with a control arm lift and dig how I don’t have a wider stance, and don’t have to use spacers on the rear.

[@marklengal9990]

Do you think RC is better then a pro comp lift? Looking for a smooth ride after the lift

[@truckmastergarage9944]

I have both kits, the pro comp one is on my older Silverado but I think they are very similar in ride quality

[@Hammerdown487]

Hey that RC torsion bar bracket drop that you have to drill bolts for, what’s the part number I can’t find it online, is it also for 02-18?

[@hddm3]

Perfect highth how hard would it be to level it. Just crank it up a little or would you add something

[@albertorodeos497]

is there a reason you inverted the rear shocks ?

[@christinasmith8903]

Glad you were joking about making the truck look like it was taking a shit

[@zacharynowell4978]

You by chance have a measurement from the ground to under the rocker panel curious as to how actual high the 6 inch makes the truck as i want to lift my lmm what made you go woth blocks instead of replacing leafs with new lifted leafs?

[@JohnDoe-yj9tj]

Whats the wheel offset running? Looks good with the chrome and red combination

[@jjbuettner]

When I install the rough country lift kit like yours would I need to worry about installing a dropped pitman arm?

[@philvictor5537]

I think we need to see the truck vs the cat eye tug of war next

[@eagleeye10m95]

Awesome dude! I can't wait to lift my 2012 Chevrolet Silverado 4x4 6inches!

[@AaronHallcm]

For gas engine install, it mentions on the RC site "exhaust reroute modification may be needed for front driveshaft clearance" any insight on that? I have a 2500HD gas and looking at installing this kit. Thanks for the video.

[@KingRanchW]

does this apply for a 7.5inch rough country lift on same body style lml

[@truckmastergarage9944]

Yes it’s very similar

[@jakeh9384]

Now I’m thankful my jeep is so easy to lift 😂

[@builtbyme]

That truck came out great. Very good install video to. I remember doing my lift kit and even tho it was a different brand it was still the exact same install. I would like to see a video on the lift springs you have on the lbz without the blocks. Kinda want to do that to mine and have actual lift leafs instead of blocks.

[@albertorodeos497]

hi there I'm installing same kit I'm lost on the rear blocks on my kit there is one side larger then the other which way are this blocks are install?

[@truckmastergarage9944]

The shorter side faces foward

[@albertorodeos497]

thanks I'm getting close to Finnish i like all your videos learn a ton I'm also rebuilding a LMM and you have all the information fist time working on a diesel engine and it's something else

[@jerrybrawley5160]

Epic Content, absolutely love the more in depth videos like this! Rough Country makes a really great product, I have used there products many times.

[@MGMCLL]

11:47 i was about to say! man did you get dropped on the floor when you was a new born 🤣

[@beausmith3900]

I've really been enjoying your content, this was cool to watch, I like the direction this truck is going. I'm thinking it might be a good idea to linex the rocker pannels..panels... linex can color match, so you can stay red, might be a cool way to do the bumpers as well... thanks again

[@stevekang573]

Think the right one is correct the left upside down?

[@shannonp4037]

Keeps the axle from twisting.

[@lsgt5132]

I have a 2008 1500 that had this loft. Do once that braket is cut truck is done as far as going back? I bought this truck lifted and want it back stock or lowered maybe a tad to build a 4x4 turbo street truck. Can this be done now?

[@tonylgorille9256]

Might want to check on the 1500 videos since its not the same kit

[@David-yy7lb]

The worst thing GM did was to put IFS in a HD truck🤦🏿‍♂️....dam that turbo sounds awesome 👍🏿👍🏿what kind is it??

[@josebivian1777]

Hey truck master how is the ride quality?

[@stevenpellegrino997]

Can you tell me basically what type of tire and wheel size you have with what size spacer. I'm looking at doing a 6 in lift on my 02 Duramax. And having trouble figuring out wheel and tire size. I might go 18 to 20 rims in summer. But I'd like to run a factory style rim in winter. Because of road salt. And I do snow plowing with my truck. So I wanted to get nice chrome 18-20 for summer. The maybe run a cheap set of steel black wheels in winter. What do you run in the winter. Do the salt a lot there. In near Cleveland Ohio. We salt a lot when we plow. I just started using fluid film. I'm gonna spray black fluid film on my whole frame this spring. Put on a new southern bed. And a 6 inch lift.

[@dieseldelany71]

You wouldn’t by chance have the bracket you cut off the truck would you I’m trying to find one for my truck

[@nickjordan7095]

I thought you were serious about the squat 🤣

[@tg6301]

In doing my lift, the front driveshaft doesn't pull forward very easily to reach new diff position. Did you change the boot at the transfer case/drive shaft connection, this seems to be the factor in pulling it forward??

[@bradywrubel4305]

I’m having the same problem currently what was ur fix??

[@tg6301]

@@bradywrubel4305 pull hard to stretch the boot enough.

[@dave-o4157]

You almost triggered me with the squared truck joke hahaha jk. I really wouldn't have cared. I just needed to see the front install. Have an '09 2500 HD. Bought the same kit.

[@yoodexxter]

What setup are you running on this truck?

[@agustovelazquez593]

Look very nice

[@atheist629]

How long did the install take? Thinking about doing this to my '08.

[@riveraf5053]

Can you use your 4x4 with that lift ?

[@nellaob4229]

Where are you located? Do you still do this work? Thank You

[@jamesdavenport5464]

Looking awesome

[@ODR1PPY]

Is it possible to do a 6” lift on a 03 gmc sierra 2500 2wd???? It has torsion bar

[@tonylgorille9256]

Website says it works too for 2wd it comes with clear instructions too

[@ODR1PPY]

@@tonylgorille9256 okay, I just went with 3” and got set of 20x10

[@stevekang573]

Why the rear shocks different

[@DTruth850]

How much was the installation ?

[@MrR0sch]

So if you where to go with the BDS kit with the fox dampers, do you get a smoother ride than with this RC kit? Anybody know?

[@smokingas8498]

What size rims and tires r those

[@nwcarpenter2878]

Rear wheel spacers?

[@GuffeysAutomotive]

How long did it take to install?

[@coreymaynard6153]

Doing this same lift on a 2007.5 gmc duramax. Not gunna lie. It's kicking my but lol

[@Rotte916]

Do you have the old crossmember still that was below the front diff? I’m looking for one on my 2007.5

[@fattyboijo9837]

“Drop it on a table” I only own a jack and dropped it. DO NOT RECOMMEND

[@fawkurface46]

man I almost stopped watching when you said bout squatting the truck. lol

[@thomasvizcainco5658]

Great job., but to much work to do by yourself and on the floor, I would rather pay to get it done

[@Doggo_Norse]

yeahhh...nvm, i dont think i can do this 😂

[@ToddA80]

IMO this is your best looking truck. Until you lift that L5P.

[@evansteele5346]

The truck at the end is a gay hicks dream.

[@donearl6675]

👍👍😎❗

[@dunner8125]

Does my guy not like his eyes

[@flattenthecurve8623]

I thought you were actually going to make your truck gay for a minute there.

[@masterflow101]

One ugly as truck. Will never see mud nor offroads. And it's a shitty I mean chevy.