HOW TO INSTALL A BACKUP CAMERA IN A FORD F150 2003

[@AfflictorTV]

Your video took me from point A, to point B, without missing a hitch. This was the most simplistic install because of your video. I can't thank you enough! 3 years ago, still coming in clutch in 2024, thank you, Sir!

[@SwimmingintheDeep]

Came here to find a pass through point for my wire for my 2003 F150 and was not disappointed. Thx

[@bluestar99playz11]

Best explanation out of all the others for these trucks, thanks alot!

[@DanteDelgado-vv7sm]

Excellent detail!

[@forfonk]

What radio did you install, and what camera? Thanks!

[@Ohsage1111]

What camera are you using? Link? Thanks.

[@reneramirez8922]

The wiring from the back are connected matching the rca colors. I got the black wire to the chassis ground, and the red wire to the back trailer red wire. I would like to find out if the connections are correct or not.

[@BiggestCuh]

I think the red has to go to the switched brake light on the trailer harness please let me know if it works

[@reneramirez8922]

@@BiggestCuh that's how I had it first before, now I have both red rca wires together just like the video with the black grounded to the screw on the chassis. The lights will still turn on with ignition on.

[@BiggestCuh]

@@reneramirez8922 I tapped both red wires to the black and pink rear light wire and it worked for me

[@mayorhp]

Thanks for the video. Will be doing this Wednesday

[@CraigHagan]

Great video. Well done. I'm new to F150s from Jeeps and this was helpful

[@ericvansyckle3137]

Great explanation! What model radio is installed? Do you have a preference?

[@jamisenpeeler5251]

Can I get the name of the camera

[@reneramirez8922]

I have installed my backup camera license plate on my 2001 ford f150 and everything works great. Except for one thing that the led lights on the backup camera turns on even on daylight when turning the ignition on. How can I get that fixed? If someone knows how to fix this issue let me know pleace thank you.

[@BiggestCuh]

I have the same issue

[@BiggestCuh]

I think we have to wire it to a switched wire there is one in the trailer harness I’m gonna try it and see if it works

[@concealit4800]

What size headunit is that?

[@Martyimgay]

I’m wanting to wire my camera so I can see my trailer when I put it in reverse and also when I’m driving down the road how do I wire it 2001 F150 Supercrew 5.4

[@ghostlyrich]

You could run your camera to the back of your truck and have a Deutsch connecter or any other waterproof connecter right there at your hitch so that way you can disconnect it when disconnecting your trailer. The hardest part will be the RCA portion of it all you might want to just buy an extension piece to put in between there.

[@Martyimgay]

Not sure it will work

[@handymanhogan6882]

I cant fugure out why everytime I put in reversemy AC and camera blow the fuse.. I installed a new cam power from deck to the rear. It worked for a while. Is there somtihing am missing?

[@ghostlyrich]

If you have a volt meter make sure the power wire isnt grounding out. Sounds almost like the wire your grounding out is grounding when its be activated. If it worked fine before it could be the camera it self is causing a internal short

[@reneramirez8922]

I just disconnected both rca red wires from the back trailer red wire. Connected only both red rca wires together by itsel now and still the led lights still turns on at daylaight with the ignition on.

[@bakermaann1]

nice, ty

[@nathanmalbrue2924]

You sound like Jason Bateman lol that's cool

[@rwwaln]

Hi I known it is a Sony but can't read the model, could you please list it, thank you

[@cashcofer4095]

Sony XAVAX1000 6.2"

[@Hadfield420]

You can just run it to the reverse lights

[@JoeyChrome]

1:17 He says "ssssthnaaaaaake" LOL....But nah good video, thanks for the info Bro !

[@tyjones1978]

I didn't hafto ground my backup camera.. 2001 f150.. Go figure🤷

[@lucassquire4768]

Lol! Doing the same thing also in BC