How to Install a 2" Leveling Kit on Ford Superduty

So this is how you install a Motofab 2" leveling kit for 99-2016 Ford F250 Superduty ! Skill requirement is a 3 out of 5 and installation time with air tools with only 1 person is 45 minutes. Motofab leveling kit available on Ebay for peanuts. #ford #superduty #levelingkit #liftkit #offroad #howtovideo Andy House 1-936-414-2295

[@albertvillarreal3369]

Thank you for the video. I didn't understand where this particular block went .

[@toons3115]

Perfect video thanks 👍👍👍👍👍

[@bruce-bruce7975]

I have watched this many times. That looks mighty good. Love them tires. Your spacer is upside down though. Should be okay I guess.

[@SINSTER7THREE]

Yep spacers were installed upside down

[@BackFire10mm]

Hi Sir nice truck, I have same. Question. Why did you decide to use the lift spacer instead of taller springs?

[@SeanBrennan007]

Why do the springs look like they are bowing forward, this isn't normal. I've done spring upgrades on several Super Duty's and was shocked to see this on yours. Maybe something that you want to take a look into why it's like that. Personally, I don't think it's supposed to be that way.

[@Hateeveryoneallthetime]

It’s a camber issue. The axle tilts forward after the lift. That is fixed with a radius arm drop bracket.

[@leewebb7]

hi...I just put this kit on yesterday..I'm sure it's fine...but the instructions say put the chamfered side down..

[@chadkennedy529]

Bud you put the damn spacers in upside down. Lol

[@cookiemonster3146]

Were you able to use stock shocks? Or did you have to use longer ones?

[@jacobnaeyaert9417]

You can use your stock ones but your better off replacing them with better longer aftermarket.

[@chadkennedy529]

Shock extensions. Kit usually comes with them.

[@mitocaf1]

Can u fit 37s?

[@GunnyRappUSMC]

Track Bar adjustment? New Alignment? Spacers?

[@Backyard.bandits]

mike rapponotti iv been wanting to know this, I have a 2011 f250, i did a 2.5” leveling kit, I regret it, wished I would’ve done a 1.5” or 2”, my drivers side wheel was sticking out a bunch and I guess it’s because of the track bar, I’m removing mine and going smaller

[@lonniefreeman4278]

Anything bigger than 2in will give you issues right from the start, eat up tires and destroy the front end. Need to install correct shocks, spacers alignment.

[@USAF99]

I hope at some point you bought and installed an aftermarket track bar mount. Changing the front end geometry of these trucks by moving the differential down two inches will put it in a bind and give you a ton of bump steer. You may not even feel it initially, but you're wearing out front end parts at a highly accelerated rate!

[@xXEYSPENXx]

I heard it was 2.5 max anything higher you put wear on the front end 🤷‍♂️

[@retired40frmcryp57]

Pretty sure the spacers go on top

[@SineMacula]

Just got mine..... Just to let you know you put the spacers upside down. Hope it didn't damage anything, thanks for the video tho.

[@drlifestyle1817]

So the spacer goes at the top

[@brocktherock9299]

The spring looks kinda wonky, did this ever straighten back out or did it stay kinda funky looking? Just curious I was going to purchase for my truck but dont want springs sitting in an S shape.

[@gt40forsale]

They will have a bow in them..even when u buy replacement lift springs

[@brocktherock9299]

@@gt40forsale ok, thanks for the quick reply back.

[@Griffinn-_-]

did you have to compress the spring to put it back in?

[@slownbroke6582]

Just a heads up, this video is only accurate for 05+ trucks, not 99-04. 99-04 trucks still used leaf springs up front. Otherwise, great video.

[@marco4081]

not if its an i beam suspension. i have an 03 and it was just like this except the block goes on top right under the spring

[@dieselboii8537]

your half right and half wrong. The f350 4wd have leaf springs on the front however the f250s dont have them for the years 99-2010 he showed

[@Stonks93]

How has this leveling kit held up for you? Thinking about ordering one

[@gt40forsale]

Held up excellent its my employee truck

[@folsomblues1317]

The 05 all the way up too now can run a 35 stock

[@brandoracer21]

Not true. my 07 f250 rubbed bad with 35's

[@joel5716]

@@brandoracer21 it depends on your wheels and offset etc

[@ImDead1nside]

I’m on a stock 2019 on 37’s fits stock but rubs when turning on an incline . 35’s should fit just fine

[@dunnoyolo2238]

Your better off upgrading the coil springs spacers are not that great.

[@dustinrempfher2287]

God dam that looks scary ad hell.. spacer on top not bottom

[@randymarshall1267]

You showed no actual work ,WTF

[@ulisesrodriguez2994]

Se ve feo tu video camarada